Gebruiksaanwijzing /service van het product RPC-2 van de fabrikant Bay Technical Associates
Ga naar pagina of 88
OWNER’S MANUAL _________________ BAYTECH REMOTE POWER CONTROL UNIT FOR MODELS RPC-2 RPC-2A RPC-2 MD01 RPC-2 RDR RPC-3 RPC-3A RPC-5 BayTech Manual Publication #U140E125-03 July 1998.
ii Copyright 1998 by Bay Technical Associates, Inc. BayTech, Telplex, LaserShare, Print Master and TRAN-X are registered tradem arks of Bay Techni cal Associates, Inc. IBM, IBM PC, IBM PC/AT, IBM PC/XT are products a nd registered trademarks of International Bus iness Machines Corporation.
RPC SERIES OWNER’S M ANUAL ABOUT THIS OWNER’S M ANUAL __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ iii ABOUT THIS OWNER’S MANUAL This document provides information re quired fo r installing a nd operating y our Bay Tech equipment.
RPC SERIES OWNER’S M ANUAL ABOUT THIS OWNER’S M ANUAL __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ iv The information in this document is subject to change without notice.
v .
vi CHANGE OUTLET NAME .............................................................................. 34 RPC-3, R PC-3A, AND RPC-5 .....................................................................
vii #$ ! .
RPC SERIES OWNER’S M ANUAL INTRODUCTION TO THE RPC SE RIES __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 1 INTRODUCTION TO THE REMOTE POWER CONTRO.
RPC SERIES OWNER’S M ANUAL RPC SERIES QUICK S TART (RPC-2 AND RPC-2A) __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 2 RPC SERIES QUICK START “Quick Start” is designed for users familiar with BayTech products who need a fast setup and familiarization.
RPC SERIES OWNER’S M ANUAL RPC SERIES QUICK S TART (RPC-2 AND RPC-2A) __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 3 If the status menu fails to appear, ensure the correct cables and adapters are being used and that they are connected properl y.
RPC SERIES OWNER’S M ANUAL RPC SERIES QUICK S TART (RPC-2 AND RPC-2A) __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 4 Change Password Default password is <cr> . The maximum field length is 8 al phanumeric characte rs.
RPC SERIES OWNER’S M ANUAL RPC SERIES QUICK S TART (RPC-2 MD01 AND RPC-2 RDR) __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 5 RPC-2 MD01 AND RPC-2.
RPC SERIES OWNER’S M ANUAL RPC SERIES QUICK S TART (RPC-2 MD01 AND RPC-2 RDR) __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 6 Using the RJ04X007 (RJ-11) modular cable, connect either port labeled “LINE ” on the RPC unit to the te lco wall jack .
RPC SERIES OWNER’S M ANUAL RPC SERIES QUICK S TART (RPC-2 MD01 AND RPC-2 RDR) __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 7 Controlling Receptac.
RPC SERIES OWNER’S M ANUAL RPC SERIES QUICK S TART (RPC-3, RPC-3A, AND RPC-5) __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 8 RPC-3, R PC-3A AND R PC-5 QUICK START NOTE: The RPC-3, 3A a nd 5 are configured in a similar manne r.
RPC SERIES OWNER’S M ANUAL RPC SERIES QUICK S TART (RPC-3, RPC-3A, AND RPC-5) __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 9 RPC-3 Te l net Host Revis io n F 3.03, (C) 1998 Bay Technic al Asso ciates Unit ID: RPC3 RPC-3 Menu: 1) .
RPC SERIES OWNER’S M ANUAL RPC SERIES QUICK S TART (RPC-3, RPC-3A, AND RPC-5) __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 10 Change Password Default password is <cr>; disabled. Password is case sensitive.
RPC SERIES OWNER’S M ANUAL RPC SERIES QUICK S TART (RPC-3, RPC-3A, AND RPC-5) __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 11 Access Defaul t password is <cr>; disab led. NOTE : I f user nam e and password are disabled (d efault), outlet users will have access to all admin functions.
RPC SERIES OWNER’S M ANUAL INSTALLATION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 12 INSTALLATION UNPACKI NG Compare the unit and serial number of the equipment you received to the packing slip located on the outside of the box.
RPC SERIES OWNER’S M ANUAL INSTALLATION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 13 POWER CAUTION: This unit is intended for indoor use onl y . Do not install near wa ter or expose this unit to moisture.
RPC SERIES OWNER’S M ANUAL INSTALLATION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 14 POWER ON/OFF STATE Each recept acle is indi vidually controll ed by an intern al rela y .
RPC SERIES OWNER’S M ANUAL CABLING __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 15 CABLING RJ-45 CABLES AND ADAPTERS IMPORTANT: All RPC models have an RJ-45 port for connectin g to a local E IA-232 device such as a computer termin al or external modem.
RPC SERIES OWNER’S M ANUAL CABLING __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 16 The RPC R J-45 con tro l por t use s t he fol low ing sig nals : EIA- 232 R J- 45 PI N /S I GN A L DEFI N I TI ON Pin EIA- 232 Sign al Direction Descrip tion 1D T R O u t p u t +10V w hen activ ate d by D CD .
RPC SERIES OWNER’S M ANUAL CABLING __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 17 Modem Co mm unicat io ns: A modem ca n be co nnected to the EI A-232 serial port by using a 25MR J45MD-8 adapter (F ig ure 6).
RPC SERIES OWNER’S M ANUAL CABLING __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 18 IMPORTANT : Crossed R J-45 cables are required when mod ular c.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 19 DETAILED OPERATION AND CONFIGURATION The following section, “Operation and Confi guration,” provides a detailed approach to accessing, op erating, and confi guring the RPC.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 20 Using the 9FRJ45PC-1 adapter (or.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 21 Accessing Main Menu Power on the RPC unit. The following status menu appears: RPC-2 Ser ies (c) 1997 by BayTec h F2.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 22 RPC-2 Ser ies (c) 1997 by BayTec h F2.07 Circu it Bre ak er : On 1) . . . OUT LET 1 : O ff 2) .
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 23 set, the RPC requires password entr y before allowing the user to operate the RPC unit .
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 24 typing “CON FIG” to access th e configuration menu.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 25 Enter the number of the outlet y ou want to change. If y ou want to chan ge the name of Outlet 4, type the number 4 at the “Enter Request” prompt, followed b y <cr>.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 26 From the configuration menu, select #3, “Enable/Disable Confirmation.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 27 RPC-2 MD01 AND RPC-2 RDR LOCAL A.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 28 parameters are 9600 bps, 8 data bits, 1 stop bit, and no parity.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 29 OPERATION The RPC’s main menu allows y ou to monitor and control equipment attached to each of the R PC-2 RDR and RPC -2 MD01’s six receptacles.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 30 If the status menu fails to appear, ensure the correct cabl es and adapters a re being us ed and that they are connected prop erl y .
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 31 The REBOOT n command will reboot or reset equipment attached to co rresponding receptacl e(s).
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 32 RPC-2 Seri es (C) 1997 by BayTe ch F2.07 Circu it Bre ak er : On 1) . . . OUT LET 1 : O ff 2) .
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 33 Change Password From the status menu’s RPC > prompt, type CONFIG . The following menu appears: RPC > CONFIG 1) .
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 34 typing CONFIG” from the RPC > prompt to access the confi guration menu.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 35 Select #2, “Change Outlet Name,” and press <Enter.> The RPC responds: 1) .
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 36 RPC-3 AND RPC-3A and R PC-5 NOTE : The RPC-3, RPC-3A and RPC-5 are configured in a similar manner.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 37 LOCAL ACCESS Load serial port communications software. USING EIA-232 Configure host te rminal’s serial SERIAL CONNECTION communications pa rameters to matc h the RPC.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 38 established via a Telnet session from your workstation. Using a straight 10Base-T cable, conn ect the Ethernet portion the RPC Series to the network hub.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 39 In the RPC Series’s main menu,.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 40 If the ma in menu fails to appea r, ensure the correct cabl es and adapters a re being us ed and they are properl y connected.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 41 NOTE : The outlet user sees only those outlets as assigned to him by the admi n user.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 42 receptacl e(s).
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 43 Add Use r The “Add user” option is presented any time less than 8 (4 for the RPC-5) optional users are defined.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 44 Change Password IMPORTANT: If enabled, the password fun ction provides independent user access to assi gned outlets b y entering a user name and/or password.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 45 When y ou enter the current pass.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 46 Change Outlet List The outlet list dete rmines which outlets a particular user can a ccess.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 47 CONFIGURATION Configuration can be perfo rmed by the admin user only via the seri al port or the network port.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 48 address is 0.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 49 Enter the Gateway address (Example: 200.4.5.50), followed b y <cr>. The RPC resumes the c onfiguration menu Default Gateway address is 0.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 50 Login setup Togg l e option by ent eri ng nu mber, CR to ex i t. Netw ork acces s: 1).
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 51 Outlet Status Display From the Outlet Operation Configuration Menu, select #1, “Outlet Status Display.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 52 From the Outlet Configuration Menu, select #3, “Outlet Power-up Dela y .
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 53 Enter nu mber of outl et to name, CR to ex it. 1) . . . OUTLET 1 2) . . . OUTLET 2 3) .
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 54 Display Outlet User From the Outle t Operation Configuration Menu, select #5, “Display Outlet User, ” followed b y <cr>.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 55 RPC Unit Status Menu 1) . . . System 2) . . . Network In terface 3) . . . Logged Users 4) .
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 56 Netw ork Status: M e di um stat us: g ood Medium fau lts: 0 Xmit bufr errs: 0 Available send bu ffers: 2 9 Receive que ue status: open <Strik e any k ey to cont inue.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 57 Outlet St atus The following tab.
RPC SERIES OWNER’S M ANUAL DETAILED OPERATION AND CONFIGURAT ION __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 58 RPC3 > “n” refers to sel e ction n umber, as dis playe d i n Outlet Status .
RPC SERIES OWNER’S M ANUAL TECHNICAL SUPPORT ____________________________________________________________ 59 TECHNICAL SUPPORT BayTech has a staff o f applications engineers on dut y to assist y ou from 7 a.m. to 6 p.m. (CST or CDT), Monday through Friday.
RPC SERIES OWNER’S M ANUAL TECHNICAL SUPPORT ____________________________________________________________ 60 EQUIPMENT SETUP RPC Series Unit Model ____________ RPC Series Unit Serial Number __ _____.
RPC SERIES OWNER’S M ANUAL REPACKAGING, SHIPPING, AND RETURN ING TO THE FACT ORY __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 61 REPACKAGING, SHIPPING AND RETURNING TO THE FACTORY If your Ba y Tech unit needs service, up grade, or rep air, return it to BayTech.
RPC SERIES OWNER’S M ANUAL FCC RADIO FREQUENCY INTERFACE STATEM ENT __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 62 FCC RADIO FREQUENCY INTERFACE.
RPC SERIES OWNER’S M ANUAL FCC RADIO FREQUENCY INTERFACE STATEM ENT __ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ ____ ______ ____ ____ ____ ______ ____ 63 d. If the Telephone Compan y requests information on connected equipment to their lines, inform them of the following: 1.
RPC SERIES OWNER’S M ANUAL APPENDIX A _____ ____ ______ ____ ____ _____ ___ ____ ______ ____ ____ ____ ____ ______ ____ ____ ____ _____ 64 APPENDIX A SPECIFICATIONS RPC- 2 RPC- 2A RPC-2 MDO 1 RPC-2 .
RPC SERIES OWNER’S M ANUAL APPENDIX A _____ ____ ______ ____ ____ _____ ___ ____ ______ ____ ____ ____ ____ ______ ____ ____ ____ _____ 65 APPENDIX A SPECIFICATIONS (Cont.
RPC-SERIE S OWNER’S MANUAL APPENDIX B 66 APPENDIX B MODEM COMMAND SUMMARY U.S. ROBOTIC MODEMS COMMAND INTERPRETATION AT&B1 Fixed Serial Port Rate (default) AT&C1 Normal CD Operations (default) AT&D2 Normal DTR Operations (default) ATS0=1 Auto answer telephone line in 4 or fewer rings ATE0 Modem does not display ke yboard comm ands.
RPC-SERIE S OWNER’S MANUAL APPENDIX B 67 APPENDIX B MODEM COMMAND SUMMARY (Cont.) ROCKWELL CHIP SET MODEMS COMMAND INTERPRETATION ATS23=59 F ixed Serial Port Rate (def ault) AT&C1 Normal CD Oper.
RPC-SERIE S OWNER’S MANUAL APPENDIX C 68 APPENDIX C DIAGNOSTIC LED I NDICATIONS To detect hardware, cabling, or configuration problems upon initialization of power, the RPC Series go through a dia gnostic sequence. To help determine the cause of the problem, the RPC Series have a CX LED located on the front, right side of the unit.
RPC-SERIE S OWNER’S MANUAL APPENDIX D 69 APPENDIX D RPC TROUBLESHOOTING GUIDE PROBLEM SYMP TOM CAUSE SOLUTION No Menu Blank Screen Cables Adapters Parameters En sure correct cables and adapters are being used an d are connected properly . Verify serial param eters are correctly configured.
RPC-SERIE S OWNER’S MANUAL APPENDIX D 70 APPENDIX D - RPC TROUBLESHOOTING GUIDE (Cont’) PROBLEM SYMPTOM CAUSE SOLUTION Cannot access Outlet Contro l or Conf igur ation “X” i n the me nu l ine for the desi red operation Multiple Users Network user overrides s erial user.
RPC-SERIE S OWNER’S MANUAL APPENDIX D 71 APPENDIX D - RPC TROUBLESHOOTING GUIDE (Cont’) PROBLEM SYMP TOM CAUSE SOLUTION PI N G not ec ho ing request Gets request timeout Check ne t work connection.
RPC-SERIE S OWNER’S MANUAL APPENDIX E 72 APPENDIX E- DRAWINGS RPC-2.
RPC-SERIE S OWNER’S MANUAL APPENDIX E 73 APPENDIX E- DRAWINGS RPC-2A.
RPC-SERIE S OWNER’S MANUAL APPENDIX E 74 APPENDIX E- DRAWINGS RPC-2 MD01.
RPC-SERIE S OWNER’S MANUAL APPENDIX E 75 APPENDIX E- DRAWINGS RPC-2 RDR.
RPC-SERIE S OWNER’S MANUAL APPENDIX E 76 APPENDIX E- DRAWINGS RPC-3.
RPC-SERIE S OWNER’S MANUAL APPENDIX E 77 APPENDIX E- DRAWINGS RPC-3A.
RPC-SERIE S OWNER’S MANUAL APPENDIX E 78 APPENDIX E- DRAWINGS RPC3/3A/5 ETHERNET B OARD.
RPC-SERIE S OWNER’S MANUAL APPENDIX E 79 APPENDIX E- DRAWINGS RPC-5.
RPC-SERIE S OWNER’S MAP INDEX 80 INDEX A Ada pter, 2, 5, 6, 8 , 12, 16, 19, 20, 27, 28, 37 Ada p t er s, 59 Applic ations Eng ineer, iii Asynchronou s, 1 7 AT DT Comm ands, 31 C Cable, 1 8 Cable s, .
RPC-SERIE S OWNER’S MAP INDEX 81 R Reboot , 14, 20 , 22, 29, 31, 41 Remote Acce ss, 5, 28, 3 7 Remote Operations , 38 Repacka ging, 6 1 Reset, 22, 31, 41, 55, 57, 70 Returning, 61 Ring Detect Reset,.
Een belangrijk punt na aankoop van elk apparaat Bay Technical Associates RPC-2 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Bay Technical Associates RPC-2 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Bay Technical Associates RPC-2 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Bay Technical Associates RPC-2 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Bay Technical Associates RPC-2 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Bay Technical Associates RPC-2 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Bay Technical Associates RPC-2 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Bay Technical Associates RPC-2 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
