Gebruiksaanwijzing /service van het product FLX15 van de fabrikant Tiger
Ga naar pagina of 100
Published 04-06 S/N A10100003306- A10100152509 inclusive Part No. A101-01-0C S/N A10200002306- A10200051405 inclusive OPERA T OR'S MANUAL This Operator's Manual is an integral p art of the safe operation of this machine and must be maint ained with the unit at all times.
TO THE OWNER/OPERA T OR/DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices.
DEALER’S PREDELIVER Y SER VICE GUIDE for the SCHUL TE FLX15/ FLX10 DET AILS OF ITEMS LISTED BELOW ARE COVERED IN THIS OPERA TOR’S MANUAL ____ Shipping damage corrected ____ Set up machine as outlined in the shipping instructions attached to these instructions.
T ABLE OF CONTENTS SAFETY SECTION Safety Decals .................................................................................................................................. 1-2 Safety Decal Location ..............................................
SAFETY SECTION Safety Section 1-1.
Safety Section 1-2 FLX15/10 04/06 SAFETY © 2006 Alamo Group Inc. SAFETY A safe and careful operator is the best operator . Safety is of primary import ance to the manufacturer and should be to the owner/operator . Most accidents can be avoided by being aware of your equipment, your surroundings, and observing certain precautions.
Safety Section 1-3 SAFETY © 2006 Alamo Group Inc. SAFETY FLX15/10 04/06 Si no lee Ingles, pida ayuda a alguien que si lo lea para que le traduzca las medidas de seguridad.
Safety Section 1-4 FLX15/10 04/06 SAFETY © 2006 Alamo Group Inc. SAFETY DANGER! Never allow children to operate or ride on the Tractor or Implement. (SG-11) WARNING! Do not mount the Tractor while the tractor is moving. Mount the Tractor only when the Tractor and all moving parts are completely stopped.
Safety Section 1-5 SAFETY © 2006 Alamo Group Inc. SAFETY FLX15/10 04/06 WARNING! Transport only at safe speeds. Serious accidents and injuries can result from operating this equipment at unsafe speeds. Understand the Tractor and Implement and how it handles before transporting on streets and highways.
Safety Section 1-6 FLX15/10 04/06 SAFETY © 2006 Alamo Group Inc. SAFETY WARNING! Periodically inspect all moving parts for wear and replace when neces- sary with authorized service parts. Look for loose fasteners, worn or broken parts, and leaky or loose fittings.
Safety Section 1-7 SAFETY © 2006 Alamo Group Inc. SAFETY FLX15/10 04/06 WARNING! Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the state of California to cause cancer and birth defects or other reproductive harm.
Safety Section 1-8 FLX15/10 04/06 SAFETY © 2006 Alamo Group Inc. SAFETY WARNING! Mow only in conditions where you have clear visibility in daylight or with adequate artificial lighting. Never mow in darkness or foggy conditions where you cannot clearly see at least 100 yards in front and to the sides of the tractor and mower.
Safety Section 1-9 SAFETY © 2006 Alamo Group Inc. SAFETY FLX15/10 04/06 DANGER! Replace bent or broken blade with new blades. NEVER ATTEMPT TO STRAIGHTEN OR WELD ON BLADES SINCE THIS WILL LIKELY CRACK OR OTHERWISE DAMAGE THE BLADE WITH SUBSEQUENT FAILURE AND POSSIBLE SERIOUS INJURY FROM THROWN BLADES.
Safety Section 1-10 FLX15/10 04/06 SAFETY © 2006 Alamo Group Inc. SAFETY DANGER! Always disconnect the main PTO Driveline from the Tractor before performing service on the Mower. Never work on the Mower with the tractor PTO driveline connected and running.
Safety Section 1-11 SAFETY © 2006 Alamo Group Inc. SAFETY FLX15/10 04/06 DANGER! DO NOT allow any person under a folded wing unless wing is securely locked up or supported. DO NOT approach the Implement unless the Tractor is turned off and all motion has ceased.
Safety Section 1-12 FLX15/10 04/06 SAFETY © 2006 Alamo Group Inc. SAFETY DANGER! This Implement is wider than the Tractor. Be careful when operating or transporting this equipment to prevent the Implement from running into or striking sign posts, guard rails, concrete abutments or other solid objects.
Safety Section 1-13 SAFETY © 2006 Alamo Group Inc. SAFETY FLX15/10 04/06 I n addition to the design and configuration of this Implement, including Safety Signs and Safety Equipment, hazard control an.
Safety Section 1-14 FLX15/10 04/06 SAFETY © 2006 Alamo Group Inc. SAFETY 50 38 36 37 Canister Manual Inside 39 40.
Safety Section 1-15 SAFETY © 2006 Alamo Group Inc. SAFETY FLX15/10 04/06 ITEM PART NO. QTY. DESCRIPTION 1 2 226-004 1 Fema Member 3 226-044 1 Decal, Grease Nipple On Underside 4 226-048 1 Decal, Warn.
Safety Section 1-16 FLX15/10 04/06 SAFETY © 2006 Alamo Group Inc. SAFETY Item 2: FEMA MEMBER DECAL Item 3: Grease Nipple on Underside. Apply grease as specified in Owner's Manual. P/N 226-044 Item 4:DO NOT transport at speeds higher than 20 mph.
Safety Section 1-17 SAFETY © 2006 Alamo Group Inc. SAFETY FLX15/10 04/06 Item 6:Grease Every 8hrs. Item 7: Made In North America Item 8:IMPORTANT! Minimum Lubrication Requirements Item 10: LOGO NAME SCHULTE Medium.
Safety Section 1-18 FLX15/10 04/06 SAFETY © 2006 Alamo Group Inc. SAFETY Item 11:LOGO NAME Tiger Mowers Large Item 12: WARNING; High-Pressure Fluid Hazard P/N 31523 Item 13: Red Reflector2"x9". Keep reflec- tors clean and visible. Item 14: Amber Reflector2"x9".
Safety Section 1-19 SAFETY © 2006 Alamo Group Inc. SAFETY FLX15/10 04/06 Item 15:Amber Reflector 2"x4-1/2". Keep reflectors clean and visible. Item 16: Patent Numbers P/N 226-1541 P/N 226-353 Item 17: Grease Every 4 hrs. P/N 226-180 Item 18: Grease Every 8hrs.
Safety Section 1-20 FLX15/10 04/06 SAFETY © 2006 Alamo Group Inc. SAFETY Item 19: Grease Every 50hrs. Item 20:Fluorescent Reflector 2" X 9". Keep reflectors clean and visible. P/N 226-189 P/N 226-182 Item 21: Peligro Translation, If you do not know how to read english.
Safety Section 1-21 SAFETY © 2006 Alamo Group Inc. SAFETY FLX15/10 04/06 Item 23: Multi-Hazard Decal Item 24:Make certain that drivelines are correct lenth and are securely attached. Item 25: Operator's Manual (with repair parts) and warranty was attached to this implement during final inspection.
Safety Section 1-22 FLX15/10 04/06 SAFETY © 2006 Alamo Group Inc. SAFETY Item 27: DECAL NAME FLX15 Item 28:Reduce transport speed when taveling along side of road edge to maintain proper control of Flex Arm Mower Item 29: DANGER! If guard missing or damaged DO NOT Operate.
Safety Section 1-23 SAFETY © 2006 Alamo Group Inc. SAFETY FLX15/10 04/06 Item 31: WARNING: To reduce serious bodily injury from thrown objects the direction of blades should be as shown on decal. Item 32: Color Coded Hose Ends Item33: IMPORTANT! For optimal Performance, use a maximum forward speed of 4 mph (6.
Safety Section 1-24 FLX15/10 04/06 SAFETY © 2006 Alamo Group Inc. SAFETY Item35 : IMPORTANT! Apply grease to cross shaft in the collapsed and extended position every 4 hours.
Safety Section 1-25 SAFETY © 2006 Alamo Group Inc. SAFETY FLX15/10 04/06 This section is intended to explain in broad terms the concept and effect of federal laws and regulations concerning employer and employee equipment operators. This section is not intended as a legal interpretation of the law and should not be considered as such.
.
Introduction Section 2-1 INTRODUCTION SECTION.
Introduction Section 2-2 FLX15/10 04/06 © 2006 Alamo Group Inc. INTRODUCTION INTRODUCTION Your Flex Arm is designed to attach a 10' or 15' cutter it is primarily for weeds, grass, and brush up to 2" in diameter. The Flex Arm allows the operator to travel on the road while the 10' or 15' cutter cuts the ditch slope.
Introduction Section 2-3 FLX15/10 04/06 © 2006 Alamo Group Inc. INTRODUCTION INTRODUCTION ATTENTION OWNER/OPERATOR BEFORE OPERATING THIS MACHINE: 1. Carefully read the Operator’s Manual, completely understand the Safety Messages and instructions, and know how to operate correctly both the tractor and Mower.
.
ASSEMBL Y SECTION Assembly Section 3-1.
Assembly Section 3-2 FLX15/10 04/06 © 2006 Alamo Group Inc. ASSEMBL Y ASSEMBL Y 1. From Shipping Position (FLX15/10) Use the following procedure to get your implement field ready. Block the flex arm under the frame at point "A". Remove the four shipping brackets, "B"and discard.
Introduction Section 3-3 © 2006 Alamo Group Inc. ASSEMBL Y ASSEMBL Y FLX15/10 04/06 2. Adjustment s Phasing the Yokes To reduce noise and prevent accelerated wear, the flex arm gearbox yokes are set in phase. If replacement is required, ensure the yokes remain in phase.
Assembly Section 3-4 FLX15/10 04/06 © 2006 Alamo Group Inc. ASSEMBL Y ASSEMBL Y Attach safety tow chain to flex arm and tractor. Fasten the large loop of the safety chain to the hitch, using the 1” bolt, washer, and nut. Attach the other end of the chain to tractor.
Introduction Section 3-5 © 2006 Alamo Group Inc. ASSEMBL Y ASSEMBL Y FLX15/10 04/06 6. Connection to Cutter Remove the hitch clevis from the hitch swivel on the cutter if equipped. Insert the 3/4" bolts into the castor wheels to lock in place. 3/4" Bolt To align the precision hitch, board the tractor and start the engine.
Assembly Section 3-6 FLX15/10 04/06 © 2006 Alamo Group Inc. ASSEMBL Y ASSEMBL Y Remove the cutter jack and place in its storage position. Pin the strut assembly to the mounting lugs on the arm and cutter with the 1" bolts. The length of the strut from pinpoint to pinpoint should be set to according to what type of cutter is being attached.
Introduction Section 3-7 © 2006 Alamo Group Inc. ASSEMBL Y ASSEMBL Y FLX15/10 04/06 • On the rotary cutter wing lift cylinders, remove the breather plug from the clevis end and replace it with the supplied hose assembly. Install the hose with the double-wrapped blue ties on the right wing, and the double wrap orange ties on the left wing.
Assembly Section 3-8 FLX15/10 04/06 © 2006 Alamo Group Inc. ASSEMBL Y ASSEMBL Y 9. Connecting the Hoses to Breakaway S t and and Connecting the Selector V alve for 10’ Models The selector valve kit reduces the required tractor ports and provides double acting wing lift action.
Introduction Section 3-9 © 2006 Alamo Group Inc. ASSEMBL Y ASSEMBL Y FLX15/10 04/06 To Tractor (Yellow/Blue) Phasing Hoses (Yellow) Wing Hoses (Blue) • On the rotary cutter wing lift cylinder, remove the breather plug from the clevis end and replace it with the supplied hose assembly.
Assembly Section 3-10 FLX15/10 04/06 © 2006 Alamo Group Inc. ASSEMBL Y ASSEMBL Y IMPORTANT: Check oil level in all gearboxes before operation. Refer to the ‘Lubrication’ section of this manual for recommended oil type and viscosity. Lubricate all grease fittings.
OPERA TION SECTION © 2004 Alamo Group Inc. Operation Section 4-1.
OPERATION Operation Section 4-2 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 IMPORT ANT : T o avoid mower damage, retorque all bolts af ter the first 10 hours of operation. FLEX ARM & MOWER ST ANDARD EQUIPMENT AND SPECIFICA TIONS........... .
OPERATION OPERATION Operation Section 4-3 © 2006 Alamo Group Inc. FLX15/10 04/06 READ AND UNDERSTAND THE ENTIRE OPERATING INSTRUCTIONS AND SAFETY SECTION OF THIS MANUAL AND THE TRACTOR MANUAL BEFORE ATTEMPTING TO USE THE TRACTOR AND MOWER.
OPERATION Operation Section 4-4 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 Mower S t andard Equipment And S pecifications Flex-Arm Equipment And S pecifications FLX15 FLX10 T ransport Width 131”(3.327 m) 1 13”(2.870 m) T ransport Wid th with Cutter 135”(3.
OPERATION OPERATION Operation Section 4-5 © 2006 Alamo Group Inc. FLX15/10 04/06 Cutting Width 180” (4.57) 126”(3.20 m) Overall Width 190”(4.82 m) 136”(3.45 m) Overall Length 196”(4.97 m) 196”(4.97 m) T ransport wid th below wing tires 96”(2.
OPERATION Operation Section 4-6 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 1. OPERA T OR REQUIREMENTS Safe operation of the rotary mower is the responsibility of a qualified operator.
OPERATION OPERATION Operation Section 4-7 © 2006 Alamo Group Inc. FLX15/10 04/06 2.2 Tractor Safety Devices 2.1 ROPS and Seat Belt A Roll-Over-Protective-Structure (ROPS) and seat belt are essential to protect the operator from falling off the tractor, especially during a roll over where the driver could be crushed and killed.
OPERATION Operation Section 4-8 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 The horsepower required to operate the mower depends on several operating factors including the vegetation to be cut, terrain condition, operator experience, condition of the mower and tractor , and other factors.
OPERATION OPERATION Operation Section 4-9 © 2006 Alamo Group Inc. FLX15/10 04/06 Never operate the T ractor and Mower if the Mower main driveline is directly connected to the Tractor transmission.
OPERATION Operation Section 4-10 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 3. GETTING ON AND OFF THE TRACTOR Use both hands and equipped handrails and steps for support when getting on the tractor. Never use tractor control levers for support when mounting the tractor.
OPERATION OPERATION Operation Section 4-11 © 2006 Alamo Group Inc. FLX15/10 04/06 5. CONNECTING THE FLEX-ARM TO THE TRACTOR Use extreme caution when connecting the FLEX-ARM to the tractor . The FLEX ARM should be securely resting at ground level with the parking jack foot.
OPERATION Operation Section 4-12 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 1. Ensure the tractor is equipped with the correct PTO shaft and the drawbar is set at the correct length. 2. Using the parking jack, position the tongue clevis to the height of the tractor drawbar .
OPERATION OPERATION Operation Section 4-13 © 2006 Alamo Group Inc. FLX15/10 04/06 5.2 Connecting the Cutter Precision Hitch to the FLEX-ARM 1. Ensure the FLEX-ARM is equipped with the correct gearbox output shaft. 2. Using the parking jack, position the cutter tongue clevis to the height of the FLEX-ARM precision hitch.
OPERATION Operation Section 4-14 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 NOTE: All cutters will have a strut mount lug welded to the cutter at the factory . If cutter is and older model and does not come with the welded mounted lug, a retro-fit weld on lug kit is available for purchase at your local dealer .
OPERATION OPERATION Operation Section 4-15 © 2006 Alamo Group Inc. FLX15/10 04/06 The cut height for the center section is set by extending or shortening the depth collar located on the center lift cylinder . Cutting height for the wing cylinders will be automatically controlled by the hydraulic phasing system.
OPERATION Operation Section 4-16 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 7. DRIVELINE ATTACHMENT The driveline yoke and tractor PTO shaft must be dirt free and greased for attachment. 1. S tart by using the driveline that was shipped with the cutter being used.
OPERATION OPERATION Operation Section 4-17 © 2006 Alamo Group Inc. FLX15/10 04/06 WARNING! When att aching the PTO yoke to the T ractor PTO shaf t, it is important that the spring activated locking collar slides freely and the locking balls are seated securely in the groove of the PTO shaft.
OPERATION Operation Section 4-18 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 8. PRE-OPERATION INSPECTION AND SERVICE Before each use, a pre-operation inspection and service of the mower and tractor must be performed.
OPERATION OPERATION Operation Section 4-19 © 2006 Alamo Group Inc. FLX15/10 04/06 DANGER! All Safety Shields, Guards and Safety devices including (but not limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox Shields, PTO integral shields, and the Retractable Door Shields should be used and maintained in good working condition.
OPERATION Operation Section 4-20 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 Ensure the tractor PTO master shield is in place, lowered and in good condition. Ensure each mower slip clutch shield is secured in place and in good condition.
OPERATION OPERATION Operation Section 4-21 © 2006 Alamo Group Inc. FLX15/10 04/06 Ensure each hydraulic cylinder is installed and retained correctly. Ensure the proper size pins are used to retain the cylinders in place and are secured with pins.
OPERATION Operation Section 4-22 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 DANGER! 8.3 CUTTING COMPONENT INSPECTION Inspect blade pan and blade assembly for the following: Damaged Pan Cause: Blade Pan contacts an immovable object while mower was in motion.
OPERATION OPERATION Operation Section 4-23 © 2006 Alamo Group Inc. FLX15/10 04/06 9. DRIVING THE TRACTOR AND MOWER Safe tractor transport requires the operator possess a thorough knowledge of the model being operated and precautions to take while driving with an attached implement.
OPERATION Operation Section 4-24 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 9.1 Starting the Tractor The procedure to start the tractor is model specific. Refer to the tractor operator’s manual for starting procedures for your particular tractor.
OPERATION OPERATION Operation Section 4-25 © 2006 Alamo Group Inc. FLX15/10 04/06 Operating Position T o lower the wings, remove the transport lock pins and secure pins at storage location. DO NOT drive out transport pins that have tension on them. After removing pins, extend wing hydraulic cylinders and fully lower wings.
OPERATION Operation Section 4-26 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 S tart off driving at a slow speed and gradually increase your speed while maint aining complete control of the tractor , flex arm, and mower . Moving slowly at first will also prevent the tractor from rearing up and loss of steering control.
OPERATION OPERATION Operation Section 4-27 © 2006 Alamo Group Inc. FLX15/10 04/06 9.5 Crossing Ditches and Steep Inclines When crossing ditches with steep banks or going up sharp inclines, it is poss.
OPERATION Operation Section 4-28 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 10. OPERA TING THE TRACT OR,FLEX ARM, AND MOWER THE OPERA TOR MUST COMPLETEL Y UNDERST AND HOW TO OPERA TE THE TRACTOR, FLEX ARM, AN D MOWER AND ALL CONTROLS BEFORE A TTEMPTING TO MOW .
OPERATION OPERATION Operation Section 4-29 © 2006 Alamo Group Inc. FLX15/10 04/06 10.2 Bystander/Passersby Precautions If a bystander comes within 100 yards of the tractor while the mower is being operated, stop the tractor at once, idle the engine and disengage the PTO.
OPERATION Operation Section 4-30 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 WARNING! Mow at the speed that you can safely operate and control the Tractor and Mower. Safe mowing speed depends on terrain condition and grass type, density, and height of cut.
OPERATION OPERATION Operation Section 4-31 © 2006 Alamo Group Inc. FLX15/10 04/06 10.5 Operating the Flex Arm & Mower The mower is designed to cut vegetation up to 2” in diameter . Sharp blades will produce a cleaner cut and require less power .
OPERATION Operation Section 4-32 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 Never raise the mower entirely while the blades are turning. If the mower must be raised higher than 12” from ground level, disengage the tractor PTO and wait for all mower rotation to come to a complete stop before proceeding to raise the mower.
OPERATION OPERATION Operation Section 4-33 © 2006 Alamo Group Inc. FLX15/10 04/06 S tay alert and watch for trees, powerlines, post s, signs, and all other overhead and ground obstructions while you are mowing. Use extreme care to avoid hitting these types of obstructions.
OPERATION Operation Section 4-34 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 1 1. DISCONNECTING FLEX-ARM & MOWER FROM THE TRACT OR Always shut the T ractor completely down, place the transmission in park, and set the p arking brake before you or anyone else attempts to connect or disconnect the Implement and Tractor hitches.
OPERATION OPERATION Operation Section 4-35 © 2006 Alamo Group Inc. FLX15/10 04/06 1. When disconnecting Flex arm, and mower , the tractor should be completely shut down and secured in position. Relieve hydraulic pressure by moving the control levers back and forth several times.
OPERATION Operation Section 4-36 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 13. TRANSPORTING THE TRACT OR, FLEX-ARM, AND MOWER Inherent dangers of operating the tractor ,flex arm, and mower and the possibility of accidents are not left behind when you finish mowing an area.
OPERATION OPERATION Operation Section 4-37 © 2006 Alamo Group Inc. FLX15/10 04/06 Before transporting the tractor on a public roadway or boarding a trailer for transport, the tractor brake pedals should be locked together. Locking the pedals ensures that both wheels brake simultaneously while stopping, especially when making an emergency stop.
OPERATION Operation Section 4-38 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 13.1 Transporting on Public Roadways Extreme caution should be used when transporting the tractor and mower on public roadways.
OPERATION OPERATION Operation Section 4-39 © 2006 Alamo Group Inc. FLX15/10 04/06 Make sure that all tractor flashing warning lights, headlights, and brake/taillights are functioning properly before proceeding onto public roads.
OPERATION Operation Section 4-40 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 Reduce speed before turning or applying the brakes. Ensure that both brake pedals are locked together when operating on public roads. DANGER! When the Wings are folded for transport, the center of gravity is raised and the possibility of overturn is increased.
OPERATION OPERATION Operation Section 4-41 © 2006 Alamo Group Inc. FLX15/10 04/06 13.2 Hauling the T ractor , Flex Arm and Mower The Flex Arm and the mower must be disconnected and separated before loading onto a trailer . Follow the instructions and safety precautions listed in this manual to disconnect and separated the mower from the Flex Arm.
OPERATION Operation Section 4-42 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 Before transporting a loaded tractor , flex arm, and mower , measure the height and width dimensions and gross weight of the complete loaded unit. Ensure that the load will be in compliance with the legal limits set for the areas that will be traveled through.
OPERATION OPERATION Operation Section 4-43 © 2006 Alamo Group Inc. FLX15/10 04/06 14. TROUBLE SHOOTING GUIDE (CUTTER).
OPERATION Operation Section 4-44 OPERATION © 2006 Alamo Group Inc. FLX15/10 04/06 TROUBLE SHOOTING GUIDE (FLX15/10) Symptom Problem Correction Excessive driveline vibration Gearbox yokes out of phase.
© 2004 Alamo Group Inc. MAINTENANCE SECTION.
MAINTENANCE Maintenance Section 5-2 © 2006 Alamo Group Inc. MAINTENANCE FLX15/10 04/06 1. Maintenance Nuts and Bolts 1. Check all nuts and bolts for tightness after the first 8 hours of operation, then weekly. Check the condition of cotter pins, roll pins and other fasteners weekly and replace if necessary.
MAINTENANCE Maintenance Section 5-3 © 2006 Alamo Group Inc. MAINTENANCE FLX15/10 04/06 WARNING! Always read carefully and comply fully with the manufacturers instructions when handling oil, solvents, cleansers, and any other chemical agent. (SG-22) 2.
MAINTENANCE Maintenance Section 5-4 © 2006 Alamo Group Inc. MAINTENANCE FLX15/10 04/06 DANGER! Do not operate this Equipment with hydraulic oil leaking. Oil is expensive and its presence could present a hazard. Do not check for leaks with your hand! Use a piece of heavy paper or cardboard.
MAINTENANCE Maintenance Section 5-5 © 2006 Alamo Group Inc. MAINTENANCE FLX15/10 04/06 2.3 Lubrication Gearboxes 1. Gearboxes Replace oil in gearboxes after the first 50 hours of operation then yearly.
MAINTENANCE Maintenance Section 5-6 © 2006 Alamo Group Inc. MAINTENANCE FLX15/10 04/06 2.5 Frame NLGI #2 EP molybdenum disulfide fortified grease is preferred for all sliding contact type applications such as frame pins.
MAINTENANCE Maintenance Section 5-7 © 2006 Alamo Group Inc. MAINTENANCE FLX15/10 04/06 Specifications FLX15 Hydraulic Circuit Requirements Hoses and breakaways are provided in order to connect to a 15’ rotary cutter with individual single acting wing circuits.
MAINTENANCE Maintenance Section 5-8 © 2006 Alamo Group Inc. MAINTENANCE FLX15/10 04/06 RAMLOK DISASSEMBLY PROCEDURE 1. Replacement cylinder head and butt seals must be available before beginning disassembly as they will be damaged during the procedure.
MAINTENANCE Maintenance Section 5-9 © 2006 Alamo Group Inc. MAINTENANCE FLX15/10 04/06 10. If the seal at the butt end of the cylinder needs to be replaced, disassembly is the same as for the cylinder head (see steps #3, 4 and 5). Again, note the rotation used to remove the wire and use the opposite rotation for assembly.
TIGER W ARRANTY INFORMA TION Tiger Corporation, 3301 N. Louise, Sioux Falls, South Dakota, war- rants to the original Retail Customer, the new Tiger equipment is free of defects in material and workmanship.
ONE LAST WORD This manual cannot possibly cover all of the potentially hazardous situations you will encounter. By being familiar, though, with the safety rules, operating and maintenance instructions in this manual you can help prevent accidents. The objective of this manual is to help make you a better operator.
FLX15/10 04/06 Printed In Canada P/N A101-010C.
Een belangrijk punt na aankoop van elk apparaat Tiger FLX15 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Tiger FLX15 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Tiger FLX15 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Tiger FLX15 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Tiger FLX15 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Tiger FLX15 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Tiger FLX15 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Tiger FLX15 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
