Gebruiksaanwijzing /service van het product 17RTC van de fabrikant Toa
Ga naar pagina of 32
17/19-INCH PREMIUM TFT-LCD MONITOR INSTRUCTION MANUAL 17RTC / 19RTC INSTRUCTION MANUAL Please read this manual thoro ugh ly before us e, and keep it han dy for future reference.
SAFETY INSTRUCTION……………………………… ………… ………………………….2 - 3 CAUTIONS ……………………………… ………..……………… …… ……………… ………..4 FCC RF INTERFERENCE STATEMENT ………… ………………………………………….
1. Read all of these instructions. 2. Save these instructions for later use. 3. Follow all warnings and instruction s marked on the product. 4. Unplug this product from the wall outlet before clean ing. Do not use liquid cleaners or ae rosol cleaners.
Refer all servicing to service personnel. 14. Unplug this product from the wall ou tlet and refer servicing to q ualified service person nel under the following conditions. A. When the power cord or plug is damaged or frayed. B. If liquid has been spilled into the product.
▶ NEVER REMOVE THE BACK COVER Removal of the back cover should be carri ed out only by qualified personnel. ▶ DO NOT USE IN HOSTILE ENVIRONMENTS To prevent shock or fire hazard, do not expose the unit to rain or moisture. This unit is designed to be used in the office or home.
NOTE This equipment has been tested a nd fou nd to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. T hese limits are designed to provide rea sonable protection against harmful interference i n a residential installation.
A. BOTTOM PANEL CONTROL 1. DC 12V IN 2. COMPONENT Y,Pb,Pr & SOUND L,R IN 3. AUDIO OUT 4. PC STEREO IN 5. D-SUB IN 6. DVI IN 7. HDMI IN (OPTION) B. SIDE PANEL CONTROL 1. VIDEO 1(AV1) IN 2. VIDEO 1(AV1) OUT 3. VIDEO 2(AV2) IN 4. VIDEO 2(AV2) OUT 5. S-VIDEO (Y/C) IN 6.
C. REMOTE CONTROLLER 1. POWER( ) Turns the power ON or O FF. There will be a few seconds delay before the d isplay ap pears. 2. SOURCE Select pc or video( AV1 / AV2 / S-Video / PC ) sources. 9. AUTO Auto geometry adjustment in PC Source. 10. MUTE Mute the sound.
D. FRONT KEY CONTROL 1. POWER ON/OFF( ) Turns the power ON or O FF. There will be a few seconds delay before the di splay ap pears. 2. MENU / EXIT Activates and exits the On Screen Display. 3. SOURCE/SELECT Select PC or video source. Select On Screen Display menu 4 / 5.
OSD MENU DESCRIPTION A: CUSTOM MENU (Only Video mode) Press the MENU button and then up( ▲ ) / down( ▼ ) button to select the Custom menu. Press the up( ▲ ) / down( ▼ ) button to sel ect Cu stom sub menu. Press the left(◀) / right( ▶ ) button to adjust picture setting.
A: CUSTOM MENU (Only PC mode) Press the MENU button and then up( ▲ ) / down( ▼ ) button to select the Custom menu. Press the up( ▲ ) / down( ▼ ) button to sel ect Cu stom sub menu. Press (◀) / right( ▶ ) button to adjust pict ure setting. Press the MENU button to save.
B. Picture / Sound Menu(Only Video mode) Press the MENU button and then up( ▲ ) / down( ▼ ) button to select the Picture / Sound. Press the right( ▶ ) or ENTER button. 1. Picture Mode Press the up( ▲ ) / down( ▼ ) button to sel ect the Picture Mode.
2. Color Tone Press the up( ▲ ) / down( ▼ ) button to sel ect the Col or Tone. Press the ( ▶) or ENTER button and then up( ▲ )/down( ▼ ) button to select the d esired color tone.
3. Mute Press the up( ▲ ) / down( ▼ ) button to select the Mute. Press the ( ▶) or ENTER button and then up( ▲ )/down( ▼ ) button t o select the desired Mute.
4. Volume Press the up( ▲ ) / down( ▼ ) button to select the Volume. Press (◀) / right( ▶ ) button to adjust Volume. Press the MENU button to save.
Press the ( ▶) or ENTER button and then up( ▲ )/down( ▼ ) button t o select the desired Size. Press the MENU button to save. 6. PC (Only PC mode) Press the up( ▲ ) / down( ▼ ) button to sel .
Press the up( ▲ ) / down( ▼ ) button to sel ect PC sub m enu Press the right( ▶ ) or ENTER button and then left (◀ ) / right( ▶ ) button to adjust PC setting. Press the MENU button to save. Auto Adjust: Auto geometry adjustment Phase: Adjust the number of horizontal picture elem e nts.
1. PIP Press the up( ▲ ) / down( ▼ ) button to sel ect the PIP. Press the right( ▶ ) or ENTER button and then pre s s up( ▲ ) / down( ▼ ) button to select the On or Off. Press the MENU button to save. 2. Input Source Press the up( ▲ ) / down( ▼ ) button to sel ect the Input Source.
Press the right( ▶ ) or ENTER button and then pre s s up( ▲ ) / down( ▼ ) button to select the de sire Input Source. Press the MENU button to save.
Press the right( ▶ ) or ENTER button and then pre s s up( ▲ ) / down( ▼ ) button to select the de sire Size. Press the MENU button to save. 4. Position Press the up( ▲ ) / down( ▼ ) button to sel ect the Positi on.
Press the right( ▶ ) or ENTER button and then pre s s up( ▲ ) / down( ▼ ) button to select the de sire Position. Press the MENU button to save. 5.
5. Sound Select Press the up( ▲ ) / down( ▼ ) button to sel ect the Soun d Select. Press the right( ▶ ) or ENTER button and then pre s s up( ▲ ) / down( ▼ ) button to select the de sire Sound Select.
D. SETUP MENU Press the MENU button and then up( ▲ ) / down( ▼ ) button to select the Setup menu. Press the right( ▶ ) or ENTER button . 1.Reset Press ENTER button to select the reset Reset : Select to reset all setting to the factory default values.
2. Language Press the up( ▲ ) / down( ▼ ) button to sel ect the Lan guage menu. Press the right( ▶ ) or ENTER button. Press the up( ▲ ) / down( ▼ ) button to sel ect lang uage.
3. OSD Tone Press the up( ▲ ) / down( ▼ ) button to sel ect the OSD t one menu. Press the right( ▶ ) or ENTER button Press the up( ▲ ) / down( ▼ ) button to sel ect the de sire OSD Tone.
4. Blue Screen Press the up( ▲ ) / down( ▼ ) button to sel ect the blue screen. Press the right( ▶ ) or ENTER button. Press the up( ▲ ) / down( ▼ ) button to select on or off.
5. Key Lock Press the up( ▲ ) / down( ▼ ) button to sel ect the key lo ck menu. Press the right( ▶ ) or ENTER button Press the up( ▲ ) / down( ▼ ) button to select on or off Press the MENU button to save.
Wall mount installation : 1) Remove the monitor stand bracket assembled with the monitor. 2) Us e the VESA standard mount ing design and the 100mm hole pattern on the back pan el to install the L CD monitor to the (Optional) mounting bracket sold separately .
▶ PIN ASSIGNMENTS ▶ ACCESSORY 1. POWER CORD 2. USER’S MANUAL 3. PC cable 4. Adaptor 5. Remote Control 6. Batteries 7. Wall mount (Option) 8. Rack mount (Option) INSTRUCTION MANUAL ………….
This monitor features a power m anagement sy stem to “power do wn” u pon receipt of the VESA DPMS(The display power management si gnaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs th is signaling system through not sending horizontal, vertical, or sync signal.
17“ 19“ 17 ˝ Diagonal AM-TFT(Active-Ma trix) 19 ˝ Diagonal A M-TFT(Active-Matrix) Pixel pitch(mm) : 0.264(H) 0.264(V) Pixel pitch(mm) : 0.294(H) 0.
WEEE Symbols 31 ………………………………………………… ………………………… INSTRUCTION MANUAL “ Going to Sleep” message on screen Correct Disposal of This Product (Wa.
Een belangrijk punt na aankoop van elk apparaat Toa 17RTC (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Toa 17RTC heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Toa 17RTC vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Toa 17RTC leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Toa 17RTC krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Toa 17RTC bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Toa 17RTC kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Toa 17RTC . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
