Gebruiksaanwijzing /service van het product SR-S4S van de fabrikant TOA Electronics
Ga naar pagina of 16
OPERA TING INSTRUCTIONS LINE ARRA Y SPEAKERS EXTENSION PLA TE (optional) PROTECTION P AD (optional) SR-S4L SR-S4S SR-EP4 SR-PP4 SR-S4L SR-S4S Thank you for purchasing TOA's Line Array Speakers and their associated products. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
2 T ABLE OF CONTENTS 1. SAFETY PRECAUTIONS ............................................................................................ 3 2. GENERAL DESCRIPTION ..........................................................................................
3 1. SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation. • Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or cautions regarding safety.
4 When Installing the Unit • Avoid placing the unit in a doorway or other high traffic area as people may trip on the equipment and cords, or be injured by falling objects.
5 2. GENERAL DESCRIPTION Featuring slim construction, the SR-S4 series are 2-way line array speakers containing 32 speaker elements. The sound source speaker elements are vertically arranged in close proximity to each other, and form a continuous linear sound source, achieving uniform sound pressure with less attenuation due to distance.
6 4. COVERAGE AREA The line array speaker radiates a sound only within a limited range. Since sound is reduced in areas that are outside the range, take care that the listening area is sufficiently covered when installing the speaker.
7 5.1. Line Array Speaker SR-S4L 5.2. Line Array Speaker SR-S4S 5. DIMENSIONAL DIAGRAM [Front] [Rear] [Side] Blank panel Input terminal panel (The optional MT-S0601 Matching Transformer can be installed inside.
8 6. SINGLE-AMPLIFIER DRIVE AND BI-AMPLIFIER DRIVE The SR-S4 series speakers are factory-preset to be driven by a single amplifier, however this setting can be changed to a bi-amplifier drive system by changing the speaker's internal wiring. (See p.
9 8. CHANGING TO HIGH IMPEDANCE The SR-S4 series speakers can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer. To install the MT-S0601 transformer, remove the blank panel located on the speaker's rear panel.
10 9. JOINING SPEAKERS Joining line array speakers configures a longer linear sound source, permitting richer low-frequency sound reproduction as well as transmission of higher sound output over a longer distance. To join speakers, use the optional SR-EP4 Extension Plate.
11 10. A TT ACHING THE PROTECTION P AD T O THE SPEAKER EDGE Remove the protective paper of the double-faced tape affixed to the SR-PP4 Protection Pad (optional) and attach the pad to the speaker edge as shown in the figure. When installing the speaker at head height, attach the optional SR-RP4 Protection Pad to the speaker edges.
12 1 1. CHANGING SINGLE-AMPLIFIER DRIVE TO BI-AMPLIFIER DRIVE SYSTEM The single-amplifier drive system can be changed to a bi-amplifier drive system by changing the speaker's internal wiring after removing the input terminal panel located at the back of the speaker.
13 12. INTERNAL WIRING DIAGRAM FOR THE BI-AMPLIFIER DRIVE SYSTEM The diagram below is an internal wiring after the speaker's drive system is changed to a bi-amplifier system.
14 13. DIGIT AL PROCESSOR FIL TERING 13.1. Single-Amplifier Drive (Factory-Setting) Although the speaker can be operated without a digital processor, it is recommended that the speaker be used in conjunction with a digital processor for better sound reproduction.
15 14. SPECIFICA TIONS 14.1. Line Array Speaker SR-S4L, SR-S4S Note: The design and specifications are subject to change without notice for improvement. • Accessories Bi-amplifier rating label ................................... 1 Bi-amplifier terminal label .
Printed in Japan 133-05-385-40 14.2. Extension Plate SR-EP4 (optional) The SR-EP4 is used to join multiple SR-S4L or SR-S4S speakers. One complete set consists of 2 brackets.
Een belangrijk punt na aankoop van elk apparaat TOA Electronics SR-S4S (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen TOA Electronics SR-S4S heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens TOA Electronics SR-S4S vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding TOA Electronics SR-S4S leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over TOA Electronics SR-S4S krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van TOA Electronics SR-S4S bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de TOA Electronics SR-S4S kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met TOA Electronics SR-S4S . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
