Gebruiksaanwijzing /service van het product IK-HD1D van de fabrikant Toshiba
Ga naar pagina of 35
For Customer Use Enter below the Serial # which is located on the bottom of the cabinet. Retain this information for future ref- erence. Model # IK-HD1D Serial # CAMERA CONTROL UNIT INSTRUCTION MANUAL.
2 SAFETY PRECAUTIONS Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data.
3 Disclaimer We disclaim an y responsibility and shall be held harmless for any damages or losses incurred b y the The following description is for that a camera head “IK-HD1H” connected to this camera control unit. user in any of the f ollowing cases: 1.
4 1 CAUTIONS ON USE AND INSTALLATION ............................................ 2 COMPONENTS ....................................................................................... 3 ITEMS CONTROLLED BY THE ON SCREEN DISPLAY ........................
5 (2) External sync frequency range .................................................................................... (3) Using the unit with external sync signal ....................................................................... (3.1) H (Horiz ontal) phase adjustm ent .
6 1 Camera Control Unit ............................................................................................... 1 2 Accessori es a Instruction manual ........................................................................................ 1 2.
7 Available selections Item Preset value (Factory s etting) MANUAL AUTO, MANUAL, SS MODE OFF OFF AUTO, MANUAL, OFF MODE OFF AWB AWB, ATW, MANUAL MODE AUTO level -100 0 100 0 AUTO peak/average 00 10 05.
8 3 4 2 1 12345678 9 10 11 12 13 14 15 16 18 17 19 20 21 22 23 24 1 2 5 87 43 6 Camera cable for “IK-HD1H” terminal POWER switch POWER LED FILE button GAIN button DISP button P AGE button MENU UP .
9 㽽 DC IN 12V terminal Accept a DC power input (12V). 㽾 Y/G terminal Outputs Y or G. (BNC connector) 㽿 P B /B terminal Outputs P B or B. (BNC connector) 㾀 P R /R terminal Outputs P R or R. (BNC connector) 㾁 REMOTE terminal To connect to a RS-232C device for remote control function.
10 DC IN 12V 1 +12V 2 +12V 3 GND 4 GND REMOTE 1 2 3 4 5 6 7 8 NC NC NC TXD GND RXD NC NC Connector : TCS7926-18-301 (HOSIDEN) Mating Plug : TCP8580 (HOSIDEN) DVI-D 1 2 3 4 5 6 7 8 NC NC NC NC NC Data2.
11 㽲 Ref er to the item “5. CONNECT ION”, to connect the equipment c orrectly. A camera head "IK-HD1H" needs to be connected to this camera control unit from this section on.
12 AT W Automatic Tracking White Balance 䋩 䋩 䋩 䋩 AW B 䋨 䋨 䋨 䋨䋨 䋨 䋨 䋨 Automatic White Balance 䋩 䋩 䋩 䋩 MA NU A L 䋨 䋨 䋨 䋨 Manual White Balance 䋩 䋩 䋩 䋩 Outline The camera m easures the object color tem perature and adjusts the white balance automatically.
13 Meaning Display A WB OK Automatic white balance adj ustment f inished correctly. A WB NG LEVEL LOW Automatic white balance adjustm ent cannot be perf ormed bec ause the vide o level is too low. Adjust the video level by increasing the illumination or opening the lens iris.
14 Five scene files (A, B, C, D, E) are available as user memories for this unit. These are chosen depending on shooting conditions. By using the [FILE] button, the camera operation is changed immediately from the currently selected Scene File to the next.
15 Due to the lens used or the environmental condition, color shading may occur at the upper and lower edge of the screen. If this happens, the shading correction function can be used to decrease the amount of color shading.
16 Various setti ngs can be control led on the unit b y using the on scr een menu disp layed on the m onitor. The contents once set are memorized in the scene files (A, B, C, D, E) selected, so if the power turns off, it is unnecessar y to set again when us ing the unit nex t time.
17 䊶 Select the menu to change the setting by referring to the item “7.1 Using the Menus ”. 䊶 When the [MENU UP], [MENU DOW N] buttons are pushed, the “ 㸢 ” on the s creen m oves up and down. Move the “ 㸢 ” to the item whose setting you wish to change.
18 䋨 䋨 䋨 䋨 1 䋮 䋮 䋮 䋮 1 䋩 䋩 䋩 䋩 Changing the setting in AUTO mode Shutter mode AUTO, MANUAL, SS Video level adjustment -100 to 100 Peak and average ratio adjustment 00 10 to 10 .
19 (d) Changing the automatic shutter zone area The available picture area is shown by the shading correction on the screen that is parted in 64. 㽲 Move the “ 㸢 ” to AREA by pus hing [MENU UP], [MENU DOW N] buttons. 㽳 Select the measurem ent light area by pushing [DATA UP], [DATA DOW N] buttons.
20 䋨 䋨 䋨 䋨 1 䋮 䋮 䋮 䋮 2 䋩 䋩 䋩 䋩 Changing the setting in M ANUAL mode Shutter mode AUTO, MANUAL, SS -- 1 SHUTTER -- <FILE A> Shutter speed setting MODE MANUAL OFF, 1/100s, .
21 2 GAIN (Video gain) GAIN has three modes ; AUTO, MANUAL, OFF. Move the “ ” to MODE, push the [DATA UP], [DATA DOWN], and select one of the three modes : AUTO, MANUAL, OFF.
22 䋨 䋨 䋨 䋨 3 䋩 䋩 䋩 䋩 WHT BAL(White Balance) The W HT BAL has three m odes; AW B, AT W , MANUAL. Move the “ ” to MODE, push the [DATA UP], [DATA DOWN], and select one of the three modes : AWB, ATW, MANUAL.
23 䋨 䋨 䋨 䋨 3 䋮 䋮 䋮 䋮 2 䋩 䋩 䋩 䋩 Changing the setting in ATW(Auto matic Tracking White balance) mode White balance mode AWB, ATW, MANUAL -- 3 WHT BAL -- <FILE A> R PAINT ad.
24 䋨 䋨 䋨 䋨 3 䋮 䋮 䋮 䋮 3 䋩 䋩 䋩 䋩 Changing gain in M ANUA L mode White balance mode AWB, ATW, MANUAL Red gain adjustment -100 to 100 -- 3 WHT BAL -- <FILE A> Blue gain adjus.
25 䋨 䋨 䋨 䋨 4 䋩 䋩 䋩 䋩 PROCESS Gamma correctio n ON, OFF Gamma correction level setting -10 to 10 -- 4 PROCESS -- <FILE A> GAMMA ON/OFF ON GAMMA 0 Detail gain setting -7 to 7 DTL G.
26 䋨 䋨 䋨 䋨 4 䋮 䋮 䋮 䋮 3 䋩 䋩 䋩 䋩 Changing detail (outline) gain 㽲 Move the “ 㸢 ” to DT L GAIN by pushing [MENU UP], [MENU DOW N] buttons. 㽳 Select the desired value of the detail gain by pushing [DATA UP], [DAT A DOW N] buttons .
27 䋨 䋨 䋨 䋨 5 䋩 䋩 䋩 䋩 MA TRIX(Matrix color correction) Matrix color correction ON, OFF Red hue setting -- 5 MATRIX -- <FILE A> Yellow hue setting R e d g a i n s e t t i n g MATRI.
28 䋨 䋨 䋨 䋨 6 䋩 䋩 䋩 䋩 SYNC When an exter nal sync s ignal is input, the displa y changes f rom INT (internal sync) to EXT. (external s ync) automatically. I N T E X T 䋨 䋨 䋨 䋨 6 䋮 䋮 䋮 䋮 1 䋩 䋩 䋩 䋩 INT screen -- 6 SYNC -- <FILE A> MODE INT 䋨 䋨 䋨 䋨 6 䋮 䋮 䋮 䋮 2 䋩 䋩 䋩 䋩 Changing EXT.
29 䋨 䋨 䋨 䋨 7 䋩 䋩 䋩 䋩 OPTION OUTPUT Y/P b /P r , RGB SHADING MODE SET, MANUAL, OFF -- 7 OPTION -- <FILE A> RS232C baud rate 9600bps, 19200bps OUTPUT Y/P b /P r OSD OUTPUT ALL ON, .
30 䋨 䋨 䋨 䋨 7 䋮 䋮 䋮 䋮 5 䋩 䋩 䋩 䋩 Changing RS232C baud rate 䋨 䋨 䋨 䋨 7 䋮 䋮 䋮 䋮 6 䋩 䋩 䋩 䋩 Changing OSD OUTPUT mode 㽲 Move the “ 㸢 ” to BAUD RATE by pushing [MENU UP], [MENU DOW N] buttons. 㽳 Select either 9600bps or 19200bps by pushing [DATA UP], [DATA DO W N] buttons.
31 The unit can be used wi th an ex t er na l sy nc si gn a l co nne ct ed t o EX T. SY NC te rmi na l on th e re ar pa ne l. W hen the external s ync signal is input, the camera autom atically switches its sync from the internal sync to the external sync.
32 Items to be checked Symptom No picture 䍃 Is power supplied cor rectly? 䍃 Is the lens iris adjusted c orrectly? 䍃 Is the power switch on, and the power LED illuminated? 䍃 Are the camera and .
33 Power supply 12V DC 㫧 10% Power consumption Approx. 10.3 W (including a camera head) Pick-up system RGB, 3CCD, Micro prism system Image sens or 1/3 inch, IT 䋭 CCD Output pixels Horiz ontal : 1920, Vertical : 1080 Scanning system 2 䋺 1i n t e r l a c e Scan frequency [59.
34 Unit : mm [inch] 10. EXTERNA L APPEA RANCE DIA G RA M 3 4 2 1 12345678 9 10 11 12 13 14 15 16 18 17 19 20 21 22 23 24 1 2 5 87 43 6 㪋㪋㪅㪍㩷㪲㪈㪅㪎㪍㪴 㪋㪇㩷㪲㪈㪅㪌㪏㪴 㪈.
Limited Warranty – T OSHIBA CCD Camera The Imaging Systems Division of T oshiba America Information Systems, Inc. ("ISD") makes the f ollowing limited w arranties with regard to this CCD Camera ("Product"). These limited w arranties extend to the Original End-User ("Y ou[r]").
Een belangrijk punt na aankoop van elk apparaat Toshiba IK-HD1D (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Toshiba IK-HD1D heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Toshiba IK-HD1D vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Toshiba IK-HD1D leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Toshiba IK-HD1D krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Toshiba IK-HD1D bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Toshiba IK-HD1D kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Toshiba IK-HD1D . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
