Gebruiksaanwijzing /service van het product IK-WP41A van de fabrikant Toshiba
Ga naar pagina of 59
NETWORK CAMERA Model: IK-WP41A User’s Manual For information on ou r latest products and peripheral devices, refer to the following Website: http://www .toshibase curity .com If the URL changes, refer to the T oshiba website (http://www .tosh iba.
1 T able of Conte nts Introduction ......................................................................................................................................... 2 FCC (USA)-INFORMA TION .....................................................
2 Introduction FCC (USA )-INFORM A TION NOTE: T his equipme nt has been tested and foun d to compl y with the limits for a Class A digital devi ce, pursuant to Part 15 of the FCC Rul es. These limits ar e designed to pr ovide reas onable prote ction ag ainst harmful interference w hen the equip ment is op erated in a commercial environment.
3 Thank you for pur chasing th e IK-W P41A Network Camera. Before usi ng the camera, read this Us er ’s Manual c arefully to ensu re correct u sage. After reading this User ’s Manual, s ave it for future refer ence. The design, speci fications, so ftware, and manual contents ar e subject t o change without prior n otice.
4 Important Safeguards 1. Read Instructions Read all the safety and ope rating instructions before operating the product. 2. Retain Instructions Retain the safety instructions and user's manual for future reference. 3. W arnings Comply with all warnings on the p roduct and in the user's manual.
5 12. Lightning For additional protection on this camera during a lightning storm , or w hen it is left unattended and unused for long period s of time, unplug it from the wall outlet and disconnect the power supp ly and cable system. Th is will prevent damage to the camera due to lightning and power-line surges.
6 Important Safeguards (Cont.) CAUTION TO REDUCE THE RISK OF ELECT RIC SHOCK. DO NOT REMOVE COVER. NO USER SERVICEABLE P A RTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE P ERSONNEL.
7 Notes on Use and Installation Do not aim the camera at th e sun Never aim the camera at the sun even wit h the camera power off. Do not shoot int ense light Intense light such as a spotli ght may cau se a blo om or smear . A vertical stripe may appear on the screen.
8 Precautions for Use Disclaimer W e di sclaim any respons ibility and shall be held harmless for any damages or losses incurred by the user in any of the follow ing cases: 1. Fire, earthquake o r any other act of God; acts by third parties; misuse by the user, w hether intentional or accidental; use under extreme ope rating conditions.
9 Package Contents IK-W P41A ---- 1 Allen wrench ---- 1 T orx wrench ---- 1 Screw (1/4-20 UNC, 12mm) ---- 1 RJ45 Coupler ---- 1 Silica-gel ---- 1 CD-ROM ---- 1 Quick Start gu ide and Import ant Safegu.
10 Hardw are Reset Occasionally resetting the system can return the camera to normal ope ration. If the system problems remain a fter resetting, restore the fac tory settings and install a gain. The IK- W P41A has a res et terminal and default te rminal.
1 1 Installation Hardw are Installation Please verify that your product pa ckage contains all the accessories listed in the Package Contents listed on page 7. Depending on the user’s application, an Ethernet cable may be needed. The Ethernet cable should meet t he sp ecs of UT P C ategory 5e or higher.
12 2. The micro SD/SDHC card is inserted in direction of the following picture.( The contacts face downward.) A cce ssing the Netw ork Camera This chapter explains how to a ccess the Network Camera through web browsers or RTSP players. Using Web Br ow sers Use IP Camera Finde r to access the Network Cameras on the LAN.
13 4. If it is the first time installing the network camera, an information bar will pop up a s shown below. Follow the instru ctions to install the required plug-in on your computer. NOTE: The administrator log-in ID and password are set to "admin" and to "1234" respectively by default.
14 3. Refresh your web browser, then install the Active X® control. Follow the instructions to complete insta llation. Using RTSP Pla yers To view the H.264 stream ing media using RTSP player, you can u se VLC media player. And set the RTSP port to 554.
15 Live Video A click of t he Menu button on the left of a screen displays MENU . MENU PTZ Co ntrol, Snapshot , Resiz e ON/OFF , J PEG, an d Close are disp layed.
16 PTZ Control Pan/T ilt Mouse P TZ: Use Mo use PTZ t o con trol th e camera PTZ by cli cking the scre en and sl iding t he mouse i n that d irecti on Zoom IN /OUT is co ntrolle d by th e mouse s croll w heel.
17 Zoom / Focus / Iris Zoom In / Zoo m Out: Zoom In expand s the view and Zo om Out r educest he view . Click and hold t o continu ously z oom the camera. Focus Ne ar / Fo cus Fa r: When cli cked, focus w ill be set to manual mode a nd the lens focus wi ll be adj usted.
18 Frame: Operati on of zo om and ti lt is the same as in Auto Scan. Th e camer a will move in 45-degr ee incr ements ( called s tops) horizontally until a manual pan, ti lt, z oom, or Stop op eration i s per formed. Random: Operati on of z oom and tilt is the sam e as i n Auto Sc an.
19 OFF: S creen siz e is no t resiz ed even i f windo w size o f live v ideo is change d. Close A Menu is closed. Configuration This window and Live Video screen open first. If you click Configuration , this live video screen will close. After clicking Configuration , this Informa tion wi ndow will open.
20 NOTE: Click the “Save” button to save se ttings. Or click the “Reset” button to reset the data before changes. And you can click the “Default” button to bring back factory defaults.
21 Image: Automatic Exposure Automatic Exposure contro ls the light intensity of picture. T wo types of speci fic appli cation c onditi ons can be selec ted. Y ou ca n select “Full Automat ic” or “ Shutter Priori ty” by the camera depending on your applica tion e nvironme nt.
22 Compensation are d isabled. EV adjustment EV adjustment is called exposu re compensation that tells the camera for a particular scene you want it either brighter (zero to +7) or darker (zero to -7). Set the value of EV adjustment f rom -7 to 7, which is available under Full Aut omatic mo de.
23 perform this function. Focus Mode There are three modes to choose, the default is ‘Aut o’. Manual: Press NEAR and F AR to control focus on the PTZ Control interface. A ut o: The Auto mode automatically adjusts the focus position to the best of the picture in a cente r .
24 W hen there are both very brig ht po rtion and very dark portion simultaneously in the f ield of view , you can enable W DR function. It optimizes an image to ens ure that dark areas are more visible while retaining details in b right areas.
25 down).Set the elevation of camera from 0° ~92. T ilt-Angle mode Set up the limit value of camera’s tilt ang le: Indoo r 85° o r Outdoor 92° .
26 A ut o Patrol Patrol Y ou can set four groups of p reset positions. Stop time Set stop time for auto/ frame /random scan a s 3 / 5 / 7 / 15 / 30 / 60s. Preset setting The auto patrol fun ction wi ll continu ously scan up to 128 preset positions.
27 mask adjusts with the pan , tilt and zoom of the camera. NOTE: UP to 8 masks can be set on the screen. Masking areas are only rectangles. W hen using the PTZ function the privacy zone, although the image under a mask can sometim es be seen, it is not malfunction.
28 Check the checkbo x “ON”, then press the “Set Masking Zone” button. Then a “Camera-Privacy Zone Masking Se ttings” pops out. Use mouse to drag a mask rectangle on the screen, click “Save” to save settings.
29 Video Codec H.264 MJEPG Image Higher resolution results in larger image sizes. Y ou can set H264(1080P) H264(720P)+MJPEG(720P) H264(480P)+MJPEG(480P) H264(VGA)+MJPEG(VGA) H264(VGA)+MJPEG(QVGA) H264(QVGA)+MJPEG(QVGA) H264(720P)+MJPEG(CIF) H264(720P)+MJPEG(QVGA) Default image Selection of the video codec of the image after the came ra powers ON.
30 Multicast Ad dress Specify the multicast addre ss (e.g. of the switch or router) H264 T ransfer T ype Select “Unicast” or “Multicast”. I n “Multicast” mode camera supports IGMP . H264 RTSP Port Number Specify the port number you would like to use fo r R TSP protocol, from 1 to 65530, default is 554.
31 The status of the alarm blinks abo ve the live video screen. Double click the status to clear the alarm NOTE: The “Input T ype” and “Actions” settings are enabled when a larm is not set to “OFF”. Motion Detection 1) Function ON: Camera detects motion .
32 NOTE: The status of the alarm blinks above the live video screen. Double click the status to clear the alarm Motion detection doesn’t work during PTZ. Even if a scene is changed by PTZ, detection area is not changed automatically . setup the detection a rea again.
33 SD Recording Y ou can save image files in micro SD card. This menu will not show unless you insert the micro SD card. NOTE: Supported for Class4 of micro SDHC (SD High Capacity) under 32GB.
34 1. Recording Condition: Y ou can save image files based on your scheduled recording, or Event Recording se ttings. Scheduled Recording T able: Determine the recording condition: OFF , All Day , S chedule 1 or Schedule 2 from the recording schedule table for all days from Monday to Sunda y .
35 FTP Recording Y ou can save image files via FTP . Setting your FTP recording condition first, and the n identity your FTP sever 1 and 2. 1. FTP Recording Conditions Y ou can store your image files based on your scheduled recording, or recording by alarm, or recording by motion.
36 a) Recording by Alarm In Perform "Alarm input setting" first, Then record in the following sequence : Pre-recordin g: Set the number of images to be recorded befo re an alarm occurs. Images of the moment when an alarm occurs are not included.
37 FTP Port Number: set “21” as default. FTP Mode: PORT mode- This mode is for most FTP application s. P ASV mode-This mode is for the camera's network environme nt is behind a firewall. FTP Connecting Method: Reconnect- The network camera logs in/out for each file transfer .
38 The network camera automat ically stores images in the SD card when images cannot be recorded in the server due to a network failure, or other trouble. The stored images can be transferred to the F TP s erver w hen the network status or other troubles are re solv ed.
39 Password (Confirm): Confirm your e -mail passw ord. Administrator E-mail Address: Input your e-mail address. Press “save & t est e-mail” button t o sav e your setting and to test y our e-mail.
40 A udio Y ou can setup audio setting. Refer cable connect ion shown page 17 in QSG. Format: Support three audio Video Codec formats of PCM, G71 1-Alaw and G71 1-Ulaw . Audio Input: Set to "ON" when rece iving audio from a microphone connected to the camera.
41 Netw ork Settings Basic.
42 Camera Name: Ente r your camera name. Thi s name is displayed a s the camera name of Configurat ion w indo w and on the frame of Internet explorer of a Live Video window . DHCP (Def ault is ‘ON’.): The IP address is automatically obtained when you select “ON”; otherwi se, se lect “OFF” to setup the static IP address.
43 Server . Enter a user ’s id in the “User ID” field. Enter a password in the Pa ssword field. Re-enter a password to conf irm it. Finally , click Save to save the settings. FTP Server This section explains how to conf igure the FTP serv er fo r the network camera.
44 Administrator Password A dmini strator Informa tion: Y ou can setup User ID and pa ssword. The default setting for adm inistrator ID and password are: Admin: ID: admin Password: 1234 Y ou can adjust your unique Ad ministrator ID and password at this field.
45 Enter an ID in the User ID field. Enter a password in the Pa ssword field. Re-enter the password again t o confirm. Finally , click “Sa ve” to save the settings. Date/Time Date and T ime setting Enter the date and time to set up system time manually .
46 Daylight saving Select ON to activate the daylig ht-saving fun ction if y ou are in a daylight- saving time (effective for NTP mode only). FW Update Y ou can update system firm ware once the update file is available. It is the customer's responsibility to update firmware.
47 E xport Configuration Settings This function is designed to export configuration settings to the client PC. Re store Factory Default This function is designed to reset all configuration settings into factory default except for IP address, ID/Password and Camera Name.
48 Display all: Y ou ca n display all logs from the came ra. Condition Settings (Log filter): a) Display “Most recent” or “Old” logs (inpu t 1 to 8190). b) Display logs with keyword. c) Display logs by Date and T ime. NOTE: If you click ‘Delete Logs’, all lo gs will disappear .
49 Specification I m ag e d e vi ce 1/ 2. 8 T y pe CM O S O pt ical z oo m 20 X Fo c al le n gt h f=4. 7mm (wid e) t o 94 .0 mm (tel e ) F-n umber F1 .
50 ● Designs and s pecifications may change without prior notice for better improvem ent. ● Screens, photos, illustration s and other diagrams contained in this user's manual may slightly change from actual on es. *1: Varies in accordance with the object , image quality , net work environment and performance of the persona l computer used.
51 Technolog y License Notice A bou t the softwa re This product contains a pi ece of software li censed to TO SHIBA CORPO RATION (hereafter TOSHIBA) by a third party . The copyright and other intellectua l property rights of the softw are are held by this third party or the licensor.
52 get the source c ode. And you must show them these t erms so they know their rights. We protect y our rights wit h two steps: ( 1) copyright the softw are, and (2) offer you this license which gives y ou legal permiss ion to copy, distribute and/or mod ify the softw are.
53 files and the date of any change. b) You must cause any w ork that you dist ribute or publish, t hat in whole or in part contai ns or is derived fro m the Program or any part thereo f, to be licensed as a whole at n o charge to all third parties under the term s of this License.
54 Subsection b ab ove.) The source c ode for a work means the preferr ed form of t he work for maki ng modifications to it. For an exe cutable work, complete source c ode means all the source code fo.
55 the balance of the section is inte nded to app ly and the section as a whole is int ended to app ly in other circumst ances. It is not t he purpose of this sect ion to induce y ou to infringe any p.
56 YOU. SHOUL D THE PRO GRAM PROVE DEFECTIVE, Y OU ASSUME T HE COST O F ALL NECESSA RY SERVICIN G, REPAIR OR CO RRECTION. 12. IN NO E VENT UNLES S REQUIRED BY APPLICAB LE LAW OR AG REED TO IN WRITING .
57 General Publ ic License. Of cours e, the com mands you use may be called so mething other than `show w' and ` show c'; t hey could even be mouse-clicks or menu items--whate ver suits y our program.
58 TOSHIBA AMERICA INFORM A TION SYST EMS, INC. Surveillance & IP Video Products 9740 Irvine Boulevard, Irvine, CA 92618-1697 Phone Number: (877) 855-1349.
Een belangrijk punt na aankoop van elk apparaat Toshiba IK-WP41A (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Toshiba IK-WP41A heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Toshiba IK-WP41A vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Toshiba IK-WP41A leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Toshiba IK-WP41A krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Toshiba IK-WP41A bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Toshiba IK-WP41A kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Toshiba IK-WP41A . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
