Gebruiksaanwijzing /service van het product CX3400 van de fabrikant Behringer
Ga naar pagina of 22
1 SUPER-X ® PRO CX3400 www.behringer.de Version 1.0 December 1999 Users Manual ENGLISH.
2 acc. to the Directives 89/336/EWG and 73/23/EWG We, BEHRINGER INTERNA TIONAL GmbH Hanns-Martin-Schleyer-Straße 4 D - 47877 Willich Name and address of the manufacturer or the introducer of the prod.
3 This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
4 SUPERX ® PRO HIGH-PRECISION STEREO 2-WAY / 3-WAY / MONO 4-WAY CROSSOVER WITH LIMITERS MODEL CX 3400 s Professional high-precision stereo 2-way / 3-way / mono 4-way crossover s World-class perfor.
5 FOREWORD Dear Customer, Welcome to the team of SUPER-XPRO users and thank you very much for expressing your confidence in BEHRINGER products by purchasing this crossover.
6 T ABLE OF CONTENTS 1. INTRODUCTION ................................................................................................................. ..... 7 1.1 Multi-way speaker systems ..............................................................
7 1 . INTRODUCTION Thank you very much for expressing your confidence in BEHRINGER products by purchasing the SUPER-X PRO CX3400. + This manual first describes the terminology used, so that you can fully understand the CX3400 and its functions. Please read the manual carefully and keep it for future reference.
8 2.1 Before you begin Your BEHRINGER SUPER-X PRO CX3400 was carefully packed in the factory and the packaging is designed to protect the unit from rough handling. Nevertheless, we recommend that you carefully examine the packaging and its contents for any signs of physical damage, which may have occurred during transit.
9 Fig. 2.2: Proper selection of the two MODE buttons for stereo 2-way operation Subsequently, the LEDs above the active controls on the front panel light up, signaling which controls are active in the operating mode you just selected. The functions of these controls can be seen from the second strip label.
10 Fig. 2.4: Active control element s on the rear panel of the SUPER-X PRO 1 Use the enclosed power cord to connect the unit to the mains. 2 FUSE HOLDER / VOLTAGE SELECTOR . Please make sure that your local voltage matches the voltage indicated on the unit, before you attempt to connect and operate the CX3400.
11 Fig. 2.6: Active control elements on the front panel of the SUPER-X PRO 1 and 16 INPUT control . This control adjusts the input gain from +12 to -12 dB. 2 LOW CUT button . This button activates the 25-Hz high-pass filter protecting the woofers against low- frequency signals.
12 + Always switch off the entire system before you press this button, as it produces heavy interference noise that could damage your speakers and/or other equipment.
13 6 LOW OUTPUT control . Controls the output level of the Low band from +6 to -6 dB. 7 LOW PHASE INVERT button . This button reverses the polarity of the Low output. 8 LOW MUTE button . Mutes the Low band. 9 LOW-MID OUTPUT control . Controls the output level of the Low-Mid band from +6 to -6 dB.
14 3. APPLICATION 3.1 Tools The following tools are indispensable for a perfect system alignment. You should by all means try to obtain the speaker specifications from the manufacturer, in order to operate the systems in their proper frequency and level ranges.
15 3.3.1 Finding drop-outs in the frequency response Check the entire frequency response of the system. Rooms have quite an impact on the frequency response of speaker systems, due to resonance and various reflections. So, you cannot expect to achieve a linear frequency response right from the start.
16 3.5.2 Basics of electronic runtime correction It is important to know how the dimensions of time and space are connected with each other, e.g. by using a tape measure and a pocket calculator. Example: a delay of 2 ms corresponds to a distance of 68.
17 Modern systems often use bass reflex cabinets for their woofer or sub-woofer systems. Consequently, when stacking the cabinets, the drivers are usually aligned along the vertical axis of the speaker front, or can at least be aligned using the available control range of the SUPER-X PRO.
18 The limiter threshold can be set from -6 dB to OFF and acts on all six limiters at the same time. Still, each limiter band works independently, with the LIM-LEDs lighting up as soon as the associated limiter is activated. + Please note that the limiters in the SUPER-X PRO are no hard ratio limiters, i.
19 4.2 Mains connection Before you connect your SUPER-X PRO to the mains, please make sure that your local voltage matches the voltage required by the unit! The fuse holder on the female mains connector has 3 triangular markers, with two of these triangles opposing each other.
20 Fig. 8.3: Different plug types 5. SPECIFICATIONS INPUT Connectors X L R T yp e Electronically servo-balanced, RF filtered Impedance Balanced >50k Ohms, unbalanced >25k Ohms Max.
21 PERFORMANCE Bandwidth 20 Hz t o 2 0 kHz, +0/-0.5 dB Frequency Response <5 Hz to >90 kHz, +0/-3 dB Signal to Noise Ref.: +4 dBu, 20 Hz to 20 kHz, unweighted Stereo Mode: Mono Mode: Low Output .
22 The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER GmbH.
Een belangrijk punt na aankoop van elk apparaat Behringer CX3400 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Behringer CX3400 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Behringer CX3400 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Behringer CX3400 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Behringer CX3400 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Behringer CX3400 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Behringer CX3400 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Behringer CX3400 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
