Gebruiksaanwijzing /service van het product TDP-P8 van de fabrikant Toshiba
Ga naar pagina of 42
2 SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is int end ed to ale rt the us er t o the presence of uninsulated “dangerous voltage ” within the product’s enclosure that may be of suffi cient magnitud e to constitute a risk of electric shock to persons.
3 - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
4 IMPORTANT SAFETY INSTRUCTIONS CAUTION: P L E A S E R E A D A N D O B S E R V E A L L W A R N I N G S A N D INSTRUCTIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety.
5 5 . Heat The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifi ers) that produce heat.
6 IMPORTANT SAFETY INSTRUCTIONS (Continued) 10 . Lightning storms For added protection for this product during storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges.
7 Introduction 1 5 . Accessories Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serio us damage to the product. A product and cart combination should be moved with care.
8 IMPORTANT SAFETY INSTRUCTIONS (Continued) 1 9 . Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specifi ed by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fi re, electric shock, or other hazards.
9 POWER SUPPLY CORD SELECTION If your line voltage is 220 to 240V, use one of the following types of cable. Plug configuration Plug type Australian 240V 10A North American 240V 15A Switzerland 240V 6 .
10 IMPORTANT PRECAUTIONS (Continued) EXEMPTION CLAUSES • Toshiba Corporation bears no responsibility in the case of damages arising from natural disaster such as earthquakes, lightning, etc.
11 OTHER CAUTIONS AND INFORMATIONS Copyrights Showing or transmitting commercial imaging software or broadcast or cable-broad casting programs with the purpose of other than the personal and private v.
12 REMOTE CONTROL BATTERIES Caution • Never throw batteries into a fi re. Notes • Be sure to use AAA size batteries. • Dispose of batteries in a designated disposal area. • Attention should be drawn to the environmental aspects of battery disposal.
13 Table of Contents Table of Contents ....................................................................................... 13 Introduction ................................................................................................ 14 Package Overview .
14 Introduction Power Cord 3m VGA Cable 3m Remote mouse Control with Laser Pointer AAA battery for mouse remote control(2) USB Cable 3m Projector with lens cap Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete.
15 Introduction (Continued) 1. Control Panel (See page 16 for detailed information.) 2. Zoom Lever 3. Focus Ring 4. Projection lens 5. Lens Cap 6. Foot adjuster 7. Front foot adjuster release button 8. Infrared remote sensor 9. Rear panel (Connection external devices.
16 Introduction (Continued) Control Panel 1. Temp Indicator LED (Refer to page 37 for more information.) 2. On indicator light(Refer to page 37 for more information.) 3. LAMP indicator(Refer to page 37 for more information.) Indicates the status of the lamp has developed a problem.
17 Introduction (Continued) Connection Ports 1. Infrared remote sensor 2. AC IN socket(Connect the supplied power cord here.) 3. COMPUTER (Y/P B /P R ) IN terminal RGB : Input analog RGB signal from a computer or other source, or a component video signal (Y/P B /P R ) from video equipment.
18 User Controls Using the Control Panel On / Standby Refer to the “Power On/Off the Projector” section on page 24. Input Press “In put” to c hoose RGB , Compon ent-p, Co mponent-i , S-Vid- eo, Composite Video and HDTV sources. Menu Press “Menu” to launch the on screen display (OSD) menu.
19 User Controls (Continued) Name : Main Function (1) ENTER button : Accepts the selected mode. (2) MENU button : Displays menus. (3) Set up : Set up image and mode. (4) ON/STANDBY button : Turns the power on/off (standby). (5) Transmission indicator : Lights when remote control transmitting.
20 User Controls (Continued) Loading dry-cell batteries into the remote control 1. Remove the battery cover. 2. Insert the dry-cell batteries. Be sure to align the plus and minus ends of the batteries properly.
21 Preparing and using the remote control (Continued) Switching operation mode Operation modes should be switched between projector operation and computer operation. Switching the remote control operation mode. Pressing this button toggles the mode. When this button is lit, the remote control is in [PJ Mode] (Projector operation mode).
22 Operating a computer using the remote control A computer can be operated using the projector’s remote control. This function is available on any computer with the Windows 98/98SE, Windows Me, Windows 2000, or Windows XP OS, that is equipped with a USB port supporting the USB 1.
23 2 1 3 5 4 RGB USB 6 Installation Connecting the Projector To ensure the projector works well with your computer, please set the display mode of your graphic card less than or equal to 1024 X 768 resolution. Make sure the timing of the dis- play mode is compatible with the projector.
24 Turning the power on and off Connecting the power cord Insert the power cord connector into the AC IN socket of the projector. Insert the power cord plug into a wall or other power outlet. Turning the power on Press the ON/STANDBY button. The power turns on , and green indicators light: POWER.
25 • The fi rst time you use the projector after purchase, after the start-up screen, please press “MENU” button. Turning the power off Press the ON/STANDBY button. A message a ppears on the screen, confi rming that you wish to sh ut off the power.
26 Adjusting the Projected Image Adjusting the Projector Image Height foot adjuster 2 3 foot adjuster button The projector is equipped with an elevator foot for adjust- ing the image height. To raise the image: 1. Press the foot adjuster button . 2.
27 Installation (Continued) 64.1" (163.0cm ) 106.98" (271.7cm) 149.78" (380.4cm ) 213.97" (543.5cm ) 261.04" (663.0cm ) 37.0" (93.8cm) 74.0"(187.5cm) 123.0"(312.5cm) 172.2"(437.5cm) 246.0"(625.0cm) 300"(762.
28 Installation (Continued) Adjusting the screen size and focus Use the zooming lever to adjust the screen size. Use the focusing lever to adjust the focus. Notes • Note that a lamp characteristics may rarely cause the brightness to fl uctuate slightly.
29 Using the menus Display the Setting display menu. 1. Press the MENU button 2. Select a Category 3. Adjustments & Settings Select a category by using . There are following five categories: Displays the current adjustments and settings of selected category.
30 Using the menu (Continued) The image adjustment menu Use this menu to adjust image-related items. Item s that can be adj ust ed are mar ked wit h “Yes” , a nd thos e that can not are mar ked wi th “ No”. *1: [Tint] and [NTSC m ode] can be displ ayed a nd adju sted o nly wh en the video signal is se t to [NTSC] and [NTSC4.
31 The display setting menu Use this menu to set screen display-related items. Item Description Screen size (Full): Display with 1024 × 768 dot resolution (Thru): Display with sampling resolution (fo.
32 The default setting menu This menu shows placement status and other settings. Item Description Projection mode Sets projection mode in accordance with Placement Style. Standard : The factory default setting. Rear-Desktop: When you select this function, the projector reverses the image so you can project behind a translucent screen.
33 Manual adjustments and settings The menu items of the Set up menu vary depending on the input type, as shown in the table below. Use the buttons to adjust the items in the table below, then press the button when you are fi nished. Using the menu (Continued) Select Item Description Computer Y/P B /P R Video S-video Auto.
34 Displaying Information (Status display) This displays information about the input signal, lamp use time, etc. “Yes”: displayed, “No”: not displayed Using the menu (Continued) Item Descripti.
35 Problem : No image appears on screen. Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. Ensure the pins of connectors are not crooked or broken. Check if the projection lamp has been securely installed.
36 4. Verify the resolution setting is less than or equal to 1280 x 1024 resolution. 5. Select the “Change” button under the “Monitor” tab . 6. Click on “Show all devices.” Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box.
37 Appendices (Continued) Problem : Image is out of focus Adjusts the Focus Ring on the projector lens. Refer to page 27. Make sure the projection screen is between the required distance 5 to 40 feet (1.5 to 12.2 meters) from the projector. Problem : The image is str etched when displaying 16 : 9 DVD.
38 Replacing the lamp The projector will detect the lamp life itself. It will show you a warning message “The Lamp life is ending” When you see this message, change the lamp. Make sure the projector has been cooled down for at least one hour before changing the lamp.
39 Notes and Precautions • It is recommended that the lamp be replaced after 2,000 hours of use. When [Lamp time] reaches 2,000 hours, the icon and a message will appear with a beep sound. (After 2,000 hours, they will appear when the power is on at the fi rst time every 100 hours.
40 Appendices (Continued) Remark : 1.> “ * ”compressed computer image. 2.> The interlaced analog signals are not supported. Computer Compatibility (Analog) This project supports the following RGB signals. Note, however, that depending on the computer model, the screen may show flicker or streaking.
41 Appendices (Continued) List of general speci fi cations Consumption Power Weight External Dimensions Cabinet material Conditions for usage environment Display pixels Picture elements Lens Lamp Pro.
42 About Lamp About Lamp The product’s light source is a mercury lamp that lights at increased internal pressure. Be sure to fully understand the following character- istics of the lamp and handle it with extreme care. • The lamp may burst with a loud noise due to impact or deteriora- tion, or fail to light at the expiration of its life.
43 About Lamp Lamp replacement A lamp is consumable supplies. If used for extended periods, images will appear dark, and the lamp could burn out. This is characteristic of a lamp, and is not malfunction. (The lifetime of the lamp depends on condi- tion of use.
Een belangrijk punt na aankoop van elk apparaat Toshiba TDP-P8 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Toshiba TDP-P8 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Toshiba TDP-P8 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Toshiba TDP-P8 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Toshiba TDP-P8 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Toshiba TDP-P8 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Toshiba TDP-P8 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Toshiba TDP-P8 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
