Gebruiksaanwijzing /service van het product Network Camera van de fabrikant Toshiba
Ga naar pagina of 24
NETWORK CAMERA Model: IK-WR14A Quick Start Guide and Important Safeguards This guide describes the hardware installation. Refer to the user's manual (PDF le) contained in the CD-ROM for settings, operations and other information. The application Adobe Reader is needed to view PDF les.
2 2 Introduction FCC (USA)-INFORMA TION NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
3 Thank you for purchasing the IK-WR14A Network Camera. Before using the camera, read this quick start guide carefully to ensure correct usage. After reading this quick start guide, save it for future reference. The design, specications, software, and quick start guide contents are subject to change without prior notice.
4 4 T able of Contents Introduction 2 FCC (USA)-INFORMA TION ....................................................................................... 2 T erms and T rademarks .............................................................................
5 Important Safeguards 1. Read Instructions Read all the safety and operating instructions before operating the product. 2. Retain Instructions Retain the safety instructions and user's manual for future reference. 3. W arnings Comply with all warnings on the product and in the user's manual.
6 6 12. Lightning For additional protection on this camera during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the power supply and cable system. This will prevent damage to the camera due to lightning and power-line surges.
7 Important Safeguards (Cont.) CAUTION T O REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER. NO USER SER VICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
8 8 Notes on Use and Installation l Do not aim the camera at the sun Never aim the camera at the sun even with the camera power off. l Do not shoot intense light Intense light such as a spotlight may cause a bloom or smear . A vertical stripe may appear on the screen.
9 9 Setting the Network Camera Environment Items needed for network camera monitoring l Administrator's personal computer The personal computer that allows setting, operating, monitoring and other functions with the network camera is called the "administrator's personal computer" in this guide.
10 10 l IK-WR14A l W aterproof Connector & Bushing l A V Out cable l W arranty Card l Quick Start Guide and Important Safeguards l Gasket, T orx Wrench, Silica Gel and tape, Hex Nut , Screws and A.
1 1 1 1 Physical Description Cover screws Side Opening Cover Dome Cover Replace the side opening cover with the supplied bushing if you want to route cables from the side of camera. The 1/2" (12.7mm) protection conduits and tubing are not supplied.
12 l Front View CAMERA BASE l Rear View IR LEDs (SR-LED) Focus Button Light Sensor Lens Status LED Mounting screws Micro SD/ SDHC Card Slot Recessed Reset Button DIP switch Audio/Video Out (Printed &q.
13 Hardware Installation Bottom of the Camera First, use the supplied torx wrench to detach the dome cover from the camera base. Then, follow the steps below to install the camera; either to a ceiling or to a wall. Connect the appropriate power cables and external devices such as sensors and alarms, to the general I/O terminal block.
14 14 14 1 . Disassemble the components of the waterproof connector into parts (A) ~ (E) as shown above. And Hex Nut is including in the accessory separately . 2. Place the screw nut (E) as shown. 3 . Feed the power cables through the waterproof connector (F --> E --> D --> B --> A) as the ill ust rat io n sh ows .
15 NO TE 4 3 o O g B b G br BR 1 2 3 4 5 6 7 8 o: white/orange stripe O: orange solid g: white/green stripe B: blue solid b: white/blue stripe G: green solid br: white/brown stripe BR: brown solid 3. Y ou will need an RJ45 crimping tool to attach the Ethernet wires to a connec- tor .
16 l Installation should be done only by qualied personnel and conform to all local codes. l Install this camera on a rm and solid part of the ceiling or wall. If installed improperly or on a weak surface, the camera could fall causing injury and damage.
17 POWE R COLLIS ION LIN K RE CEIV E P AR TITIO N 1 2 3 4 5 POWE R COLLIS ION LIN K RE CEIV E P AR TITIO N 1 2 3 4 5 POW ER COL L ISION LIN K RE CEIV E PAR TITIO N 1 2 3 4 5 POW ER COL L ISION LIN K R.
18 POW ER COL LIS ION LINK RE CEIV E PAR TITIO N 1 2 3 4 5 AC24V or DC12V adapter UL Listed Class 2 power supply (not supplied) 18 18 1 2 Ethernet switch (not supplied) General Connection (without PoE) 1. Connect the camera to an Ethernet switch via LAN cable.
19 19 19 Installation Wizard 1. Install the "Installation Wizard" under the Software Utility directory from the CD- ROM. 2. The program will analyze your network environment. After your network is analyzed, please click on the "Next" button to continue the program.
20 20 For more information on camera conguration, please refer to use r's manual on the CD-ROM. 1. Access the Network Camera from the network. 2.
21 21 Adjusting the Lens Based on the live image retrieved from the camera, adjust the camera lens by performing the following: T o adjust the viewing angle 1. T urn the lens module left and right. 2. Loosen the tilt adjustment screws on both side of the camera and then turn the lens module up and down.
22 22 Dome cover 1. Attach the dome cover to the camera and aligning with the mounting holes. 2. Y ou will nd a silica gel bag attached to the dome cover . Remove the supplied sili ca gel from the aluminum foil bag, and replace it t o new silica gel with supplied double-sided tape.
23 23 Access the Network Camera from the browser interface, and click the conguration button onthe main page. Then click the following: Audio and Video Image Zoom and Focus T o adjust the z oom factor and focus range 1. Use the Zoom slide bar to nd an optimal view of the area of interest where you want to adjust its focus.
TOSHIBA AMERICA INFORMA TION SYSTEMS, INC. Surveillance & IP V ideo Products 9740 Irvine Boulevard, Irvine, CA 92618-1697 Phone Number: (877) 855-1349 625016700G.
Een belangrijk punt na aankoop van elk apparaat Toshiba Toshiba Network Camera (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Toshiba Toshiba Network Camera heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Toshiba Toshiba Network Camera vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Toshiba Toshiba Network Camera leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Toshiba Toshiba Network Camera krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Toshiba Toshiba Network Camera bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Toshiba Toshiba Network Camera kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Toshiba Toshiba Network Camera . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
