Gebruiksaanwijzing /service van het product TD-W8901N van de fabrikant TP-Link
Ga naar pagina of 85
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router Rev: 1.0.1 1910010775.
COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., L TD. Other brands and product names are trademarks or registered trademarks of t heir respective holders.
FCC STATEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Ru les. These limits are designed to pr ovide reasonable protectio n against harmful interference in a residential installation.
III This is a Class B product. In a domestic environm ent, this product may cause radio interference, in which case the user may be required to take adequate measures. This device has been designed to operate with the antennas listed below , and havin g a maximum gain of 5dBi.
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通行；經發現有干擾現象時，應立 即停用，並改善至無干擾時方得繼續使用。前項合法通.
TP-LINK TECHNOLOGIES CO., L TD TP-LINK TECHNOLOGIES CO., LTD. Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China DECLARA TION OF CONFORMITY For the following equipment: Product Description: 150Mbps Wireless N ADSL2+ Modem Router Model No.
CONTENTS Package Cont ents .................................................................................................... 1 Chapter 1. Introducti on ......................................................................................... 2 1.1 Product Over view .
4.5.4 UPnP ....................................................................................................................... 62 4.5.5 DDNS ..........................................................................................................
TD-W8901N 1 50Mbps Wireless N ADSL2+ Modem Router User Guide 1 Package Contents The following contents should be found in your package: ¾ One TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router ¾ One P.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 2 Chapter 1. Introduction Thank you for choosing the TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router . 1.1 Product Overview The device is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet or IEEE 802.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 3 ¾ Supports long transfers, the max line length can reach to 6.5Km. ¾ Supports remote configurati on and management through SNMP and CWMP. ¾ Supports PPPoE, it allows connecting the internet on dem and and disconnecting from the Internet when idle.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 4 Chapter 2. Hardware Installation 2.1 The Front Panel Figure 2-1 The LEDs locate on the front panel. They indicate the device’s working st atus. For details, please refer to LED Explanation.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 5 everything have been input correctly. Refer to 4.1.1 Device Info and 4.3.1 Internet for more information. 2.2 The Back Panel Figure 2-2 ¾ POWER : The Power plug is where yo u will connect the power adapter.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 6 ¾ ADSL : Through the port, you can connect the router with the telephone. Or you can connect them by an external separate spli tter. For details, please refer to 2.4 Connecting the Modem Router .
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 7 2.4 Connecting the Modem Router Before installing the device, please make sure y our broadband service provided by your ISP is available. If there is any problem, please contact your ISP. Before cabl e connection, cut off the power supply and keep your hands dr y.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 8 Figure 2-4.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 9 Chapter 3. Quick Installation Guide 3.1 Configure PC After you directly connect your PC to the TD-W 8901N or connect your adapter to a Hub/Switch which has connected to the Router, you need to conf igure your PC’s IP address.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 10 Figure 3-2 Step 3: Select General tab, highlight Internet Protoc ol (TCP/IP), and then click the Properties button.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 11 Step 4: Configur e the IP address as Figure 3-4 shows. After that, click OK . Figure 3-4 ) Note: You can configure the PC to get an IP address automatically, select “Obtain an IP address automatically” and “Obtain DNS server addre ss automatically” in the screen above.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 12 Figure 3-5 If the result displayed is similar to the screen shown belo w, it means t hat your PC has not connected to the Router.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 13 Figure 3-7 Step 1: Select the Quick Start tab, then click RUN WIZARD , and you will see the next screen. Click the NEXT button. Figure 3-8 Step 2: Configur e the time for the Router, and then click the NEXT button.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 14 Figure 3-10 Step 4: Configur e the following options provided by your ISP: Username , Password , VPI , VCI and Connection Type . Then click NEXT . Figure 3-1 1 Step 5: Configur e the rules for the WLAN, and click NEXT .
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 15 Figure 3-12 ) Note: If the Access Point is activated, the wireless f unction will be available even without the external antenna because of an additional prin ted antenna. To adopt the wi reless security protection measures, please refer to 4.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 16 Chapter 4. Software Configuration This User Guide recommends using the “Quick Installation Guide” for first-time installation.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 17 Figure 4-2 ) Note: Click the other submenus Sy stem Log or Statistics in Figure 4-2 , and you will be able to view the system log and traffic statistics about the Router. 4.1.2 System Log Choose “ Status → System Log ” menu, and you will be able to quer y the logs of the Router.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 18 Figure 4-3 The Router can keep logs of all traffic. Yo u can query the logs to find what happened to the Router. Click the CLEAR LOG button to clear the logs. Click the SAVE LOG button to save the logs.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 19 Figure 4-4 ¾ Interface: You can select Ethernet , ADSL and WLAN to view the corresponding network traffic over different ports. ¾ Select Ethernet , and you will see the statistics table as below.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 20 ¾ Select ADSL , and you will see the statistics table as below. Statistics Table: Transmit total PDUs The total PDUs transmitted over the ADSL port. Transmit Statistics Transmit total Error Counts The total errors occurred ov er the ADSL port when dat a is being transmitted.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 21 4.3 Interface Setup Choose “ Interface Setup ”, you can see the next submenus: Internet , LAN and Wireless . Figure 4-5 Click any of them, and you will be able to configure the corre sponding function.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 22 Figure 4-6 ¾ ATM VC: ATM settings are used to connect to your ISP. Your ISP provides VPI (Vir tual Path Identifier), VCI (Virtual Channel Identif ier) settings to you.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 23 • Status: If you want to use a designed VC, you should activate it. • VPI: Identifies the virtual path between endpoints in an ATM network. The valid range is from 0 to 255. Please input the value provided by your ISP.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 24 ¾ Default Route: If enable this function, the current PVC will be considered as the default gateway to internet from this device.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 25 ) Note: Each IP address entered in the fields must be in t he appropriate IP form, which is four IP octets separated by a dot (x.x.x.x), such as 192.168.1.100. The Router will not acce pt the IP address if it is not in this format.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 26 ¾ Encapsulation: For both PPPoA/PPPoE connection, y ou need to specify the type of Multiplexing, either LLC or VC Mux. ¾ Bridge Interface: Activate the option, and the Router can also work in Bridge mode.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 27 Figure 4-1 1 ¾ Router Local IP: These are the IP settings of the LAN interface for the device. These settings may be referred to as Private settings. You may change the LAN IP address if needed.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 28 • Multicast: Select IGMP version, or disable the function. IGMP (Internet Group Multicast Protocol) is a session-layer prot ocol used to establish member ship in a multicast group. The ADSL ATU-R supports IGMP version 1 ( IGMP v1 ), IGMP v2 and IGMP v3 .
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 29 be able to obtain IP address automatically al thou gh the DHCP function is enabled. All the ports are checked by default. ¾ DHCP Table : The information of the DHCP clients will be displayed here • Hostname: Display the name of the DHCP client.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 30 Figure 4-13 • DHCP Server IP for Relay Agent: Enter the DHCP server IP Address runs on WAN side.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 31 Figure 4-14.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 32 ¾ Access point Settings: These are the settings of the ac cess point. You c an configure the rules to allow wireless-equipped computers and other devices to communicate with a wireless network.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 33 ¾ 11n Settings: These are the settings of the 11n par ameters. If “802.11n”, “802.11g+n” or “802.11b+g+n” is selected for Wireless mode , these settings will be displayed. • Channel Bandwidth: Select the Bandwidth you want to use from the drop-down List.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 34 1) WEP-64Bits To configure WEP-64Bits settings, select the WEP-64Bits option from the drop-down list. The menu will change to offer the appropriate settings . WEP-64Bits is a data privacy mechanism based on a 64-bit shared key algorithm, as described in the IEEE 802.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 35 Figure 4-18 ¾ Encryption: Select the encryption you want to use: TKIP/AES, TKIP or AES (AE S is an encryption method str onger than TKIP).
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 36 Figure 4-20 4.3.3.1 WPS Settings ¾ WPS Settings: WPS can help you to add a new wireless device to an existing network quickly. This section will gui de you how to use WPS function. • WPS state: Display the current WPS state.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 37 The WPS Configuration Screen of Wireless Adapter Method Two: Step 1: Click Start WPS button in Figure 4-21 .
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 38 Step 3: Wait for a while until the next screen appears. Click Finish to complete the WPS configuration.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 39 The WPS Configuration Screen of Wireless Adapter Step 2: For the Rou ter, keep PIN code selected and enter the PIN code of the wireless adapter in the field after enrollee PIN code as shown below.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 40 The WPS Configuration Screen of Wireless Adapter ) Note: The default PIN code of the Rout er can be found in its label or the WPS configuration screen as Figure 4-23 . • SSID: Wireless network name shared among all po ints in a wireless network.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 41 • MAC Address: Enter the MAC Address you wish to filter in the field. ) Note: For most users, it is recommended to use t he default Wireless LAN Performance settings. Any changes made to these settings ma y adversely affect your wireless network.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 42 4.4.2 Routing Choose “ Advanced Setup → Routing ” menu, and you will see the rout ing information in the next screen (shown in Figure 4-26 ). Figure 4-26 Click ADD ROUTE button to add a new route in the next screen (shown in Figure 4-27 ).
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 43 4.4.3 NAT Choose “ Advanced Setup → NAT ” menu, you can setup the NAT (N etwork Address Translation) function for the Router (shown in Figure 4-28 ). ) Note: To use the NAT function, the Vi rtual Circuit should not be co nf igured to Bridge mode.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 44 Figure 4-29 ¾ DMZ Host IP Address: Enter the specified IP Addre ss for DMZ host on the LAN side. 4.4.3.2 Virtual Server Choose “ Advanced Setup → NAT → Virtual Server ” in Figure 4-28 , you can configure the Virtual Server in the next screen.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 45 ¾ Virtual Server Listing: This displays the information about the Virtual Servers you establish. To add a virtual server entry: Step 1: Select the “Virtual Circuit” and select “ Virtual Server”.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 46 ¾ Rule Typ: There are four types: one-to-one, Many-t o-One , Many-to-Many Overload and Many-to-Many No-overload. ¾ Local Start & End IP: Enter the local IP Address you plan to map to.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 47 Figure 4-32 ¾ QoS: Select this option to Activa te/Deactivate the IP QoS on different types (IP ToS and DiffServ). ¾ Summary: Click the button to view t he configurations of QoS. ¾ Rule: Configure the rules for QoS.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 48 • Application: Select the application t hat the rule aimed at. • Physical Po rts: Select the port whose traffic fl ow a re controlled by the rule. • Destination MAC & IP & Mask & Port Range: Enter the IP information about the Destination host for the rule.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 49 4.4.5 VLAN Choose “ Advanced Setup → VLAN ”, you can activate the VLAN function in the next screen.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 50 Figure 4-34 ¾ PVID: Each physical port has a default VID ca lled PVID (Port VID). PVID is assigned to untagged frames or priority tagged frames (frame s with null (0) VID) received on this port.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 51 Figure 4-35 ¾ VLAN Index: Select the VLAN index for this VC. You can specify 8 gr oups in maximum.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 52 Figure 4-36 ¾ ADSL Mode: Select the ADSL operation mode wh ich your ADSL connection uses.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 53 Figure 4-38 ¾ ACL: If Activated , the IP addresses which are contai ned in the Access Control List can access to the Router. If Deactivated , all IP addresses can access to the Router. ¾ ACL Rule Index: Select the ACL rule index for the entry.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 54 4.5.2.1 IP Filter Select IP /MAC Filter as the Filter type, and select IP as the Rule type (shown in Figure 4-39 ), then you can configure the filt er rules based on IP address. The filtering includes Outgoing and Incoming , the detailed descriptions are provided below.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 55 ) Note: If select PVC0~PVC7 as an interface, the filter will match the IP traffic of WAN port with specified IPs (Source IP Address and Destination IP Address). If select LAN as an inte rface, the filter will match the IP traffic of LA N port with specified IPs.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 56 as follows. Presume the rules ar e both aimed at the interface PVC 0, and their ind exes are (1, 1), (1, 2) and (1, 3). Step 1: Select the “IP/MAC Filter” as t he Filter Type Selection (show in Figure 4- 39 ).
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 57 Step 6: Go to Step 2 to configure the next two rule s: Block E-mail received by the IP addres s 192.168.1.7 on your local network; Make t he PC with IP address 192.168.1.8 una ble to visit the website of IP address 202.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 58 Figure 4-40 ¾ Rule Type: Select MAC for the MAC Filter rule. ¾ Active: Select “Yes” to make t he rule to take effect.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 59 Select the “MAC” as the Rule Ty pe on the Filter screen (show in Figure 4 -40 ). , Then you can configure the spec ific rule for the example.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 60 4.5.2.3 Application Filter Select Application Filter as the Filter type (shown in Figure 4-41 ), and then you c an configure the filter rules based on application. Figure 4-41 ¾ Filter Type Selection: Select the Application Filter for the next configuration.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 61 Figure 4-42 ¾ Filter Type Selection: Select the URL Filter fo r the next configuration. ¾ Active: Select “Yes” to make t he rule to take effect. ¾ URL Index: Select the index for the URL Filter entry.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 62 Other operations for the entries as show n in Figure 4-39 : Select the URL Index to view or modify the entry. Select the URL Index to locate the specific rule, and then click the DELETE button to delete the entry.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 63 Figure 4-44 ¾ UPnP: Activate or Deactivate the UPnP function. Only when the function is activa ted, can the UPnP take effect.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 64 ¾ Service Provider: This field displays the service provider of DDNS. ¾ My Host Name: Enter your host name here. ¾ E-mail Address: Enter your E-mail address here. ¾ Username & Password: Type the “User Name” and “Password” for your D DNS account.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 65 ¾ User Name/Passwo rd: Enter the User Name and Password that provided the ACS server to login the router. ¾ Periodic Inform: Activate or deactivate the function. If Activat ed, the information will be informed to ACS server periodically.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 66 4.6.2 Time Zone Choose “ Maintenance → Time Zone ”, you can configure the system time in the screen (shown in Figure 4-49 ). The system time is the time used by the device for scheduling services.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 67 Figure 4-50 3) Manually Select Manually as the Synchronize time, you need to se t the date and time corresponding to the current time. Figure 4-51 4.6.3 Firmware Choose “ Maintenance → Firmware ”, you can upgrade the firm ware of the Router in the screen (shown in Figure 4-52 ).
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 68 Figure 4-52 To upgrade the router's firmware, follow these instructions below: Step 1: Type the path and file name of t he update file into the “New Firmware Location” field. Or click the Browse button to locate the update file.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 69 Figure 4-53 Step 2: Save the file as the appointed file (shown in Figure 4-54 ). TD-W8901N Figure 4-54 To restore the Router’s settings: Step 1: Click the Browse button to locate the update file for the device, or enter the exact path in “New Romfile Location” field.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 70 4.6.4 SysRestart Choose “ Maintenance → SysR esta rt ”, you can select to restart t he device with current settings or restore to factory default settings in the screen (shown in Figure 4-55 ).
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 71 Figure 4-56 4.7 Help Choose “ Help ”, you can view the help information for configuration of any function.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 72 Figure 4-57 ) Note: Click the tab, and you will be able to get the corresponding information.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 73 Appendix A: Specifications General Standards and Protocols ANSI T1.413, ITU G.992.1, ITU G. 992.2, ITU G.992.3, ITU G.992.5, IEEE 802.11b, IEEE 802.11g, I EEE 802.11n, IEEE 802.3, IEEE 802.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 74 Appendix B: Troubleshooting T1. How do I rest ore my modem router’s configuration to its factory default settings? With the modem router powered on, press and hold the RESET button on the rear pa nel for 8 to 10 seconds before releasing it.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 75 For Windows XP z Click “ Start -> Control Panel -> Net work and Internet Connections -> Network Connections ”. z Right-click Wireless Netw ork Connection (or Local Area Connection), and then click Properties .
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 76 Click OK Select Never dial a connection Now, try to log on to the Web- based configuration page again afte r the above settings have been configured.
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide 77 Appendix C: Technical Support T echnical Support For more troubleshooting help, go to: http://www .tp-link.com/en/support/faq T o download the latest Firmware, Dr iver , Utility and User Guide, go to: http://www .
Een belangrijk punt na aankoop van elk apparaat TP-Link TD-W8901N (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen TP-Link TD-W8901N heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens TP-Link TD-W8901N vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding TP-Link TD-W8901N leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over TP-Link TD-W8901N krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van TP-Link TD-W8901N bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de TP-Link TD-W8901N kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met TP-Link TD-W8901N . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
