Gebruiksaanwijzing /service van het product TL-WA501G van de fabrikant TP-Link
Ga naar pagina of 43
User Guide TL-W A501G 54Mbps Wireless Access Point TM 2x to 3x eXtended Range 2.4GHz 802.1 1g/b.
COPYRIGHT & TRADEMARKS S pecifications are subject to change without notice. is a registered trademark of TP-LINK T echnologies Co., Lt d. Other brands and product names are trademarks or registered trademarks of their respective holders.
FCC STATEMENT This equipment has been tested and found to comp ly with the limits for a class B digital device, pursuant to part 15 of the FCC Rule s. These limits are designed to provide reasonable protection against harmful inte rference in a residential installation.
¾ EN 60950-1: 2001 ¾ EN 55022: 1998 + A1: 2000 + A2: 2003 ¾ EN61000-3-2:2001 ¾ EN61000-3-3:2001 ¾ EN 55024: 1998 +A1: 2001 + A2: 2003 European standards dictate maximum radiated transmit power of 100mW EIRP and frequency range 2.400-2. 4835GHz; In France, the equipment must be restricted to the 2.
Package contents .............................................................................................................. 1 Chapter 1: About this Guide .............................................................................................
TL-W A501G 54M Wireless Access Point User Guide Package content s The following contents should be found in your box: ¾ One TL-W A501G 54Mbp s Wireless Access Point ¾ One AC power Adapter for TL-WA5.
TL-W A501G 54M Wireless Access Point User Guide Chapter 1: About this Guide Thank you for choosing the TL-W A501G 54Mbps Wireless Access Point. This AP provides connectivity between Ether net wired networks and radio-equipped wirel ess devices.
TL-W A501G 54M Wireless Access Point User Guide Chapter 2: Introduction 2.1 Overview of the AP The TL-WA501G 54Mbps Wireless Access Point is the basic bu ilding block of a wireless LAN infrastructure.
TL-W A501G 54M Wireless Access Point User Guide 2.3 Panel Layout 2.3.1 The Front Panel Viewed from left to right, as shown in fi gure 2-1, the front panel of the TL-W A501G consists of four LEDs, whic h is designed to indicate connec tions. T able 2-1 de scribes the LEDs on the front panel of the AP .
TL-W A501G 54M Wireless Access Point User Guide Figure 2-2: Rear Panel sketch - 5 -.
TL-W A501G 54M Wireless Access Point User Guide Chapter 3: Connecting the AP 3.1 System Requirement s ¾ Broadband Internet Access Service (DSL/Cable/Et hernet) ¾ One DSL/Cable Modem t hat has an RJ45 connector ¾ A Ethernet broadband ro uter ¾ TCP/IP protocol must be inst alled on each PC ¾ Web browser , such as Microsoft Internet Explorer 5.
TL-W A501G 54M Wireless Access Point User Guide Figure 3-1 The Example of Infrastructure Network Incorporating the TL-W A501G - 7 -.
TL-W A501G 54M Wireless Access Point User Guide Chapter 4: TCP/IP Configuration After connecting the TL-W A501G AP into your network, you should configure it. The default IP address of th e TL-WA501G 54Mbp s Wireless Access Point is 192.168.1.1, and the default Subnet Mask is 255.
TL-W A501G 54M Wireless Access Point User Guide Figure 4-2: Failed result of Ping command If the result displayed is similar to that shown in figure 4-2, it means that your PC has not connected to the AP .
TL-W A501G 54M Wireless Access Point User Guide Chapter 5: Configuring the AP This chapter describes eac h web page's key functions. 5.1 login With a Web-based (Internet Explorer or Netscape ® Navigator) utility , the TL-W A501G 54Mbps Wireless Access Point is easy to configure and manage.
TL-W A501G 54M Wireless Access Point User Guide read-only . 1. Network This field displays the current settings or information for the Network, including the MAC address, IP address and Subnet Mask.
TL-W A501G 54M Wireless Access Point User Guide ¾ MAC Address - the physical address of the AP , as seen from the LAN. The value can't be changed. ¾ IP Address - Enter the IP address of your AP in dotted-decimal notation (factory default: 192.168.
TL-W A501G 54M Wireless Access Point User Guide Figure 5-6: Wireless Settings ¾ Channel - This field determines which operati ng frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point.
TL-W A501G 54M Wireless Access Point User Guide If your country or region is not listed, please contact your local government agency for assistance. ¾ Disable Wireless - The wireless of this AP can be enabled or disabled to allow wireless stations access.
TL-W A501G 54M Wireless Access Point User Guide Figure 5-7: wireless repeating 2. Verify the wireless security parameters for all access points, if any.
TL-W A501G 54M Wireless Access Point User Guide • Both use the same Channel, and security settings if security is in use. • Verify connectivity across the LAN 1 and LAN 2.
TL-W A501G 54M Wireless Access Point User Guide share files and printers with any other PCs or servers connected to any of the three LAN segments. • Wireless stations will not be able to connec t to the TL-WA501G Access Points in the illustration above.
TL-W A501G 54M Wireless Access Point User Guide • WEP Key Format - You can select ASCII or Hexadecimal format. ASCII For mat stands for any combination of keyboard characters in the specified length. Hexadecimal format stands for any combi nation of hexadecimal digits (0-9, a-f, A-F) in the specified length.
TL-W A501G 54M Wireless Access Point User Guide the Reboot checkbox. 5.4.3 MAC Filtering The Wireless MAC Filtering for wireless net works are set on this page, figure 5-1 1: Figure 5-1 1: Wireless MA.
TL-W A501G 54M Wireless Access Point User Guide To add or modify a MAC Address Filter ing entry, follow these instructions: 1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit).
TL-W A501G 54M Wireless Access Point User Guide the Privilege pull-down list and select Enabled in the Status pull-down list. Click the Save and the Return button.
TL-W A501G 54M Wireless Access Point User Guide If the numbers of connected wireless stat ions go beyond one page, click the Next button to go to the next page and click the Previous button to return the previous page. Note : This page will be refreshed autom atically every 5 seconds.
TL-W A501G 54M Wireless Access Point User Guide Address. The range of the time is 1 ~ 2880 min utes. The default value is 120 minutes. ¾ Default Gatewa y - (Optional.) Suggest to input the IP address of the LAN port of the AP, default va lue is 192.168.
TL-W A501G 54M Wireless Access Point User Guide Figure 5-18: Address Reservation ¾ MAC Address - The MAC address of the PC of which you want to reserve IP address. ¾ Assigned IP Address - The IP address of the AP reserved. To Reserve IP addresses: 1.
TL-W A501G 54M Wireless Access Point User Guide Figure5-19: AP Wireless Advanced Settings ¾ Disable short preamble - Disable short preamble and use long preamble only.
TL-W A501G 54M Wireless Access Point User Guide the AP is not experiencing difficulties, t here is n o need to download a more recen t firmware version, unless that version has a new feature that you want to use.
TL-W A501G 54M Wireless Access Point User Guide Figure 5-23: Reboot the AP Click the Reboot button to reboot the AP. Some settings of the AP will take effe ct only after rebooting, which include: • Change LAN IP Address. (Sys tem will reboot automatically) • MAC Clone (system will reboot automatically) • DHCP service function.
TL-W A501G 54M Wireless Access Point User Guide Figure 5-25: System Log The AP can keep logs of all traffic. You can query the logs to find what happened to the AP. Click the Refresh button to refresh the logs. Click the Clear Log button to clear all the logs.
TL-W A501G 54M Wireless Access Point User Guide Appendix A: F AQ 1. No lights are lit on the access point. It takes a few seconds for the power indicato r to light up. Wait a minute and check the power light status on the access point. If the access point has no power.
TL-W A501G 54M Wireless Access Point User Guide Appendix B: Configuring the PCs In this section, we’ll introduce how to inst all and configure the TCP/IP correctly in Windows 95/98. First make sure your Ethernet Adapter is working, refer to the adapter ’s manual if needed.
TL-W A501G 54M Wireless Access Point User Guide Figure B-3: Configuration tab 3) Click on Properties . The following TCP/IP Properties window will display and the IP Address tab is open on this window by default. 4) Now you have two ways to configure the TCP/IP protocol below: • Assigned by DHCP Sever a.
TL-W A501G 54M Wireless Access Point User Guide Figure B-5: Gateway tab c. Choose Disable DNS on the DNS c onfiguration tab, as shown in the following figure: Figure B-6: DNS Configuration tab • Setting IP address manually a. Select S pecify an IP address on IP Ad dress tab, as shown in the followin g figure.
TL-W A501G 54M Wireless Access Point User Guide Figure B-7: IP Address tab b. T ype the AP’s LAN IP address (the default IP is 192.168.1.1) into the Ne w gateway fiel d on the Gateway tab, and click on the Add button, as shown in the figure: Figure B-8: Gateway tab c.
TL-W A501G 54M Wireless Access Point User Guide click Add button . Shown below: Figure B-9: DNS Configuration tab Now , all the configurations are finished , it will take effect af ter reboot.
TL-W A501G 54M Wireless Access Point User Guide Appendix C: Specifications General S tandards IEEE 802.3, 802.3u, 802.1 1b and 802.1 1g Protocols TCP/IP , DHCP Ports One 10/100M Auto-Negotiati on LAN .
TL-W A501G 54M Wireless Access Point User Guide Appendix D: Glossary ¾ 2x to 3x eXtended Range TM WLAN Transmission Technology - The WLAN device with 2x to 3x eXtended Range TM WLAN transmission technol ogy make its sensitivity up to 105 dBm, which gives users the ability to ha ve robust, longer-range wireless connections.
TL-W A501G 54M Wireless Access Point User Guide ¾ WEP ( W ired E quivalent P rivacy) - A data privacy mechanism based on a 64-bit or 128-bit or 152-bit shared key algorithm, as described in the IEEE 802.11 standard. ¾ Wi-Fi - A trade name for the 802.
TL-W A501G 54M Wireless Access Point User Guide Appendix E: Cont act Information For help with the installation or operation of the TP-LINK TL-W A501G 54 Mbps Wireless Access Point, please contact us. E-mail: support@tp-link.com Website: http://www.tp-link.
Een belangrijk punt na aankoop van elk apparaat TP-Link TL-WA501G (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen TP-Link TL-WA501G heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens TP-Link TL-WA501G vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding TP-Link TL-WA501G leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over TP-Link TL-WA501G krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van TP-Link TL-WA501G bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de TP-Link TL-WA501G kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met TP-Link TL-WA501G . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.