Gebruiksaanwijzing /service van het product TBD913 van de fabrikant Tricity Bendix
Ga naar pagina of 36
34 MODEL NO. TBD913 OPERATING AND INSTALLATION INSTRUCTIONS.
MODEL NO. TBD 913 Voltage: 230/240 Volts AC 50Hz Wattage: 4.5/4.9 kW Height: 897mm Width: 592mm Depth: 563mm (excluding handles and knobs) Weight: 53kg This appliance complies with: European Council Directive 73/23/EEC. EMC Directive 89/336/EEC. CE Marking Directive 93/68/EEC.
Please follow these instructions step by step to install and operate your oven safely and easily . Technical Details ..................................... ........................ .......... 2 Contents ..................................... ...........
The Top Oven ..................................... .................................... 21 Uses of the Top Oven ..................................... ....................... 2 1 Selecting the Top Oven ..................................... ............
THESE WARNINGS ARE PROVIDED IN THE INTERESTS OF YOUR SAFETY. ENSURE THAT YOU UNDERSTAND THEM ALL BEFORE INSTALLING OR USING THE APPLIANCE. PLEASE READ CAREFULLY BEFORE INSTALLATION This appliance is heavy and care must be taken when moving it.
Ensure that you support the grill pan when it is in the withdrawn or partially withdrawn position. Ensure that all vents are left unobstructed to ensure ventilation of the oven. You must ensure that the grill control is in the 'OFF' position when the timer control has been set for automatic cooking.
THINGS YOU NEED TO KNOW WARNINGS: This appliance must be installed by a qualified electrician/competent person. Safety may be impaired if installation is not carried out in accordance with these instructions. This appliance must be earthed. Do not remove the screws from the earth tab extending from the oven mains terminal block (Fig.
RECOMMENDED CABINET DIMENSIONS (IN MILLIMETRES) Fig.2 Built In Installation Cross section through cabinet showing oven positioned 542 897 872 907 min See Below 300 min 8.
HOW TO FINISH UNPACKING Place packed appliance next to the cabinet in which it will be installed. Remove the appliance packing except for bottom tray which should be left in position until the appliance is ready to be fitted into its cabinet. NOTE: It is imperative that the appliance is left in the base to protect both the appliance and the floor.
Lift cover and remove screw from cable clamp. See Fig. 5. CONNECTING TO MAINS TERMINAL Warning: This appliance must be earthed. Make connection as shown in Fig. 6 by proceeding as follows:- Preform wires to the appropriate shape to suit fitting into the mains terminal block.
FITTING INTO THE CABINET IMPORTANT: Ensure that the oven is switched off at the wall before any further work is carried out. Using a tape measure establish the internal width of the cabinet. Refer to page 7 if greater than 565mm. Position the appliance in front of the cabinet.
GETTING TO KNOW YOUR OVEN A - Oven Programmer Timer E - Function Control B - Main Oven Indicator Neon F - Top Oven Temperature Control C - Main Oven Temperature Control D - Top Oven Indicator Neon INT.
RATING PLATE This is situated on the lower front frame of the appliance upon opening the main cavity door. Alternatively the rating plate may also be found on the back or top of some models (where applicable). The appliance must be protected by a suitably rated fuse or circuit breaker.
GRILL AND OVEN FURNITURE The following items of grill and oven furniture have been supplied with the appliance. If you require replacements of any of the items listed below please contact your local Service Force Centre, quoting the relevant part number.
The Electronic Timer KEY A Minute Minder Button B Cooking Hours Button C Stop Time Button D Manual Selector Button E Decrease/Increase Control F Key Symbol G Cooking Symbol H Bell Symbol I Auto Symbol NOTE: The time of day must be set before the oven will operate manually.
Release the minute minder button and the display will return to the time of day after 5 seconds. Whilst the minute minder is set the bell symbol ( ) is displayed. During the operation of the minute minder, the remaining time period can be shown in the display by pressing the minute minder button ( ) as Fig.
B) To Set The Timer To Switch Off Only i) Ensure the electricity supply is switched ON and that the correct time of day is displayed, e.g. 10.00am as Fig.
5. To Cancel An Automatic Programme A programme may be cancelled by returning the cooking hours to zero. Press the cooking hours button ( ) then turn ( - ) button until 0.00 is displayed as Fig. 14. The AUTO symbol will now flash and acts as a reminder to reset the appliance to manual.
Select the grill function for full grill Select the grill function for centre section only Turn the temperature control knob to the right as far as it will go. This is the hottest setting. To use the grill at lower settings, turn the temperature control knob so that 120°C or 150°C on the knob lines up with the off dot on the panel.
HINTS AND TIPS In order to become acquainted with the performance of the Dual Grill it is advisable to check food regularly when grilling. Food should be thoroughly dried before grilling to minimise splashing. Brush lean meats and fish lightly with a little oil or melted butter to keep them moist during cooking.
Turn the top oven function selector to Turn the temperature control to the required setting . THINGS TO NOTE 1. The top oven indicator neon will glow until the oven has reached the desired temperature and then go out. It will turn ON and OFF periodically during cooking showing that the temperature is being maintained.
HINTS AND TIPS There should always be at least 2.5cm (1") between the top of the food and the element. This gives best cooking results and allows room for rise in yeast mixtures, Yorkshire puddings etc. When cooking cakes, pastry, scones, bread etc.
Turn the main fan oven temperature control to the required setting. THINGS TO NOTE 1) The main oven indicator neon will glow until the oven has reached the desired temperature and then go out. It will turn ON and OFF periodically during cooking showing that the temperature is being maintained.
HINTS AND TIPS Arrange the shelves in the required positions before switching the oven ON. Shelves are numbered from the bottom upwards. When cooking more than one dish in the fan oven, place dishes c.
The oven temperatures are intended as a guide only. It may be necessary to increase or decrease the temperatures by 10°C to suit individual preferences and requirements.
ROASTING CHART INTERNAL TEMPERATURES - Rare : 50-60°C; Medium : 60-70°C; Well done :70-80°C MEAT TOP / FAN OVEN COOKING TIME Beef 160-180°C 20-35 min per ½kg/1lb and 20-35 min over Beef, boned 16.
USES OF DEFROST FEATURE This main oven function defrosts most foods faster than more conventional methods. It is particularly suitable for delicate frozen foods which are to be served cold, e.g. cream filled gateaux, cakes covered with icings or frostings, cheesecakes, biscuits, scones, etc.
Care must be taken when handling foods in the home. Always follow the basic rules of food hygiene to prevent bacterial and microbial growth and cross contamination when preparing, reheating, cooking, cooling, defrosting and freezing foods:- 1. Always ensure food you purchase is of good quality and in prime condition.
BEFORE CLEANING ALWAYS ALLOW THE COOLING FAN TO COOL THE APPLIANCE DOWN BEFORE SWITCHING OFF AT THE ELECTRICITY SUPPLY CLEANING MATERIALS Before using any cleaning materials on your appliance, check that they are suitable and that their use is recommended by the manufacturer.
CLEANING BETWEEN THE OUTER AND INNER DOOR GLASS The outer door glass is removable for cleaning. TO REMOVE THE OUTER GLASS 1. Open the oven door slightly to gain access to the two cross head screws on the top of the oven door. 2. Loosen the two screws using a Pozidrive screwdriver.
REPLACING THE OVEN LIGHT BULB The type of bulb required is a 300°C 25 watt small Edison Screw. Part number 572 491 5431-00/1. (Available through Service Force Centres). CAUTION: DISCONNECT THE APPLIANCE FROM THE ELECTRICITY SUPPLY BEFORE REPLACING THE BULB.
Before calling an Engineer please carry out the following checks, you may be able to solve the problem without the expense of an Engineer. If our Service Engineer finds that the problem is listed below you will be charged for the call whether or not the appliance is under guarantee.
In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning:- 0870 5 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area.
Standard guarantee conditions We, Tricity Bendix, undertake that if within 12 months of the date of the purchase this Tricity Bendix appliance or any part thereof is proved to be defective by reason o.
35 N O T E S.
IMPORTANT NOTICE In line with our continuing policy of research and development, we reserve the right to alter models and specifications without prior notice. This instruction booklet is accurate at the date of printing, but will be superseded if specifications or appearance are changed.
Een belangrijk punt na aankoop van elk apparaat Tricity Bendix TBD913 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Tricity Bendix TBD913 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Tricity Bendix TBD913 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Tricity Bendix TBD913 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Tricity Bendix TBD913 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Tricity Bendix TBD913 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Tricity Bendix TBD913 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Tricity Bendix TBD913 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
