Gebruiksaanwijzing /service van het product DRM-2001G van de fabrikant TVGuardian
Ga naar pagina of 48
DVD Recorder with 80GB Hard Drive DRM-2001G 20060425 User ’ s Manual.
Safety Instructions W ARNING : T o prevent fi re or electric shock, do not expose the unit to rain or moisture. Never attempt to open the cabinet; dangerous high voltages are presented in the unit. Refer servicing to quali fi ed service personnel when necessary .
T able of Contents Identi fi cation of Controls 4 Remote Control 5 System Connections 7 System Setup 10 TVGuardian® Feature 19 Recording Mode 20 Creating a Y esDVD™ 23 T imer Recording 24 Play Mod.
Identi fi cation of Controls 4 F RONT P ANEL R EAR P ANEL 1. Power button 2. Standby LED 3. IR (Remote Sensor) 4. DVD Door 5. Display 6. Open/Close button 7. Source button 8. Play button 9. Stop button 10. Record button 1 1. Digital video input 12. Audio input (front left) 13.
Remote Control 5 1. EJECT button 2. DV button 3. HDD button 4. NUMBERS (0-9) buttons 5. SETUP/EXIT button 6. LEFT DIRECTION/REPLA Y button RIGHT DIRECTION/SKIP button (UP/DOWN/LEFT/RIGHT) 7. OK button 8. TIMER button 9. TIME SHIFT button 10. REC/OTR button (RECORD/ONE-TOUCH RECORD) 1 1.
Remote Control 6 T o install batteries and use remote control: Notes: Do not drop the remote control or leave it in places with high humidity . Do not leave the IR remote sensor exposed to direct sunlight or bright light. Do not mix old and new batteries should they need replacing.
System Connections 7 C ONNECT TO A TV Before connecting the system, be sure to turn off the power source of this unit and other devices. There are three kinds of video outputs in this unit: component video, S-video, and composite video. Y ou can select one of the available video inputs of the TV and make the connection.
System Connections 8 C ONNECTING TO 5.1 C HANNEL A MPLIFIER C ONNECTING TO AN A MPLIFIER WITH D IGIT AL D ECODER In audio setup, set the “Digital Output Mode” to “LPCM Output” (For details, see “System Setup: Digital Audio Output” section.
System Connections 9 C ONNECTION FOR R ECORDING E XTERNAL S IGNALS ( FRONT PA N E L SIGNAL ) Before connecting with external signals be sure to turn off the power source of this unit and other devices. Notes: Refer to your user ’s manual when connecting the unit.
System Setup 10 Operation Interface and General Steps This section will introduce the menu interface of the System Setup and general operation steps. • Press the “SETUP” button to enter the System Setup mode. The system setup control bar menu will appear on the top of the OSD, as shown in the following chart.
System Setup 11 Recording Quality 1. In the Recording Settings menu, use the ▲ or ▼ button to select the “Default Quality” item, and press the “OK” button to drop down a menu. 2. Use the ▲ or ▼ button to select a desired value and press the “OK” button.
System Setup 12 Modify Channel Use the ▲ or ▼ button to Select the “Modify Channel” item, in dialog chart select “OK”. If you want to edit channels for the received TV programs, select the.
System Setup 13 TV Display 1. In the Play Settings menu, press the “OK” button to select the “TV aspect ratio” item and a drop down menu will appear . 2. Use the ▲ or ▼ button to select a proper setting value and press the “OK” button to con fi rm.
System Setup 14 Y esDVD 1. In the General Settings menu, use the ▲ or ▼ button to move the cursor , select the “Y esDVD” item and press the “OK” button. 2. When you want to create a “Y esDVD disc” select “ON”. If not, select the “OFF”.
System Setup 15 SETUP MENU-LANGUAGE T o satisfy the needs of consumers in different regions, the unit provides various interfaces languages. 1. Enter the system setup mode.
System Setup 16 SETUP MENU-DA TE/TIME Date-Time Setting The time and date have to be set before a timed recording can be set. There are two ways to set the product clock: AUTO setting and MANUAL setting. 1. Press the “INPUT” button on the remote control to display the SYSTEM SET -UP MENU.
System Setup 17 SETUP MENU-PREFERENCES Reset to Factory Default When your unit doesn’t work properly , it is possibly due to some wrong settings. Please try the “Reset to Factory Default” function to see if the unit can restore to its normal working status.
System Setup 18 SETUP MENU-TIME SHIFT Time shift default source: T uner (ON): When the system is turned on, it will enter the tuner and time shift on state automatically .
TVGuardian® Feature 19 This product supports TVGuardian Foul Language F iltering T echnology , o ering your family the v er y best control of objectionable language in your home. H OW IT WOR KS : T VGuardian® ( T VG) lters out objectionable language by monitoring the closed-captioned (CC) information.
Recording Mode 20 Recording modes: • There are various external signal inputs in the unit, including S-Video, composite video, TV tuning, DV input and stereo audio input. Y ou can select any group of audio and video signals from these inputs for recording.
Recording Mode 21 Recording Quality: Y ou can select from up to six record quality settings to de fi ne the picture quality of the recordings and the amount of space you want to use on the DVD/HDD. Higher quality recordings will consume more space and low quality recordings will consume less space on the DVD/HDD.
Recording Mode 22 Record from hard drive to optical disc Press the “HDD” button and enter into the HDD display state. Press the “ADD/CLEAR” button to select the fi ve titles you desire to copy to DVD. Press the “REC” key to copy selected fi le to DVD.
Instructions for Creating a Y esDVD™ 23 W HAT IS Y esDVD™ Y esDVD™ is a product of Y esVideo (ww w .yesvideo .com) that allow s you to transfer y our videotapes or other video content to a DVD+R/RW with the professional quality f eatures found in Hollywood DVDs.
T imer Recording 24 Y ou can set-up the unit to schedule recordings to begin and end at a speci fi c time. Y ou can record to the hard drive or directly to a DVD. This feature is useful if you know the speci fi c quality , time, date, and channel of a program you want to record in advance.
T imer Recording 25 Setting up the starting time of recording: In the “Item Editor” dialog box, use the arrow buttons and the “OK” button to highlight the “Start” option. Enter a value between 0:00 and 23:59 with the number buttons and press the “OK” button to con fi rm.
Play Mode 26 Menu Description In the Play Mode, the system control is done through the menu operations or function keys. 1. Enter the Play Mode. 2. Press the “DISPLA Y” button to show or hide the control bar menu. The following charts are control bar menus for DVD, VCD, CD and MPEG 4 respectively .
Play Mode 27 OPERA TION Auto Play - Pre-Recorded Discs 1. Press the “EJECT” button to open the disc tray . 2. Insert the available disc. • Do not put the disc upside-down. The smooth side should face downward, while the printed side should face upward.
Play Mode 28 Play Mode Control • There are four playing modes for the unit: Normal Play , Repeat Play , Program Play and Random Play . • The operations are as follows. Normal Play 1. Press the “DISPLA Y” button to enter the menu. 2. Press the ▲ or ▼ and “OK” buttons to select the fi rst item in the menu, Play Mode.
Play Mode 29 Random Play • Set the value of the menu control item as “Random”. The system will start Random Play . • In this mode, the system will randomly play the chapters or tracks of the disc. PLA YBACK CONTROL Menu Operation Most of the play process control operations can be done through the menu.
Play Mode 30 SELECTION PLA Y MODE Title Selection This section only applies to DVD discs. 1. Enter the play control bar menu. 2. Press the ▲ or ▼ button to select the “T itle” item. 3. Press the “OK” button to enter the input mode. 4. Press the number buttons to enter the T itle Number to be selected.
Play Mode 31 “GOTO” Button In the playing status, press the “GOTO” button to cycle through various options in the play control bar menu. With the above-mentioned operations, you can use the remote control to enter the corresponding value and skip to the corresponding location directly .
Play Mode 32 Subtitle Selection Some DVD discs may have more than one kind of subtitle. Y ou can select one of them as the output. 1. In the play control bar menu, select the “Subtitle” item.
Hard Disc Drive Play Mode 33 Hard Disc Drive Playback • Press the remote control Hard Disc Drive (HDD) button or in the NA VIGA TION mode, switch to HDD/Playback state. • During HDD playback, the following remote control keys are valid: K EY R ESUL T N OTE Play Play (resume) Follows pause Pause Pause/Stop Stop Stop Will return to title list.
Hard Disc Drive Play Mode 34 Time Shifting When the unit is turned on or you press the “TIME SHIFT” button from other menus, the last viewed TV channel will be tuned in. T o LIVE record: 1. Press the “T ime Shift” button. 2. Press “REC” T o watch recorded broadcast: 1.
Hard Disc Drive Play Mode 35 Y ou can navigate in T ime Shifting mode and control the audio by using the following remote control keys: K EY R ESUL T N OTE CH +/- Change the channel By default, changing the channel will erase all T ime Shifting required for the current channel.
Hard Disc Drive Play Mode 36 While in T ime shifting mode, you can use the following keys for other operations: K EY R ESUL T N OTE HDD HDD title list Recording continues DVD Play disc Recording conti.
Disc Operation 37 The Disc Operation means operations done to recordable discs in the drive, including browsing disc information, fi nalizing a disc, removing disc content, deleting the last title, setting compatibility and write protection, etc. Entering the Disc Operation Mode: 1.
Disc Operation 38 Record a New Title: 1. In the Disc Operation menu, use the ▲ or ▼ button to select the “Record a New T itle” item and press the “OK” button. The system will change to TV status. 2. Press the “INPUT” button to switch to other input sources.
Hard Disc Drive Editing 39 Editing from the Hard Drive: • Five operations are possible: Play , Delete, Split, Segment, Change Index Picture and Rename. • When you edit a title, its corresponding representation on the HDD title list will bear the edit icon to remind you.
Hard Disc Drive Editing 40 Segment This option brings up the Segment screen. Y ou can navigate the program (similar to Playback screen) and mark a location for the beginning of a segment followed by a location for the end of a segment. When you enter the Segment screen, the title will automatically start playing.
Hard Disc Drive Editing 41 Rename This option brings up the on-screen keyboard. Y ou can type in the title. Use the arrows to highlight the desired key .
T itle Editing 42 Editing Titles: 1. Enter the T itle Editing Mode 2. In the T itle Display mode, press the ► button to pop up the following dialog box. 1. T itle Name 2. Recording Date 3. Starting T ime of the Recording 4. The Length of the Recording 5.
Chapter Editing 43 Menu Description: The chapter editing control bar menu is as shown on the right and the meanings for each item are as follows: 1. T itle: The number on the left under the icon is the current title to be edited; the right is the total number of the titles in the disc.
Chapter Editing 44 Splitting the title: 1. In the Editing Mode control bar menu, use the ▲ or ▼ buttons to split the title and press the “OK” button. 2. When playing to a certain position, press the “OK” button, and the system begins to split the current chapter .
T roubleshooting Guide 45 Before c ontacting ser vice personnel, please check possible problems and solutions belo w : S YMPTOM P OSSIBLE C AUSE R EMEDY No power Power supply disc onnected Bad connection between power plug and receptacle Po wer of receptacle swit ched o 1.
T echnical Speci fi cations 46 Supported disc formats DVD , DVD+R/RW , DVD-R/R W , SVCD , VCD , JPEG, MPEG4 Supported recordable disc functions DVD+R/RW , DVD-R/R W Recording f ormat DVD , MPEG-II Re.
Glossary of T erms 47 TERM DEFINITION Chapter Chapter ref ers to the subtitle of each title of division on the DVD image or music. Normally , one title c ontains several chapters.
Glossary of T erms 48 TERM DEFINITION Region code In order to prot ec t intellectual propert y , the r elevant organization has divided the world int o 6 regions.
Een belangrijk punt na aankoop van elk apparaat TVGuardian DRM-2001G (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen TVGuardian DRM-2001G heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens TVGuardian DRM-2001G vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding TVGuardian DRM-2001G leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over TVGuardian DRM-2001G krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van TVGuardian DRM-2001G bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de TVGuardian DRM-2001G kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met TVGuardian DRM-2001G . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
