Gebruiksaanwijzing /service van het product BM2-TI van de fabrikant Ubiquiti Networks
Ga naar pagina of 24
Zero-V ariable Outdoor Radio Models: BM2-Ti, BM5-Ti.
Introduction Thank you for purchasing the Ubiquiti Netw orks ™ airMAX ™ Bullet ™ Titanium. This Quick Start Guide is designed to guide you through the installation of the radio . This Quick Star t Guide also includes the warranty terms and is for use with the BulletM2 Titanium, model BM2-Ti, and the BulletM5Titanium, model BM5-Ti.
Hardware Overview N-Type Connector Bullet Titanium Radio Rubber Washer Cable Gland Body Compression Nut Ethernet Port Compression Seal.
Hardware Installation 1. Unscrew the Cable Gland Body and detach it from the Bullet Titanium Radio. 2. Unscrew the Compression Nut and remove the C ompression Seal from the Cable Gland Body.
3. Slide the Compression Nut over the Ethernet cable with the threaded end facing the RJ-45 connector . Slip the Compression Seal around the cable. 4. Feed the Ethernet cable thr ough the Cable Gland Body and seat the Compression Seal into the Cable Gland Body .
6. Securely screw the Cable Gland Body into the Bullet Titanium Radio so that the Rubber Washer seals the bottom of the radio. 7. Tightly screw on the Compression Nut. Ensure the Compression Seal is securely compressed and tightly sealed around the cable.
8. Connect the Bullet Titanium to the N-T ype connec tor of the antenna. Note: The Bullet Titanium should be mounted vertically to reduce stress on the N-T ype Connector.
Connecting Po wer over Ethernet 1. Connect the other end of the Ethernet cable from the Bullet Titanium to the Ethernet port labeled POE on the PoE Adapter . 2. Connect an Ethernet cable from your LAN to the Ethernet port labeled LAN on the PoE Adapter.
Accessing the airOS Utility 1. Make sure that your host machine is connected to the LAN that is connected to the Bullet Titanium. 2. Configure the Ethernet adapter on your host syst em with a static IP address on the 192.168.1.x subnet. 3. Launch your web browser .
Installer Compliance Responsibility Devices must be professionally installed and it is the professional installer’ s responsibility to make sure the device is operated within local country regulatory requirements.
Specifications Bullet Titanium Processor Atheros MIPS 24KC, 400 MHz Memory 32 MB SDRAM, 8 MB Flash Networking Interface (1) 10/100 Ethernet Port Dimensions 190 x 46 mm Weight 196 g Enclosure Powder C .
Safety Notices 1. Read, follow , and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer . W ARNING: Do not use this product in location that can be submerged by water . W ARNING: Avoid using this product during an electrical storm.
Limited W arranty UBIQUITI NETWORKS, Inc (“UBIQUITI NET WORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation.
Returns No Products will be accepted for replacement or r epair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being receiv ed at UBIQUITI NETWORKS’ facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS.
Limitation of Liability EXCEPT T O THE EXTENT PROHIBITED BY LOCAL LA W, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIA TES OR SUPPLIERS BE LIABLE FOR DIRECT , SPECIAL, INCIDENTAL, C ONSEQUENTI.
Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment. This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions: 1.
Industry Canada This Class A digital apparatus complies with Canadian ICES-003. T o reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r .p.) is not more than that permitted for succ essful communication.
Cet appareil numérique de la classe A est confrome à la norme NMB-003 Canada. Pour réduire le risque d’interférence aux autres utilisateurs, le type d’antenne et son gain doivent être choisies de façon que la puissance isotrope rayonnée équivalent e (PIRE) ne dépasse pas ce qui est nécessaire pour une communication réussie.
RF Exposure W arning The antennas used for this transmitter must be installed to pro vide a separation distance of at least 2.52 m from all persons and must not be located or operating in conjunction with any other antenna or transmitter .
RoHS/WEEE Compliance Statement English European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams.
Español La Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
Declaration of Conformity Česky [Czech] UBIQUITI NET WORKS tímto prohla uje, e tent o UBIQUITI NE TWORKS device, je ve shod se základními po adavky a dal ími p íslu n mi ustanoveními sm rnice 1999/5/ES.
Italiano [Italian] Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NET WORKS device, è conforme ai requisiti essenziali ed alle altr e disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
P051713—720-00034-01 www .ubnt.com © 2011-2013 Ubiquiti Networks, Inc. All rights reserved..
Een belangrijk punt na aankoop van elk apparaat Ubiquiti Networks BM2-TI (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Ubiquiti Networks BM2-TI heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Ubiquiti Networks BM2-TI vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Ubiquiti Networks BM2-TI leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Ubiquiti Networks BM2-TI krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Ubiquiti Networks BM2-TI bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Ubiquiti Networks BM2-TI kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Ubiquiti Networks BM2-TI . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
