Gebruiksaanwijzing /service van het product LRD 6199SWS van de fabrikant Uniden
Ga naar pagina of 25
Introduction Welcome to the world of sophisticated, early warning laser/radar detection. You have purchased one of the most advanced laser/radar detectors available.
Speed Detection Systems A speed detection device (often called a radar gun) sends out either a microwave signal or beam of light. When this signal reaches its target, part of the signal is reflected or bounced back toward the emitting gun.
Laser The Laser Speed Detection System, also called LIDAR (for Light D etection and Ranging), uses a laser gun that emits infrared light pulses just outside the spectrum of visible light. Each reflected pulse measures the speed of the object coming toward or going away from the laser gun.
Included with Your Radar Detector If any of these items are missing or damaged, contact your dealer immediately. Be sure to complete and mail the Product Registration Card.
Controls and Functions 1. Clip Release — Press the clip release button to remove the LRD 6199SWS from the windshield mounting clip. 2. Rear and Side Laser Detector Lenses — For rear and side detection of laser signals. 3. City Button — Press the CITY button to help reduce X-band false alarms while driving in the city.
6. DC 12V Power Input — Connect the DC power cord here. Note: Use on a Uniden® supplied power cord or its replacement. 7. LED Display — LEDs display visual alerts, signal strength, and operation mode. 8. On-Off/Volume Control — Turns the power on and adjusts the Audio Alert volume.
1. X-Band Signal Indicator — A green LED lights and blinks to indicate the presence of an X-band radar signal. The blink rate increases as the radar source gets closer. A distinct audio alert is also heard. 2. K-Band Indicator — An amber (orange) LED lights and blinks to indicate the presence of a K-band radar.
Installation The LRD 6199SWS uses a highly sensitive horn-type antenna and IR laser sensor to receive radar/laser signals. Its sensitivity and range depend on the method of installation and the direction of the antenna/sensor in relation to the signal source.
Adjusting the Windshield Mounting Clip 1. The metal portion of the bracket locks into the plastic portion at three different positions. These positions can be used for vehicles with different vertical angles of their windshields. The back position can be used for vehicles with windshields that are slanted back.
Connecting the Power The LRD6199SWS is designed to operate on most 12 VDC negative ground vehicle electrical systems. The power cord provided with the unit has a cigarette lighter socket plug at one end and a small connector at the other. 1. Insert the small connector into the jack on the side of the unit.
Replacing the Fuse The cigarette lighter plug contains a 1-ampere fuse to protect it from power surges. 1. To replace the fuse, unscrew the top of the plug. 2. Remove the fuse and replace it with the same type. 3. To replace the top, push in the two metal contacts and twist into place.
Operation You are now ready to enjoy the convenience and security of your LRD 6199SWS. Please read this section of the Operating Guide carefully to familiarize yourself with the basic operation of this unit. Power On Turn the Volume control to switch on the power.
Full Warning When the LRD 6199SWS detects a radar, laser, or safety warning signal, it emits a distinct warning tone and the corresponding alert LEDs (X, K, Ka, L, or SWS) will light and blink. The blink rate of the LEDs increases and the signal strength meter LEDs light successively as the signal source comes closer.
Visual Alert Only Operation You can operate the LRD 6199SWS in Visual Alert Only by setting the Volume control at the minimum position in Full Alert Mode. At this setting you can barely hear the audio alert in a quiet environment. Be sure that the Audio Alert Only indicator is off.
City Operation In highly populated areas, you may encounter many devices that use the same frequencies as radar signals, such as motion detectors, automatic doors, and intrusion alarms.
LED Signal Strength Meter in City Mode The LED signal strength meter gives you instant information about the strength of the signal being detected. A weak signal causes the first LED to light, but as signal strength increases, more LEDs light. All four LEDs light when full signal strength is received.
Care and Maintenance The LRD 6199SWS is designed to give you years of trouble-free service. There are no user-serviceable parts inside, and, except for the fuse, no maintenance is required. To keep your detector in new condition, follow these important suggestions: • Never leave the LRD 6199SWS on the windshield when you park your vehicle.
Troubleshooting If your LRD 6199SWS does not perform up to expectations, try the suggestions listed below. If you cannot get satisfactory results, call the Uniden Customer Service Center at (800) 297-1023, 8:00 a.m. to 5:00 p.m. Central Time, Monday through Friday.
Specifications General Dimensions: 3 in. (W) x 4 in. (D) x in. (H) Weight: 3.5 oz. Power Requirements: 13.8 VDC Temperature Range: Operating: -5°F to 160°F (-20°C to 70°C) Storage: -40°F to 185°.
Optional Accessories & Replacement Parts 20 Laser/Radar Detector Operating Guide Owner’s Guide Windshield Clip njdfjnjnjfnjfjn jnkjnjksnkjsnfj dfksfmkm kfmkmkmlf sfkkmmfmsmsm kkoioionksnkln mmkm.
LRD 6199SWS Operating Guide USZZ01063ZB ® CITY AUDIO MUTE.
Precautions Important: The LRD 6199SWS was not designed to help you disobey the law. Safe drivers always obey the posted speed limit and legal driving methods at all times. Federal and Local Regulations The FCC passed the Communications Act in 1934 to give all citizens the right to receive any type of radio transmission.
Features, Specifications, and availability of Optional Accessories are all subject to change without notice. Uniden ® is a registered trademark of Uniden America Corporation. Contents Introduction ...............................................1 Feature Highlights .
One Year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one.
Covered under one or more of the following U.S. patents: 4,622,553 4,698,632 4,709,407 4,791,420 4,831,498 5,315,302 ©1996 Uniden America Corporation.
Een belangrijk punt na aankoop van elk apparaat Uniden LRD 6199SWS (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Uniden LRD 6199SWS heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Uniden LRD 6199SWS vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Uniden LRD 6199SWS leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Uniden LRD 6199SWS krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Uniden LRD 6199SWS bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Uniden LRD 6199SWS kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Uniden LRD 6199SWS . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
