Gebruiksaanwijzing /service van het product MS146I van de fabrikant Unitech
Ga naar pagina of 41
MS146 Bar Code Slot Reader Rev.A.
AdventureJan.
Improper handling, storage, environmental influences and /or product modification can lead to problems during use. This is particularly true if rep airs and maintenance work are not performed by trained personnel. We reserve the right to make technical modifications in accor- dance with technological advancements as they occur .
T ABLE OF CONTENTS SPECIFICA TIONS 30 . . . . . . . . . . . . . . . . . TROUBLESHOOTING . . . . . . . . . . . . . . . . 32 W ARRANTY 35 . . . . . . . . . . . . . . . . . . . BAR CODE TEST CHAR T 36 . . . . . . . . . . . . . . SCANNER CONFIGURA TION MANAGER 3 .
MS146 Manual 1 INTRODUCTION The MS146 is a family of bar code slot readers specifically designed for reading ID, membershop, or other types of cards that contain bar codes.
MS146 Manual 2 MS146-3PS2 and MS146I-3PS2 The PS/2 Keyboard Wedge interface is the most popular and straightfor- ward. The MS146-3PS2 has a “Y” interface cable with a PS/2 male plug on one end and a PS/2 female plug on the other .
3 MS1 46 Man ual The above icons, from left to right, represent download settings (from computer to scanner), and upload settings (from scanner to computer). The third icon opens a T est Pad where you can view the actual scanner output. Scanner Configuration Manager software is the simplest and most foolproof way to configure your scanner settings.
MS1 46 Manual 4 The above four icons are used in the “Data Editing” feature of SCM. From left to right they are the “Add a Formula” icon, the “Remove a Formula” icon, and the right-hand two are the “Move Formula” icons that move selected formulas up or down in relation to each other .
5 MS1 46 Man ual The screen to the left appears. Click on any of the selections under “Current Settings” to view its “Attributes”. Click the upload icon (see page 3 ) and the following pop-up .
6 MS1 46 Man ual Beep T one Select a value from “None” to “High” to set the loudness of the tone, or select “Low to High” or “High to Low” to set the characteristic of the tone. Default is “Medium”. Intercharacter Delay Intercharacter Delay is the time duration between data characters sent from the scanner to the computer .
7 MS1 46 Man ual Keyboard Wedge Y our Unitech keyboard contains a built in data decoder or “wedge” that translates raw bar code input into Keyboard Scan Code, with the result that bar code data exit s the scanner as if you had typed the text.
8 MS1 46 Man ual Keyboard Wedge, continued Use Numeric Keypad The ASCII code for numeric input from the keypad part of the keyboard is different from that of the upper row of the keyboard proper .
9 MS1 46 Man ual Baud Rate Baud Rate (bits per second) refers to the speed of the data through the RS232 port. If the data error rate is unaccept ably high, setting the baud rate lower should help.
10 MS1 46 Man ual Dat a Direction Three options are available for data direction: “Send to Host”, “Send to Host & T erminal”, and “Send to T erminal”. Default is “Send to Host”. Time Out The ACK/NAK function (see page 9 ) can be given a limited (ranging from 1 second to 10 seconds) or unlimited amount of time to operate.
11 MS1 46 Man ual T erminator The T erminator is a command that follows the input of bar code data. Four dif ferent terminators can be selected here: “Enter”, “Return (on numeric keypad)”, “Field Exit or Right Control”, or “None”. Alternative terminators (such as T ab) can be be configured via the Postamble function (see page 1 3 ).
1 2 MS1 46 Man ual Aim Function for Long Range Engine The Aim Function causes a laser scanner to output a “pin-point” aiming aid for a specified period of time (see below) to enable the user to more easily scan distant bar code labels. This function can be toggled on or off.
1 3 MS1 46 Man ual Aiming Time for Long Range Engine The Aiming T ime function specifies the duration of the Aim Function (see previous page). Length of duration can be specified from 500ms to 2 seconds, in half-second increments. Default is “1 second”.
14 MS146 Man ual Bar Code Symbologies Modify the output characteristics of 16 of the most popular bar code symbologies in current use. Following are the bar code symbolo- gies and their modifiable parameters. Code 39 Maximum Length defines the maximum length the user will accept for a valid bar code.
15 MS146 Man ual Bar Code Symbologies, continued St andard 2 of 5 / T oshiba Code (China Postal Code) Maximum Length defines the maximum length the user will accept for a valid bar code. Default is “48”. • Minimum Length defines the minimum length the user will accept for a valid bar code.
16 MS146 Man ual Bar Code Symbologies, continued Code 128 Enabled toggles the ability for the keyboard/scanner to read Code 128 on or off. Default is “Y es”. • Code ID is a user-definable identification letter for Code 128, which is referred to in the “Use Code ID” function (see page 11 ).
17 MS146 Man ual Bar Code Symbologies, continued Code 93 Enabled toggles the ability for the keyboard/scanner to read Code 93 on or off. Default is “Y es”. • Code ID is a user-definable identification letter for Code 93, which is referred to in the “Use Code ID” function (see page 11 ).
18 MS146 Man ual Bar Code Symbologies, continued UPC-A Send Check Digit toggles whether or not to send a check digit. Default is “Send”. • Send Leading Digit toggles sending or not sending a leading (“start bar code”) digit. Default is “Send”.
19 MS146 Man ual Bar Code Symbologies, continued EAN-8 Send Check Digit toggles whether or not to send a check digit. Default is “Send”. • Send Leading Digit toggles sending or not sending a leading (“start bar code”) digit. Default is “Send”.
2 0 MS146 Man ual Bar Code Symbologies, continued Code 1 1 Maximum Length defines the maximum length the user will accept for a valid bar code. Default is “48”. • Minimum Length defines the minimum length the user will accept for a valid bar code.
2 1 MS146 Man ual Bar Code Symbologies, continued Label Code IV and V • Enabled toggles the ability for the keyboard/scanner to read Label Code IV and V on or off. Default is “No”. Send Check Digit toggles whether or not to send a check digit. Default is “Send”.
2 2 MS146 Man ual Dat a Editing Qualifier The Qualifier section defines the conditions that must be present for the bar code to be modified, such as what type of bar code it must be (Code 39, EAN-13, etc.), what length the bar code must be, or what characters (defined by a match string) the bar code must contain.
2 3 MS146 Man ual Dat a Editing, continued Delete deletes existing modifier strings. Move Up / Move Down moves the modifiers up and down in relation to each other . The top modifier will be performed first and each one down the list will be performed in se- quence.
24 MS146 Man ual Dat a Editing, continued The “Everything Else” Formula If a formula is entered into the Data Editing area, then all scanned bar codes will be evaluated according to this formula. If the scanned bar code does not satisfy the requirements of the Qualifier (see page 2 2 ), then no data is output.
25 MS1 46 Manual Function Codes for PC (Code 39) (Characters in parentheses represent Code 39 bar code printing) F1 (%V A) F4 (%VD) F7 (%VG) F10 (%VJ) Esc (/FK) T ab (/FI) Back T ab (/FJ) Shift Make (.
26 MS146 Manual ASCII Chart (Characters in parentheses represent Code 39 bar code printing) VT ($K) FF ($L) CR ($M) SO ($N) SI ($O) DLE ($P) DC1 ($Q) DC2 ($R) DC3 ($S) DC4 ($T) NAK ($U) ENQ ($E) NUL (.
27 MS146 Manual ASCII Chart, continued (Characters in parentheses represent Code 39 bar code printing) , (/L) - . / 0 1 2 3 4 5 6 7 8 9 : (/Z) ; (%F) < (%G) = (%H) > (%I) ? (%J) @ (%V) ! (/A) &q.
28 MS146 Manual ASCII Chart, continued (Characters in parentheses represent Code 39 bar code printing) L M N O P Q R S T U V W X Y Z [ (%K) (%L) ] (%M) ^ (%N) _ (%O) ' (%W) A B E F G H I J K C D.
29 MS146 Manual ASCII Chart, continued (Characters in parentheses represent Code 39 bar code printing) a (+A) b (+B) c (+C) d (+D) e (+E) f (+F) g (+G) h (+H) i (+I) j (+J) k (+K) l (+L) m (+M) n (+N).
MECHANICAL / ELECTRICAL Scanning Area: 0.43” (1 1mm) from bottom of card Max Card Thickness: 54 mils (.054”, 1.37mm) V oltage: 5 V olts DC TTL (Undecoded): 35mA Power consumption: Decoded: 70mA Cord: 6’ 0” (1.83m) Wei gh t: 6.7 oz. (190 grams) with cable Dimensions: 3.
PINOUTS Pin 1 N/C Pin 2 TXD (Transmit Data) Pin 3 RXD (Receive Data) Pin 4 N/C Pin 5 GND (Ground) Pin 6 N/C Pin 7 CTS (Clear to Send) Pin 8 RTS (Request to Send) Pin 9 VCC (+5V DC Input) RS232 Interfa.
TROUBLESHOOTING MS146 Manual 32 Most problems that you might encounter with your scanner can be solved using the following procedures: T est the scanner on other ports. Unitech scanners are built to the highest standards, and a perceived scanner malfunction may actually be a malfunction in the host computer .
MS146 Manual 33 Problems and Solutions Problem: Scanner doesn’t light up. If the scanner does not emit a light when plugged in, check the interface. If the scanner uses an RS232 interface, you will very likely need a power supply (5V , 300mA). Unplug the scanner and plug it back in.
MS146 Manual 34 Problems and Solutions Problem: Scanner Configuration Manager cannot upload or download. Scanner Configuration Manager can currently upload and download only in the Windows operat- ing system (NT excluded).
35 MS146 Manual Limited Hardware W arranty The Limited W arranty terms described below are solely applicable to the Cus- tomer of Unitech America, Inc’s (af terwards simply referred to as Unitech) products. This warranty applies to equipment only . All consumables and accessories are exempted.
36 MS146 Manual BAR CODE TEST CHART 8012 3453 EAN-8 Unitech 128 Code 128 A 2235700059987 6B Codabar 123456789-0 Code 1 1 Code 32 AO23399013 Code 93 123ABC 0123456 Delta Code W E D G E Code 39 UNITECHE.
37 MS146 Manual 3 045214 834 123 EAN-13 06 47669 13716 UPC-A 02 123457 9 9 UPC-E (01)054123456789(01)659344 EAN 128 1234558 MSI Code 0987654321 Interleaved 2 of 5 9 789576 302 398 0 7 2 0 0 ISBN 957-6.
Een belangrijk punt na aankoop van elk apparaat Unitech MS146I (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Unitech MS146I heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Unitech MS146I vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Unitech MS146I leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Unitech MS146I krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Unitech MS146I bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Unitech MS146I kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Unitech MS146I . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
