Gebruiksaanwijzing /service van het product 2011 Titan van de fabrikant Univex
Ga naar pagina of 251
® 2011 NA VIGA TION S Y STEM OWNER’S MANU AL F or your saf ety , read carefully and k eep in this vehicle. 2011 NISS AN NA VIGA TION S Y S TEM 4NA V-N Printing : July 2010 (05) Publication No.
NISSAN NAVIGA TION SY STEM HELP- DESK CONT ACT INFORMA TION For assistance or inquiries about the NISSAN contact the NISSAN NAVIGA TION S YSTEM HELPDESK at: . ADDRESS: P .O. Box 1588, Orem, UT 84059-992 . E-MAIL: Nissan-Navi-Info@navteq.com . PHONE: 1-888-661-9995 .
T able of Contents Getting started 2 Setting a destination 4 Introduction 1 Other settings 8 Map settings 3 Route guidance 5 Storing a location/route 6 General system information 9 T roubleshooting gu.
.
How to use this manual ....................................... 1 - 2 For safe operation .............................................. 1 - 2 Reference symbols ......................................... 1 - 2 Safety information .........................
This manual uses special words, symbols and icons, organized by function. Please refer to the following items and familiarize yourself with them. Basic operations of the navigation system can be performed in a similar manner for all vehicle models. However, the map screen and setting screen may be different for each model.
This system is primarily designed to help you reach your destination, and it also performs other functions as outlined in this manual. However, you, the driver, must use the system safely and properly. Information concerning road conditions, traffic signs and the availability of services may not always be up-to-date.
This navigation system is certified as a Class 1 laser product. The navigation system complies with DHHS Rules 21 CFR Chapter 1, Subchapter J. WARNING . Do not disassemble or modify this system. There are no user serviceable parts in this navigation system.
2 Getting started Control buttons and functions ............................... 2 - 2 Control panel ................................................ 2 - 2 Start-up screen ................................................. 2 - 3 Menu screen types and how to operate .
NAI1097 CONTROL P ANEL & 1 < > (DA Y/NIGHT) : Push to switch between the day screen and the night screen. & 2 <BACK> : Push to return to the previous screen.
NAV2701 1. The navigation system starts when the ignition switch is turned to the ACC or ON position. NAV2702 2. As the start-up screen is displayed, read the precau tion s carefu lly, highlig ht [OK] and push <ENTER> . INFO: If you do not push <ENTER> for more than 30 seconds, the status screen will be displayed.
NAI0406 MENU SCREENS AND THEIR PUR- POSES Push <DEST> , <ROUTE> , <TRIP> , <INFO> or <SETTING> to display the corresponding menu screen. How to select a menu item Example: <DEST> screen 1. Tilt the joystick up and down.
NAV3061 3. Depending on the item you selected, a detailed menu screen, a character input screen or a setting screen, etc. is displayed. On the screen displayed, make adjustments, input information, etc. accordingly. NAV2704 4. Push <BACK> to return to the previous screen without applying any changes.
NAI0407 USING CONTROLS TO ADJUST V A- LUES, LEVELS, ETC. Use the joystick to adjust the volume of the voice guidance and the display brightness. How to adjust 1. Highligh t the preferr ed setting item a nd push <ENTER> . The color of the corre- sponding adjustment item changes.
NAV2705 MAP MENU SCREEN Push <ENTER> while the current location map screen or a scrolled map screen is displayed to display the menu corresponding to that screen. This menu allows you to quickly use helpful functions, such as setting a destination easily and searching for Points of Interest nearby.
. Store T racking: Allows you to store in the Address Book the route that you have trave lled from the starting point to the current location. “ST ORING A TRACKED ROUTE” (page 6-14) 2-8 Getting st.
NAV2706 Scrolled location map screen If <ENTER> is pushed while a scrolled map screen is displayed, the following options are available. . New Dest: Allows you to set the destination to the location where you pushed <ENTER> .I fa destination is already set, the location will be set as the new destination.
NAV2707 T o ensure safe driving, some functions cannot be operated while driving. The on-screen functions that are not available while driving will be “grayed-out” or muted. Park the vehicle in a safe location and then operate the navigation system.
NAV2708 HOW T O VIEW MAP SCREEN The navigation system displays various informa- tion on the map screen. Screen information & 1 V ehicle icon: Indicates the current vehicle location and the direction that you are traveling. & 2 Guide point: Indicates a guide point on the route.
MAP SCREEN TYPES T wo types of map views are available: Plan View and Birdview TM . NAV2709 Plan View Plan View displays the map in a 2-dimensional environment similar to a road map. NAV2710 Birdview TM Birdview TM displays the view from an elevated perspective.
NAV2711 SWIT CHING THE MAP VIEW 1. Push <ENTER> while the current location map screen is displayed. NAV2712 2. Highlight [Map View] and push <ENTER> . NAV2713 3. Highlight the preferred map view and push <ENTER> . The indicator of the selected map view illuminates.
INFO: . When you select a map view, a preview of that view is displayed on the right side of the screen. . Y ou can also switch the map view using the following procedure. 1) Push <SETTING> . 2) Highlight [Navigation] and push <ENTER> . 3) Highlight [Map View] and push <ENTER> .
NAI0408 MOVING AROUND WIT HIN A MAP Y ou can manually move across the map to view the surrounding areas or a preferred location. 1. Tilt the joystick corresponding to the direc- tion that you want to move across the map. Keep t ilting the joystick to conti nuously move across the map in that direction.
NAI0409 CHANGING THE SCALE OF A MAP Push <ZOOM IN> ( )o r <ZOOM OUT> ( ) . A scale appears on the left side of the screen. T o view the map in detail, push <ZOOM IN> ( ).
HOW T O ST ORE Y OUR HO ME If your home location is already stored in the Address Book, it can be easily retrieved to set the route to your home. The procedure to store your home location is the same as for storing any other location.
NAV2715 3. Highlight [Home Location (Add New)] and push <ENTER> . NAV3023 4. A confirmation message is displayed. Con- firm the contents of the message, highlight [Y es] and push <ENTER> . NAV3048 5 . Highlight [Street Address] and push <ENTER> .
NAV3062 6. Enter the address of your home, highlight [OK] and push <ENTER> . The map screen is displayed. “SETTING A STREET ADDRESS” (page 4-3) NAV3050 7. Using the joystick, adjust your home location if necessary. 8 . After adjusting the location, push <ENTER> .
CHARACTER (letter and number) IN PUT SCREEN Y ou will have to enter alphanumeric characters when setting a destination, sear ching for a facility or editing the stored locations, etc. NAV3063 1. Use the joystick to highlight a character on the displayed keyboard.
NAV3065 3. Push <BACK> or highlight [ ], and push <ENTER> to delete the last character entered. Push and hold <BACK> to delete all the characters entered. Highlight [ ] and push <ENTER> to enter a space. NAV3066 4. After finishing the entry, highlight [OK] and push <ENTER> .
PHONE NUMBER INPU T SCREEN Y ou can enter a phone number as a search method to look for a point of interest. INFO: Only the locations included in the database in the map DVD-ROM can be searched by the phone number. NAV2723 1. Use the joystick to highlight a number on the displayed keyboard.
NAV2725 3. Push <BACK> or highlight [ ], and push <ENTER> to delete the last number en- tered. Push and hold <BACK> to delete all the numbers entered.
NAV2727 LIST SCREEN After searching for a point of interest, a list screen is displayed. Depending on the lis t displayed, it can be sorted. Items displayed in a list & 1 Highlight the preferred item from the list and push <ENTER> to select it.
SEARCHING FOR A DESTINA TION As an example, the method for setting an airport as the destination using [Points of Interest] is described here. NAI0410 1.
NAV2729 3. Highlight [T ravel] and push <ENTER> . NAV2730 4. From the category list, highlight [AIRPORT] and push <ENTER> . The character input screen is displayed. NAV3067 5. Highlight [OK] and push <ENTER> . A list screen is displayed.
NAV2732 6. Highlight the preferred airport from the list and push <ENTER> . NAV2733 INFO: By selecting [By Distance], you can sort the list by the shortest distance. The position of the selected location is displayed in the preview on the right side of the screen.
NAV2735 INFO: Even after setting a destination, you can adjust the location of the destination, store the route, etc. if necessary. “OPERA TIONS AFTER SETTING A DESTINA TION” (page 4-45) NAV2736 ST ARTING ROUTE GUIDA NCE After setting the destination and performing route calculation, the suggested route is dis- played.
NAV2738 3. When approaching a guide point, the system automatically changes to the split screen and shows an enlarged view of the intersection in the left screen.
DELETING A ROUTE T o delete a route already set, use the following procedure. If you delete a route, the destination is also deleted. NAI0411 1. Push <ROUTE> .
NAV2741 3. A confirmation message is displayed. High- light [Y es] and push <ENTER> . INFO: If a route is cancelled, [Cancel Route Guidance] changes to [Resume Route Guidance]. Highlight [Resume Route Guidance] and push <ENTER> to reactivate the cancelled route.
NAV3052 2 . Highlight [Guidance V oice] and push <ENTER> . The indicator illuminates if voice guidance is activated. ADJUSTING VOICE GUIDA NCE VO- LUME Y ou can adjust the volume of voice guidance.
NAV3053 2. Highlight [Guidance V olume] and push <ENTER> . NAV3054 3. Adjust the voice guidance volume using the joystick. Getting started 2-33.
MEMO 2-34 Getting started.
3 Map settings Map types ........................................................ 3 - 2 Plan View ..................................................... 3 - 2 Birdview TM .................................................... 3 - 3 Switching the map view .
T wo types of map views are available: Plan View and Birdview TM . PLAN VIEW Plan View displays the map in a 2-dimensional environment similar to a road map. NAV2708 Screen information & 1 V ehicle icon: Indicates the current vehicle location and the direction that you are traveling.
tion and start route guidance. & 5 Suggested route: Appears in bold yellow during route gui- dance. & 6 / Direction indicator: Indicates the direction of the map. & 7 Scale indicator: Indicates the scale of the map. & 8 Arrow: Indicates the distance to the next guide point and the turning direction at that guide point.
The map view can be changed between Plan View and Birdview TM . The map can also be displayed in the split screen mode. NAV2711 1. Push <ENTER> while the current location map screen is displayed. NAV2712 2. Highlight [Map View] and push <ENTER> .
NAV2747 3. Highlight the preferred map view and push <ENTER> . The indicator of the selected map view illuminates. 4. Pus h <MAP> to return to the curr ent location map screen. A VAILABLE VIEWS . Plan View: Switches to Plan View. . Birdview TM : Switches to Birdview TM .
NAV2748 Split (Plan View) NAV2749 Split (Birdview TM ) NAV2750 INFO: Y ou can also se t the ma p view us ing th e following procedure. 1) Push <SETTING> . 2) Highlight [Navigation] and push <ENTER> . 3) Highlight [Map View] and push <ENTER> .
NAI0408 The operations for moving across the map are different between Plan View and Birdview TM . PLAN VIEW Tilt the joystick corresponding to the direction that you want to move across the map. K eep tilting the joystick to continuously move across the map in that direction.
NAI0414 BIRDVIEW TM The joystick allows movement in the following ways. Keep tilting the joystick to continuously move across the map in that direction. & 1 Rotates the map clockwise. & 2 Rotates the map counterclockwise. & 3 Moves the cross pointer on the map upward.
NAI0415 RETURNING T O THE CURRENT VEHI- CLE L OCA TION Push <MAP> . The current location map screen is displayed. INFO: . The previous screen can be displayed by pushing <BACK> . Y ou can also return to the current location map screen by repeat- edly pushing <BACK> .
MAP SCROLLING INFORMA TION Information about the location, on which the center of the cross pointer is placed by scrolling on the map, can be set to be displayed. 1. Push <SETTING> . NAV3055 2. Highlight [Navigation] and push <ENTER> . NAV2752 3.
NAV2753 4. Highlight the preferred information item and push <ENTER> . The indicator of the selected information item illuminates. Available information items: . Address Book Icons . Destination/Waypoint Icons . Latitude/Longitude Info NAV2754 5.
NAI0409 Push <ZOOM IN> ( )o r <ZOOM OUT> ( ) . A scale appears on the left side of the screen. T o view the map in detail, push <ZOOM IN> ( ). T o view a wider area, push <ZOOM OUT> ( ). The scale will automatically disappear when neither <ZOOM IN> ( ) nor <ZOOM OUT> ( ) has been pushed for several seconds.
MAP SCALE The following scales are available depending on the map view . . In Plan View: Widest (1/51,200,000) to the most detailed (1/5,000) . In Birdview TM : Widest (1/20,480,000) to the most detailed (viewpoint height at 1/25,000) Scale level of the Plan View display Map scale Actual distance 1:51.
Scale level of the Birdview TM display Map scale Distance between grids 1:20.48 million 160 miles (256 km) 1:5.12 million 32 miles (64 km) 1:2.56 million 16 miles (32 km) 1:1.
Other settings are also available for the map screen, such as changing the map direction, splitting the screen, etc. SETTINGS OF HEADING/LONG RANGE MAP VIEW Y ou can change the map direction (orientation) in Plan View or change the position of the vehicle icon to view a wider area in the traveling direction.
NAV2760 3. Highlight the preferred map orientation and push <ENTER> . The indicator of the selected map orientation illuminates. INFO: [Long Range Map View] is displayed only when you select [Heading Up]. 4. Pus h <MAP> to return to the curr ent location map screen.
NAV2763 Long Range Map View INFO: If the map orientation is switched, the icon displayed in the lower left corner is also switched. : North Up : Heading Up NAV2764 INFO: Y ou can also set the orientation of the map using the following procedure. 1) Push <SETTING> .
NAV4173 1. Push <ENTER> while the current location map screen is displayed. NAV4174 2. Highlight [Heading] and push <ENTER> . NAV2765 3. Highlig ht [Birdview TM Angle] and push <ENTER> . INFO: This setting is available only when the map view is set to the Birdview TM or Split (Birdview TM ) mode.
NAV2766 4. Adjust the Birdview TM angle by moving the cursor in the direction of [ ]o r[ ]. 5. Pus h <MAP> to return to the curr ent location map screen. NAV2764 INFO: Y ou can also set the Birdview TM angle using the following procedure. 1) Push <SETTING> .
CHANGING THE SC ALE OF THE LEFT SCREEN When the split screen is displayed, you can change the scale of the left screen. NAV2711 1. Push <ENTER> while the current location map screen is displayed. NAV2712 2. Highlight [Map View] and push <ENTER> .
NAV2767 3. Highlight [Change Map Scale for Left] and push <ENTER> . INFO: [Change Map Scale for Left] is displayed only when the map view is in the Split (Plan View) or Split (Birdview TM ) mode. NAV2768 4. Highlight [Map Scale] and push <ENTER> .
Some landmarks in the surrounding area can be displayed as icons on the screen. DISPLA YING LANDMARK ICONS This allows you to display or hide the landmark icons by type. Landmark icons that can be displayed . Restaurant . Gas Station . Hotel . AT M . Rest Area NAV2711 1.
NAV2770 3. Highlight the preferred icon and push <ENTER> . The icon display setting toggles on and off each time you push <ENTER> . The indicator of the selected icon illumi- nates. NAV2771 4. Pus h <MAP> to return to the curr ent location map screen.
MAP S YMBOLS This navigation system uses symbols to display facilities. NAI0502 3-24 Map settings.
NAI0417 Map settings 3-25.
Road color The road types are differentiated by colors. Freeway: Pink with red border Main road: Amber Narrow street: Gray Road with incomplete map data: Dark green 3-26 Map settings.
4 Setting a destination Destination screen .............................................. 4 - 2 Basic operation ............................................. 4 - 2 Setting a street address/residence as the destination .................................
There are several methods you can use to set your destination. Understand the advantages of each method and select the best method for finding and setting your destination. BASIC OPERA TION 1. Push <DEST> . 2. Highlight the preferred destination setting method and push <ENTER> .
. Others — Phone Number: Searches for a destination by the tele- phone number. — Nearby Places: Searches for a business/location near your vehicle. — Previous Starting Point: Sets the previous starting point as the destination. — Stored Route: Selects a stored route.
NAV3068 INFO: Character input screen for Street Address & 1 Region: The region previously entered is auto- matically displayed. It can be changed. & 2 City: By default, all cities in the region are available. Route calculation conditions can be narrowed down by entering the name of the city.
NAV3070 4. Enter the name of the street. After finishing the entry, highlight [OK] and push <ENTER> . A list of cities is displayed. NAV2829 5. Highlight the correct city of the destination from the list and push <ENTER> .
NAV2831 INFO: Even after setting a destination, you can adjust the location of the destination, store the route, etc. “OPERA TIONS AFTER SETTING A DESTINA TION” (page 4-45) NAV3071 Changing the region 1. From the Street Address destination entry screen, highlight [Region] and push <ENTER> to change the region.
NAV3073 Specifying a city 1. From the Street Address destination entry screen, highlight [City] and push <ENTER> to narrow down the route calculation condi- tions by entering the name of the city. NAV3074 2. Enter the name of the city, highlight [OK] and push <ENTER> .
NAV2787 SETTING A C ITY CENTER 1. Push <DEST> . 2. Highlight [Others] and push <ENTER> . NAV2837 3 . Highlight [City Center] and push <ENTER> . A character input screen is displayed. NAV3075 INFO: Character input screen for City Center & 1 Region: The region previously entered is auto- matically displayed.
& 3 Symbols/A-Z: Symbol keys are displayed by high- lighting [Symbols] and pushing <ENTER> . Alphabet keys are dis- played by highlighting [A- Z] and push- ing <ENTER> . NAV3076 4. Highligh t [City] and push <EN TER> to narrow down the route calculation condi- tions by entering the name of the city.
NAV2841 INFO: By selecting [By Distance], you can sort the list by the nearest distance. NAV2842 6. The selected destination is displayed at the center o f the map. High light [OK ] after confirming the location of the displayed destination, and push <ENTER> .
NAV3077 Changing the region 1. From the City Center destination entry screen, highlight [Region] and push <ENTER> to change the region. NAV3078 2.
NAV2787 SETTING AN INTERSECT ION 1. Push <DEST> . 2. Highlight [Others] and push <ENTER> . NAV2846 3 . Highlight [Intersection] and push <ENTER> .
NAV3079 INFO: Character input screen for Intersection & 1 Region: The region previously entered is auto- matically displayed. It can be changed. & 2 City: By default, all cities in the region are available. Route calculation conditions can be narrowed down by entering the name of the city.
NAV3080 4. Enter the name of the 1st street. After finishing the entry, highlight [OK] and push <ENTER> . A list screen is displayed. NAV2849 5. Highlight a street as the 1st street from the list and push <ENTER> . NAV3081 6. Enter the name of the 2nd street.
NAV2851 7. Highlight a street as the 2nd street from the list and push <ENTER> . NAV2852 8. The selected destination is displayed at the center o f the map. High light [OK ] after confirming the location of the displayed destination, and push <ENTER> .
NAV3082 Changing the region 1. From the Intersection destination entry screen, highlight [Region] and push <ENTER> to change the region. NAV3083 2. Highlight the preferre d region and push <ENTER> . A character input screen is displayed. NAV3084 Specifying a city 1.
NAV3085 2. Enter the name of the city, highlight [OK] and push <ENTER> . A list screen is displayed. INFO: . Highlight [All Cities] and push <ENTER> to include all cities in the region as the route calculation condition. . Highlight [Last 5 Cities] and push <ENTER> to display 5 cities recently set as destinations.
SETTING FROM MAP This allows you to search for a destination by scrolling the map, and then have the system calculate a route to the destination. NAV2859 1. Scroll the map, place the cross pointer over the preferred location, and push <ENTER> . INFO: .
NAV2861 3. The sys tem s ets the desti natio n to the selected location and starts calcula ting a route. NAV2862 INFO: If you se t the de stina tion on a freewa y, a confirmation message is displayed.
The follo wing sett ing met hods are ava ilable when setting the destination to your home or any location stored in the Address Book. . Setting your home This allows you to set your home as the destination and have the system calculate a route. It is useful especially when you are searching for a route to return to your home.
NAV2775 3 . Highlight [Home Locatio n] and push <ENTER> . INFO: If you have not stored your home yet, the system will automatically display a screen for storing it. “ST ORING A L OCA TION” (page 6-2) NAV2776 4. A confirmation message is displayed, and the system sets your home as the destina- tion.
NAV2774 SETTING FROM ADDRE SS BOOK 1. Push <DEST> . 2 . Highlight [Address Book] and push <ENTER> . A list screen is displayed. NAV2778 3. Highlight the preferred location from the list and push <ENTER> . NAV2779 INFO: Selecting [Sort List] displays a list of various sort functions.
NAV2780 & 1 Sort by number: The Address Book entries are displayed in ascending numerical order. & 2 Sort by name: The Address Book entries are displayed in alphabetic order. & 3 Sort by icon: By selecting a particular icon, a list that contains only the Address Book entries associated with that icon is displayed.
NAV2782 INFO: Even after setting a destination, you can adjust the location of the destination, store the route, etc. “OPERA TIONS AFTER SETTING A DESTINA TION” (page 4-45) NAV2783 SETTING A PREVIOUS DES TINA TION 1. Push <DEST> . 2. Highlight [Previous Destinations] and push <ENTER> .
NAV2785 4. The selected destination is displayed at the center o f the map. High light [OK ] after confirming the location of the displayed destination, and push <ENTER> . The sys tem s ets the desti natio n to the selected location and starts calcula ting a route.
NAV2788 3. Highlight [Previous Starting Point] and push <ENTER> . NAV2789 4. The starting point of the route of the previous route guidance is displayed at the center o f the map. High light [OK ] after confirming the location of the displayed destination, and push <ENTER> .
NAV2787 SETTING FROM ST ORED RO UTES 1. Push <DEST> . 2. Highlight [Others] and push <ENTER> . NAV2791 3 . H i g h l i g h t[ S t o r e dR o u t e s ]a n dp u s h <ENTER> . A list screen is displayed. NAV2792 4. Highlight the preferred route from the list and push <ENTER> .
When you are setting the destination to a facility, the following methods are available. . Setting a Point of Interest This allows you to find a facility by type, and then have the system calculate a route to that destination. Specify the region and city of the destination to find it more quickly.
NAV2794 4 . Highlight the subcategory and push <ENTER> . A character input screen is displayed. Setting a destination 4-29.
NAV3086 INFO: Character input screen for Points of Interest & 1 Region: The region previously entered is auto- matically displayed. It can be changed. & 2 City: By default, all cities in the region are available. Route calculation conditions can be narrowed down by entering the name of the city.
NAV3087 5. Highlight [Name] and push <ENTER> . Enter the name of the destination facility. NAV3088 6. After finishing the entry, highlight [OK] and push <ENTER> . A list screen is displayed. NAV2798 7. Highlight the preferred destination facility from the list and push <ENTER> .
NAV2799 INFO: By selecting [By Distance], you can sort the list by the nearest distance. The position of the selected location is displayed in the preview on the right side of the screen. NAV2800 8. The selected destination is displayed at the center o f the map.
NAV3089 Changing the region 1. From the Point of Interest destination entry screen, highlight [Region] and push <ENTER> to change the region. NAV3090 2. Highlight the preferre d region and push <ENTER> . A character input screen is displayed.
NAV3092 2. Enter the name of the city, highlight [OK] and push <ENTER> . INFO: . Highlight [All Cities] and push <ENTER> to include all cities in the region as the route calculation condition. . Highlight [Last 5 Cities] and push <ENTER> to display 5 cities recently set as destinations.
Category list Restaurant Restaurant all African, American, Austrian, Balkan, Barbecue/Southern, Belgian, Bistro, Bohemian, Brewpub, British isles, Cajun/Caribbean, Californian, Canadian, Chinese, Cont.
T ravel Airport Border crossing Bus station Commuter rail station Ferry terminal Hotel Hotel all America Inn & Suites, Amerihost (Cendant) , Amerisuites, Baymont Inn & Suites, Best Western, Ca.
Banking AT M Bank Hospital Community City hall, Community center, Convention/Exhibition center, Court house, Historical monument, Hospital, Library , Marina, Museum, Police station, Park/Recreation ar.
NAV2787 SETTING A FREEWA Y ENTRANCE/ EXIT 1. Push <DEST> . 2. Highlight [Others] and push <ENTER> . NAV2807 3. Highlight [Freeway Entrance/Exit] and push <ENTER> . A character input screen is displayed. NAV3093 4. Select a region and enter the name of the freeway.
NAV2809 6. Highlight the freeway of the destination from the list, and push <ENTER> . NAV2810 7. Highlight [Entrance] or [Exit] and push <ENTER> . A list screen is displayed. NAV2811 8. Select the preferred destination from the list. The position of the selected location is displayed in the preview on the right side of the screen.
NAV2812 INFO: By selecting [By Distance], you can sort the list by the nearest distance. NAV2813 9. The selected destination is displayed at the center o f the map. High light [OK ] after confirming the location of the displayed destination, and push <ENTER> .
NAV2787 SETTING BY PHONE NUMBER INFO: . If the area code of the specified telephone number does not exist in the map data, the system will not search for the location. . Only the locations included in the database in the map DVD-ROM can be searched by the phone number.
NAV2817 6. The selected destination is displayed at the center o f the map. High light [OK ] after confirming the location of the displayed destination, and push <ENTER> . The sys tem s ets the desti natio n to the selected location and starts calcula ting a route.
NAV2819 3 . Highlight [Nearby Places] and push <ENTER> . NAV2820 4. Highlight the preferred destination Points of Interest and push <ENTER> . A list screen is displayed. INFO: If there are any particular Points of Interest that you intend to use frequently, you can store them in the list of nearby Points of Interest.
NAV2822 INFO: If the suggested route is alread y set, by highlighting [Show Along Route] and push- ing <ENTER> , the system displays only the Points of Interest located along the route. NAV2823 6. The sys tem s ets the desti natio n to the selected location and starts calcula ting a route.
The following operations are available after you set a destination. INFO: The menu will not be displayed if you select, [Stored Route] or [Nearby Places] from the Destination menu. NAV2863 A VAILABLE SETTING ITEMS . OK: Sets the destination. If the route is already set, the location becomes the new destina- tion, and the route is recalculated.
ADJUSTING THE LOCA TION OF THE DESTINA TION Y ou can adjust the location of the destination by moving the cross pointer across the map. NAV2864 1. Set the destination using an appropriate method. 2 . Highlight [Alter Location] and push <ENTER> .
ADDING ADDITIONAL DESTINA TIONS T O A ROUTE Even after the route is already set, you can add a searched location as a n ew destination or waypoint to that route. If the route has not been set, [Add to Route] cannot be selected. NAV2866 1. Set the destination using an appropriate method.
VIEWING INFORMA TION ABOUT THE SEARCHED L OCA TION Information (street address and phone number) about Points of Interest stored in the map DVD- ROM data can be displayed. NAV2868 1. Set the destination using an appropriate method. 2. Highlight [POI Info] and push <ENTER> .
ST ORING A L OCA TION A searched loc ation can be stored in the Address Book. Then it can be easily retrieved and set as a destination (or waypoint) . NAV2870 1. Set the destination using an appropriate method. 2 . Highlight [Store Location] and push <ENTER> .
MEMO 4-50 Setting a destination.
5 Route guidance Procedures after setting a destination ..................... 5 - 2 Available items after setting a destination ............. 5 - 2 Starting route guidance ................................... 5 - 3 Selecting a route ...................
After you set a destination using an appropriate method an d selec t [OK], th e system s tarts calculating a route to the destination. Select the pr eferred se tting item a nd push <ENTER> .
NAV2873 ST ARTING ROUTE GUIDA NCE 1. Highlight [Start] and push <ENTER> . Route guidance starts. NAV2874 SELECTING A ROUTE 1 . Highlight [More Routes] and push <ENTER> . 2. Highlight the preferred route condition and push <ENTER> . 3.
NAV2876 CONFIRMING A ROUTE 1. Highlight [Route Info] and push <ENTER> . 2. Highlight the preferred information item and push <ENTER> . 3. Push <BACK> to return to the previous screen. NAV2877 Available information . Preview: Allows you to confirm the route by scrolling on the map manually.
ADDING A DESTINA TION OR W A Y - POINT Before starting route guidance, you can add destinations and/or waypoints. A total of 6 destinations or waypoints can be set. NAV2878 1 . Highlight [Add Way Pt.] and push <ENTER> . NAV2879 2. Set additional destinations or waypoints and push <ENTER> .
NAV2880 3. The selected location is displayed at the center of the map. Highlight [Add to Route] after confirming the location and push <ENTER> . INFO: Y ou can modify the location by selecting [Alter Location]. The method of adjusting a location is the same as the one for a destination.
After setting the route, select [Start] to begin route guidance. Throughout route guidance, the system navi- gates you through the guide points using visual and voice guidance. CAUTION The navigation system’s visual and voice guidance is for reference purposes only.
GUIDANCE SCREENS AND PREVIEW MODE Route guidance displays map scre ens and various information according to the situation. NAV2882 When route guidance starts, the Small T urn Arrow on Map is displayed in the upper left corner of the map screen. This arrow indicates the turning direction at the next guide point (corner or intersection) .
NAV2884 Junction guidance While driving on a freeway, when the vehicle is approximately 1 mile (approximately 2 km) from a junction, the system automatically switches to the split screen and displays an enlarged view of the junction (3D) in the left screen.
During route guidance, you can modify the route conditions or confirm the route information. Set the appropriate route condition according to your purpose. BASIC OPERA TION 1. Push <ROUTE> . 2. Highligh t the preferr ed setting item a nd push <ENTER> .
. Route Information: Allows you to confirm the route by the route information or simulation. “CONFIRMING A ROUTE” (page 5- 26) . Guidance Settings: Y ou can set various guidance information to be displayed during route guidance and activate or deactivate route and/or voice guidance.
. Route Priority Settings Allows you to set the priority for the route calculation. . Detailed Route Priorities Allows you to set detailed route conditions. “DET AILED ROUTE PRIORITIES” (page 5-13) ROUTE PRIORIT Y SETTINGS The route can be recalculated after changing the route calculation conditions anywhere along the route.
DET AILED ROUTE PRIORITIES Detailed conditions can be set for the route calculation. Basic operation 1. Push <ROUTE> . 2 . Highlight [Route Priority] and push <ENTER> . 3. High lig ht [De tai led Ro ute Pr ior itie s] an d push <ENTER> .
INFO: . The recalculated route may not be the shortest route because the system priori- tizes easy-to-drive roads for safety reasons. . If you set the route conditions from [Route Priority], all sections in the route are subject to the same route conditions even though you have set different route conditions for different sections in [Edit Route].
Y ou can calculate a detour for a section of the route, edit the route or store the route. BASIC OPERA TION 1. Push <ROUTE> . 2. Highligh t [Change/E dit Route] and push <ENTER> . 3. Highligh t the preferr ed setting item a nd push <ENTER> .
. Store Current Route: A calculated route can be stored. A max- imum of 5 routes can be stored. Stored routes can be easily retrieved and set as the suggested route.
NAV2890 SETTING A DET OUR ROUTE 1. Highlight [Detour] and push <ENTER> . NAV2891 2 . Highlight a detour distance and push <ENTER> . After calculating the detour, the system displays the detour route on the map. INFO: . When the vehicle has deviated from the suggested route, [Detour] cannot be se- lected.
NAV2892 RECAL CULA TE ROUTE 1. Highlight [Recalculate Route] and push <ENTER> . NAV2893 2. A message is displayed, and the route is recalculated. NAV2894 3. Set the route conditions. After finishing the setting, highlight [Start] and push <ENTER> .
NAV2895 EDITING A ROUTE 1. Highlight [Edit Route] and push <ENTER> . 2. Highlight the preferred condition and push <ENTER> . 3. Push <BACK> to return to the previous scre en. Pus h <MAP> to ret urn to th e current location map screen.
“Changing route calculation conditions” (page 5-24) & 5 Allows you to add a destination. “Setting a destination or waypoint” (page 5-20) & 6 Allows you to add a waypoint. “Setting a destination or waypoint” (page 5-20) Setting a destination or waypoint Y ou can add a destination or waypoint to the route already set.
NAV2898 2. Set a destination or waypoint. The method of searching for a destination or waypoint is the same as the one for a destination. “4. Setting a destination” NAV2899 3. The selected location is displayed at the center of the map. Highlight [Add to Route] after confirming the location and push <ENTER> .
Editing/deleting a destin ation or way- point Y ou can modify or delete the destination or waypoint already set. INFO: If you modif y or delete a location wh en a suggested route is already set, the prior suggested route will be recalculated accord- ingly.
NAV2903 3. Highlight [Delete] and push <ENTER> to delete the location. NAV2904 4. A confirmation message is displayed. Con- firm the contents of the message, highlight [Y es] and push <ENTER> . The destination or waypoint is deleted from the route.
Changing route calculation co nditions Each section of the route between waypoints can have different route calculation conditions. After setting these conditions, you can recalcu- late the entire route. NAV2905 1. Highlight the preferred section of the route to the destination or waypoint and push <ENTER> .
NAV2907 3. The system automatically re calculates a route according to the conditions set. The screen will automatically return to the [Edit Route] screen after route calculation. NAV2908 4. The icon corresponding to the set route condition is displayed.
When the suggested route is displayed after calculation, you can confirm the route informa- tion or simulate the suggested route. BASIC OPERA TION 1. Push <ROUTE> . 2. Highlight [Route Information] and push <ENTER> . 3. Highlight the preferred item and push <ENTER> .
NAV2910 USING TURN LIST 1. Y ou can confirm the information (e.g., inter- sections) on the route to the destination by scrolling the screen using the joystick. 2. Pus h <MAP> to return to the curr ent location map screen. NAV2911 USING ROUTE PREVIEW 1 .
NAV2912 CONFIRMING BY SIMULA TION 1 . Highlight the pre ferred key and push <ENTER> . : Pauses the simulation. : Resumes the simulation. : Ends the simulat ion. 2. Push <BACK> to cancel the simulation and return to the current location map screen.
Y ou can set various guidance information to be displayed during route guidance and activate or deactivate route and/or voice guidance. BASIC OPERA TION 1. Push <ROUTE> . 2. High lig ht [Gu idan ce Set tin gs] an d push <ENTER> . 3. Highlight the preferred item and push <ENTER> .
. Set Average Speeds: Allows you to set an average vehicle speed for each type of road, which is reflected in the calculation of the required time to the destination.
NAV2914 VISUAL GUIDANCE SETTINGS 1. Highlight [Guidance Screen Default] and push <ENTER> . 2 . Th e indicator of the selected type of guidance illuminates. NAV2915 Intersection Map: Enlarged intersection view INFO: Push <MAP> to switch to the full map screen.
VOICE GUIDANCE SET TINGS Y ou can set how many times voice guidance is repeated. NAV2917 1. Highlight [V oice Announcements] and push <ENTER> . NAV2918 2. Highlight [T wice] or [Three Times] and push <ENTER> . The indicator for the selected number of repetitions illuminates.
SET A VERAGE SPEEDS Y ou can calculate the required time to the destination based on the set vehicle speeds. Basic operation 1. Highlight [Set Average Speeds] and push <ENTER> . 2. Highlight the preferred item and push <ENTER> . 3. Use the joystick to make an adjustment.
. Reset: Sets the average vehicle speeds to the default values. 5-34 Route guidance.
Y ou can delete a route already set at any time. If you delete a route, the destination and way- points are also deleted. It is also possible to reactivate the route that you deleted. NAV2920 DELETING A ROUTE 1. Push <ROUTE> . 2. Hig hli ght [C an cel R oute Guid an ce] a nd push <ENTER> .
NAV2922 REACTIV A TING A ROUTE 1. Push <ROUTE> . 2. Highlight [Resume Route Guidance] and push <ENTER> . NAV2923 3. A confirmation message is displayed. High- light [Y es] and push <ENTER> . The route you have deleted is reactivated.
6 Storing a location/route Storing a location ............................................... 6 - 2 Storing a location by searching ......................... 6 - 2 Storing the current vehicle location ..................... 6 - 5 Storing a location by moving the map .
Locations that you often visit can be stored in the Address Book. The stored locations can be easily retrieved to set them as a destination or waypoint. INFO: . The Address Book can store up to 100 locations. . New information placed in the same storage position will overwrite the old data.
NAV2930 3 . Highlight [Address Book] and push <ENTER> . NAV2931 4 . Highlight [Stored Location] and push <ENTER> . NAV2932 5. Highlight [Home Location (Add New)] or [None (Add New)] and push <ENTER> .
NAV2933 6. Highlight the appropriate method to search for a location and push <ENTER> . “4. Setting a destination” NAV2934 7. When your preferred location is displayed at the center of the map, confirm the location and push <ENTER> . A message is displayed, and the location is stored in the Address Book.
NAV2924 ST ORING THE CURRENT VEHICLE L OCA TION 1. Pus h <ENTER> at the current vehicle location. NAV2925 2 . Highlight [Store Location] and push <ENTER> . A message is displayed, and the current vehicle location is stored in the Address Book.
NAV2927 ST ORING A L OCA TION BY MOVING THE MAP 1. Move to the preferred location on the map and push <ENTER> . NAV2928 2 . Highlight [Store Location] and push <ENTER> . A message is displayed, and the location is stored in the Address Book.
A VOID ARE A SETTINGS An Avoid Area can be stored. The Avoid Area is an area that you want to exclude from a route, such as a road that is always congested. Once you store Avoid Areas, the system avoids those areas when calculating a route. Up to 10 Avoid Areas can be stored.
NAV2937 4. Highlight [None (Add New)] and push <ENTER> . INFO: A maximum of 5 Avoid Areas can be stored. “DELETING A ST ORED ITEM” (page 6-28) NAV2938 5. Highlight the appropriate method to search for a location and push <ENTER> . “4.
NAV4175 Rename 1. A character input screen is displayed. 2. Enter the preferred name. 3. Highlight [OK] and push <ENTER> . NAI0419 Alter Location 1. Using the joystick, adjust the location of the Avoid Area. 2 . After adjusting the location, push <ENTER> .
NAV2941 Resize Area Select the range from 5 available levels. After selecting the range, push <ENTER> . INFO: Push <ZOOM IN> ( )o r <ZOOM OUT> ( ) to change the scale of the map.
NAV2942 FWY If you want to include freeways in the Avoid Area, push <ENTER> to illuminate this indica- tor. NAV2943 The Avo id Area is displa yed in gr een if it includes a freeway or in blue if it does not include freeways. INFO: If you set an Avoid Area at the current vehicle location, the system will not provide route guidance.
A calculated route can be stored. A maximum of 5 routes can be stored. Stored routes can be easily retrieved and set as the suggested route. INFO: Stored route includes only locations (destination and waypoints) and route calculation conditions, not the route itself.
NAV2946 4. A confirmation message is displayed. Con- firm the contents of the message, highlight [Y es] and push <ENTER> . The current route is stored. NAV2947 INFO: Y ou can also store a route using the following procedure. 1) Push <SETTING> .
Y ou can store the route you have traveled up to the current location. A maximum of 5 tracked routes can be stored. A tracked route must not exceed 12 miles (20 km) in distance. The stored tracked route can be displayed on the map as necessary. 1. Push <ENTER> .
Items store d in the Addres s Book can be modified. Y ou can edit these settings to make the navigation system more useful. BASIC OPERA TION 1. Push <SETTING> . 2. Highlight [Navigation] and push <ENTER> . 3 . Highlight [Address Book] and push <ENTER> .
. Delete Stored Items: Deletes a stored location or route. “DELETING ALL ST ORED ITEMS” (page 6-31) NAV2951 EDITING THE ST ORED HOME AND L OCA TION 1. Highlight the preferred stored home location or stored location and push <ENTER> . INFO: Selecting [Sort List] displays a list of various sort functions.
MINOR ADJUSTMEN T OF THE ST ORED HOME AND LOCA TIONS When you select [Edit], you can edit the following items of the home or stored location. . Show Icon on Map . Name (only for stored locations) . Icon . Sound . Direction . Distance . Phone No. . Group (only for stored locations) .
NAV2955 2. Enter the preferred name for the stored location. “CHARACTER (letter and number) INPUT SCREEN” (page 2-20) 3. Highlight [OK] and push <ENTER> . The name is stored. NAV2956 Icon Changes the icon of the home or stored location to the preferred one.
Icon List : NAI0420 Storing a location/route 6-19.
NAV2958 Sound Sets the tone of the arrival alarm that sounds when the vehicle approaches the home or a stored location. 1. Highlight [Sound] and push <ENTER> . A sound list is displayed. NAV2959 2. Highlight the preferred alarm tone by scrol- ling the list using the joystick.
NAV2960 Direction Sets the alarm to sound when approaching from a specific direction. 1. Highlight [Direction] and push <ENTER> . The home or stored location is displayed at the center of the map. NAV2961 2. Set the direction that sounds the alarm using the joystick.
NAV2963 2. Highlight the preferred distance option and push <ENTER> . The indicator of the selected distance illuminates. Available distance options: .
NAV2965 2. Enter the telephone number of the home or stored location. “PHONE NUMBER INPUT SCREEN” (page 2-22) 3. Highlight [OK] and push <ENTER> .
NAV3095 Entry Number (only for stored locations) Swaps the position numbers of any two stored locations in the list. 1 . Highlight [Entry Number] and push <ENTER> . A list of stored locations is displayed. NAV3096 2. Highlight the stored locations you want to swap and push <ENTER> .
NAV2970 EDITING THE ST ORED ROUTE 1. Highlight the preferred stored route and push <ENTER> . 2. Tilt the joystick to the right to select the Edit screen. The setting items are highlighted. 3. Highlight the preferred item and push <ENTER> .
NAV2972 EDITING THE ST ORED TRACKING 1. Highlight the preferred stored tracked route and push <ENTER> . The [Show] indicator for the stored tracked route illuminates, and the route is displayed on the map. Tilt the joystick to the right to highlight [Edit].
NAV2975 EDITING THE AVOID AREA 1. Highlight the preferred Avoid Area and push <ENTER> . 2. Highlight the preferred item and push <ENTER> . The setting method is the same as the one for the Avoid Area setting. “ AVOID AREA SETTINGS” (page 6- 7) INFO: If you select [None (Add New)], you can add an Avoid Area.
Y ou can delete locations and routes stored in the Address Book. T wo deletion methods are available, deleting an individual item and deleting all stored items. NOTE: Deleted items cannot be restored. Before deleting an item, always make sure that the item is truly not necessary.
NAV2979 5. Highlight the pref erred location/ route for deletion and push <ENTER> . NAV2980 6. Highlight [Delete] and push <ENTER> . NAV2981 7. A confirmation message is displayed. Con- firm the contents of the message, highlight [Y es] and push <ENTER> .
NAV2982 DELETING AN INDIVIDUAL ITEM ON THE MAP 1. Align the cross pointer over the preferred stored location for deletion by moving on the map. Then push <ENTER> . NAV2983 2. Highlight [Delete] and push <ENTER> . NAV2984 3. A confirmation message is displayed.
NAV3055 DELETING ALL ST ORED ITEMS 1. Push <SETTING> . 2. Highlight [Navigation] and push <ENTER> . NAV2930 3 . Highlight [Address Book] and push <ENTER> .
NAV2986 5. Highlight the preferred item for deletion and push <ENTER> . Items that can be deleted . Delete Home Location: Deletes the home location. . Delete Stored Locations: Deletes all stored locations. . Delete Stored Routes: Deletes all stored routes.
Y o u can change the cate gories used for searching Points of Interest nearby . The modified list of Points of Interest can be used for searching for a location using [Nearby Places]. “SETTING A NEARBY PLACE” (page 4- 42) NAV3055 1. Push <SETTING> .
NAV2989 4. Highlight the preferred item and push <ENTER> . The main category list is displayed. NAV2990 5 . Highlight a main category and push <ENTER> . The sub category list is displayed. NAV2991 6 . Highlight a sub category and push <ENTER> .
7 Viewing technical information Viewing information about current vehicle location ...... 7 - 2 Basic operation ............................................. 7 - 2 Viewing GPS current location information ................ 7 - 3 Basic operation .......
This allows you to display the information about the vehicle location on the route when driving according to route guidance. BASIC OPERA TION 1. Push <ROUTE> . 2. Highlight [Route Information] and push <ENTER> . 3 . Highlight [Where am I?] and push <ENTER> .
This allows you to display GPS information, such as the positioning status, latitude/longitude, altitude and satellite locations. BASIC OPERA TION 1. Push <SETTING> . 2. Highlight [Navigation] and push <ENTER> . 3. High light [GPS Sa tell ite In fo] an d push <ENTER> .
& 2 Latitude/Longitude: Displays the latitude/longitude. & 3 Approx Altitude: Displays the approximate altitude. & 4 Positioning status: (green) It indicates that satellites are available. (gray) It indicates that satellites are being searched for.
8 Other settings Settings screen ................................................. 8 - 2 Basic operation ............................................. 8 - 2 Display settings ............................................. 8 - 3 System settings screen ..
The navigation system can be customized to make it easier for you to use. BASIC OPERA TION 1. Push <SETTING> . 2. Highligh t the preferr ed setting item a nd push <ENTER> . NAV3056 Available setting items . Display: “DISPLA Y SETTINGS” (page 8-3) .
. Guidance V olume: Adjust the volume level of voice guidance by tilting the joystick in the direction of [+] or [ − ]. DISPLA Y SETTINGS This menu allows you to turn on and off the display and adjust the image quality. Basic operation 1. Highlight [Display] and push <ENTER> .
NAV3100 Display off T o turn off the display, push <ENTER> and turn the [Display off] indicator on, and hold < > (Day/Night) for more than 2 seconds. NAV3101 When any button is pushed with the display off, the display turns on. The display will automati- cally turn off 3 seconds after the operation is finished.
NAV3103 Contrast Adjust the display contrast by tilting the joystick in the direction of [+] or [ − ]. INFO: The preview of the map screen is displayed on the upper portion of the screen, if the previous screen showed a map. NAI0480 Map Background Push < > (Day/Night) to choose the back- ground color.
S Y STEM SETTINGS SCREEN Allows you to set system settings such as language/measurement unit setting. Basic operation 1. Push <SETTING> . 2 . Highlight [System Settings] and push <ENTER> . 3. Highlight the preferred adjustment item and push <ENTER> .
LANGUAGE AND UNIT SETTINGS This allows you to change the language and measurement unit used in the system. NAV3031 Language settings 1 . Highlight [Language/Units] and push <ENTER> . NAV3032 2. Highligh t the preferr ed setting item a nd push <ENTER> .
NAV3033 3. A message is displayed. Confirm the con- tents of the message. After confirming the message, highlight [Y es] and push <ENTER> . NAV3034 4. The program loading screen is displayed, and the system initiates language setting. Upon completion, the start-up screen is automatically displayed.
NAV3031 Unit settings 1 . Highlight [Language/Units] and push <ENTER> . NAV3035 2. Highlight [Unit] and tilt the joystick to the right or left or push <ENTER> to highlight the preferred unit. The indicator of the selected unit illuminates.
CL OCK SETTINGS This allows you to change the clock settings. Basic operation 1. Highlight [Clock] and push <ENTER> . 2. Highlight the preferred adjustment item. 3. Use the joystick to adjust to the preferred setting. 4. After setting, push <ENTER> or <BACK> to apply the setting.
. Select Time Zone: Select an appropriate time zone from the list that appears when you select this item. — Pacific — Mountain — Central — Eastern — Atlantic — Newfoundland Other settings .
This allows you to change the map color. 1. Push <SETTING> . NAV3005 2. Highlight [Navigation] and push <ENTER> . 3. Highlight [Map Color Settings] and push <ENTER> . NAV3006 4. Highlight the preferred map color and push <ENTER> .
If the vehicle icon indicating the current vehicle location is not located in the correct position, you can correct the position of the vehicle icon on the map screen. INFO: . Regardless of the map view setting, the map is displayed in Plan View when adjusting the position of the vehicle icon.
NAV3018 5. Adjust the direction of the vehicle icon using the joystick. After adjusting the direction of the vehicle icon, push <ENTER> . NAV3019 6.
This allows you to restore various setting s (display, volume level, etc.) to the default settings. INFO: The memory contents, such as the stored locations, will not be deleted. NAV3020 1. Push <SETTING> . 2. Highlight [Navigation] and push <ENTER> .
MEMO 8-16 Other settings.
9 General system information Features of this navigation system .......................... 9 - 2 Route guidance ............................................. 9 - 2 Points of Interest (POI) directory ........................ 9 - 2 Address book ........
ROUTE GUIDANCE The main features of the NISSAN Navigation System are visual guidance and voice guidance in selected map coverage areas. Utilizing a network of GPS (Global Positioning System) satellites, the NISSAN Navigation System tracks your location on the map and navigates you to a preferred location.
NAV2710 BIRDVIEW TM T wo map types, 2-dimensional Plan View and 3- dimensional Birdvie w TM , are available in the NISSAN Navigation System. Birdview TM dis- plays the map from an elevated perspective. In Birdview TM , it is easy to recognize an image of the route because it provides a panoramic view over a long distance.
NAV3046 ACCURACY OF POSITIONING The color of the GPS indicator in the lower right corner of the screen indicates the accuracy of positioning as follows: .
NAI0424 * Under multi-layered highways NAI0425 * Under many big trees NAI0503 * In a canyon INFO: The GPS antenna is located on the instrument panel inside the vehicle. Do not place any objects, especially mobile phones or transcei- vers, on the instrument panel.
INCORRECT DIS PLA Y OF VEHICLE POSITION The follow ing cases may aff ect the displa y accuracy of the vehicle’s position or traveling direction. The accuracy will return to normal if the driving conditions return to normal. NAI0426 * When there is a similar road nearby .
NAI0430 * When the vehicle is traveling on a road with repeating S-shaped curves. NAI0431 * When the vehicle is on a loop bridge. NAI0432 * When the vehicle i s on a snow-covered or unpaved road. NAI0433 * When repeatedly turning left or right, or driving in zigzags.
NAI0436 * When the GPS positioning accuracy is low. INFO: . The vehicle icon may be misaligned when starting the vehicle just after starting the engine. . The vehicle icon may also be misaligned if different sized tires or tire chains are installed. .
WHEN A GRA Y ROAD IS DISPLA YED ON THE MAP . When you are driving on a road displayed in gray after the vehicle has deviated from the suggested route during route guidance, automatic rerouting may not start immedi- ately. . The navigation system does not provide route guidance for roads displayed in dark green.
. If waypoints are set, the system calculates multiple routes between waypoints simulta- neously, and the following may result. — If one section between waypoints cannot be calculated, none of the route will be displayed. — The route may not connect completely at some waypoints.
INFO: The announcement of the street name during route guidance is available only when English is set as the language for the system. Street names are not announced if French is set for the system. BASICS OF VOICE GUIDANCE V oice guidance announces which direction to turn when approaching an intersection in which a turn is necessary.
NAI0437 Notification of an intersecti on on an ordinary road 1. “In about one quarter mile (400 meters) , right (left) turn.” 2. “Right (left) turn ahead.” NAI0438 Notification of consecuti ve intersections on an ordinary road When the road has three or more consecutive intersections ahead, voice guidance will an- nounce the following.
NAI0440 Notification of a freeway junction 1. “In about one mile (1.6 kilometers) , keep to the right (left) onto (road number and direction) , then in about one quarter mile (400 meters) keep to the right (left) .
Notification when approa ching the des- tination Ordinary road: When approaching the destination, voice gui- dance will announce, “Y ou have arrived at your destination. Ending route guidance.” T o finally reach your destination, refer to the map screen.
. The displayed street names may sometimes differ from the actual names, or “UN- KNOWN STREET NAME” may be dis- played. . V oice guidance is not available when the [Guidance V oice] indicator is not illuminated. . V oice guidance will start when the vehicle enters the suggested route.
END-USER TERMS The Map Data Disc (“Data”) is provided for your personal, internal use only and not for resale. It is protected by copyright, and is subject to the following terms (this “End- Use.
or in communication with vehicles capable of vehicle navigation, positioning, dispatch, real time route guidance, fleet management or similar applications; or (b) with, or in communication with, including without limitation, cellular phones, palmtop and handheld computers, pagers, and personal digital-assistants or PDAs.
defined at 48 C.F .R. (“FAR”) 2.101, is licensed in accordance with th is End-User License Agreement, and each copy of Data delivered or otherwise furnished shall be marked and embedded as appropr.
DISC REPLACEMENT CAUTION . The included map DVD-ROM is de- signed specifically for your navigation system. Do not use it in another system as it could cause a malfunc- tion. . Do not allow the system to get wet. Excessive moi sture, such as spilled liquids, may cause the system to malfunction.
NAI0451 HOW T O HANDLE THE DVD-ROM CAUTION . Handle a DVD-ROM by its edges. Never touch the surface of the disc . . T o clean a disc , wipe the surface from the center to the outer edge using a clean, soft cloth. Do not wipe the disc using a circular motion.
The display is a liquid crystal display and should be handled with care. WARNING Never disassemble the display. Some parts utilize extremely high voltage. T ouchi ng them may re sult in ser ious personal injury. CHARACTERISTICS OF A LIQUID CR YST AL DISPLA Y .
MEMO 9-22 General system information.
10 T roubleshooting guide Customer assistance ......................................... 1 0 - 2 Basic operations .............................................. 1 0 - 3 V ehicle icon .................................................... 1 0 - 4 Map DVD-ROM .
For assistance or inquiries about the NISSAN Navigation System, contact the NISSAN NA VI- GA TION S Y STEM HELPDESK. See the contact information on the inside front cover of this manual.
Symptom Possible cause Possible solution No image is displayed. The brightness is at the lowest setting. Adjust the brightness of the display. The display is turned off. Push and hold < > (Day/Night) to turn on the display. No voice guidance is available.
Symptom Possible cause Possible solution Names of roads and locations differ between Plan view and Birdview TM . This is because the quantity of the displayed information is reduced so that the screen does not become too crowded.
Symptom Possible cause Possible solution The location of the vehicle icon is misaligned from the actual position. When using tire chains or replacing the tires, speed calculations based on the speed sensor may be incorrect.
Symptom Possible cause Possible solution The message “Error” appears. The map DVD-ROM is dirty or damaged. Check the map DVD-ROM and wipe it clean with a soft cloth, following the cautions and instructions on page 9-20. If you see any damage, replace the map DVD-ROM.
Symptom Possible cause Possible solution W aypoints are not included in the auto reroute calculation. W aypoints tha t you have already passed are not included in the auto reroute calculation. If you want to go to that waypoint again, you need to edit the route.
Symptom Possible cause Possible solution An indirect route is sug gested. If there are restrictions (su ch as one-way streets) on roads close to the starting point or destination, the system may sugges t an indirect route. Adjust the location of the starting point or destination.
Symptom Possible cause Possible solution V oice guidance is not available. Voice guidance is only available at certain intersections marked with . In some cases, voice guidance is not available even when the vehicle should make a turn. This is not a malfunction.
MEMO 10-10 T roubleshooting guide.
11 Index CURRENT LOCA TION MAP SCREEN <ENTER> Store Location page 6-5 Nearby page 4-42 Map View Plan View page 3-4 Birdview TM page 3-4 Split (Plan View) page 3-4 Split (Birdview TM ) page 3-4 C.
SCROLL LOCA TION MAP SCRE EN <ENTER> New Dest Start page 5-3 More Routes page 5-3 Route Info page 5-4 Add Way Pt. page 5-5 Add to Route Edit Route page 5-19 Nearby page 4-42 Store Location page .
DESTINA TION SCREEN <DEST> Street Address page 4-3 Address Book Home Location page 4-20 Stored Location page 4-22 Previous Destinations page 4-24 Points of Interest page 4-28 Others Phone Number.
ROUTE SCREEN <ROUTE> Cancel Route Guidance page 5-35 Resume Route Guidance page 5-36 Change/Edit Route Detour page 5-17 Recalculate Route page 5-18 Edit Route page 5-19 Store Current Route page .
Guidance Settings Guidance Screen Default page 5-31 Route Guidance page 5-29 Guidance V oice page 5-29 Small T urn Arrow on Map page 5-29 V oice Announc ements page 5-32 Set Average Speeds page 5-33.
SETTING SCREEN <SETTING> Display Brightness/Contrast page 8-3 Display off page 8-4 System Settings Language/Units Language page 8-7 Unit page 8-9 Clock Hours page 8-10 Minutes page 8-10 Auto Adj.
Navigation Landmark Icons page 3-22 Map View page 3-4 Heading page 3-15 Guidance Settings page 5-29 Address Book Stored Location page 6-16 Stored Routes page 6-25 Stored T racking page 6-26 Avoid Area.
Avoid Area Settings page 6-7 T racking Display Settings page 6-26 Nearby Places Custom Settings page 6-33 Map Scrolling Information page 3-10 Map Color Settings page 8-12 Adjust Current Location page .
A About route guidance ............................... 5 - 7 About the map DVD-ROM ........................ 9 - 1 5 Accuracy of positioning ............................. 9 - 4 Adding a destination or waypoint ................... 5 - 5 Adding additional destinations to a route .
Map symbols ....................................... 3 - 2 4 Map types ............................................ 3 - 2 Menu screen types and how to operate ........... 2 - 4 Menu screens and their purposes .................. 2 - 4 Minor adjustment of the stored home and locations .
® 2011 NA VIGA TION S Y STEM OWNER’S MANU AL F or your saf ety , read carefully and k eep in this vehicle. 2011 NISS AN NA VIGA TION S Y S TEM 4NA V-N Printing : July 2010 (05) Publication No.
Een belangrijk punt na aankoop van elk apparaat Univex 2011 Titan (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Univex 2011 Titan heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Univex 2011 Titan vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Univex 2011 Titan leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Univex 2011 Titan krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Univex 2011 Titan bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Univex 2011 Titan kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Univex 2011 Titan . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
