Gebruiksaanwijzing /service van het product Combo (2012) van de fabrikant Vauxhall
Ga naar pagina of 179
0 - 1 Owner’s Manual Model Year 2013 Edition: August 2012 TS 17 14-A-13 VAUXHALL Combo Owner’s Manual Model Year 2013 Edition: August 2012 TS 1714-A-13.
Introduction .................................... 2 In brief ............................................ 6 Keys, doors and windows ............ 18 Seats, restraints ........................... 31 Storage ........................................ 48 Instruments and controls .
2 Introduction Introduction.
Introduction 3 Vehicle specific data Please enter your vehicle's data on the previous page to keep it easily accessible. This information is available in the sections "Service and maintenance" and "Technical data" as well as on the identification plate.
4 Introduction 9 Warning Text marked 9 Warning provides information on risk of accident or injury. Disregarding this information may lead to injury. Caution Text marked Caution provides information on possible damage to the vehicle. Disregarding this information may lead to vehicle damage.
Introduction 5.
6 In brief In brief Initial drive information Vehicle unlocking Unlocking with key Turn the key in the driver's door lock towards the front of the vehicle. Unlocking with radio remote control Press button Ä to unlock the doors and load compartment.
In brief 7 Seat adjustment Seat positioning Pull handle, slide seat, release handle. Seat position 3 32, Seat adjustment 3 32. 9 Danger Do not sit nearer than 25 cm from the steering wheel, to permit safe airbag deployment. Seat backrests Turn handwheel.
8 In brief Head restraint adjustment Press release catch, adjust height, engage. Head restraints 3 31. Seat belt Pull out the seat belt and engage in belt buckle. The seat belt must not be twisted and must fit close against the body. The backrest must not be tilted back too far (maximum approx.
In brief 9 Exterior mirrors Swivel lever in required direction. Select the relevant exterior mirror by turning the control to left _ or right 6 . Then swivel the control to adjust the mirror. In position o no mirror is selected. Convex exterior mirrors 3 26, Electric adjustment 3 26, Folding exterior mirrors 3 26, Heated exterior mirrors 3 27.
10 In brief Instrument panel overview.
In brief 11 1 Fixed air vents ....................... 92 2 Side air vents ........................ 91 3 Light switch .......................... 82 Turn and lane-change signals, headlight flash, low beam and high beam ..... 84 4 Instruments ...........
12 In brief Fog lights Press light switch > = front fog lights r = rear fog light Headlight flash, high beam and low beam headlight flash = pull lever high beam = push lever low beam = pull lever High beam 3 82, Headlight flash 3 82.
In brief 13 Hazard warning flashers Operated with the ¨ button. Hazard warning flashers 3 84. Horn Press j . Washer and wiper systems Windscreen wiper Twist lever: É = fast È = slow Ç = intermittent wiping § = off For a single wipe when the windscreen wiper is off, move the lever up.
14 In brief Windscreen and headlight washer systems Pull lever. Windscreen and headlight washer system 3 57, Washer fluid 3 121. Rear window wiper and washer systems Twist to activate the rear window wiper. The rear window wiper comes on automatically when the windscreen wiper is switched on and reverse gear is engaged.
In brief 15 Demisting and defrosting the windows Set the temperature control to V . Set fan to 4 . Set air distribution control to V . Cooling n on. Heated rear window Ü on.
16 In brief Starting off Check before starting off ■ Tyre pressure and condition 3 134, 3 168. ■ Engine oil level and fluid levels 3 119. ■ All windows, mirrors, exterior lighting and number plates are free from dirt, snow and ice and are operational.
In brief 17 Parking ■ Always apply the parking brake. Activate the manual parking brake without pressing the release button. Apply as firmly as possible on a downhill slope or uphill slope. Depress foot brake at the same time to reduce operating force.
18 Keys, doors and windows Keys, doors and windows Keys, locks ................................... 18 Doors ........................................... 22 Vehicle security ............................ 25 Exterior mirrors ............................ 26 Interior mirrors .
Keys, doors and windows 19 Radio remote control Used to operate: ■ Central locking system 3 20 ■ Anti-theft locking system 3 25 ■ Power windows 3 27 The radio remote control has a range of up to 5 metres. It can be restricted by external influences.
20 Keys, doors and windows replace the battery (type CR 2032), paying attention to the installation position. Refit the battery holder in the key and secure the screw. Central locking system Unlocks and locks doors and load compartment. A pull on an interior door handle unlocks the entire vehicle and opens the respective door.
Keys, doors and windows 21 Automatic locking The vehicle can be configured to automatically lock the doors when vehicle speed exceeds 12 mph. Driver Information Centre (DIC) 3 73. Unlocking the load compartment from inside the vehicle Press button Å : The load compartment (rear doors / tailgate and sliding side doors) are unlocked.
22 Keys, doors and windows Doors Sliding door Pull lever on interior handle and slide door. Caution Ensure the side door is fully closed and secure before driving the vehicle. Central locking system 3 20. Caution To avoid damage, do not attempt to operate the sliding side door when the fuel filler flap is open.
Keys, doors and windows 23 The door is opened from inside the vehicle by pressing down the interior handle. The right hand rear door is released using the lever. 9 Warning The rear lights may be obscured if the rear doors are open and the vehicle is parked on the roadside.
24 Keys, doors and windows Load compartment Tailgate Opening Press the button underneath the moulding. 9 Warning Do not drive with the tailgate open or ajar, e.
Keys, doors and windows 25 Vehicle security Anti-theft locking system 9 Warning Do not use the system if there are people in the vehicle! The doors cannot be unlocked from the inside. The system deadlocks all the doors. All doors must be closed otherwise the system cannot be activated.
26 Keys, doors and windows Exterior mirrors Convex shape The convex exterior mirror contains an aspherical area and reduces blind spots. The shape of the mirror makes objects appear smaller, which will affect the ability to estimate distances. Manual adjustment Adjust mirrors by swivelling lever in required direction.
Keys, doors and windows 27 Heated Operated by pressing the Ü button. Heating works with the engine running and is switched off automatically after a short time. Interior mirrors Manual anti-dazzle To reduce dazzle, adjust the lever on the underside of the mirror housing.
28 Keys, doors and windows Keep a close watch on the windows when closing them. Ensure that nothing becomes trapped in them as they move. Switch on ignition to operate power windows. Operate the switch for the respective window by pushing to open or pulling to close.
Keys, doors and windows 29 Child safety system for rear windows Press switch , to deactivate rear door power windows. To activate, press , again. Operating windows from outside The windows can be operated remotely from outside the vehicle when locking or unlocking the vehicle.
30 Keys, doors and windows Heated rear window Operated by pressing the Ü button. Heating works with the engine running and is switched off automatically after a short time. Sun visors The sun visors can be folded down or swivelled to the side to prevent dazzling.
Seats, restraints 31 Seats, restraints Head restraints ............................ 31 Front seats ................................... 32 Rear seats ................................... 34 Seat belts ..................................... 36 Airbag system .
32 Seats, restraints Head restraints on rear seats Height adjustment Pull the head restraint upwards or press the catch to release and push the head restraint downwards. Removal Press both catches, pull the head restraint upwards and remove. Note Approved accessories may only be attached if the seat is not in use.
Seats, restraints 33 9 Danger Do not sit nearer than 25 cm from the steering wheel, to permit safe airbag deployment. 9 Warning Never adjust seats while driving as they could move uncontrollably. Seat positioning Pull handle, slide seat, release handle.
34 Seats, restraints Armrest Raise or lower the armrest as required. Heating Activate heating by pressing ß button for the seat with the ignition on. LED in button ß on: relevant front seat heating on. Prolonged use for people with sensitive skin is not recommended.
Seats, restraints 35 ■ Pull the release lever and fold down the backrest onto the seat cushion. Pull the lower strap and fold the seat assembly forwards. ■ Secure the folded seat in the upright position by attaching the flexible cord located on the seat frame, to the rear seat head restraint.
36 Seats, restraints Replacing the seats ■ Attach the seat assembly front supports on the anchor points. ■ Push the release lever to ensure the seat is securely latched.
Seats, restraints 37 Seat belts are designed to be used by only one person at a time. Child restraint system 3 43. Periodically check all parts of the belt system for damage, pollution and proper functionality. Have damaged components replaced. After an accident, have the belts and triggered belt pretensioners replaced by a workshop.
38 Seats, restraints Loose or bulky clothing prevents the belt from fitting snugly. Do not place objects such as handbags or mobile phones between the belt and your body. 9 Warning The belt must not rest against hard or fragile objects in the pockets of your clothing.
Seats, restraints 39 Removing To release belt, press red button on belt buckle. Seat belts on the rear seats The seat belt for the rear centre seat can only be withdrawn from the retractor if the backrest is in the rear position.
40 Seats, restraints 9 Warning If handled improperly the airbag systems can be triggered in an explosive manner. Note The airbag systems and belt pretensioner control electronics are located in the centre console area. Do not put any magnetic objects in this area.
Seats, restraints 41 9 Warning Optimum protection is only provided when the seat is in the proper position 3 32. Keep the area in which the airbag inflates clear of obstructions. Fit the seat belt correctly and engage securely. Only then the airbag is able to protect.
42 Seats, restraints Deactivate the front passenger airbag system as follows: 1. Press the SET ESC button once to access the settings menu. 2. Press SET ESC again (repeatedly) to cycle through the menu functions until menu option Pass bag (in Standard version) - or - Passenger bag (in Multifunction version) is displayed.
Seats, restraints 43 Child restraints Child restraint systems We recommend the Vauxhall child restraint system which is tailored specifically to the vehicle. When a child restraint system is being used, pay attention to the following usage and installation instructions and also those supplied with the child restraint system.
44 Seats, restraints Child restraint installation locations Permissible options for fitting a child restraint system Weight and age class Front passenger seat Second row Third row activated airbag deactivated airbag outboard seat centre seat Group 0: up to 10 kg or approx.
Seats, restraints 45 Permissible options for fitting an ISOFIX child restraint system Weight class Size class Fixture On front passenger seat On outboard seats in the second row On centre seat in the .
46 Seats, restraints ISOFIX size class and seat device A – ISO/F3 = Forward-facing child restraint system for children of maximum size in the weight class 9 to 18 kg. B – ISO/F2 = Forward-facing child restraint system for smaller children in the weight class 9 to 18 kg.
Seats, restraints 47 ISOFIX child restraint systems Fasten vehicle-approved ISOFIX child restraint systems to the ISOFIX mounting brackets. Specific vehicle ISOFIX child restraint system positions are marked in the table by IL. ISOFIX mounting brackets are indicated by a label on the backrest.
48 Storage Storage Storage compartments ................ 48 Load compartment ....................... 50 Roof rack system ......................... 53 Loading information ..................... 54 Storage compartments Instrument panel storage Storage compartments are located in the instrument panel.
Storage 49 Glovebox To open the glovebox, pull the handle. Depending on version, the glovebox may be lockable. The glovebox should be closed whilst driving. Cupholders Cupholders are located in the centre console. The cupholders can also be used to hold the portable ashtray unit 3 61.
50 Storage Load compartment Folding down rear seat backrests The rear seat backrest is divided into two parts. Both parts can be folded down. Remove the load compartment cover if necessary. Press and hold the catch, then push the head restraints down.
Storage 51 Closing Pull the cover towards the rear using the handle and engage it in the retainers at the sides. Opening Remove load compartment cover from the retainers at the sides. Hold the cover and guide it until it is fully rolled up. Removing Open the load compartment cover.
52 Storage Rear parcel shelf The rear parcel shelf consists of two parts - a front part and rear part. The front part can be opened or closed, allowing for greater flexibility in the load compartment. Do not place any excessively heavy or sharp-edged objects on the rear parcel shelf.
Storage 53 To remove, lift the front part of the parcel shelf by releasing it from the front retainers ( 1 ) on both sides. Lift the rear part of the parcel shelf by releasing it from the rear retainers ( 2 and 3 ) on both sides. Installing Refit the parcel shelf by engaging in front and rear retainers on both sides.
54 Storage To fasten a roof rack, insert the mounting bolts in the holes indicated in the illustration. Loading information ■ Heavy objects in the load compartment should be evenly distributed and placed as far forward as possible. If objects can be stacked, the heavier objects should be placed at the bottom.
Storage 55 Optional equipment and accessories increase the kerb weight. ■ Driving with a roof load increases the sensitivity of the vehicle to cross-winds and has a detrimental effect on vehicle handling due to the vehicle's higher centre of gravity.
56 Instruments and controls Instruments and controls Controls ....................................... 56 Warning lights, gauges and indicators ..................................... 62 Information displays ..................... 73 Vehicle messages ....
Instruments and controls 57 Horn Press j . Windscreen wiper/washer Windscreen wiper Twist É = fast È = slow Ç = intermittent wiping § = off For a single wipe when the windscreen wiper is off, move the lever up. Do not use if the windscreen is frozen.
58 Instruments and controls Rear window wiper/washer Twist to activate the rear window wiper. Push lever. Washer fluid is sprayed onto the rear window and the wiper wipes a few times.
Instruments and controls 59 Set time in Driver Information Centre - Standard version 1. Press the SET ESC button once to access the settings menu. 2. Scroll through the menu options using the R or S buttons until HOUR is displayed. 3. Press SET ESC to access this menu option; the hours will flash in the display.
60 Instruments and controls To change the clock mode between 12 hour and 24 hour clock: 1. Press R or S to select Mode and press SET ESC to access this submenu option; the display will flash. 2. Press R or S to change clock mode between 12h and 24h. 3.
Instruments and controls 61 Long wheelbase van Combo Tour Do not exceed the maximum power consumption of 180 watts. With ignition off, the power outlets are deactivated. Additionally the power outlets are deactivated in the event of low battery voltage.
62 Instruments and controls The portable ashtray should be placed in the cupholders in the centre console. Warning lights, gauges and indicators Speedometer Indicates vehicle speed. Odometer Displays the recorded distance in miles. H may appear in the display until the vehicle has travelled 60 miles.
Instruments and controls 63 To reset the trip odometer, press and hold the TRIP button for a few seconds while the relevant trip odometer is displayed. Tachometer Displays the engine speed. Drive in a low engine speed range for each gear as much as possible.
64 Instruments and controls the cylinders. As the fuel level diminishes, the bars in the CNG fuel gauge disappear. CNG and the one remaining bar will flash if the methane level in the cylinders is low. Refuelling 3 112. Fuel selector Y illuminates in the Driver Information Centre.
Instruments and controls 65 3 73. Based on driving conditions, the interval at which a service will be indicated can vary considerably. When the remaining distance before the next service is less than 1,250 miles, Serv. appears in the Driver Information Centre.
66 Instruments and controls Control indicators in the instrument cluster.
Instruments and controls 67 Generic warning 9 illuminates yellow. Depending on model variant, control indicator 9 may illuminate independently or in conjunction with Æ , t , Z or r . If 9 illuminates together with I ; stop engine immediately and seek the assistance of a workshop.
68 Instruments and controls driving, there is a fault in the airbag system. Seek the assistance of a workshop. The airbags and belt pretensioners may fail to trigger in the event of an accident. Deployment of the belt pretensioners or airbags is indicated by continuous illumination of v .
Instruments and controls 69 Flashes when the engine is running Fault that could lead to catalytic converter damage. Ease up on the accelerator until the flashing stops. Seek the assistance of a workshop immediately. Brake system R illuminates red. Illuminates when the parking brake is released if the brake fluid level is too low 3 122.
70 Instruments and controls message may also be displayed in the Driver Information Centre (DIC) 3 73. Generic warning 9 3 67. Hill start assist 3 105. Ultrasonic parking assist r illuminates yellow. Fault in system or Fault due to sensors that are dirty or covered by ice or snow or Interference due to external sources of ultrasound.
Instruments and controls 71 Preheating ! illuminates yellow. Preheating is activated. Only activates when outside temperature is low. Diesel particle filter [ illuminates yellow. The diesel particle filter requires cleaning. Continue driving until [ extinguishes.
72 Instruments and controls Centre (DIC), to indicate that engine oil life has been diminished and the oil needs changing. Based on driving conditions, the interval at which an oil change will be indicated can vary considerably.
Instruments and controls 73 Depending on version, 9 will illuminate as an alternative if control indicator Æ is not present. A warning message may also be displayed in the Driver Information Centre (DIC) 3 73. Generic warning 9 3 67. Stop-start system 3 96.
74 Instruments and controls and a Multifunction version with further adjustable settings. Some of the displayed functions differ when the vehicle is being driven or at a standstill.
Instruments and controls 75 Press the R button to scroll up the screen and the menu options or to increase the displayed value. Press and hold to increase value rapidly (press again to stop on the required value). Press the S button to scroll down the screen and the menu options or to decrease the displayed value.
76 Instruments and controls BAG P (Passenger front and side airbags activation/deactivation) Activate the front passenger airbags if an adult is occupying the front passenger seat. Deactivate airbags when a child restraint system is installed on this seat.
Instruments and controls 77 Press the SET ESC button when activated ( On ) to access the current set speed. Adjust as required and confirm. Warning chimes 3 79. TRIP B DATA Activate or deactivate the second trip computer (set to On or Off ). Trip B records average consumption, distance travelled, average speed and travel time (driving time).
78 Instruments and controls BUTTON VOLUME A chime is sounded every time the SET ESC , R or S button is pressed. Adjust the volume of these chimes and confirm.
Instruments and controls 79 Vehicle messages Warning chimes Only one warning chime will sound at a time. When starting the engine or whilst driving ■ If seat belt is not fastened. ■ If a certain speed is exceeded with the parking brake applied. ■ If the parking assist detects an object.
80 Instruments and controls Trip computer The trip computer provides information on driving data, which is continually recorded and evaluated electronically.
Instruments and controls 81 The trip computer will reset automatically when the maximum value of any of the parameters is exceeded. Average consumption Average consumption is displayed, taking into consideration the distance travelled and the fuel used since the last reset.
82 Lighting Lighting Exterior lighting ............................ 82 Interior lighting ............................. 85 Exterior lighting Light switch Turn light switch: § = off / daytime running lights 9 = sidelights / headlights Control indicator 8 3 73.
Lighting 83 Headlight range adjustment Manual headlight range adjustment To adapt headlight range to the vehicle load to prevent dazzling: Press À or Á buttons until the required setting is displayed in the Driver Information Centre (DIC) 3 73.
84 Lighting Hazard warning flashers Operated with the ¨ button. Turn and lane-change signals Lever up = right turn signal Lever down = left turn signal If the lever is moved past the resistance point, the turn signal is switched on constantly. When the steering wheel moves back, the turn signal is automatically deactivated.
Lighting 85 Rear fog lights Operated with the r button. The rear fog light can only be switched on when both the ignition and headlights or sidelights (with front fog lights) are on. Press the button again to turn the rear fog light off, or turn off the headlights and/or the front fog lights.
86 Lighting Multifunction version of DIC 1. Press the SET ESC button to access the settings menu. 2. Scroll through the menu options using the R or S buttons until menu option LIGHTING appears in the display. 3. Press the R or S button to increase or decrease the displayed value.
Lighting 87 Rear courtesy lights Centre switch position: automatic interior light. To operate manually when the doors are closed, press the lens on either side. Load compartment lighting Depending on model variant, load compartment lighting switches on when the rear doors / tailgate or sliding side door is opened.
88 Climate control Climate control Climate control systems ............... 88 Air vents ....................................... 91 Maintenance ................................ 92 Climate control systems Heating and ventilation system Controls for: ■ Temperature ■ Fan speed ■ Air distribution Heated rear window Ü 3 30.
Climate control 89 ■ Open side air vents as required and direct them towards door windows. ■ For simultaneous warming of the foot well, set air distribution control to J .
90 Climate control Electronic climate control system Controls for: ■ Temperature ■ Air distribution and menu selection ■ Fan speed AUTO = Automatic mode 4 = air recirculation Ê = demisting and defrosting OFF = switch on/off Heated rear window Ü 3 30.
Climate control 91 Demisting and defrosting the windows Press the Ê button. Temperature and air distribution are set automatically and the fan runs at a high speed. When the vehicle reaches normal operating temperature the function remains active for approx.
92 Climate control Slide knob to the left to open vent. Direct the flow of air by swivelling the vent. Slide knob to the right to close vent. Side air vents Slide knob to the left to open vent. Direct the flow of air by swivelling the vent. Slide knob to the right to close vent.
Climate control 93 Air conditioning regular operation In order to ensure continuously efficient performance, cooling must be operated for a few minutes once a month, irrespective of the weather and time of year. Operation with cooling is not possible when outside temperature is too low.
94 Driving and operating Driving and operating Driving hints ................................. 94 Starting and operating ................. 94 Engine exhaust ............................ 98 Manual transmission .................. 100 Manual transmission automated .
Driving and operating 95 Ignition switch positions STOP = Steering wheel lock released, ignition off MAR = Ignition on, for diesel engine: preheating AVV = Starting Starting the engine Manual transmission: operate clutch. Do not operate the accelerator pedal.
96 Driving and operating Note In addition, the vehicle is automatically unlocked and the interior lights are illuminated. Turn the ignition key to position STOP to prevent battery discharge and seek the assistance of a workshop immediately.
Driving and operating 97 Deactivate the stop-start system manually by pressing the ^ button in the centre console. LED in the button illuminates to confirm deactivation.
98 Driving and operating The selector lever must be in neutral to enable an automatic restart. Depress the clutch pedal to restart the engine. Manual transmission automated If the lever is in position N , select another gear, otherwise release the brake pedal or move the lever to + , – or R .
Driving and operating 99 take up to 25 minutes. Typically it needs 15 minutes. Autostop is not available and fuel consumption may be higher during this period. The emission of smells and smoke during this process is normal. Under certain driving conditions, e.
100 Driving and operating Manual transmission To engage reverse, with the vehicle stationary, wait 3 seconds after depressing the clutch pedal, pull up the collar on the selector lever and engage the gear. If the gear does not engage, set the lever to neutral, release the clutch pedal and depress again; then repeat gear selection.
Driving and operating 101 Starting the engine Depress the foot brake when starting the engine. If the foot brake is not depressed, a warning message appears in the Driver Information Centre (DIC) in conjuction with a warning chime 3 79 and the engine cannot be started.
102 Driving and operating start off quickly, release the foot brake and accelerate immediately after engaging a gear. Move the selector lever towards A/M to engage automatic mode; the transmission shifts to other gears automatically, dependent on driving conditions.
Driving and operating 103 Manual mode If engine speed is too low, the transmission automatically shifts to a lower gear. In manual mode, no automatic shifting to a higher gear takes place at high engine revolutions. If engine speed is too high, the transmission only switches to a higher gear via kickdown.
104 Driving and operating If engine speed is too high the transmission switches to a higher gear, even in manual mode. Without kickdown this automatic shift is not effected in manual mode. Fault In the event of a fault, control indicator Ñ is shown in the transmission display.
Driving and operating 105 hard braking, the vehicle can no longer be steered and may swerve. Have the cause of the fault remedied by a workshop. Parking brake Manual parking brake Always apply parking brake firmly without operating the release button, and apply as firmly as possible on a downhill or uphill slope.
106 Driving and operating Ride control systems Traction Control system The Anti-Slip Regulator (ASR) is a component of the Electronic Stability Control system. ASR improves driving stability when necessary, regardless of the type of road surface or tyre grip, by preventing the drive wheels from spinning.
Driving and operating 107 considerably improves the driving stability of the vehicle on slippery road surfaces. ESP is operational as soon as control indicator x extinguishes.
108 Driving and operating Switching on Turn end of lever ON , control indicator m illuminates in the instrument cluster in conjunction with a message in the driver information centre. Activation Accelerate to the desired speed and push lever upwards + , the current speed is stored and maintained.
Driving and operating 109 System operation The parking assist is turned on automatically when reverse gear is engaged. The intervals between the beeps become shorter as the vehicle gets closer to the obstacle. When the distance is less than 30 cm, the beeping is a continuous tone which stops immediately when the distance is increased.
110 Driving and operating Caution Performance of the sensor can be reduced when sensors are covered, e.g. by ice or snow. Performance of the parking assist systems can be reduced due to heavy loading. Special conditions apply if there are taller vehicles involved (e.
Driving and operating 111 Caution Do not use fuel or fuel additives that contain metallic compounds such as manganese-based additives. This may cause engine damage. Caution Use of fuel that does not comply to EN 228 or E DIN 51626-1 or equivalent can lead to deposits or engine damage and may affect your warranty.
112 Driving and operating Pressing button Y in the centre console switches between petrol and natural gas operation. The LED 1 status shows the current operating mode. 1 off = natural gas operation. 1 illuminates = petrol operation. As soon as the natural gas tanks are empty, petrol operation is automatically engaged.
Driving and operating 113 Note Depending on model, the sliding side door may be fitted with a safety system that prevents the door from being opened fully when the fuel filler flap is open. Sliding side door 3 22. The fuel filler cap can be retained in the bracket on the fuel filler flap.
114 Driving and operating Terms for " natural gas " abroad: German Erdgas English CNG = Compressed Natural Gas French GNV = Gaz Naturel (pour) Véhicules - or - CGN = carburantgaz naturel Italian Metano (per auto) Fuel filler cap Only use genuine fuel filler caps.
Driving and operating 115 Towing General information Only use towing equipment that has been approved for your vehicle. Vehicles with natural gas engine may require special towing equipment. Entrust retrofitting of towing equipment to a workshop. It may be necessary to make changes that affect the cooling system, heat shields or other equipment.
116 Driving and operating The maximum permissible vertical coupling load (75 kg) is specified on the towing equipment identification plate and in the vehicle documents. Always aim for the maximum load, especially in the case of heavy trailers. The vertical coupling load should never fall below 25 kg.
Vehicle care 117 Vehicle care General Information ................... 117 Vehicle checks ........................... 118 Bulb replacement ....................... 124 Electrical system ........................ 130 Vehicle tools ........................
118 Vehicle care ■ Open the bonnet, close all doors and lock the vehicle. ■ Disconnect the clamp from the negative terminal of the vehicle battery.
Vehicle care 119 9 Danger The ignition system uses extremely high voltage. Do not touch. Bonnet Opening Pull the release lever and return it to its original position. Push the safety catch and open the bonnet. Secure the bonnet support. Closing Lower the bonnet and allow it to drop into the catch.
120 Vehicle care Insert dipstick to the stop on the handle and make half a turn. When the engine oil level has dropped to the MIN mark, top up engine oil. We recommend the use of the same grade of engine oil that was used at last change. The engine oil level must not exceed the MAX mark on the dipstick.
Vehicle care 121 If the cooling system is cold, the coolant level should be between the MIN and MAX mark. Top up if the level is low. 9 Warning Allow the engine to cool before opening the cap. Carefully open the cap, relieving the pressure slowly. To top up use a 1:1 mixture of released coolant concentrate mixed with clean tap water.
122 Vehicle care Brakes A squealing noise, or illumination of brake pad wear control indicator F indicates that the brake lining is at its minimum thickness. Continued driving is possible but have the brake linings replaced as soon as possible. Once new brake linings are installed, do not brake unnecessarily hard for the first few journeys.
Vehicle care 123 The anti-theft alarm siren must be deactivated as follows: Switch the ignition on then off, disconnect the vehicle's battery within 15 seconds. Replacing the battery Note Any deviation from the instructions given in this paragraph may lead to a temporary deactivation of the stop- start system.
124 Vehicle care Wiper blade on tailgate Lift wiper arm, press retaining clips to detach wiper blade. Attach the wiper blade to the wiper arm and push until it engages. Lower wiper arm carefully. Bulb replacement Switch off the ignition and switch off the relevant switch or close the doors.
Vehicle care 125 5. Attach connector to bulb. 6. Engage wire clip. 7. Install protective cover. High beam 1. Remove protective cover. 2. Detach connector from bulb. 3. Disengage wire clip and remove bulb from reflector. 4. Insert new bulb in reflector so that the bulb aligns with the reflector recess.
126 Vehicle care 2. Withdraw bulb holder from reflector by turning anticlockwise. 3. Push bulb into holder slightly, rotate anticlockwise, remove and renew bulb. 4. Insert bulb holder in reflector. 5. Rotate clockwise to engage. 6. Install protective cover.
Vehicle care 127 Brake light ( 1 ) Turn signal light ( 2 ) Tail light ( 3 ) Tail light/fog light ( 4 ) 7. Install seal on bulb holder ensuring it is fitted correctly. Install bulb holder in light housing ensuring that it engages properly. Tighten four retaining screws using a screw driver.
128 Vehicle care 2. Turn the bulb holder anticlockwise to remove from the bulb housing. Remove the bulb by pulling. 3. Replace the bulb. 4. Insert bulb holder in bulb housing and rotate clockwise 5. Install the bulb housing ensuring it engages correctly.
Vehicle care 129 Front courtesy light, reading lights 1. Remove lens using a flat blade screwdriver. 2. Open the rear cover. 3. Renew bulbs. 4. Close rear cover. 5. Reinstall lens. Removable rear courtesy light 1. Press the button at the top of the lamp assembly to release it and pull down gently to remove.
130 Vehicle care Electrical system Fuses Data on the replacement fuse must match the data on the defective fuse. There are two fuse boxes in the vehicle: ■ on the right of the engine compartment, ne.
Vehicle care 131 Place the fuse extractor on the various types of fuse from the top or side, and withdraw fuse. Engine compartment fuse box The fuse box is on the right of the engine compartment, next to the battery. To remove the protective cover and access the fuses, remove the two screws (see illustration).
132 Vehicle care No. Circuit F09 Rear door switch F10 Horn F14 High beam F15 PTCI heater F19 Air conditioning system F20 Heated rear window F21 Fuel pump F30 Fog lights F84 CNG system F85 Power outlets F86 Cigarette lighter, heated seats F87 Stop-start system F88 Mirror heating After having changed defective fuses refit the fuse box cover.
Vehicle care 133 No. Circuit F12 Right low beam F13 Left low beam, headlight range adjustment F31 Fusebox relays, body control unit relays F32 Courtesy lights F36 Diagnostic connector, climate control.
134 Vehicle care Combo Tour The tools and the vehicle jacking equipment are in the load compartment. Wheels and tyres Tyre condition, wheel condition Drive over edges slowly and at right angles if possible. Driving over sharp edges can cause tyre and wheel damage.
Vehicle care 135 Unscrew the valve cap. Tyre pressure 3 168 and on the label on the door frame. The tyre pressure data refers to cold tyres. It applies to summer and winter tyres.
136 Vehicle care Wheel covers Wheel covers and tyres that are factory approved for the respective vehicle and comply with all of the relevant wheel and tyre combination requirements must be used. If the wheel covers and tyres used are not factory approved, the tyres must not have a rim protection ridge.
Vehicle care 137 The tyre repair kit is on the right side in the load compartment behind a cover. 1. Take the tyre repair kit from the vehicle. 2. Remove the compressor. 3. Set the compressor upright near the tyre. 4. Unscrew valve cap from defective tyre.
138 Vehicle care 5 minutes, the tyre is too badly damaged. Seek the assistance of a workshop. Do not run the compressor longer than 20 minutes. 11. Detach the tyre repair kit. 12. Remove any excess sealant using a cloth. 13. Take the label indicating maximum permitted speed from the sealant bottle and affix in the driver's field of view.
Vehicle care 139 2. Turn the canister anticlockwise to lift it out. 3. Insert the new canister and turn it clockwise. 4. Connect the compressor air hose to the canister and fit the flexible filler tube into its allocated space. Wheel changing Some vehicles are equipped with a tyre repair kit instead of a spare wheel 3 136.
140 Vehicle care 2. Attach wheel wrench securely and loosen each wheel nut by half a turn. 3. Vehicle jacking points are located at the front and rear. 4. Set the jack to the necessary height. Position it directly below the jacking point in a manner that prevents it from slipping.
Vehicle care 141 Spare wheel Some vehicles are equipped with a tyre repair kit 3 136 instead of a spare wheel. The spare wheel can be classified as a temporary spare wheel depending on the size compared to the other mounted wheels and country regulations.
142 Vehicle care 4. Withdraw spare wheel from beneath the vehicle. 5. Unscrew knob 2 and release cable attachment 1 from spare wheel. 6. Change the wheel. 7. Position the replaced wheel at the rear of the vehicle with the outside of the wheel facing downwards.
Vehicle care 143 2. Change the wheel. 3. Position the replaced spare wheel onto the bracket ensuring correct alignment of the locating pin. 4. Secure spare wheel by tightening two bolts using the wheel wrench. Have the defective tyre renewed or repaired as soon as possible.
144 Vehicle care ■ A discharged battery can already freeze at a temperature of 0 °C. Defrost the frozen battery before connecting jump leads. ■ Wear eye protection and protective clothing when handling a battery. ■ Use a booster battery with the same voltage (12 Volts).
Vehicle care 145 4. Switch on electrical consumers (e.g. headlights, heated rear window) of the vehicle receiving the jump start. 5. Reverse above sequence exactly when removing leads. Towing Towing the vehicle Release the cap by carefully lifting with a screwdriver.
146 Vehicle care To prevent the entry of exhaust gases from the towing vehicle, switch on the air recirculation and close the windows. Seek the assistance of a workshop. After towing, unscrew the towing eye and replace the cap. Towing another vehicle Insert a screwdriver in the slot at the side of the cap.
Vehicle care 147 If using a vehicle wash, comply with the vehicle wash manufacturer's instructions. The windscreen wiper and rear window wiper must be switched off. Remove antenna and external accessories such as roof racks etc. If you wash your vehicle by hand, make sure that the insides of the wheel housings are also thoroughly rinsed out.
148 Vehicle care Clean rims with a pH-neutral wheel cleaner. Rims are painted and can be treated with the same agents as the body. Paintwork damage Rectify minor paintwork damage with a touch-up pen before rust forms. Have more extensive damage or rust areas repaired by a workshop.
Vehicle care 149 Plastic and rubber parts Plastic and rubber parts can be cleaned with the same cleaner as used to clean the body. Use interior cleaner if necessary. Do not use any other agent. Avoid solvents and petrol in particular. Do not use high- pressure jet cleaners.
150 Service and maintenance Service and maintenance General information ................... 150 Recommended fluids, lubricants and parts ..............
Service and maintenance 151 Recommended fluids, lubricants and parts Recommended fluids and lubricants Only use products that meet the recommended specifications. Damage resulting from the use of products not in line with these specifications will not be covered by the warranty.
152 Service and maintenance temperatures the factory filled coolant provides frost protection down to approx. -37°C. This concentration should be maintained all year round. The use of additional coolant additives that intend to give additional corrosion protection or seal against minor leaks can cause function problems.
Technical data 153 Technical data Vehicle identification .................. 153 Vehicle data ............................... 154 Vehicle identification Vehicle Identification Number The Vehicle Identification Number is visible through the windscreen and in the floor on the front passenger side behind a cover.
154 Technical data Information on identification label: 1 = Type approval number 2 = Vehicle Identification Number 3 = Vehicle type identification code 4 = Permissible gross vehicle weight rating in k.
Technical data 155 Engine oil viscosity grades Engine oil viscosity grade Petrol / CNG engines Diesel engines SAE 0W-30 - ✔ SAE 0W-40 ✔ -.
156 Technical data Engine data Sales designation 1.4 1.4 1.4 Engine identifier code 1.4i 1.4Turbo 1.4CNG Number of cylinders 4 4 4 Piston displacement [cm 3 ] 1368 1368 1368 Engine power [kW] 70 88 88.
Technical data 157 Sales designation 1.4 1.4 1.4 Engine identifier code 1.4i 1.4Turbo 1.4CNG Number of cylinders 4 4 4 Piston displacement [cm 3 ] 1368 1368 1368 Engine power [kW] 70 88 88 at rpm 6000.
158 Technical data Sales designation 1.4 1.4 1.4 Engine identifier code 1.4i 1.4Turbo 1.4CNG Number of cylinders 4 4 4 Piston displacement [cm 3 ] 1368 1368 1368 Engine power [kW] 70 88 88 at rpm 6000.
Technical data 159 Sales designation 1.3 Turbo 1.6 Turbo 2.0 Turbo Engine identifier code 1.3CDTI 1.6CDTI 1) 2.0CDTI Number of cylinders 4 4 4 Piston displacement [cm 3 ] 1248 1598 1956 Engine power [.
160 Technical data Performance The maximum speed indicated is achievable at kerb weight (without driver) plus 200 kg payload. Optional equipment could reduce the specified maximum speed of the vehicle. Engine 1.4i 1.4Turbo 1.4CNG Maximum speed [mph] Manual transmission 100 107 107 Manual transmission automated – – – Engine 1.
Technical data 161 Vehicle weight Kerb weight, basic model - Van Length Roof height Engine Gross vehicle weight Kerb weight L1 H1 1.4i 1990 / 2160 1240 / 1260 1.4Turbo – / 2325 – / 1400 1.4Turbo CNG 2430 / – 1450 / – 1.3CDTI 2020 / 2290 1270 / 1290 1.
162 Technical data Length Roof height Engine Gross vehicle weight Kerb weight L2 H1 1.4i 2200 / – 1300 / – 1.4Turbo 2365 / – 1440 / – 1.4Turbo CNG 2470 / 2450 1490 / 1540 1.3CDTI 2330 / – 1330 / – 1.6CDTI 2370 / – 1370 / – 2.0CDTI 2410 / – 1410 / – H2 1.
Technical data 163 Kerb weight, basic model - Combi Length Roof height Engine Gross vehicle weight Kerb weight L1 H1 1.4i 2060 1350 1.4Turbo 2225 1500 1.3CDTI 2090 1380 1.6CDTI 2130 1420 2.0CDTI 2170 1460 H2 1.4i 2160 1360 1.3CDTI 2190 1390 1.6CDTI 2230 1430 2.
164 Technical data Kerb weight, basic model - Combo Tour Length Roof height Engine Gross vehicle weight Kerb weight L1 H1 1.4i 1940 1340 1.4Turbo 2030 1490 1.4Turbo CNG 2110 1540 1.3CDTI 1970 1370 1.6CDTI 2010 1410 2.0CDTI 2050 1450 H2 1.4i 2210 1430 1.
Technical data 165 Vehicle dimensions Type Van Combi Combo Tour Wheelbase Short Long Short Long Short Long Length [mm] 4390 4740 4390 4740 4390 4740 Width without exterior mirrors [mm] 1832 1832 1832 .
166 Technical data Type Van Combi Combo Tour Wheelbase [mm] 2755 3105 2755 3105 2755 3105 Turning circle kerb to kerb [m] 11.2 12.5 11.2 12.5 11.2 12.5.
Technical data 167 Capacities Engine oil Engine 1.4i 1.4Turbo 1.4CNG 1.3CDTI 1.6CDTI 2.0CDTI including Filter [l] 2.7 2.9 2.7 3.2 4.9 4.9 between MIN and MAX [l] 1.0 1.0 1.0 1.0 1.0 1.0 Fuel tank Petrol/diesel, nominal capacity [l] 60 Natural gas CNG, nominal capacity [kg] Petrol, nominal capacity [l] 16.
168 Technical data Tyre pressures Van Comfort with up to 2 people and 100 kg luggage With full load Engine Tyres front rear front rear [ kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) All 185/65 R15 88T 250/2.5 (36) 250/2.5 (36) 290/2.
Technical data 169 Combi Comfort with up to 3 people With full load Engine Tyres front rear front rear [ kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) All 185/65 R15 88T 250/2.5 (36) 250/2.5 (36) 290/2.9 (42) 290/2.9 (42) 185/65 R15 92T 250/2.
170 Technical data Combo Tour Comfort with up to 3 people With full load Engine Tyres front rear front rear [ kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) All 185/65 R15 88T 250/2.5 (36) 250/2.5 (36) 290/2.9 (42) 290/2.9 (42) 185/65 R15 92T 250/2.
Customer information 171 Customer information Vehicle data recording and privacy ....................................... 171 Vehicle data recording and privacy Event data recorders Data storage module.
172 Customer information When using the vehicle, situations may occur in which technical data related to other information (accident report, damages on the vehicle, witness statements etc.) may be associated with a specific person - possibly, with the assistance of an expert.
Customer information 173.
174 Index A Accessories and vehicle modifications .......................... 117 Adjustable air vents ..................... 91 Airbag activation ........................... 73 Airbag and belt tensioners ........... 67 Airbag deactivation .......... 41, 68, 73 Airbag system .
175 Control of the vehicle ................... 94 Controls ........................................ 56 Convex shape .............................. 26 Coolant and antifreeze ............... 151 Cruise control ...................... 73, 107 Cupholders .
176 Hill start assist ...................... 69, 105 Horn ....................................... 13, 57 I Identification plate ..................... 153 Ignition switch positions ............... 95 Immobiliser ............................ 25, 72 Indicators .
177 Rear fog light ............................... 73 Rear fog lights ............................. 85 Rear parcel shelf .......................... 50 Rear windows .............................. 29 Rear window wiper/washer .......... 58 Recommended fluids and lubricants .
178 Vehicle shutdown ................... 79, 95 Vehicle specific data ...................... 3 Vehicle storage ........................... 117 Vehicle tools ............................... 133 Vehicle unlocking ........................... 6 Vehicle weight .
Een belangrijk punt na aankoop van elk apparaat Vauxhall Combo (2012) (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Vauxhall Combo (2012) heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Vauxhall Combo (2012) vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Vauxhall Combo (2012) leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Vauxhall Combo (2012) krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Vauxhall Combo (2012) bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Vauxhall Combo (2012) kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Vauxhall Combo (2012) . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
