Gebruiksaanwijzing /service van het product M6 van de fabrikant VDO
Ga naar pagina of 87
www .vdoc yc lecomputing.com/ser vice ENGLISH Installation video Operating video Settings video.
2 M6 Preface P ack contents Congratulations In choosing a VDO computer , you have opted for high-quality device with first rate technology . T o optimally use the computer , we recommend that you read this manual carefully . It contains full operating instructions and many useful tips.
3 M6 T able of contents Display .................................................................. 04 Buttons ................................................................. 07 Functions ..............................................................
4 M6 Display The VDO M6 has a large, easy-to-read display that can be divided into six areas. Area 1: The altitude is permanently displayed on the left of the top line of the display . Area 2: The temperature is permanently displayed on the right. If the heart rate function is selected: the gradient uphill/downhill is displayed.
5 M6 Display On the right of the display , under the speed indicator , the unit kmh or mph is displayed. The active bike is also shown in this area. “ ” The VDO M6 can be used on two bikes. The indicator icons 1 and 2 show you whether your VDO M6 is currently using the settings for bike 1 or bike 2.
6 M6 Display The following icons are shown on the left of the display next to the gradient uphill percentage: “ ”: the icon is ON if the trip section counter has been started. A more detailed description of the trip section counter can be found on page 65.
7 M6 Buttons The VDO M6 has four buttons. SET In function mode: – Scroll backwards through the functions – Open the setting mode (press and hold) – Access the total values for distance and ride .
8 M6 Functions The VDO M6 has the following functions: Current speed The current speed is permanently shown on the display . For a wheel circumference of 2,155 mm, the maximum possible speed is 199 kmh or 124 mph. Current altitude The current altitude is permanently displayed on the top left.
9 M6 Functions Press the BIKE button to access the following information: Current distance The current distance counts up to 9,999.99 km or miles. If this value is exceeded, the current distance count restarts at zero. Current gr adient uphill/downhill A TTENTION: if the HEART RA TE option is activa ted, the current heart rate is displayed here.
10 M6 Functions Section time The VDO M6 has a trip section counter . The trip section counter is like a stopwatch. If the trip section counter is running, the section time is recorded, as with a stopwatch. When the trip section counter is running, the section distance is also recorded.
11 M6 Functions Time The current time is displayed in 24 H or 12 H mode. Information on how to set the time can be found on pa ge 40. AL TI button functions Press the AL TI button to access the altitude information for the current trip: Elevation profile for the curr ent trip The elevation profile for a section of the current trip is displayed.
12 M6 AL TI button functions Maximum gradient uphill Displays the maximum gradient uphill so far on the current trip. Uphill distance Displays the uphill distance travelled on the current trip. Altitude loss Displays the altitude loss on the current trip.
13 M6 AL TI button functions Downhill distance Displays the downhill distance travelled on the current trip. T otal distance 1 (total for all trips on bike 1) The total distance counts up to 99,999 km or miles. If this value is exceeded, the total distance counter restarts at zero.
14 M6 Accessing the total values Maximum altitude of all trips with bike 1 Displays the maximum altitude you have reached on all trips with bike 1. Altitude gain – totals Displays the total altitude gain for all trips with bike 1. Uphill distance – totals Displays the total uphill distance you have ridden on bike 1.
15 M6 Accessing the total values If you ha ve also used bike 2, the values for bike 2 ar e also displayed her e. Press the TPC (TO T AL/PULSE/ CAD) button to scroll to the other values for bike 2. Y ou can also access the total values (sum of the data for bike 1 and bike 2).
16 M6 Accessing the total values OPTION 2: Press and hold the SET button until the menu opens. – Press the BIKE or TPC button to scroll to the total values. – Press the SET button to open the total values display . – Press the BIKE or TPC button to scroll in the total values.
17 M6 1x BIKE TPC SET AL TI Operation while cycling While cyc ling, the display functions can be accessed by pressing the BIKE button and the AL TI button ( scroll forwar ds through the functions). Pressing the BIKE or AL TI button shows the next function on the display .
18 M6 90° 3 3 4 4 1 2 1 Attaching the handlebar bracket Y ou can attach the computer to the right or left of the handlebars or in the centre on the stem. Attach the handlebar bracket in the corresponding position. STEP 1 Decide whether you want to attach the computer to the handlebars or the stem.
19 M6 90° ° ✔ ✘ MAGNET Attaching the speed transmitter The transmitter can be attached to the fork leg on the right or left. Note: If you hav e attached the computer to the stem or the left of the handlebars, the speed transmitter MUST be attached to the LEFT fork leg.
20 M6 . L OCK . CLICK . UNL OCK UNL OCK L OCK Inserting the computer into the handlebar bracket The VDO twist-click system securely connects the computer to the handlebar bracket. How to insert the computer: STEP 1 Place the computer into the bracket in a 10 o’clock position.
21 M6 Function testing Once the transmitter is attached, check that it functions correctly . How to test the transmitter: – Insert the computer into the bracket. The speed indicator flashes. The computer now searches for its speed transmitter . – Lift and spin the front wheel.
22 M6 Settings – language The following display languages can be selected for the VDO M6: – German – English – French – Italian – Spanish – Dutch How to select the language: Press and hold the SET button until the settings menu opens. The first thing to appear is MEMORY .
23 M6 Settings – language Y ou can now press the BIKE button to select a different language. Press the SET button to confirm your language setting. The response “Set OK” appears on the display . If you want to configure further settings, press the BIKE button to access these.
24 M6 Settings – Dimension Use the unit settings to specify the measurement formats for: – Speed (kmh or mph) – Altitude (metres or feet) – T emperature (C or F) – W eight (kg or lbs) – T .
25 M6 Settings – Dimension The setting for the unit weight now appears on the display . KG or LBS (POUNDS) can be selected. Press the BIKE button to make the selection. Press the SET button to confirm the selection. The setting for the date format now appears on the display .
26 M6 1x Y ou can set the roll circumference of your wheel in millimetres on the VDO M6 or select the applicable tyres from a tyres table. The more accurate this setting, the more accurate your speed indicator and the measurement of the distance you have travelled.
27 M6 Settings – wheel circumference/wheel size How to set your wheel circumfer ence: Press and hold the SET button until the settings menu opens. Press the BIKE button to move from Memory to Settings. Press the SET button to open the settings. “Language” appears on the display .
28 M6 Settings – wheel circumference/wheel size Manual setting by entering the r oll circumference in millimetres The first two digits (in the example “21”) flash. Press the BIKE or TPC button to set these digits to the desired value. Press the SET button to confirm your setting.
29 M6 Settings – wheel circumference/wheel size Setting the wheel size using the tyre list Open the wheel size settings via the tyres list by pressing the SET button (see previous page). Press the BIKE or TPC button to scroll through the tyre list until your tyres are displayed (in the example shown 29 x 2.
30 M6 Settings – my data Use the My data settings to set your data for your age, weight, gender , HR max for the heart rate measurement and lower/upper limits for the heart rate training zone. How to set your My data information: Press and hold the SET button until the settings menu opens.
31 M6 Settings – my data The HR max calculated on the basis of your data is no w displayed. HR max is the maximum heart rate value that you should not exceed while training. If you know your HR max, you can set the value here. If you do not know the value, you should work with the calculated value.
32 M6 Settings – sensor selection The M6 can display heart rate and (simultaneously) cadence data. T o do this, a heart rate and/or cadence transmitter must be available and installed. Use the sensor selection menu to select the sensor that should be activated.
33 M6 Settings – sensor selection Press the SET button to confirm the selection. The response “Set OK” appears on the display . If you want to configure further settings, press the BIKE or TPC button to access these. If you do not want to configure any further settings, press and hold the SET button .
34 M6 Settings – heart rate intensity zones Now press the BIKE or TPC button to select the setting for intensity zones 1 to 4 . Press the SET button to confirm the selection. The setting for the selected intensity zone is opened. The value to be set (lower zone limit) flashes on the left .
35 M6 Settings – heart rate intensity zones Y ou can now adjust the next intensity zone (e.g. zone 2). The intensity zones are predefined. Y ou can individually adapt each of the intensity zones to your training requirements. Press the BIKE button to increase the value and the TPC button to decrease the value.
36 M6 Settings – start altitude Y ou can enter two different start altitudes on the M6. Start altitude 1 can be your home start altitude, for example.
37 M6 Settings – start altitude Once the correct start altitude has been set, confirm the setting by pressing the SET button . The response “Set OK” appears on the display . If you want to configure further settings, press the BIKE or TPC button to access these.
38 M6 Settings – current altitude Press the BIKE or TPC button to select whether you want to set the altitude in metres/feet or sea level pr essure . Press the SET button to confirm the selection. The settings now open. Press the BIKE or TPC button to change the value.
39 M6 Settings – recalibrating the altitude before starting Recalibration means: The M6 measures the current air pressure and converts it into an altitude measurement. The air pressure changes daily depending on the weather . This leads to a constantly changing current altitude measurement despite your home start altitude not having changed.
40 M6 Settings – clock In the VDO M6, you can set the time in 12-hour AM/PM format or 24-hour format. Specify the desired time format in the unit settings (see page 24). How to set the clock: Press and hold the SET button until the settings menu opens.
41 M6 Settings – clock The minute digits now flash on the display . Press the BIKE or TPC button to set the minutes . Press the SET button to confirm your setting. The response “Set OK” appears on the display . If you want to configure further settings, press the BIKE or TPC button to access these.
42 M6 Settings – date Y ou can set the date on the M6. The date can be set in the format DD/MM/YY or MM/DD/YY . Specify the date forma t in the dimension settings. See page 24. How to set the date: Press and hold the SET button until the settings menu opens.
43 M6 Settings – date Press the SET button to confirm the setting. The response “Set OK” appears on the display . If you want to configure further settings, press the BIKE or TPC button to access these. If you do not want to configure any further settings, press and hold the SET button .
44 M6 Settings – switching the beeper on or off On the M6, you can switch the beeper for the heart rate warning on or off. How to set the beeper: Press and hold the SET button until the settings menu opens. Press the BIKE button to move from Memory to Settings .
45 M6 Settings – total values On the M6, the total values can be set at any time, e.g. a t the start of a new season. A TTENTION: the M6 has a memory for the total values.
46 M6 Settings – total values – total distance Y ou can set the total distance ridden on the VDO M6. For example, you can enter your da ta here at the start of a new cyc ling season. Y ou can set the total distance separately for bike 1 and bike 2.
47 M6 Settings – total values – total distance The next digit starts to flash and is ready to be set. Press the BIKE or TPC button to change this digit. Once this digit has also been set, confirm the setting by pressing the SET button . The next digit flashes .
48 M6 Settings – total values – total ride time Y ou can set the total ride time on the VDO M6. For example, you can set your total ride time (sum of the ride time for all trips) at the start of the new cyc ling season. Y ou can set the values separately for bike 1 and bike 2.
49 M6 Settings – total values – total ride time The next digit on the left starts to flash and is ready to be set. Press the BIKE or TPC button to set the value of this digit. Press the SET button to confirm your setting. Once you have set all four digits, confirm the setting again by pressing the SET button .
50 M6 Settings – total values – altitude gain Y ou can set the altitude gain covered in the M6 at any time. For example, you can set this value a t the start of the next cyc ling season. Y ou can set the values separately for bike 1 and bike 2. A TTENTION: the M6 has a data memory .
51 M6 Settings – total values – altitude gain The next digit on the left starts to flash and is ready to be set. Press the BIKE or TPC button to set the value for this digit. Press the SET button to confirm your setting. Once all the digits have been set, confirm the setting by pressing the SET button .
52 M6 Settings – total values – altitude loss Y ou can set the altitude loss covered in the M6 at any time. For example, you can set this value a t the start of the next cyc ling season. Y ou can set the values separately for bike 1 and bike 2. A TTENTION: the M6 has a data memory .
53 M6 Settings – total values – altitude loss The next digit on the left starts to flash and is ready to be set. Press the BIKE or TPC button to set the value of this digit. Press the SET button to confirm your setting. Once all the digits have been set, confirm the setting by pressing the SET button .
54 M6 Settings – total values – maximum altitude Y ou can set the maximum altitude reached to date in the M6, separately for bike 1 and bike 2. A TTENTION: the M6 has a data memory . No data is lost when the battery is replaced. How to set the maximum altitude: Press and hold the SET button until the settings menu opens.
55 M6 Settings – total values – maximum altitude The response “Set OK” appears on the display . If you want to configure further settings, press the BIKE or TPC button to access these. If you do not want to configure any further settings, press and hold the SET button .
56 M6 Settings – total values – distance uphill In the M6, you can set the distance travelled uphill separately for bike 1 and bike 2, for example at the start of the new cyc ling season. A TTENTION: the M6 stores all total values even if you replace the batteries.
57 M6 Settings – total values – distance uphill The next digit on the left starts to flash and is ready to be set. Press the BIKE or TPC button to set the value for this digit. Press the SET button to confirm your setting. Once all the digits have been set, confirm the setting by pressing the SET button .
58 M6 Settings – total values – distance downhill In the M6, you can set the distance travelled downhill separately for bike 1 and bike 2, for example at the start of the new cyc ling season. A TTENTION: the M6 stores all total values even if you replace the batteries.
59 M6 Settings – total values – distance downhill The next digit on the left starts to flash and is ready to be set. Press the BIKE or TPC button to set the value for this digit. Press the SET button to confirm your setting. Once all the digits have been set, confirm the setting by pressing the SET button .
60 M6 Settings – total values – total calorie burn In the M6, the total calorie burn can be set for all trips, separately for bike 1 and bike 2, for example at the start of the new cyc ling season. A TTENTION: the M6 stores all total values even if you replace the batteries.
61 M6 Settings – total values – total calorie burn The next digit on the left starts to flash and is ready to be set. Press the BIKE or TPC button to set the value for this digit. Press the SET button to confirm your setting. Once all the digits have been set, confirm the setting by pressing the SET button .
62 M6 Settings – total values – resetting the total values The M6 offers the opportunity to reset the total values to zero. Before the start of the new cyc ling season, you can therefore reset all your values for the year to zero. How to reset the total values: Press and hold the SET button until the settings menu opens.
63 M6 Settings – total values – resetting the total values The response “T otals Reset Done” appears on the display . If you want to configure further settings, press the BIKE or TPC button to access these. If you do not want to configure any further settings, press and hold the SET button .
64 M6 Setting the navigator The navigator is a second, completely independent trip distance counter . The navigator can: – be reset to zero an y number of desired times during a trip – be set to a distance value – count forwards or backwards from the set distance value.
65 M6 Setting the navigator The second digit on the left flashes . Press the BIKE or TPC button to change this digit. Press the SET button to confirm the entry . Once all the digits have been set, confirm the entr y by pressing the SET button . The response “Set OK” appears on the display .
66 M6 T rip section counter The VDO M6 has a time and distance counter that works similarly to a stopwatch. When the trip section counter is running, the time and the distance covered in this time are recorded. Starting the trip section counter Simultaneously press the BIKE and SET buttons .
67 M6 Resetting the trip section counter to zero T o reset the counter either the section time or the section distance must be shown on the display . Press and hold the BIKE button . The text T rip Section RESET appears on the display . If you continue to hold down the BIKE button , the trip section data is now reset to ze ro .
68 M6 Saving trip data The M6 can save the data for a trip. Data for 10 trips can be saved. If the data memor y is full with 10 trips, the first trip saved is deleted and overwritten with the new trip to be saved.
69 M6 Accessing the trip data from the memory The M6 can store data from 10 trips. This data can be accessed at an y time. How to access the trip data: Press and hold the SET button until the menu opens: Once the menu has opened “Memory” appears on the display .
70 M6 Switching the backlight mode on or off The M6 has a backlit display . If backlight mode is activated, the display illuminates for several seconds each time a button is pressed. If backlight mode is activated, the light icon can be seen at the top of the display .
71 M6 Activating the heart rate option The M6 can also display heart rate values. A TTENTION: the heart ra te option can only be activated if you have the VDO heart rate transmitter , product no. CP3013. How to activate the heart rate option: Press and hold the SET button until the settings menu opens.
72 M6 Display when using the heart rate option If the heart rate option is activated, the current heart rate is shown on the left of the display . If the heart rate option is activated the indicator arrows show whether the heart rate is belo w or above the selected training zone.
73 M6 Functions in the heart rate option If the heart rate option is activated, the heart rate functions are accessed by pressing the TPC (TOT AL/PULSE/CAD) button. The following functions can be sequentially accessed: Heart rate gr aph Displays the heart rate progress for the current trip over the last 10-15 minutes.
74 M6 Functions in the heart rate option Maximum heart rate Indicates the maximum heart rate on the current trip. Time below the selected training zone. Indicates the time during which the current heart rate was under the lower limit for the training zone.
75 M6 Selecting the heart rate tr aining zone If the heart rate option is activated, you can choose between three training zones: F A T zone Select this training zone if you want to promote optimum fat burning while training.
76 M6 Activating the cadence option The VDO M6 can also display the cadence. A TTENTION: to display the cadence, the VDO cadence transmitter , product no. CP3012, must be installed. The cadence option must be activated in the settings. How to activate the cadence option: Press and hold the SET button until the settings menu opens.
77 M6 Activating the cadence option The VDO M6 confirms the setting by displaying the text SET OK . If you want to configure further settings, press the BIKE or TPC button to access these. If you do not want to configure any further settings, press and hold the SET button .
78 M6 Button allocation and functions with the cadence option If the cadence option is activated, the cadence functions are displayed by pressing the TPC (TOT AL/PULSE/CAD) button. Current cadence: Permanently shown on the top right of the display . A verage cadence CAD A VG: The average cadence for the current trip is displayed.
79 M6 Display with heart rate + cadence If both the heart rate and cadence options are activated both values are simultaneously shown on the display . The current heart rate is shown on the left of the middle line instead of the gradient uphill/downhill as a percentage.
80 M6 Button allocation/functions with the heart rate + cadence options All heart rate and cadence functions are accessed by pressing the TPC (TOT AL/PULSE/CAD) button. A description of the heart rate functions can be found on page 73. A description of the cadence functions can be found on page 78.
81 M6 ! OPEN NEW OLD CL OSE SEC. 1 2 3 Replacing the battery in the computer T o ensure your cyc le computer is fully functional, we recommend replacing the battery annually . A TTENTION: your settings, total distance and total ride time information remain stored when you replace the batter y .
82 M6 ! OPEN CL OSE OLD NEW SEC. 1 2 3 Replacing the battery in the speed transmitter The batter y in the speed transmitter should be replaced annually to guarantee seamless wireless transmission. Y ou need a 3 V 2032 batter y . We recommend using a branded battery from Sony , Panasonic, V arta or Duracell.
83 M6 T erms of guarantee VDO Cycle P arts offers a 2-year guarantee on your VDO computer , starting from date of purchase . This guarantee covers material and processing defects on the computer itself, the sensor/transmitter and the handlebar bracket.
84 M6 T roubleshooting Error P ossible cause Correction Half segments on the display (e.g. after a batter y change) Computer software not running correctly after batter y change Remove and re-insert t.
85 M6 T echnical specifications Computer: Approx. 49 H x 38 W x 12 D mm Display: H approx. 39 mm, W approx. 29 mm Computer weight: Approx. 30 g Handlebar bracket w eight: Approx. 10 g Speed transmitter weight: Approx. 20 g Cadence transmitter weight: Approx.
86 M6 Correct disposal of this product (electrical waste) (T o be used in EU countries and other European countries with a separate collection system). The labelling on the product and the relevant literature indicates that it must not be disposed of with normal house- hold waste at the end of its ser vice life.
www . vdocyclecomputing .com Cycle P arts GmbH Le Quartier Hornbach 13 67433 Neustadt/W einstrasse (German y) +49 (0) 63 21- 95 82 7 - 0.
Een belangrijk punt na aankoop van elk apparaat VDO M6 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen VDO M6 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens VDO M6 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding VDO M6 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over VDO M6 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van VDO M6 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de VDO M6 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met VDO M6 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
