Gebruiksaanwijzing /service van het product DP1011 van de fabrikant Visioneer
Ga naar pagina of 36
Xer o x DP1011 user’ s guide.
Xero x DP1011 pr ojector user’ s guide.
C opyr i g h t © 2003 Vi s i oneer , I nc. Reproduction, adaptation, or translation without pri or written permission is proh ibited, except as allowed un der the copyright laws. Xerox ®, the digital X ® are registered trademarks of Xerox Corporation in the Un ited St ates and/or other countrie s and are used under license.
FCC Radio Frequency Interference S t atement This equipment has b een tested and found to comply with the limit s for the class B digit al device, pursuant to p art 15 of the FCC Rules. These limi t s are designed to provide rea sonable protection against interference in a residential inst allation.
Xerox DP1011 User’s Guide iv T able of Content s Welcome Precautions Do’s and Don’ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 What’s in the Box . . . .
Xerox DP1011 User’s Guide 1 We l c o m e Y our new Xe rox DP101 1 projector is an XGA single chip 0.7” DLP™ (Digital Light Processing) projector with these outstand ing features: • T rue XGA, 1024 x 768 addressable pixels • 2.1 lbs (0.95 kgs) compact d esign • Single chip DLP™ te chnology • Compatible with NTSC, NTSC4.
Xerox DP1011 User’s Guide 2 Precautions Precautions Follow all warnings, precaut ions and mainten ance as recommended in this user’s guide to avoid injury and to maximize the life of your projector . W arning— Do not look into the projector’s lens when the lamp is on.
Xerox DP1011 User’s Guide 3 Precautions Do’ s and Don’t s Do: • T urn of f the projector before cleaning. • Use a sof t cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the projector is not being used for a long period of time.
Xerox DP1011 User’s Guide 4 Precautions What’ s in the Box Before proceeding, check the contents of th e box. If items are missing or damaged, cont act the dealer where you purchased the projector .
Xerox DP1011 User’s Guide 5 Precautions The Xerox DP101 1 Projector Focus Ring —Rot ate to focus the image. Zoom Ring —Rotate to zoom the imag e in or out. Elevator Button —Press to release the elevator foot to lower or raise the projector . Zoom Lens —Extends and retract s as you rotate the zoom ring to zoom in/out.
Xerox DP1011 User’s Guide 6 Precautions Connection Port s Power Connector —Plug the powe r cord into the projector here. VGA Connector —Use the VGA cable that you received with you r projector to plug in a computer , HDTV , or component video source.
Xerox DP1011 User’s Guide 7 Installation Inst allation Connecting the Projector 1. Make sure the projector and computer are turned of f. 2. Connect one end of the VGA ca ble to the projector . Connect the other end to the VGA port on t he computer .
Xerox DP1011 User’s Guide 8 Installation Powering On/Off the Projector T o turn on the projector power 1. Remove the lens cap. 2. Make sure that the power cord and the cables from the video sources are securely connected to the pro jector . 3. T urn on the lamp by pressing the Power button on the control panel or on the Remote Contr ol.
Xerox DP1011 User’s Guide 9 Installation T o turn off the projector power 1. Press the Power button on the p rojector or Remote Control to turn off t he projector lamp. An on-screen message appears: Power off the lamp? 2. Press the Power button again to confirm.
Xerox DP1011 User’s Guide 10 Installation Adjusting the Projected Image T o raise the projector 1. Lift the projector up an d press the elevator button.
Xerox DP1011 User’s Guide 11 Installation Adjusting the Projector Zoom/Focus Y ou adjust the focus and zoom in / out with the focus ring and zoom ring on the lens housing. T o focus the image, rot ate the focus ring until the image is clear . The projector can focus at distances from 3.
Xerox DP1011 User’s Guide 12 User Controls User Controls Panel Control and Remote Control The buttons on the Panel Contro l and the Remote Control are for controlling the projector ’s functions. Panel Control Power/St andby Indicator —Flashes green during power startup ; remains steady green wh en projector is ready .
Xerox DP1011 User’s Guide 13 User Controls Remote Control T ransmit Indicator Light —Indicates the in frared signal that is transmitted to, and received by t he projector . PiP —Displays the Pip menu of the On-Screen Display (OSD). Source —Selects type of video source: RGB, Compone nt-p, Component-i, S-Vi deo, Composite Video, or HDT V .
Xerox DP1011 User’s Guide 14 User Controls On-Screen Display (OSD) Menus The On-Screen Display (OSD) menus provide th e options to make image adjustment s and change a variety of settings. The projecto r automatically detects the video source so your selections from the menus will apply to that source.
Xerox DP1011 User’s Guide 15 User Controls Choose a Language 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the Language menu and pre ss the Enter button. The Language menu appears. 3. Use the keys to select the la nguage you want.
Xerox DP1011 User’s Guide 16 User Controls Adjust the Projector Image 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the All Images menu a nd press the Enter button. The All Images menu appears. 3. Use the keys to select the item you want, and use the keys to adjust the selected setting.
Xerox DP1011 User’s Guide 17 User Controls Adjust the Computer Image 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the Computer Image menu and pre ss the Enter button. The Computer Image menu ap pears. 3.
Xerox DP1011 User’s Guide 18 User Controls Adjust the V ideo Image 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the V ideo Image menu and press the Enter button. The Vide o Image menu appears. 3. Use the keys to select the item you want, and use the keys to adjust the selected setting.
Xerox DP1011 User’s Guide 19 User Controls Projector Management 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the Management menu and pre ss the Enter button. The Management menu appears. 3. Use the keys to select the item you want, and use the keys to adjust the selected setting.
Xerox DP1011 User’s Guide 20 User Controls Adjust the PiP (Picture in Picture) 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the PiP menu and press the Enter button. The PiP menu appears. 3. Use the keys to select the item you want, and use the keys to adjust the selected setting.
Xerox DP1011 User’s Guide 21 Maintenance Maintenance Changing the Lamp The projector ’s lamp life is approximate ly 1500 hours of use. The projector automatically monitors the la mp life. After 1500 hours o f use, the projector displays the message: The Lamp has been in use for over 1500 hours.
Xerox DP1011 User’s Guide 22 Maintenance 4. Remove the cover . 5. Remove the two screws from the lamp module. 6. Lift up the handle and pull out the lamp module.
Xerox DP1011 User’s Guide 23 Maintenance T roubleshooting If you try the troubleshooting proc edures described in this section and the problem persist s, you may have a malfunctioning projector . Refer to the technical su pport card that you received with your projector or contact t he retailer where you purch ased your projector .
Xerox DP1011 User’s Guide 24 Maintenance For Windows 95, 98, 2000, XP: 1. From the Windows S tart menu, select Settings/Control Panel and then double-click the Display icon. 2. Select the Setting t ab. The Desktop Area shows the resolution setting. 3.
Xerox DP1011 User’s Guide 25 Maintenance Problem: The image is flicke ring or otherwise unst able T ry one of these possible solutions: • On the On-screen display , go to the Computer Mode p age and select T racking. Change the tracking until the image stabilizes.
Xerox DP1011 User’s Guide 26 Maintenance Problem: Image is reversed. On the On-screen display , go to the Computer/Video Mode/ Management p age and select Projection Direction. Change the direction of projection to display the image properly . Problem: Lamp burns ou t or make a popping sound.
Xerox DP1011 User’s Guide 27 Maintenance Xerox DP101 1 Projector Specifications Lamp V alve Single Chip DLP™ (Digital Ligh t Processing) T echnology Lamp 120W user-replaceable P_VIP lamp Number of Pixels 1024 pixels (horizontal) by 768 lines (ve rtical) Displayable Colors 16.
Xerox DP1011 User’s Guide 28 Maintenance Setting the Screen Resolution For best viewing on your computer screen, it s resolution should be set to 1024 x 768 or less. T o reset the scree n resolution, follow the steps below , referring to the chart on page 29 for the correct settings for your type of co mputer and monitor .
Xerox DP1011 User’s Guide 29 Maintenance Comp atibility Modes—Windows Computers * Compression computer image. Mode Resolution (Analog) V . Frequen cy (Hz) H. Frequency (Hz) VESA VGA 640 x 350 70 31.5 VESA VGA 640 x 350 85 37.9 VESA VGA 640 x 400 85 37.
Xerox DP1011 User’s Guide 30 Maintenance Comp atibility Modes—Macintosh Compu ters * Compression computer image. Mode Resolution (Analog) V . Frequen cy (Hz) H. Frequency (Hz) MAC 16”* 832 x 624 74.55 49.725 MAC 19”* 1024 x 768 75 60.24 MAC* 1 152 x 670 75.
05-0600-000.
Een belangrijk punt na aankoop van elk apparaat Visioneer DP1011 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Visioneer DP1011 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Visioneer DP1011 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Visioneer DP1011 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Visioneer DP1011 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Visioneer DP1011 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Visioneer DP1011 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Visioneer DP1011 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
