Gebruiksaanwijzing /service van het product Qumi Q2 van de fabrikant Vivitek
Ga naar pagina of 51
.
ii Preface Copyright ©201 1 Vivitek Corporation. is a trademark of Vivitek Corporation. Other trademarks are the properties of their respective owners. V alues, weights and dimensions are approximate. Specications are subject to change without prior notice.
iii Important Safety Information Important: It is strongly recommended that you read this section carefully before using the Qumi. These safety and usage instructions will ensure that you enjoy the Qumi.
iv Qumi Installation Notice • Allow at least a 20-inch (50cm) clearance around the exhaust vent. • Make sure that the intake vents do not recycle hot air from the exhaust vent.
v Power Safety • Only use the supplied adapter . • Do not place anything on the cord. Place the cord where it will not be in the way of foot traffic. • Remove the battery from the remote control when storing or not in use for a pro- longed period.
vi T able of Contents Preface ��������������������������������������������������������.
1 Chapter 1 At a Glance Overview Front/T op/Right View Keypad Menu Open and exit the OSD buttons Up Cursor Navigate and change settings in the OSD Left Cursor Navigate and change settings in the OSD E.
2 Rear/T op/Left View Bottom View Power Switch T urn on/off the Qumi UNIVERSAL I/O Connect a RGB or component cable from a device MINI HDMI Connect a MINI HDMI cable from a HDMI device DC IN Connect t.
3 Accessories Along with the Qumi, the following accessories are included: Remote Control (With one 3V CR2025 battery) Mini to Standard HDMI Cable Mini to Mini HDMI Cable VGA Cable Regional Power Cord.
4 Remote Control Important: 1. Be sure nothing obstructs the path between the remote control and the Qumi. If the path between the remote control and the Qumi is obstructed, the signal can 2. The buttons and keys on the Qumi have the same layout and similar functions as the corresponding buttons on the remote control.
5 Chapter 2 Getting Started What Y ou Need Many types of external devices and peripherals can be connected to the Qumi. External or portable music players can be connected to play music. DVD, VCD and VHS players can be connected to play movies. Camcorders and digital cameras can also be used to play videos and display photos.
6 Setting Up Qumi Connecting Apple Devices Connect an Apple ® device to the Qumi by using the following: Apple ® Connection Kit VGA to Apple ® Video Adapter (Optional) Connecting Peripherals by HDMI Connect HDMI-compatible perip herals to the Qumi using the Mi ni to Standard HDMI cable.
7 Connecting Personal Computers Connect a personal computer to the Qumi by using the VGA cable. Note: The personal computer must have a VGA output port to use the VGA cable to connect to the Qumi. Inserting a microSD Card or USB Drive Connect a USB drive or microSD card to the Qumi by inserting the storage device(s) into the appropriate port.
8 Connecting Audio Connect earphones or mini speakers to the Qumi by inserting into the Audio Out port. Starting and Shutting down the Qumi 1� Connect the AC power adapter to the Qumi. Connect the other end of the AC power adapter to a wall outlet. Note: Adapter models may vary between regions.
9 3� If more than one input device is connected, press the SOURCE button on the remote control and use the ▲ or ▼ buttons to select the applicable device or press ▲ and ▼ or ◄ and ► at the same time on the keypad on the Qumi.
10 Setting an Access Password (Security Lock) T o prevent unauthorized use of the Qumi, you can create a password. When the access password function is enabled, the password must be entered after the Qumi has been turned on.
1 1 6. appears when you power on the Qumi when the Security Lock is enabled. Enter the password that was created in step 5. Important: Keep the password in a safe place. Without the password, you will not be able to use the Qumi. If you lose the password, contact your reseller for information on resetting the password.
12 Setting Up the Remote The remote control comes with one (1) 3V lithium battery (CR2025). The battery is pre-installed in the remote control. T o begin using the remote control, remove the plastic tab (A) from the battery compartment. Replacing the Remote Control Batteries 1.
13 Chapter 3 Qumi Media Suite Overview microSD card or USB drive. Music, movies, pictures and documents can be displayed. The media suite menu contains five (5) applications that can be accessed: • Movie – An easy to use movie player that displays multiple movie formats.
14 Movies Supported Formats The following video formats are supported: • AAC-LC • MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels at 30 frames per second; Simple • Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, Watching Y our Movie T o open a list of movies, perform the following: 1.
15 Photos Supported Formats • BMP (up to 4000 x 3000 pixels) • PNG (up to 4000 x 3000 pixels) • JPG (up to 4000 x 3000 pixels) Viewing Y our Photo When a USB flash drive and/or a microSD card is inserted, the storage card folder icon T o open a photo in photo viewer , perform the following: 1.
16 Music Supported Formats: • MP3 (up to 256Kbps bit-rate) • WMA, MID, MIDI, MP1, MP2, OGG, AAC, AMR, W A V , AC3, M4A, A WB, APE Playing your T rack T o open the music list, perform the following: 1. Press the ◄ or ► key to select the Music icon in the media suite menu.
17 The music player provides controls to navigate through a song playlist. The following table provides a description the controls. ICON DESCRIPTION / / T oggle speaker output to Left/Right/Stereo / R.
18 Ofce V iewer Supported Formats The document viewer in the Qumi Media Suite can open the following types of documents: • Microsoft ® Word (97-2007, .doc/.docx) • Microsoft ® PowerPoint (97-2007, .ppt/.pptx) • Microsoft ® Excel (97-2007, .
19 Settings System Options The Information menu provides details about the software version. Play Mode The play mode menu displays settings for both video and music player options. The following settings are available: • Repeat None – The videos or music tracks will not repeat after it is completed.
20 Chapter 4 On-Screen Display (OSD) Settings OSD Menu Controls The Qumi has an On-Screen Display (OSD) settings menu that allows you to make adjustments and changes to settings, such as display and audio.
21 Setting the OSD Language The language that is displayed in the OSD can be changed. T o change the language in the OSD, perform the following steps: 1. Enter the OSD menu. Press the ◄ or ► button to select the Installation I menu. 2. Press the ▲ or ▼ button until the cursor highlights the Language setting.
22 OSD Menu Overview Use the following illustration to quickly nd a setting or determine the range for a setting..
23 OSD Sub-Menu Overview.
24 Image Menu T o access the Image menu and adjust the settings, perform the following steps: 1. Enter the OSD menu. 2. Press the ◄ or ► button to select the Image menu. 3. Press the ▲ or ▼ button to move the cursor up or down in the Image menu.
25 Advanced Feature T o access the Advanced menu and adjust the settings, perform the following steps: 1. Enter the OSD menu. 2. Press the ◄ or ► button to select the Image menu. 3. Press the ▼ or ▲ button to move to the Advanced menu and then press .
26 Computer Menu T o access the Computer menu and adjust the settings, perform the following steps: 1. Enter the OSD menu. 2. Press the ◄ or ► button to select the Computer menu. 3. Press the ▲ or ▼ button to move the cursor up or down in the Computer menu.
27 V ideo/Audio Menu T o access the Video/Audio menu and adjust the settings, perform the following steps: 1. Enter the OSD menu. 2. Press the ◄ or ► button to select the Video / Audio menu. 3. Press the ▲ or ▼ button to move the cursor up and down in the Video / Audio menu.
28 Audio T o adjust the audio settings, press to enter the Audio sub menu. ITEM DESCRIPTION V olume Press the ◄ or ► button to adjust the audio volume. Mute Press the ◄ or ► button to turn on or off the speaker . Audio Input Press the ◄ or ► button to select audio input.
29 Installation I Menu T o access the Installation I menu and adjust the settings, perform the following steps: 1. Enter the OSD menu. 2. Press the ◄ or ► button to select the Installation I menu. 3. Press the ▲ or ▼ button to move the cursor up or down in the Installation I menu.
30 Advanced T o adjust the advanced settings, press to enter the Advanced sub menu. ITEM DESCRIPTION Security Lock Press the ◄ or ► button to enable or disable security lock function. Keypad Lock Press the ◄ or ► button to enable or disable keypad lock function.
31 Installation II Menu T o access the Installation II menu and adjust the settings, perform the following steps: 1. Enter the OSD menu. 2. Press the ◄ or ► button to select the Installation II menu. 3. Press the ▲ or ▼ button to move the cursor up or down in the Installation II menu.
32 Advanced Feature T o access the Advanced menu and adjust the settings, perform the following steps: 1. Enter the OSD menu. 2. Press the ◄ or ► button to select the Installation II menu. 3. Press the ▲ or ▼ button to select the Advanced menu and then press .
33 OSD Menu Setting ITEM DESCRIPTION Menu Position Press the ◄ or ► button to select different OSD location. T ranslucent Menu Press the ◄ or ► button to select OSD background translucent level. Menu Display Press the ◄ or ► button to select OSD timeout delay .
34 3D ITEM DESCRIPTION 3D Press the ◄ or ► to select Off, DLP-Link or IR. 3D Sync Invert Press the ◄ or ► to turn 3D Sync Invert On or Off. Factory Reset T o reset all of the menu items to the factory default values (except Language and Security Lock), perform the following steps: 1.
35 Status T o see the status of the Qumi, perform the following steps: 1. Press the ▲ or ▼ button to move the cursor up or down in the Installation II menu. 2. Select the Installation II sub menu 3. Press to enter the Status sub menu. ITEM DESCRIPTION Active Source Displays the activated source.
36 Chapter 5 T aking Care of Y our Qumi Cleaning the Qumi Cleaning the Qumi to remove dust and grime will help provide trouble-free operation. Warning: 1. The Qumi should be turned off and unplugged before cleaning. Failure to do so may result in injury or damage to the system.
37 T roubleshooting Common Problems and Solutions These guidelines provide tips to deal with problems you may encounter while using the Qumi. If the problem remains unresolved, contact your dealer for assistance. The problem sometimes can be as simple as a wire that is not completely connected.
38 Image Problems Problem: No image appears on the screen 1. V erify that the settings on your personal computer are properly congured. 2. T urn of f all of the equipment and power up the equipment again in the correct order . Problem: The image is blurred 1.
39 Audio Problems Problem: There is no sound 1. Adjust the volume of the audio source. 2. Check the audio cable connection. 3. T est the output of the audio source with other speakers. 4. Have the Qumi serviced. Problem: The sound is distorted 1. Check the audio cable connection.
40 5. How are images from a digital camera or a USB storage device displayed? Images and other content can be displayed by connecting the following devices to the Qumi: • • Digital camera • Smart phone • microSD card • Multimedia storage viewer Once the devices are connected, images can be displayed by using the Qumi Media Suite.
41 Note: . Qumi Q2 Up to 300 Lumens HD 720p (1280x800) UXGA (1600 x 1200) 2,500:1 (Full On/Full Off) ≈30,000 Hours, LED HD Pico DLP® Technology by Texas Instruments 1.55:1 (Distance/Width) 30" to 90" (0.8 to 2.3 m) 3.28' to 9.84' (1 to 3m) TBD Fixed Lens 16:10 Native, 4:3 & 16:9 Compatible 102.
42 Projection Distance vs� Projection Size Projection Distance and Size T able IMAGE DIAGONAL (MM/INCHES) IMAGE WIDTH (MM/INCHES) IMAGE HIGH (MM/INCHES) PROJECTION DIST ANCE (MM/INCHES) OFFSET -A (MM/INCHES) 762/30 646/25.43 404/15.91 1000/39.37 10/0.
43 T iming Mode T able SIGNAL RESOLUTION H-SYNC (KHZ) V -SYNC (HZ) COMPOSITE / S-VIDEO COMPONENT RGB DVI/HDMI NTSC — 15.734 60.0 O — — — P AL/SECAM — 15.625 50.0 O — — — VESA 720 x 400 37.9 85.0 — — O O 640 x 480 31.5 60.0 — — O O 640 x 480 37.
44 Qumi Dimensions.
45 Regulatory Compliance FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Een belangrijk punt na aankoop van elk apparaat Vivitek Qumi Q2 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Vivitek Qumi Q2 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Vivitek Qumi Q2 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Vivitek Qumi Q2 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Vivitek Qumi Q2 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Vivitek Qumi Q2 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Vivitek Qumi Q2 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Vivitek Qumi Q2 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
