Gebruiksaanwijzing /service van het product WETL11140 van de fabrikant Weslo
Ga naar pagina of 24
USER’S MANUAL Serial Number Decal Model No. WETL11140 Serial No. QUESTIONS? As a manufacturer, we are com - mitted to providing complete customer satisfaction. If you have questions, or if there are missing or damaged parts, please call: Or write: ICON Health & Fitness, Ltd.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described in this manual. 3. Place the treadmill on a level surface, with at least 2.
4 22. DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the main- tenance and adjustment procedures de- scribed in this manual. Never remove the motor hood unless instructed to do so by an authorised service representative.
5 Thank you for selecting the WESLO CADENCE ® 55 treadmill. The CADENCE 55 treadmill combines ad- vanced technology with innovative design to let you enjoy an exc ellen t form o f cardiovascular exercise in t he convenience and privacy of y our h ome.
6 ASSEMBL Y A ssembly requires two persons. Place a mat under the treadmill to protect the floor during assembly. S et the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until as- sembly is completed.
4. Identify the Right Handrail (5), which has a large hole in the left side. Feed the Wire Harness (53) into the hole in the bottom of the Right Handrail and out of the large hole in the side. Note: It may be helpful to use needlenose pli- ers to pull the Wire Harness out of the hole.
6. Place the Console Base (45) on the Right Handrail (5) and the Left Handrail (not shown). Attach the Console Base with four 3/4” Screws (77) (only two Screws are shown). Do not tighten the Screws yet. Insert the Wire Harness (53) through the two indicated plastic ties on the Console Base (45).
9 9 9. Set the Console (2) on the Console Base (45). Insert the excess Wire Harness (53) into the large hole in the side of the Right Handrail (5). Securely tighten the plastic ties on the bottom of the Console Base to prevent the Wire Harness from slipping.
10 13. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place. The large hex key is used to adjust the walking belt (see page 17). To protect the floor or carpet, place a mat under the treadmill.
1 1 THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM ,a high-performance lubricant. IMPOR- TANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
12 STEP-BY-STEP CONSOLE OPERATION Before operating the console, make sure that the power cord is properly plugged in (see page 11). Locate the on/off switch on the side of the tread- mill near the power cord. Move the on/off switch to the on position.
To stop the walking belt, press the Stop button. The elapsed time will begin to flash in the Time d isplay. N ote: During the first few minutes that the tread- mill is used, inspect the alignment of the walking belt, and align it if necessary (see page 17).
14 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.) to raise, lower, or move the t readmill. 1. Hold the treadmill with your hands in the locations shown at the right.
15 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Pivot the treadmill down until the frame is past the latch pin. Slowly release the latch knob.
16 MAINTENANCE AND TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department. PROBLEM: The power does not turn on SOLUTION: a.
17 PROBLEM: The walking belt slows when walked on S OLUTION: a . If an extension cord is needed, use only a 3-conductor, 1mm 2 ( 14-gauge) cord that is no longer than 1.5 m (5 ft.). b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged.
18 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
19 EXERCISE FREQUENCY T o maintain or improve your condition, complete three workouts each week, with at least one day of rest be- tween workouts. After a few months, you may com- plete up to five workouts each week if desired. The key t o success is to make exercise a regular and enjoyable part of your everyday life.
20 NOTES.
P ART LIST—Model No. WETL1 1 140 R0105A 1 1 Hood 2 1 Console 3 1 Motor Belt 4 1 Left Handrail 5 1 Right Handrail 6 1 Grounding Nut 7 1 Motor 8 1 Reed Switch 9 9 Electronics Screw 10 1 Reed Switch Cl.
1 91 91 91 64 86 58 62 52 15 74 15 56 12 16 18 17 15 14 13 56 8 95 75 15 69 72 70 71 83 15 15 60 21 35 9 73 71 71 81 63 59 84 88 85 10 20 56 80 81 13 85 12 56 62 52 46 77 6 25 66 71 70 56 95 30 96 56 56 56 56 56 56 57 43 56 98 103 40 46 67 47 67 47 3 82 7 24 80 101 97* 100 29 19 9 44 23 22 27 9 9 9 9 26 102 EXPLODED DRA WING—Model No.
36 36 104 104 2 49 50 77 77 77 94 48 45 38 89 78 79 76 42 31 11 33 25 93 7 7 55 77 4 34 77 32 86 65 89 53 77 5 86 41 41 99 31 11 31 11 61 33 34 93 28 68 68 28 54 53 31 11 61 37 58 86 5 90 105 6 28 87 28 87 EXPLODED DRA WING—Model No.
Part No. 210264 R0105A Printed in USA © 2005 ICON IP, Inc. ORDERING REPLACEMENT P ARTS I f you encounter any problems with this product, or if you need to order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write: ICON Health & Fitness, Ltd.
Een belangrijk punt na aankoop van elk apparaat Weslo WETL11140 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Weslo WETL11140 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Weslo WETL11140 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Weslo WETL11140 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Weslo WETL11140 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Weslo WETL11140 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Weslo WETL11140 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Weslo WETL11140 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
