Gebruiksaanwijzing /service van het product 6060 van de fabrikant Xerox
Ga naar pagina of 204
www .creo.com Installation Guide English CXP6000 Color Server for DocuColor 2060/2045/6060 version 3.0 653-0029 9A.
.
CXP6000 Color Server for DocuColor 2060/2045/6060 version 3.0 Installation Guide.
This P age is Intenti onally Left Blank.
Copyright C o p y r i g ht © 200 3 C r e o I n c. A ll r i g hts r es e r v ed. No c opyi ng, dis trib ution, publi cation, modific ation, or in corpora tion of this document, in whole or part , is permitted without the express written permission of Creo .
The text and drawings herein ar e for illustration and re ference o nly . The specifications on which they are based are subject to change. Creo I nc. may , at any time and without noti ce, make chang es to this document.
Environment Management System (EMS) EMS Overview Creo i s committed t o the En v ironmen t Management S ystem (EMS). A cc ording t o this policy , we are committ ed to keeping cust omers and serv ice engine ers informed about the pr inciples of handling compan y products with an emphasis on en vironmental conservation.
This P age is Intenti onally Left Blank.
Using This Guide vii Installation Guide Purpose ..................................................................................................... ................. viii Who Should Use This Guide ....................................................
vi CXP6000 Color Server Installation Guide Configuring the Host Name ...................................................................................................... ..... 121 Setting the Date and Time ...........................................
Using This Guide Installation Guide Purpose .................................................................viii Who Should Use This Guide ..............................................................viii Chapter Content and Description ............
viii Using This Guide Installation Guide Purpose This Installation G uide has been desi g ned to guide you thr ough se tting up your CXP6000 Color Server. It will also direct yo u in setting up client workstations t o print w ith the CXP6000 Color Server, printing test files, and administrating your CXP6000 Color Server syste m.
Conventions Used in This Guide ix Conventions Used in This Guide This section describes the fonts, terminology , and symbols used in this guide. Fonts Frutiger bold is used to r efer to b uttons and other items in a dialog box, file names, folders, menu names, and men u commands.
x Using This Guide T erminology Clear Place the mouse pointe r ov er the check bo x for the specified option, and clic k the left mouse button so that the X or check mark is remo ved from the c heck bo x. Click Place the mouse pointe r ove r the specified option or button and press and r elease the left mouse button.
For More In formation xi Symbols For More Information V isit Creo at www .creo.c om for documentation, training courses, downloads, and ser v ice and support contacts. Important: This symbol tells you about things that may cause process delays or reduce functionality , reliability , or quality .
This P age is Intenti onally Left Blank.
Setting Up Client W orkstations Default Network Printers on PC and Macintosh Clients .......................2 Defining a Printer on PC Client Workstations.......................................3 Defining a Printer on Macintosh Client Workstations ....
2 Chapter 1 – Setting Up Client Workstations Default Network Printers on PC and Macintosh Clients For M acintosh and PC networks, the CXP6000 Color Server pro vides three default network printers, known as vir tual printers.
Defining a Printer on PC Client Workstations 3 Defining a Printer on PC Client W orkstations PC client w orkstations with the foll owing operat ing systems installed, can print to the CXP6000 Color Server: W indows 98/ME and W indo ws NT 4.0/2000 and XP .
4 Chapter 1 – Setting Up Client Workstations 4. Bro wse through the network for the CXP6000 Color Server and double-click the server name. A list of the network printers is displayed. 5. Select one of the network printers (for example, ProcessPrint ), and click OK .
Defining a Printer on PC Client Workstations 5 Th e fo ll ow i n g w in dow ap p ea rs . 6. If y ou want to set this printer as the default printer on yo ur computer , select Ye s .
6 Chapter 1 – Setting Up Client Workstations Th e fo ll ow i n g w in dow ap p ea rs . 8. Click Finish to compl e te th e s et up. The CXP6000 Color Server netw ork printer is now suc cessfully installed. 9. Re peat the above pr ocess to install additional network printers.
Defining a Printer on PC Client Workstations 7 Defining a Printer - Windows 98 T o define a CXP6000 Color Ser ver network printer thr ough the Windows Add Printer Wizard: 1. On your W indows desktop , click the Sta rt button, and follo w the path Settings>Printers .
8 Chapter 1 – Setting Up Client Workstations Th e fo ll ow i n g w in dow ap p ea rs . 4. Select Network printer and click Next ..
Defining a Printer on PC Client Workstations 9 Th e fo ll ow i n g w in dow ap p ea rs ..
10 Chapter 1 – Setting Up Client Workstations 5. T y pe the network path or the q ueue name of y our printer . If y ou don ’t know the e xact name, click Br owse to view the available netw ork printers. . 6. Select one of the network printers (for example, ProcessPrint ).
Defining a Printer on PC Client Workstations 11 Th e fo ll ow i n g w in dow ap p ea rs . 9. If y ou want to set this printer as the default printer on yo ur computer , select Ye s .
12 Chapter 1 – Setting Up Client Workstations Th e fo ll ow i n g w in dow ap p ea rs . 11. Select Ye s to print a test page. The CXP6000 Color Server netw ork printer is now suc cessfully installed. 12. Click Finish to compl e te th e s et up. 13. Re peat the above pr ocess to install additional network printers.
Defining a Printer on PC Client Workstations 13 Defining a Printer - Windows 2000 and ME T o define a CXP6000 Color Server network printer though the Windows Add Printer Wizard: 1. On your W indows desktop , click the Start butt on and follow the path Settings>Printers .
14 Chapter 1 – Setting Up Client Workstations Th e fo ll ow i n g w in dow ap p ea rs . 4. Select Network printer . 5. Click Next ..
Defining a Printer on PC Client Workstations 15 Th e fo ll ow i n g w in dow ap p ea rs . 6. Select T ype the printer name, or click Next to browse for a printer . 7. T y pe the exact name of the printe r in the Name box. Or: Click Next to browse for a pr inter .
16 Chapter 1 – Setting Up Client Workstations Th e fo ll ow i n g w in dow ap p ea rs . 8. Select one of the network printers (for example, ProcessPrint ).
Defining a Printer on PC Client Workstations 17 Th e fo ll ow i n g w in dow ap p ea rs . 10. If y ou want to set this printer as the default printer on yo ur computer , select Ye s .
18 Chapter 1 – Setting Up Client Workstations Th e fo ll ow i n g w in dow ap p ea rs . 12. Click Finish to comple te th e s et up. The CXP6000 Color Server netw ork printer is now suc cessfully installed. 13. Re peat the above pr ocess to install additional network printers.
Defining a Printer on PC Client Workstations 19 Defining a Printer - Windows XP T o define a CXP6000 Color Server network printer though the Windows Add Printer Wizard: 1. On your W indows deskt op, c lick the Start button and follow th e path Printers and Faxe s .
20 Chapter 1 – Setting Up Client Workstations The Printer and F ax es w indow appears. 2. From th e Printer T asks , select Add a printer ..
Defining a Printer on PC Client Workstations 21 The Ad d Printer W izard appears. 3. Click Next ..
22 Chapter 1 – Setting Up Client Workstations The Local or Network Printer w indow appears. 4. Select A network printer , or a printer attached to another com puter and click Next .
Defining a Printer on PC Client Workstations 23 The Specify a Printer window appears. 5. Select Browse for a prin ter and click Next ..
24 Chapter 1 – Setting Up Client Workstations The Bro wse for Printer window appears..
Defining a Printer on PC Client Workstations 25 6. Bro wse to the CXP6000 Color Server and double-click it to displa y the list of network printers. 7.
26 Chapter 1 – Setting Up Client Workstations The Default Printer window appears. 8. If y ou want to set this printer as the default printer on yo ur computer , select Ye s .
Defining a Printer on PC Client Workstations 27 Th e fo ll ow i n g w in dow ap p ea rs . 10. Click Finish t o close the wizard. The CXP6000 Color Server network printe r is added to your printer list. T o define a CXP6000 Color Ser ver network printer in Windows XP through the Network: 1.
28 Chapter 1 – Setting Up Client Workstations Creating PostScript Files on the PC The following proc edures describe how to cr eate P ostScr ipt files using the CXP6000 Color Server fr om the client workstation.
Defining a Printer on PC Client Workstations 29 T o define a Print to File printer locally: 1. Start the Adobe P ostScript Dr ive r application (the application is available on CD#3 in the Utilities f older , or at A dobe's W eb site at www .adobe.
30 Chapter 1 – Setting Up Client Workstations The W elcome window appears. 2. Click Next ..
Defining a Printer on PC Client Workstations 31 The End User License Agreement w indow appe ars. 3. Re ad the License Agreement and c lick ACCEPT ..
32 Chapter 1 – Setting Up Client Workstations Th e fo ll ow i n g w in dow ap p ea rs . 4. Select It is directly connected to y our computer (Local Print er), and click Next .
Defining a Printer on PC Client Workstations 33 Th e fo ll ow i n g w in dow ap p ea rs . 5. Select the FILE: Local Port and click Next ..
34 Chapter 1 – Setting Up Client Workstations Th e fo ll ow i n g w in dow ap p ea rs . 6. Click Br owse . Note: The next step is to configure the printer with the CXP6000 Color Server PPD.
Defining a Printer on PC Client Workstations 35 The Bro wse for Printer window appears. 7. Click the Network button and bro wse to y our CXP6000 Color Ser ver.
36 Chapter 1 – Setting Up Client Workstations The Map N etwork Drive window appears. 8. Locate the CXP6000 Color Server and double click on the server ic on.
Defining a Printer on PC Client Workstations 37 The Bro wse for Printer window appears. 10. Double c lick the PPD folder and select the CXP6000 C olor Ser ver PPD: CXP6K3_6.ppd . 11. Click OK . Note: This Spi r e PPD name is for Xe r ox DocuColor 6060.
38 Chapter 1 – Setting Up Client Workstations Th e fo ll ow i n g w in dow ap p ea rs . 12. From th e Printers list, select the CXP6000 Color Ser ver printer , and click Next .
Defining a Printer on PC Client Workstations 39 Th e fo ll ow i n g w in dow ap p ea rs . 13. Select Not Shared and click Next ..
40 Chapter 1 – Setting Up Client Workstations Th e fo ll ow i n g w in dow ap p ea rs . 14. T y pe a name for the printer whic h you will be able t o identify on the client wo rkstation, for example CXP6000_ProcessStor e . 15. Select Y es (Recommended) if y ou want to print a test page or select No , the n click Next .
Defining a Printer on PC Client Workstations 41 Th e fo ll ow i n g w in dow ap p ea rs . . 16. Click Instal l to install the Print to file pr inter with the CXP6000 Color Ser ver PPD . When prompted to configure the printer , click Ye s and then clic k Next .
42 Chapter 1 – Setting Up Client Workstations Th e fo ll ow i n g w in dow ap p ea rs . 17. Select Ye s . 18. Click Next ..
Defining a Printer on PC Client Workstations 43 The Printe r Properties window appears. 19. Configur e the printer acco rding to y our specifications and then click OK .
44 Chapter 1 – Setting Up Client Workstations Th e fo ll ow i n g w in dow ap p ea rs . 20. Click Finish to compl e te th e s et up. The printer appears in the Printers window . Y ou are now ready to print *.ps and *.prn files. Once printed, these files can be imported and printed on the CXP6000 C olor Server.
Defining a Printer on PC Client Workstations 45 Copying PPD from PC It is nec essar y to use the CXP6000 Color Server PPD to cr eate PS files t o send to the CXP6000 Color Se r ver. The CXP6000 Color Server PPD should therefor e be copied and distributed to the cu stomer .
46 Chapter 1 – Setting Up Client Workstations Defining a Printer on Macintosh Client W orkstations The CXP6000 Color Server can print to M acintosh client workstations running Macintosh OS 9 and OSX (10. 2). Y ou can also submit jobs using the CXP6000 C olor Ser ver virtual printers ov er a T CP/IP prot ocol.
Defining a Printer on Macintosh Client Workstations 47 4. The system should aut omatically locat e the CXP6000 Color Server PPD and configure the printer . If it does not , click Select PPD . 5. From th e li s t o f Printer Descriptions , select CXP6K3_6.
48 Chapter 1 – Setting Up Client Workstations The printer is now set as a CXP6000 Co lor Ser ver network printe r . If y ou hav e the Desktop P rinter Spooler ext ension enabled, a printer icon appears on the deskto p. 7. Re peat the above pr ocess to install additional network printers.
Defining a Printer on Macintosh Client Workstations 49 Setting the Network Printer for Macintosh OS X (10.2) T o set up a CXP6000 Color Server n etwork printer on Macintosh OS X: 1. From th e Go menu, select Applications . 2. Open the Utilities folder .
50 Chapter 1 – Setting Up Client Workstations 4. Click the Add Printer button. Th e fo ll ow i n g w in dow ap p ea rs . 5. Select AppleT alk as the connectio n ty pe. 6. Bro wse to the CXP6000 Color Server. Note: If you would like to use the LPR pr otocol instead, see the procedur e To Configure an LPR Printer on page 73 .
Defining a Printer on Macintosh Client Workstations 51 7. Open the Printer Model pop-up menu and select Other ..
52 Chapter 1 – Setting Up Client Workstations 8. Bro wse to the folder to which you hav e copied the CXP6K3_6 . ppd and select it. 9. Click the Choose button to assign the CXP6K3_6.ppd to t he se l ec te d CXP6000 Color Server network printe r . Note: This Spi r e PPD name is for Xe r ox DocuColor 6060.
Defining a Printer on Macintosh Client Workstations 53 Th e fo ll ow i n g w in dow ap p ea rs . 10. Click the Add button t o add the new printer to the printer list.
54 Chapter 1 – Setting Up Client Workstations LPR Printing with th e CXP6000 Color Server This section c over s the proc edures for setting up an d configuring an LPR / T CP/IP printer from the follo w ing computers. • Wi n d o w s N T 4 . 0 • W indows 2000/XP • W indows NT/2000/XP C ommand Line • Mac OS X (10.
LPR Printing with the CXP6000 Color Server 55 2. Microsoft T CP/IP Printing ser v ice 3. Latest A dobe PS Printe r Driver (y ou can install this from the d:utiltiesUtilitiesPC utilities on the CXP6000 Color Server , or you can download the latest version fr ee from www .
56 Chapter 1 – Setting Up Client Workstations 2. In the P rinter window , from the File men u, select Server Properties . 3. Select the Port tab, and then c lick the Add Port button. 4. From th e li s t o f A vailable Printer Ports , select LPR Port , and clic k the New Port button.
LPR Printing with the CXP6000 Color Server 57 6. T y pe the exact name of the network printer y ou want t o print to (you can view the exact name of the printer on the CXP600 0 Color Server , under: Admin>Resour ce Manager>Virtual Printers ). In this example the Printer name is OP AL5_Pr ocessPrint .
58 Chapter 1 – Setting Up Client Workstations 4. Select Install a new PostScript Printer , and then clic k Next . 5. In the P rinter Connection T y pe w indow , select It is directly connected to your computer (Local Printer) , and then click Next .
LPR Printing with the CXP6000 Color Server 59 9. Locate the CXP6000 C olor Ser ver PPD , and then select the CXP6000 Color Ser ver PPD: CXP6K3_6.ppd . 10. Click OK . 11. In the Select Printer M odel window , select the CXP6K3_6, and then click Next . 12.
60 Chapter 1 – Setting Up Client Workstations 16. Click Next . 17. In the Setup Information w indow , click Install to in sta ll t he LP R printer with the CXP6000 Color Ser ver PPD . 18. W hen prompted t o configure the printe r , click Ye s . 19. Click Next .
LPR Printing with the CXP6000 Color Server 61 Setting up an LPR printer in Windows 2000/XP The following proc edure describes how t o configure an LPR printer in W indows 2000/XP f or printing to the CXP6000 Color Server . The following items must be installed and c onfigured on the W indo ws 2000/XP co mputer befor e you begin: 1.
62 Chapter 1 – Setting Up Client Workstations 3. Select the Port tab, and then c lick the Add Port button. 4. From th e li s t o f A vailable Printer Ports , select Standard TCP/IP Port , and then click the New Po rt button.
LPR Printing with the CXP6000 Color Server 63 5. Click Next . 6. T y p e the exact name of the CXP6000 Color Server (this bo x is case- sensitiv e), for example, OP AL5 in the Printer Name or IP Address: bo x. 7. T y p e a name for the pr inter that y ou w ill be able to identify on your computer , for ex ample, OP AL5ProcessPrint LPR .
64 Chapter 1 – Setting Up Client Workstations 9. Select Custom in the Device T y pe option, and then clic k Settings . 10. Select the following options: • Protocol : LPR • LPR Setting s : • Qu.
LPR Printing with the CXP6000 Color Server 65 11. Click OK, and the n click Next . Th e fo ll ow i n g w in dow ap p ea rs . 12. Click Finish . 13. Click Close in the P rinter P or ts widow . The new Standard T CP/IP Printer P ort is now defined on y our com put er .
66 Chapter 1 – Setting Up Client Workstations 15. Define the T CP/IP Printe r using the Adobe P ostScript Printer Driv er application. See the f ollowing procedur e.
LPR Printing with the CXP6000 Color Server 67 9. Locate the CXP6000 C olor Ser ver PPD , and then select the CXP6000 Color Ser ver PPD: CXP6K3_6.ppd . 10. Click OK . 11. In the Select Printer M odel window , select the CXP6K3_6 , and then click Next .
68 Chapter 1 – Setting Up Client Workstations 16. Click Next . 17. In the Setup Information w indow , click Install to in sta ll t he LP R printer with the CXP6000 Color Ser ver PPD . 18. W hen prompted t o configure the printe r , click Ye s . 19. Click Next .
LPR Printing with the CXP6000 Color Server 69 Windows NT/2000/XP Command Line Y ou can also submit P o stScript, PDF or VPS files for pr inting to the CXP6000 using the following co mmand s in the W indow c ommand line. The following pr ocedure is suitable for W indows NT , 2000, or XP com put er s.
70 Chapter 1 – Setting Up Client Workstations Setting up an LPR printer in Mac OS X (10.2) Before y ou define a network printer y ou need to install the CXP6 000 Color Server PPD to your Macint osh. Copying the Spire PPD T o copy the CXP6000 PPD: 1.
LPR Printing with the CXP6000 Color Server 71 Th e fo ll ow i n g w in dow ap p ea rs . 4. Select Guest and click the Connect button. Th e fo ll ow i n g w in dow ap p ea rs . 5. Select the CXP6000_Utilities folder , and click OK . The CXP6000_Utilities folder is mounted on your deskto p.
72 Chapter 1 – Setting Up Client Workstations 7. Double-clic k the PPD folder . 8. Copy t he CXP6K3_6.ppd fr om the CXP6000 Color Ser ver to your Macint osh hard disk. Tip: It is recommended that you copy the PPD by dragging and dr opping from th e CXP6000 Color Server to the Library>Printers>PPDs folder on your Macintosh.
LPR Printing with the CXP6000 Color Server 73 Configuring an LPR Printer T o configur e an LPR Printer: 1. Fol l ow th e pro ce d ur e “ T o set up a CXP6000 Color Server network printer on Macintosh OS X” on page 49, until step 5. 2. In the P rinter List window , select LPR Printers using IP as the connection typ e.
74 Chapter 1 – Setting Up Client Workstations 5. In th e Queue Name box, typ e the full name of the CXP6000 Color Server network printe r , for ex ample CXP7_ProcessPrint (case- sensitiv e). 6. From th e Printer Model pop-up me nu, select Other . 7.
LPR Printing with the CXP6000 Color Server 75 9. Click the Add button t o add the new printer to the printer list. The new printer is displa yed in the P rinter List window .
76 Chapter 1 – Setting Up Client Workstations 3. Select the CXP6000 Color Server (for e xample CXP6000 ), and clic k OK . The Login w indow appears. 4. Log i n as Guest, and click the Conn ect button. The corresponding CXP6000 Color Server window appears.
LPR Printing with the CXP6000 Color Server 77 5. Select the Utilities folder and click OK . 6. Select the Utilities volume located on the desktop and click OK . 7. Select the PPD folder . 8. Copy t he CXP6K3_6.ppd file to the System Folder>Extensions>Printer Descriptions folder .
78 Chapter 1 – Setting Up Client Workstations Spire Over TCP/IP The Spire Ov er T CP/IP application enables Macint osh clients to subm it jobs using the CXP6000 Color Server vir tual printers ov er a T CP/IP prot ocol. This co nnection enables a significantly higher spooling speed.
LPR Printing with the CXP6000 Color Server 79 The Login w indow appears. 3. Select Guest and click the Connect button. The corresponding CXP600 0 Color Ser ver window appears.
80 Chapter 1 – Setting Up Client Workstations 4. Select the Utilities folder and click OK . The Utilities folder icon appears on your deskt op; double-click it to open the folder . 5. Double-clic k the Choose Spire Over IP Installer ico n. 6. Click the Install button.
LPR Printing with the CXP6000 Color Server 81 7. Click Quit . The Choose Spire Over IP option is now added to the Apple menu. 8. T o create desktop printers for printing over IP , fr om the Apple menu, select Choose Spire Over IP .
82 Chapter 1 – Setting Up Client Workstations Th e fo ll ow i n g w in dow ap p ea rs . 11. Select the Select a PPD file on this computer option and click OK . Th e fo ll ow i n g w in dow ap p ea rs . 12. Bro wse to the CXP600 0 Color Server PPD file, that y ou ha ve copied t o your c omputer in step 1, select it and click Open .
LPR Printing with the CXP6000 Color Server 83 13. If y ou would lik e to change the printer name y ou may . Otherwise, click OK . The desktop printer is created and configur ed and the following progr ess indicator appears. W hen the printer is succe ssfully created, the follo w ing message appears.
84 Chapter 1 – Setting Up Client Workstations Printing to the Linux The following proc edure describes how to print fr om Linux to the CXP6000 Color Server using the command line or b y defining a printer using the Linux user inte rface (in this case Red Hat Lin ux).
LPR Printing with the CXP6000 Color Server 85 Bro wse to the dir ector y that contains y our file(s), and then t yp e the following command (all c ommands and printer name ar e case-sensi- tiv e).
86 Chapter 1 – Setting Up Client Workstations 2. Click Ne w to add a setup a new LPR/LPD printer . 3. In the A dd A Ne w Print Queue window , click Forward . 4. In the Set the Print Queue N ame and T yp e window , ty pe a name for the printer that you will be able to identify on your comput er , for exam pl e, OP AL 3_LPR .
LPR Printing with the CXP6000 Color Server 87 6. In the Configur e a U nix Print Queue window , t yp e the CXP6000 C ol o r S erv er se rv e r n a me in th e Server: box, for e xample, OP AL3 .
88 Chapter 1 – Setting Up Client Workstations 9. In the Finish, and Cr eate the N ew P rint Queue window click Apply . 10. In the R ed Hat P rinter Config windo w , click Apply .
LPR Printing with the CXP6000 Color Server 89 Defining a Printer on Unix Client W orkstations AIX and UNIX Command Line T o define an AIX 4.2.1 printer for printing thr ough LPR: 1. On your UNIX w orkstation (for example, AIX 4.2.1), ty pe SMIT and follow the seq uence: Print Spooling>Add a Print Queue> remote>Standard processing .
This P age is Intenti onally Left Blank.
Reinstalling Y our CXP6000 Color Server Overview ..........................................................................................92 Reinstalling the Operating System ................................................ .....94 Reinstalling the Creo Application Softwar e .
92 Chapter 2 – Reinstalling Your CXP6000 Color Server Overview This chapt er describes the two methods of r einstalling y our CXP6000 Color Server software by complete ov erw rite or by system part ition.
Overview 93 The following table outlines the CXP6000 Color Se r ver disk c onfiguration: There ar e two methods of reinstalling the syst em: • Creo So ftware Complete Overwrite Installation : This procedur e replaces the entir e system disk, operating system partition, Creo application, and user partition (partitions C: and D:).
94 Chapter 2 – Reinstalling Your CXP6000 Color Server Reinstalling the Operating System Be fore rei ns ta l li ng , en su re t ha t: • all external SCSI devices are disc onnected from the CXP6000 C olor Server.
Reinstalling the Operating System 95 6. U se the arro ws to select Creo Softwar e Complete Overwrite Installation and press ENTE R . The system starts copying the files. After a f ew m inutes, you are prom pted to remove th e CD -ROM from the CD/DVD- ROM driv e and reboot.
96 Chapter 2 – Reinstalling Your CXP6000 Color Server Reinstalling the Creo Application Software T o reinst all the Creo appl ication softwar e: 1. Select the correct CD-R OM #2 for your printer ty pe. 2. Insert the CD-ROM int o the CD/DVD-R OM drive and close the CD/DVD-R OM drive.
Disk Striping 97 Disk Striping T o stripe the disks: 1. Once the CXP6000 Color Server r eboots the W rong Disk Configuration message appears. This message indicat es that the disks need to be striped. Click OK. The Disk Management window appears. 2. Maximi ze the window .
98 Chapter 2 – Reinstalling Your CXP6000 Color Server 3. In the Disk Manage ment window , check whether Disk 1 and Disk 2 are Dynamic or Unknown . • If the disks ar e Dynamic perform the procedur e: To s t r i p e D y n a m i c disks: on page 99. • If the disks are U nknown perform the procedur e: To s t r i p e U nknow n disks: on page 103.
Disk Striping 99 T o stripe Dynamic disks: 1. P o sition the cursor in the area wher e the disk is desig nated Dynamic . Right-cl ick and select Import For eign Disk . Th e fo ll ow i n g w in dow ap p ea rs . 2. Ve r i f y t h a t Foreign disk set (2 of 2 disks selected) is selected and clic k OK.
100 Chapter 2 – Reinstalling Your CXP6000 Color Server Th e fo ll ow i n g w in dow ap p ea rs . 3. Click OK. The Dynamic disks are striped as shown in the following w indow .
Disk Striping 101 4. P osition the cursor in the white area to the right of the first disk and rig ht-click. Select Change Drive Letter and Path . Th e fo ll ow i n g w in dow ap p ea rs .
102 Chapter 2 – Reinstalling Your CXP6000 Color Server The following Confirm message appears. 6. Click Ye s . 7. Confirm that th e Disk Management windo w appears as illustrated in the following window , which shows that the drive letters ha ve been remo ved .
Disk Striping 103 8. Close the Disk Management window . 9. The Image Disks File S ystem is not F ormatted message appears. Click OK . 10. Y o u have co mple ted to s tr ip e the Dynamic disks. • If co nfigurat ion reco very information is available, pr oceed to The Configur ation W izard (I f Ba ckup A vailable) on page 114.
104 Chapter 2 – Reinstalling Your CXP6000 Color Server Th e fo ll ow i n g w in dow ap p ea rs . 2. Select the Disk 1 and Disk 2 ch eck boxes and cli ck OK . 3. In the Computer M anagement screen, Disk 1 and Disk 2 are no w both designated Basic . P o sition the cursor in the area wher e the first disk is designated Basic .
Disk Striping 105 Th e fo ll ow i n g w in dow ap p ea rs . 4. Select the Disk 1 and Disk 2 che ck boxes and cli ck OK . Disks 1 and 2 are image disks and Disk 0 re mains a system disk. Note: Do not select Disk 0. Upgrading Disk 0 will r emove all the information stored on this disk.
106 Chapter 2 – Reinstalling Your CXP6000 Color Server 5. In the Comput er Management window , Disk 1 and Disk 2 are now both designated Dynamic . P osition the cursor in the cross-hat ched area t o the rig ht of the first disk. Right-cl ick and select Create V olume .
Disk Striping 107 Th e fo ll ow i n g w in dow ap p ea rs . 7. Select Striped volume and click Next ..
108 Chapter 2 – Reinstalling Your CXP6000 Color Server Th e fo ll ow i n g w in dow ap p ea rs . 8. Select Disk 2 and click Add>>..
Disk Striping 109 Th e fo ll ow i n g w in dow ap p ea rs . 9. Disk 1 and 2 are listed unde r Selected dynamic disks . The To t a l volume size has increased from 350 01 MB to 70002 MB .
110 Chapter 2 – Reinstalling Your CXP6000 Color Server Th e fo ll ow i n g w in dow ap p ea rs . 10. Select Do not assign a drive letter or drive path .
Disk Striping 111 Th e fo ll ow i n g w in dow ap p ea rs . 11. Select Do not format this volume and click Next ..
112 Chapter 2 – Reinstalling Your CXP6000 Color Server The following window appears listin g a summar y of disk and str iping information. 12. Click Finish .
Disk Striping 113 Th e fo ll ow i n g w in dow ap p ea rs . 13. Confirm that th e Disk Management wi ndo w appears as illustrated in the previous w indow: one of the volumes is cr oss-hatched, and the drive let ters hav e be en removed. 14. Close the Disk Management window .
114 Chapter 2 – Reinstalling Your CXP6000 Color Server The Configuration Wizard (If Backup A vailable) The CXP6000 Color Server Configuration W izard automatically appears after the installation is c omplete. F ollow the st eps of the wi zard t o complete the CXP6000 Color Server configuration rec ov er y .
The Configuration Wizard (I f Backup Available) 115 Restoring the Configuration T o restor e the configuration: 1. If y ou would lik e to rest ore the default co nfiguration, selec t Default Configuration .
116 Chapter 2 – Reinstalling Your CXP6000 Color Server 4. Click the Start Reco very button. The Rest ore Configuration dialog box appears. 5. By default, all cat egories are selected. If y ou do not want to rest ore certain categories, clear the required selections.
The Configuration Wizard (I f Backup Available) 117 9. Click Next in Step 2 R ecov er y w indow . The V iew Configuration window appears..
118 Chapter 2 – Reinstalling Your CXP6000 Color Server 10. Click Close to exit the V iew Configuration window . Step 9 of the Configuration W izard appears. 11. Click Finish . The CXP6000 Color Server A pplication workspace appears on y our screen. 12.
The Configuration Wizard If Recov ery Fails or is Unavailable 119 The Configuration Wizard If Recovery Fails or is Unavailable If ther e is no backup configuration in y our system, y ou need to perform the following steps to c onfigure y our system.
120 Chapter 2 – Reinstalling Your CXP6000 Color Server.
The Configuration Wizard If Recov ery Fails or is Unavailable 121 Configuring the Host Name The CXP6000 Color Server co ntains a default Computer N ame (H ostname) set from the factory . Check w ith your S ystem A dministrator if the comput er’ s name needs to be changed.
122 Chapter 2 – Reinstalling Your CXP6000 Color Server The Sy stem Pr operties dialog box appears..
The Configuration Wizard If Recov ery Fails or is Unavailable 123 2. Click the Properties button. The Id entification Changes window appear s. 3. In th e Computer name field, ty pe the new name for the computer .
124 Chapter 2 – Reinstalling Your CXP6000 Color Server 6. Click Next to cont inu e. Setting the Date and T ime T o set the date and time: 1. Check that the Date and T ime are set correctly and click Next .
The Configuration Wizard If Recov ery Fails or is Unavailable 125 The Date/T ime Pr operties dialog box appears. 2. Set the Time Zone and click OK . 3.
126 Chapter 2 – Reinstalling Your CXP6000 Color Server Setting the Default Measurement Units T o set the default measur ement units: ¾ Select the default measurement unit y ou want to use, and click Next .
The Configuration Wizard If Recov ery Fails or is Unavailable 127 Configuring the IP Address T o set the IP address: 1. The CXP6000 Color Server is set to DHCP server c onfiguration. Click Next to co ntinu e. 2. If y ou would like t o specify a specific IP a ddress, click the Change button.
128 Chapter 2 – Reinstalling Your CXP6000 Color Server The Local Area Connection P roperties dialog bo x appears, followed by the Inte rnet Prot ocol (TCP/IP) P roperties dialog bo x. 3. Select Use the following IP address and ty p e the IP address , Subnet mask and Default gateway in their corresponding bo xes.
The Configuration Wizard If Recov ery Fails or is Unavailable 129 Configuring the Apple T alk Zone This option enables you t o change the Apple T alk network zone that your CXP6000 Color Server will appear in. T o select an AppleT alk zone: 1. Click the Chang e button.
130 Chapter 2 – Reinstalling Your CXP6000 Color Server The Local Area Connection P roperties dialog bo x appears, followed by the Ap pleT alk Prot ocol P roperties dialog bo x. 2. Select the required z one from the list and click OK . 3. Click OK also in the Local Ar ea Connection Pr operties dialog box.
The Configuration Wizard If Recov ery Fails or is Unavailable 131 Completing the Configuration T o complete the configuration: 1. After the c onfiguration is complete, the View C onfiguration w indow is display ed.
132 Chapter 2 – Reinstalling Your CXP6000 Color Server 2. Click Close . Th e fo ll ow i n g w in dow ap p ea rs . 3. Click Finish to compl e te th e F irs t- ti me se tup. W hen the backup is complete, the follo wing message app ears. 4. Click OK . The CXP6000 Color Server w orkspace appears on y our screen.
The Configuration Wizard If Recov ery Fails or is Unavailable 133 5. If y ou want to change the administrator name and passw ord: a. On the W indows deskt op, rig ht-click My Comput er and select Manage . b. Expand the Local U sers and Gr oups tree, and select Users .
134 Chapter 2 – Reinstalling Your CXP6000 Color Server 3. On the W indows Start, click Start and f ollow the path, CXP6000>CXP6000 T ools>Novell Client Installation .
The Configuration Wizard If Recov ery Fails or is Unavailable 135 4. Click Install . Th e fo ll ow i n g w in dow ap p ea rs . 5. Click Reboot . 6. Yo u h a v e c o m p l e t e d Installing N ovell Client for Spire . Proc eed to Configuring Novell Client for Spir e on page 136.
136 Chapter 2 – Reinstalling Your CXP6000 Color Server Configuring Novell Client for Spire T o configure Nove ll Client for Spire: 1. After the syst em reboots, the N ovell Setup window appears. 2. Ty p e t h e T ree Name . If y ou do not know the name, click Br owse .
The Configuration Wizard If Recov ery Fails or is Unavailable 137 Th e fo ll ow i n g w in dow ap p ea rs . 3. Double-click the appr opriate Tr e e N a m e . The T ree N ame appears in the N ov ell Setup w indow . 4. Ty p e t h e Cont ext Name . If y ou do not know the name, click Br owse .
138 Chapter 2 – Reinstalling Your CXP6000 Color Server Th e fo ll ow i n g w in dow ap p ea rs . 5. Double-click the appr opriate Context Name . The Context N a me appears in the No vell Setup w indow .
The Configuration Wizard If Recov ery Fails or is Unavailable 139 5. Clear the N ovell for Client for W indows chec k box. 6. Make s ure t h a t Novell for Client for Windows is select ed, and click the Uninstall button. 7. Click Ye s twice. The CXP6000 Color Server reboots.
This P age is Intenti onally Left Blank.
Upgrading the Software Software Upgrade ...........................................................................142.
142 Chapter 3 – Upgrading the Software Software Upgrade T o update the software: 1. Before y ou begin upgr ading the CX P6000 Color Server softwar e you should backup your current c onfiguration.
Software Upgrade 143 At the e nd of the removal pr ocedure, the follo wing w indow appears. 6. Click OK . The following message appears. 7. Click OK . 8. Click Close t o close the Add/R emo ve Pr ograms w indow . 9. Close the Control P anel w indow . 10.
144 Chapter 3 – Upgrading the Software 11. Once the CXP6000 Color Server has r ebooted inser t the CXP6000 Color Ser ver Application Software CD#2. 12. Loca te the Setup.exe file and double-click this file to run Se tup . If a Serv ices or driv er fail message appears, click OK .
DFE Monitor General Information ........................................................................146.
146 Chapter 4 – DFE Monitor General Information The DFE M onitor dialog bo x provides general information about the follow ing: • Disk usage • Ne t wo r k s e t u p • Vi r t u a l p r i n te r s A ccess this view-only window by clicking on the DFE Animation on the CXP6000 Color Server w orkspace Status panel.
General Information 147 Network The Network tab enables to view the network details. The following details ar e available : • Hos t n am e a n d D o m a in • IP address and whether DHCP server is .
148 Chapter 4 – DFE Monitor Vi rtual Printers The Virtual Printers tab enables to view the defined v ir tual printers and also indicates if these are published on the netw ork.
Adding an External SCSI Device Adding an External Device ..............................................................150.
150 Chapter 5 – Adding an External SCSI Device Adding an External Device Connecting the External Device to the CXP6000 Color Server This section describes how t o connect the cable s from the e xternal device to the CXP6000 Color Se r ver. T o connect an external SCSI device: 1.
Adding an External Device 151 3. V erify that the dev ice is defined as ID1 or higher . 4. T urn the exte rnal device’ s po wer on. Initializing the External Device This section describes how t o initialize the external d ev ice. T o initialize the exter nal device: 1.
152 Chapter 5 – Adding an External SCSI Device The gray background in the disk space area, opposit e Disk 3 Re m o v a b l e , i n d i c a t e s t h a t t h e n e w e x t e r n a l d e v i c e i s n o t l o c a t e d o r n o t form atted .
Adding an External Device 153 3. Select the Format options you requir e and click Start . 4. After the formatting is complete, clic k OK . 5. Click Close . The Formatting C omplete message appears. 6. Click OK and then clic k Close . 7. On your W indows desktop , rig ht-click My Computer , and from the menu select Manage .
154 Chapter 5 – Adding an External SCSI Device Changing the External Device Drive Letter This section describes how to c hange the exte rnal dev ice drive lett er if the drive lett er is incorr ect. T o change the external device drive letter: 1. In the Comput er Management window , select Disk Management .
Adding an External Device 155 Th e fo ll ow i n g w in dow ap p ea rs . 4. Select Change Drive Letter and Path . Th e fo ll ow i n g w in dow ap p ea rs .
156 Chapter 5 – Adding an External SCSI Device Th e fo ll ow i n g w in dow ap p ea rs . 6. Assign a drive letter (not C, D , or E) and click OK . 7. Click Ye s to co nfirm the changed driv e letter . Th e fo ll ow i n g w in dow ap p ea rs s how in g t h e c ha n ge d d r ive l et te r .
Adding an External Device 157 Changing the CD/DVD-ROM Drive Letter This section describes how to initialize the exte rnal dev ice as the CD/D VD- R OM dr ive letter is incorrect. T o change the CD/DVD-ROM drive letter: 1. In the Comput er Management window , position the cursor in the CDRom (Letter) ar ea and right-click.
158 Chapter 5 – Adding an External SCSI Device 6. Click Ye s to confirm the change. The CD-R OM drive letter changes. Y ou have c ompleted all the procedur es and are ready to use your exter n al de v ice .
Novell NDS - Setup and Configuration Overview ........................................................................................160 Defining Novell NDS Printer Queues in the Novell NDS T ree .............162 Configuring IPX Printing ............
160 Appendix A – Novell NDS - Setup and Configuration Overview This appendix describes how to configur e the connection between a N ov ell NDS (N ovell Dir ectory Ser v ices) Server and the CXP6000 Color Server, in a N ovell w orking en vironment. T o configure this conn ection, the following procedur es are prefor med: 1.
Overview 161 T o perform these proc edures, you need: • A dministrative permissions assigned by the N ov ell Administrator . • The U ser N ame and P assword f or access t o the No vell NDS Server . • An acc ount in the appropriate NDS T ree and Cont ext w ith permissions to cr eate objects.
162 Appendix A – Novell NDS - Setup and Configuration Defining Novell NDS Printer Queues in the Novell NDS T ree Using the Novell NetWare Administrator Application P erform the follo w ing proc edures to cr eate the P rint Ser ver , Printer and Print Queues, using the NW Admin applicat ion: 1.
Defining Novell NDS Printer Queu es in the Novell NDS Tree 163 T o open the Netware Administrator Applicatio n: ¾ Open the N etware Administrator A pplication (provided by y our Nov e l l A d m i n i s t r a t o r ) . The N etW ar e Administrator window appears displa ying the No vell NDS window .
164 Appendix A – Novell NDS - Setup and Configuration T o define a Novell NDS Pr int Server: 1. Fr om the N ovell NDS windo w , select the required C ontext. 2. From th e Object menu, select Cr eate . The N ew O bject dialog box appears. 3. From th e Class of new object list, selec t Print Server .
Defining Novell NDS Printer Queu es in the Novell NDS Tree 165 5. In th e Print Server name bo x, ty pe nwprintserver . 6. Click the Create button . The N ovell NDS n wprintser ver printer is creat ed and appears in the Nov e l l N D S w i n d ow. . Notes: It is important to use only this server name, in lower case.
166 Appendix A – Novell NDS - Setup and Configuration T o define a Novell NDS printe r: 1. From th e Object menu, select Cr eate . The N ew O bject dialog box appears. 2. From th e Class of new object list, selec t Printer . 3. Click OK . The Crea te Printer dia log box appears.
Defining Novell NDS Printer Queu es in the Novell NDS Tree 167 T o define the Novell ND S Print Queue s: 1. From th e Object menu, select Cr eate . The N ew O bject dialog box appears. Notes: Both <hostname_ProcessPrint> and <hostname_Pr ocessStore> queues should be defined.
168 Appendix A – Novell NDS - Setup and Configuration 2. From Th e Class Of New Object List, select Print Queue . 3. Click OK . The Crea te Print Queue dialog bo x appears.
Defining Novell NDS Printer Queu es in the Novell NDS Tree 169 7. Click the Print Queue V olume icon. The Select Object dialog box appears. 8. Select any e xisting volume. 9. Click OK . The Print Queue v olume name appears in the Print Queue V olume bo x, in the Creat e Print Queue dialog bo x.
170 Appendix A – Novell NDS - Setup and Configuration 10. In the Cr eate Print Queue dialog bo x, click the Create button. The Print Queue is no w added to the N ov ell NDS w indow along with the nwprintser ver and the P rinter name (Spire_P rinter).
Defining Novell NDS Printer Queu es in the Novell NDS Tree 171 17. Click the Create button. Both queues ap pear now in the N ov ell NDS window ..
172 Appendix A – Novell NDS - Setup and Configuration T o assign a Printer name to nwprintserver Pri nt Server: 1. In the N ov ell NDS w indow , double-click nwprintserver . The Print Server dialog bo x appears. 2. Click the Assignments button t o open the Assignments tab .
Defining Novell NDS Printer Queu es in the Novell NDS Tree 173 3. Click the Add button. The Select Object dialog box appears..
174 Appendix A – Novell NDS - Setup and Configuration 4. Fr om the pr inters, select the pr inter name you ha ve defined (Spire_P rinter in our example), and clic k OK . The printer appears in the Printers list in the Print Server dialog box. 5. Click OK .
Defining Novell NDS Printer Queu es in the Novell NDS Tree 175 T o assign a Print Queue to the Printer: 1. In the N ov ell NDS w indow , double-click the P rinter name you ha ve defined (in our example Spire_Printer). The Printer dialog bo x appears. 2.
176 Appendix A – Novell NDS - Setup and Configuration 3. Click the Add button. The Select Object dialog box appears. 4. Select the Queue name <hostname_Pr ocessStor e> you ha ve defined, and click OK .
Defining Novell NDS Printer Queu es in the Novell NDS Tree 177 5. Click the Add button and select <hostname_Proc essPrint>. Both printer queues now appear in the Print queues list in the Printer dialog bo x.
178 Appendix A – Novell NDS - Setup and Configuration T o verify the new Novell NDS layout: 1. In the N ov ell NDS w indow , double-click nwprintserver . The Print Server dialog bo x appears. 2. Select the Print Layout tab. 3. Ve r i f y t h a t t h e nwprintserver ser ver , the pr inter and queues are display ed as shown in the above example.
Defining Novell NDS Printer Queu es in the Novell NDS Tree 179 Using the Novell NDS PConsole The CXP6000 Color Server V irtual Printers can be defined as N ov ell NDS Printe r Queues at the N ove ll NDS Ser v er , using the N ov ell NDS PConsole. This procedur e includes the follo w ing stages: T o use the Novell NDS PConsol e: 1.
180 Appendix A – Novell NDS - Setup and Configuration Configuring IPX Printing T o setup the CXP6000 Color Server IPX para meter: 1. In the CXP6000 Color Server w orkspace, click the Admin button. The Ad ministration w indow appears. 2. Double c lick Network Setup t o expand the folder .
Installing the Printer Drivers on a Novell Client Using the Adobe PS Application 181 Installing the Printer Drivers on a No vell Client Using the Adobe PS Application T o install the printer drivers on a Novell Client: 1. U se the A dobe PS Ap plication w ith the CXP6000 Color Server PPD (pro vi ded in the CXP6000 Color Ser ver, Utility folder).
182 Appendix A – Novell NDS - Setup and Configuration Follo wing is an example of the Printers window aft er installing the Nov e l l P r i n t e r Q u e u e . 3. P erform a test p rint using the installed N ov ell NetW are printer . Note: Note that the Novell Printer has the Novell NDS name as an extension, e.
Defining the CXP6000 Color Server as a No vell NDS Client 183 Defining the CXP6000 Color Server as a Novell NDS Client The following procedur e is performed only to connect the CXP6000 C olor Server to N ovell NDS, as a N ovell client. Y ou do not nee d to perform this proc edure in order t o print to the CXP6000 Color Server.
184 Appendix A – Novell NDS - Setup and Configuration 3. Click the Advanced butt on to expand the di alog box. 4. In th e NDS tab, clic k the T r ees button.
Defining the CXP6000 Color Server as a No vell NDS Client 185 The T ree window appears. 5. Select the required tree and c lick OK . The tree appears in the Tr e e bo x in the NDS tab . 6. In th e NDS tab, click the Contexts button. The cont ext window appears.
186 Appendix A – Novell NDS - Setup and Configuration 7. Select the required c ontext full co ntainers path, and click OK . The Context full co ntainers path appears in the Context bo x in the NDS tab. 8. In th e NDS tab, clic k the Servers button. The server window appears.
Defining the CXP6000 Color Server as a No vell NDS Client 187 A Res ults window appears briefly to indica te that the c onnection was established. If an error message appears inst ead, contact your N ov ell Adm i n i s t r a to r . The CXP6000 Color Server is no w defined as a No vell NDS client.
This P age is Intenti onally Left Blank.
Een belangrijk punt na aankoop van elk apparaat Xerox 6060 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Xerox 6060 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Xerox 6060 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Xerox 6060 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Xerox 6060 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Xerox 6060 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Xerox 6060 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Xerox 6060 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
