Gebruiksaanwijzing /service van het product Phaser 3320 van de fabrikant Xerox
Ga naar pagina of 111
USER’S MANUAL Revision 1.0b X9DRH-7F X9DRH-iF X9DRH-7TF X9DRH-iTF.
Manual Revision 1.0b Release Date: Dec. 13, 2012 Unless you request and receive written permission from Super Micro Computer , Inc., you may not copy any part of this document.
Preface This manual is written for system integrators, PC technicians and knowledgeable PC users. It provides information for the installation and use of the X9DRH-7F/-iF/-7TF/-iTF motherboard.
iv Conventions Used in the Manual Pay special attention to the following symbols for proper system installation and to prevent damage to the system or injury to yourself: W arning: Important information given to ensure proper system installation or to prevent damage to the components or injury to yourself.
Preface v Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (T echnical Support) Web Site: www .
vi T able of Contents Preface Chapter 1 Overview 1-1 Overview ......................................................................................................... 1-1 1-2 Processor and Chipset Overview ............................................
vii T able of Contents Front Control Panel ....................................................................................... 2-21 Front Control Panel Pin Denitions ............................................................... 2-22 NMI Button .
viii SAS Fault LED ......................................................................................... 2-40 2-10 Serial A T A Connections ................................................................................. 2-41 Serial A T A Ports..
Chapter 1: Overview 1-1 Chapter 1 Overview 1-1 Overview Checklist Congratulations on purchasing your computer motherboard from an acknowledged leader in the industry . Supermicro boards are designed with the utmost attention to detail to provide you with the highest standards in quality and performance.
1-2 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual Motherboard Image Note : All graphics shown in this manual were based upon the latest PCB Revision available at the time of publishing of the manual. The motherboard you've received may or may not look exactly the same as the graphics shown in this manual.
Chapter 1: Overview 1-3 Motherboard Layout Note 1: LAN1/LAN2 ports support 1G LAN connections on the X9DRH- 7F/-iF , but support 10G connections on the 7TF/iTF models. Note 2: SAS 0~3/SAS 4~7 are available on the X9DRH-7F/-7TF only . Note 3: For the latest CPU/Memory updates, please refer to our website at http://www .
1-4 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual Notes: • See Chapter 3 for detailed information on jumpers, I/O ports and JF1 front panel connections. • " " indicates the location of "Pin 1". • Jumpers/LED Indicators not indicated are for testing only .
Chapter 1: Overview 1-5 X9DRH-7F/-iF/-7TF/-iTF Jumpers Jumper Description Default Setting JBT1 Clear CMOS See Chapter 3 JI 2 C1/JI 2 C2 SMB to PCI-E Slots Pins 2-3 (Normal) JPB1 BMC Enable Pins 1-2 (E.
1-6 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual W arning ! T o prevent damage to the power supply or motherboard, please use a power supply that contains a 24-pin and two 8-pin power connectors. Be sure to connect these power connectors to the 24-pin power connector (J22) and the 8-pin power connectors (JPWR1/JPWR2) on the motherboard.
Chapter 1: Overview 1-7 Motherboard Features CPU • Dual Intel ® E5-2600 Series (Socket R) processors; each processor supports two full-width Intel Quick - Path Interconnect (QPI) links (with support of up to 8.
1-8 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual I/O Devices (cont.) SAS Connections ( X9DRH-7F/-7TF ) • LSI SAS 2208 Controller (w/hardware RAID support) • SAS Ports 0~3, 4~7 • RAID Support RAID 0, 1, 5, 6, 10, 50, 60 (Hardware RAID) IPMI 2.
Chapter 1: Overview 1-9 PC Health Monitoring • CPU Thermal Trip support • Thermal Monitor 2 (TM2) support Fan Control • Fan status monitoring with rmware 4-pin (Pulse Width Modulatio.
1-10 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual System Block Diagram Notes: 1. This is a general block diagram and may not exactly represent the features on your motherboard. See the Motherboard Features pages for the actual specications of each motherboard.
Chapter 1: Overview 1-1 1 1-2 Processor and Chipset Overview Buil t upo n th e fun ct io nali t y and t he c ap abi lit ies o f the I ntel E5 -260 0 S er ie s (Soc ket R) proc es so r and t he C 6 02 .
1-12 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual 1-3 Special Features Recovery from AC Power Loss Basic I/O System (BIOS) provides a setting that determines how the system will respond when AC power is lost and then restored to the system.
Chapter 1: Overview 1-13 to prov ide yo u wi th war ni ngs w hen t he sys tem tem pe ratu re, CP U temp era ture s, volt age s and fa n s pe eds go b eyond a pre de ne d range. 1-5 ACPI Features ACPI stands for Advanced Conguration and Power Interface.
1-14 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual It is strongly recommended that you use a high quality power supply that meets A TX power supply Specication 2.02 or above. It must also be SSI compliant. (For more information, please refer to the website at http://www .
Chapter 1: Overview 1-15 Manageability Engine (ME) The Manageability Engine, which is an ARC controller embedded in the PCH, provides Server Platform Services (SPS) to your system. The services provided by SPS are different from those provided by the ME on client platforms.
1-16 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual • Provides remote Hardware Health Monitoring via IPMI. Key features • Provides Network Management Security via remote access/console redirection.
Chapter 2: Installation 2-1 Chapter 2 Installation 2-1 Standardized W arning Statements The following statements are industry-standard warnings, provided to warn the user of situations which have the potential for bodily injury .
2-2 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual Attention Danger d'explosion si la pile n'est pas remplacée correctement. Ne la remplacer que par une pile de type semblable ou équivalent, recommandée par le fabricant. Jeter les piles usagées conformément aux instructions du fabricant.
Chapter 2: Installation 2-3 Product Disposal W arning! Ultimate disposal of this product should be handled according to all national laws and regulations.
2-4 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual 2-2 Static-Sensitive Devices Electrostatic Discharge (ESD) can damage electronic com ponents. T o avoid dam - aging your system board, it is important to handle it very carefully . The following measures are generally sufcient to protect your equipment from ESD.
Chapter 2: Installation 2-5 OPEN 1st W ARNING! 2-3 Processor and Heatsink Installation W arning : When handling the processor package, avoid placing direct pressure on the label area. Notes: 1. Always connect the power cord last, and always remove it before adding, removing or changing any hardware components.
2-6 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual W ARNING! OPEN 1st W ARNING! OPEN 1st W ARNING! OPEN 1st W ARNING! Gently push down to pop the load plate open. 2. Press the second load lever labeled 'Close 1st' to release the load plate that covers the CPU socket from its locking position.
Chapter 2: Installation 2-7 W ARNING! 1. Use you r i ndex nger s t o loose n t he lever an d o pe n t he load plate. 2. Use your thumb and index nger to hold the CPU on its edges. Align the CPU keys, which are semi-circle cutouts, against the socket keys.
2-8 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual OPEN 1st OPEN 1st 4. With the CPU inside the socket, inspect the four corners of the CPU to make sure that the CPU is properly installed.
Chapter 2: Installation 2-9 OPEN 1st Motherboard Screw#1 Screw#2 Installing a Passive CPU Heatsink 1. Do not apply any thermal grease to the heatsink or the CPU die -- the re - quired amount has already been applied.
2-10 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual OPEN 1st Removing the Heatsink W arning: We do not recommend that the CPU or the heatsink be removed. However , if you do need to uninstall the heatsink, please follow the instructions below to uninstall the heatsink to prevent damage done to the CPU or the CPU socket.
Chapter 2: Installation 2-1 1 X9DRH-7F/iF/7TF/iF Rev. 1.02 Release T abs Notches 2-4 Installing and Removing the Memory Modules Note : Check Supermicro's Websi te for re commended memory modules. CAU T I O N Exe rc ise ex tr eme c a re wh en in sta lli ng or r emov ing D IM M mod ule s to pr event any po ssi ble d ama ge.
2-12 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual Memory Support for the X9DRH-7F/-iF/-7TF/-iTF Motherboard The X9DRH-7F/-iF/-7TF/-iTF Motherboard supports up to 512 GB of 240-pin Reg - istered.
Chapter 2: Installation 2-13 Populating UDI MM ( ECC/Non-ECC) Memory Modules Intel E5-2600 Series Processor UDIMM Memory Support Ranks Per DIMM & Data Width Memory Capacity Per DIMM (See the Note .
2-14 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual Populating LRDI MM (E CC) Memory Modules Intel E5-2600 Series Processor LRDIMM Memory Support Ranks Per DIMM & Data Width (See the Note Bel.
Chapter 2: Installation 2-15 2-5 Motherboard Installation All motherboards have standard mounting holes to t dif ferent types of chassis. Make sure that the locations of all the mounting holes for both motherboard and chassis match.
2-16 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual Installing the Motherboard 1. Install the I/O shield into the chassis. 2. Locate the mounting holes on the motherboard. 3. Locate the matching mounting holes on the chassis. Align the mounting holes on the motherboard with the mounting holes on the chassis.
Chapter 2: Installation 2-17 2-6 Control Panel Connectors and I/O Ports The I/O por t s are color co ded in confo rm anc e with the PC 99 s pe c i ca ti on. See the p ic tur e bel ow fo r the c o lo rs a nd lo c ati ons o f the va ri ous I /O p or t s.
2-18 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual JS3 SAS4-7 JPWR1 JPWR2 JTPM1 T-SGPIO1 T-SGPIO2 FANB FANA FAN1 FAN6 JF1 JOH1 JWD JPB1 JPG1 JPLAN1 JBT1 BT1 J21 JD1 JIPMB1 SP1 LE1 LEDS1 DM1 VGA .
Chapter 2: Installation 2-19 1 2 3 Video Connection One video (VGA) port is located next to LAN2 Port on the I/O backplane. Refer to the board layout below for the location. 1. COM1 2. COM2 3. VGA Serial Ports T wo COM connections (COM1 & COM2) are located on the mother - board.
2-20 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual 1. LAN1 (GLAN for -7F/iF , 10 G for-7TF/iTF) 2. LAN2 (GLAN for -7F/iF , 10 G for-7TF/iTF) 3. IPMI_LAN Ethernet Ports T wo Gigabit Ethernet ports (LAN1/2) are located on the I/O backplane on the motherboard to provide inter - net connections.
Chapter 2: Installation 2-21 Front Control Panel JF1 contains header pins for various buttons and indicators that are normally lo - cated on a control panel at the front of the chassis. These connectors are designed specically for use with Supermicro's server chassis.
2-22 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual Po we r Bu tt on OH/Fan Fail LE D 1 NIC1 LED Re se t Butt on 2 HDD LE D Po we r LE D Re se t PWR Vc c Vc c Vc c Vc c Gr ound Gr ound 19 20 Vc c X Gr ound NM I X Vc c PWR Fail LED NIC2 LE D Power LED The Pow er LED c o nne ct ion i s lo c ated on pi ns 15 and 16 of JF 1.
Chapter 2: Installation 2-23 Po we r Bu tt on OH/Fan Fail LE D 1 NIC1 LED Re se t Butt on 2 HDD LE D Po we r LE D Re se t PWR Vc c Vc c Vc c Vc c Gr ound Gr ound 19 20 Vc c X Gr ound NM I X Vc c PWR F.
2-24 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual Po we r Bu tt on OH/Fan Fail LE D 1 NIC1 LED Re se t Butt on 2 HDD LE D Po we r LE D Re se t PWR Vc c Vc c Vc c Vc c Gr ound Gr ound 19 20 Vc c X Gr ound NM I X Vc c PWR Fail LED NIC2 LE D B Power Fail LED The Po wer Fail LE D co nne c tio n is loc at ed on p ins 5 a nd 6 of J F 1.
Chapter 2: Installation 2-25 Po we r Bu tt on OH/Fan Fail LE D 1 NIC1 LED Re se t Butt on 2 HDD LE D Po we r LE D Re se t PWR Vc c Vc c Vc c Vc c Gr ound Gr ound 19 20 Vc c X Gr ound NM I X Vc c PWR Fail LED NIC2 LE D Power Button The Power Button connection is located on pins 1 and 2 of JF1.
2-26 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual JS3 SAS4-7 JPWR1 JPWR2 JTPM1 T-SGPIO1 T-SGPIO2 FANB FANA FAN1 FAN6 JF1 JOH1 JWD JPB1 JPG1 JPLAN1 JBT1 BT1 J21 JD1 JIPMB1 SP1 LE1 LEDS1 DM1 VGA .
Chapter 2: Installation 2-27 JS3 SAS4-7 JPWR1 JPWR2 JTPM1 T-SGPIO1 T-SGPIO2 FANB FANA FAN1 FAN6 JF1 JOH1 JWD JPB1 JPG1 JPLAN1 JBT1 BT1 J21 JD1 JIPMB1 SP1 LE1 LEDS1 DM1 VGA JSD1 LAN1 JSTBY1 S-SAT A2 S-.
2-28 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual JS3 SAS4-7 JPWR1 JPWR2 JTPM1 T-SGPIO1 T-SGPIO2 FANB FANA FAN1 FAN6 JF1 JOH1 JWD JPB1 JPG1 JPLAN1 JBT1 BT1 J21 JD1 JIPMB1 SP1 LE1 LEDS1 DM1 VGA .
Chapter 2: Installation 2-29 JS3 SAS4-7 JPWR1 JPWR2 JTPM1 T-SGPIO1 T-SGPIO2 FANB FANA FAN1 FAN6 JF1 JOH1 JWD JPB1 JPG1 JPLAN1 JBT1 BT1 J21 JD1 JIPMB1 SP1 LE1 LEDS1 DM1 VGA JSD1 LAN1 JSTBY1 S-SAT A2 S-.
2-30 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual JS3 SAS4-7 JPWR1 JPWR2 JTPM1 T-SGPIO1 T-SGPIO2 FANB FANA FAN1 FAN6 JF1 JOH1 JWD JPB1 JPG1 JPLAN1 JBT1 BT1 J21 JD1 JIPMB1 SP1 LE1 LEDS1 DM1 VGA .
Chapter 2: Installation 2-31 JS3 SAS4-7 JPWR1 JPWR2 JTPM1 T-SGPIO1 T-SGPIO2 FANB FANA FAN1 FAN6 JF1 JOH1 JWD JPB1 JPG1 JPLAN1 JBT1 BT1 J21 JD1 JIPMB1 SP1 LE1 LEDS1 DM1 VGA JSD1 LAN1 JSTBY1 S-SAT A2 S-.
2-32 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual A. BBU (Optional for X9DRH-7F/7TPF) B. Onboard CMOS Battery Onboard CMOS Battery The onboard CMOS battery is located next to memory slot P1-DIMMC1. Be sure to use the type of battery recommended by the manu - facturer .
Chapter 2: Installation 2-33 2-8 Jumper Settings Explanation of Jumpers T o modify the operation of the motherboard, jumpers can be used to choose between optional settings. Jumpers create shorts be - tween two pins to change the function of the connector .
2-34 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual JS3 SAS4-7 JPWR1 JPWR2 JTPM1 T-SGPIO1 T-SGPIO2 FANB FANA FAN1 FAN6 JF1 JOH1 JWD JPB1 JPG1 JPLAN1 JBT1 BT1 J21 JD1 JIPMB1 SP1 LE1 LEDS1 DM1 VGA .
Chapter 2: Installation 2-35 A. VGA Enabled B. BMC Enabled VGA Enable Jumper JPG1 allows the user to en - able the onboard VGA connectors. The default setting is 1-2 to enable the con - nection.
2-36 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual A. JPS1 JS3 SAS4-7 JPWR1 JPWR2 JTPM1 T-SGPIO1 T-SGPIO2 FANB FANA FAN1 FAN6 JF1 JOH1 JWD JPB1 JPG1 JPLAN1 JBT1 BT1 J21 JD1 JIPMB1 SP1 LE1 LEDS1 .
Chapter 2: Installation 2-37 JS3 SAS4-7 JPWR1 JPWR2 JTPM1 T-SGPIO1 T-SGPIO2 FANB FANA FAN1 FAN6 JF1 JOH1 JWD JPB1 JPG1 JPLAN1 JBT1 BT1 J21 JD1 JIPMB1 SP1 LE1 LEDS1 DM1 VGA JSD1 LAN1 JSTBY1 S-SAT A2 S-.
2-38 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual 2-9 Onboard LED Indicators A. Ethernet Port LEDs B. IPMI LAN LEDs IPMI Dedicated LAN LEDs In addition to the Gigabit Ethernet ports, an IPMI Dedicated LAN is also located above the Backplane USB ports 0/1 on the motherboard .
Chapter 2: Installation 2-39 Onboard Power LED An Onboard Power LED is located at LE1 on the motherboard. When this LED is on, the system is on. Be sure to turn off the system and unplug the power cord before removing or installing components. See the tables at right for more information.
2-40 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual JS3 SAS4-7 JPWR1 JPWR2 JTPM1 T-SGPIO1 T-SGPIO2 FANB FANA FAN1 FAN6 JF1 JOH1 JWD JPB1 JPG1 JPLAN1 JBT1 BT1 J21 JD1 JIPMB1 SP1 LE1 LEDS1 DM1 VGA .
Chapter 2: Installation 2-41 JS3 SAS4-7 JPWR1 JPWR2 JTPM1 T-SGPIO1 T-SGPIO2 FANB FANA FAN1 FAN6 JF1 JOH1 JWD JPB1 JPG1 JPLAN1 JBT1 BT1 J21 JD1 JIPMB1 SP1 LE1 LEDS1 DM1 VGA JSD1 LAN1 JSTBY1 S-SAT A2 S-.
2-42 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual Notes.
3-1 Chapter 3: Troubleshooting Chapter 3 T roubleshooting 3-1 T rou bleshooting Procedures Use the following procedures to troubleshoot your system. If you have followed all of the procedures below and still need assistance, refer to the ‘T echnical Support Procedures’ and/or ‘Returning Merchandise for Service’ section(s) in this chapter .
3-2 X9DRH-7F/-iF/-7TF/-iTF Motherboard User's Manual No Video 1. If the power is on, but you have no video, remove all the add-on cards and cables. 2. Use the speaker to determine if any beep codes exist. Refer to Appendix A for details on beep codes.
3-3 Chapter 3: Troubleshooting Memory Errors When a No_Memory_Beep_Code is issued by the system, check the following: 1. Make sure that the memory modules are compatible with the system and that the DIMM modules are properly and fully installed. (For memory compatibility , refer to the Memory Compatibility Chart posted on our Website @ http://www .
3-4 X9DRH-7F/-iF/-7TF/-iTF Motherboard User's Manual range. Also check the front panel Overheat LED, and make sure that the Overheat LED is not on. 5. Adequate power supply: Make sure that the power supply provides adequate power to the system. Make sure that all power connectors are connected.
3-5 Chapter 3: Troubleshooting troubleshooting services. They should know of any possible problem(s) with the specic system conguration that was sold to you. 1. Please go through the ‘T roubleshooting Procedures’ and 'Frequently Asked Question' (F AQ) sections in this chapter or see the F AQs on our website ( http://www .
3-6 X9DRH-7F/-iF/-7TF/-iTF Motherboard User's Manual choose from the zip le and the .exe le. If you choose the zip BIOS le, please unzip the BIOS le onto a bootable USB device. Run the batch le using the format AMI.bat lename.rom from your bootable USB device to ash the BIOS.
Chapter 4: AMI BIOS 4-1 Chapter 4 BIOS 4-1 Introduction This chapter describes the AMI BIOS Setup utility for the X9DRH-7F/-iF/-7TF/-iTF . It also provides the instructions on how to navigate the AMI BIOS Setup utility sc reens . The AMI ROM BIOS is stored in a Flash EEPROM and can be easily updated.
4-2 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual How T o Change the Conguration Data The conguration data that determines the system parameters may be changed by entering the AMI BIOS Setup utility . This Setup utility can be accessed by pressing <Delete> at the appropriate time during system boot.
Chapter 4: AMI BIOS 4-3 System Time/System Date Use this option to change the system time and date. Highlight System Time or System Date using the arrow keys. Enter new values through the keyboard and press <Enter>. Press the <T ab> key to move between elds.
4-4 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual 4-3 Advanced Setup Congurations Use the arrow keys to select Advanced and press <Enter> to access the following submenu items: Boot Feature Quiet Boot Set this value to allow the bootup screen options to be modied between POST messages or the OEM logo.
Chapter 4: AMI BIOS 4-5 Interrupt 19 Capture Interrupt 19 is the software interrupt that handles the boot disk function. When this item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt 19 at boot and allow the drives that are attached to these host adaptors to function as bootable disks.
4-6 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual • CPU Stepping • Maximum CPU Speed • Minimum CPU Speed • Processor Cores • Intel HT(Hyper-Threading) T echnology •.
Chapter 4: AMI BIOS 4-7 Execute-Disable Bit Capability (A vailable if supported by the OS & the CPU) Set to Enabled to enable the Execute Disable Bit, which will allow the processor to designate a.
4-8 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual Power T echn ology Select Energy Efcient to support power-saving mode. Select Custom to custom - ize system power settings. Select Disabled to disable power-saving settings. The options are Disable, Energy Efcient and Custom.
Chapter 4: AMI BIOS 4-9 Package C State Limit If set to Auto, the AMI BIOS will automatically set the limit on the C-State package register . The options are C0, C2, C6, C7, and No Limit .
4-10 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual Chipset Conguration North Bridge This feature allows the user to congure the settings for the Intel North Bridge.
Chapter 4: AMI BIOS 4-1 1 IOU2 - PCIe Port This feature allows the user to set the PCI-Exp bus speed between IOU2 and PCIe port. The default setting is x8x8 . Slot 2 Link Speed Select GEN1 to enable PCI-Exp Generation 1 support for Slot 2 Port. Select GEN2 to enable PCI-Exp Generation 2 support for Slot 2 Port.
4-12 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual Current QPI Link Frequency This item displays the current frequency of the QPI Link. Isoc Select Enabled to enable Isochronous support to meet QoS (Quality of Service) requirements. This feature is especially important for virtualization technology .
Chapter 4: AMI BIOS 4-13 DDR Speed Use this feature to force a DDR3 memory module to run at a frequency other than what is indicated in the system specication. The options are Auto , Force DDR3- 800, Force DDR3-1066, Force DDR3-1333, Force DOR3-1600 and Force SPD.
4-14 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual Thermal Throttling Throttling improves reliability and reduces power consumption in the proces - sor via automatic voltage control during processor idle states. The options are Disabled and CL TT (Closed Loop Thermal Throttling).
Chapter 4: AMI BIOS 4-15 SA T A Conguration When this submenu is selected, the AMI BIOS automatically detects the presence of IDE or SA T A devices and displays the following items. SA T A Port0~SA T A Port5 The AMI BIOS displays the status of each SA T A port as detected by the BIOS.
4-16 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual RAID Mode The following items are displayed when RAID Mode is selected: Port 0~5 Hot Plug Select Enabled to enable hot-plug support for a port specied by the user . The options are Enabled and Disabled.
Chapter 4: AMI BIOS 4-17 PERR# Generation Select Enabled to allow a PCI device to generate a PERR number for a PCI Bus Signal Error Event. The options are Enabled and Disabled . SERR# Generation Select Enabled to allow a PCI device to generate a SERR number for a PCI Bus Signal Error Event.
4-18 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual VGA Priority Use this feature to specify which graphics controller to be used as the primary boot device.
Chapter 4: AMI BIOS 4-19 Device Settings This item displays the settings of Serial Port 2. Change Settings This option species the base I/O port address and the Interrupt Request address of Serial Port 2. Select Disabled to prevent the serial port from accessing any system resources.
4-20 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual Bits Per Second This item sets the transmission speed for a serial port used in Console Redirec - tion. Make sure that the same speed is used in the host computer and the client computer . A lower transmission speed may be required for long and busy lines.
Chapter 4: AMI BIOS 4-21 Resolution 100x31 Select Enabled for extended-terminal resolution support. The options are Dis - abled and Enabled . Legacy OS Redirection Use this feature to select the number of rows and columns used in Console Redirection for legacy OS support.
4-22 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual Flow Control This feature allows the user to set the ow control for Console Redirection to prevent data loss caused by buffer overow . Send a "Stop" signal to stop send - ing data when the receiving buffer is full.
Chapter 4: AMI BIOS 4-23 TPM State Select Enabled to enable TPM security settings to improve data integrity and network security . The options are Disabled and Enabled . Pending Operation Use this item to schedule an operation for the security device.
4-24 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual Intel TXT (L T -SX) Dependencies This feature displays the features that need to be enabled for the Intel T rusted Execution T echnology to work properly in the system.
Chapter 4: AMI BIOS 4-25 4-4 Event Logs Use this menu to congure Event Log settings. Change SmBIOS Event Log Settings Enabling/Disabling Options Smbios Event Log Change this item to enable or disable all features of the Smbios Event Logging during boot.
4-26 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual Erasing Settings Erase Event Log Select Enabled to erase the SMBIOS (System Management BIOS) Event Log, which is completed before a event logging is initialized upon system reboot. The options are No , Y es, Next reset, and Y es, Every reset.
Chapter 4: AMI BIOS 4-27 4-5 IPMI Use this menu to congure Intelligent Platform Management Interface (IPMI) set - tings. System Event Log Enabling/Disabling Options SEL Components Select Enabled for all system event logging at bootup. The options are Enabled and Disabled.
4-28 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual Log EFI Status Codes Select Enabled to log EFI (Extensible Firmware Interface) Status Codes, Error Codes or Progress Codes. The options are disabled an Enabled . Note : After making changes on a setting, be sure to reboot the system for the changes to take effect.
Chapter 4: AMI BIOS 4-29 4-6 Boot Thi s menu a llo ws the u ser to c on g ure t he fo llow ing b oot s et tin gs fo r t he sys tem. Boot Option Priorities Boo t O pt io n #1/ Boo t Op t io n # 2 / Bo ot O pt io n # 3 Use t his fe atu re to sp ec if y t he s equ enc e of b oot dev ic e pr io r it y.
4-30 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual 4-7 Security This menu allows the user to congure the following security settings for the system. Administrator Password Use this feature to set the Administrator Password which is required to enter the BIOS setup utility .
Chapter 4: AMI BIOS 4-31 4-8 Save & Exit This menu allows the user to congure the Save and Exit settings for the system. Discard Changes and Exit Select this option to quit the BIOS Setup without making any permanent changes to the system conguration, and reboot the computer .
4-32 X9DRH-7F/-iF/-7TF/-iTF Motherboard User ’s Manual Discard Changes Select this feature and press <Enter> to discard all the changes and return to the BIOS setup.
A-1 Appendix A: BIOS POST Error Codes Appendix A BIOS Error Beep Codes During the POST (Power-On Self-T est) routines, which are performed at each system boot, errors may occur . Non-fatal errors are those which, in most cases, allow the system to continue to boot.
A-2 X9DRH-7F/-iF/-7TF/-iTF User's Manual Notes.
Appendix B: Software Installation Instructions B-1 Driver/T ool Installation Display Screen Note 1 . Click the icons showing a hand writing on the paper to view the readme les for each item. Click a computer icon to the right of an item to install an item (from top to the bottom) one at a time.
B-2 X9DRH-7F/-iF/-7TF/-iTF Motherboard User's Manual SuperDoctor III Interface Display Screen-I (Health Information) B-2 Conguring Su perDoctor III The SuperDoctor III program is a Web-based management tool t hat supports remote management capability .
Appendix B: Software Installation Instructions B-3 SuperDoctor III Interface Display Screen-II (Remote Control) Note : The SD III u til it y and t he u ser g uid e ca n be do wnl oad ed f ro m our websit e at: h ttp://ww w.s upermicro.com/products/a cc essories/soft ware/ Sup er Do ct or III .
B-4 X9DRH-7F/-iF/-7TF/-iTF Motherboard User's Manual Notes.
(Disclaimer Continued) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, .
Een belangrijk punt na aankoop van elk apparaat Xerox Phaser 3320 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Xerox Phaser 3320 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Xerox Phaser 3320 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Xerox Phaser 3320 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Xerox Phaser 3320 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Xerox Phaser 3320 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Xerox Phaser 3320 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Xerox Phaser 3320 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.