Gebruiksaanwijzing /service van het product PDM-1 van de fabrikant Yamaha
Ga naar pagina of 40
U PDM-1 HIGH DEFINITION PLASMA MONIT OR Operating Instructions English R - S T A N D B Y G P O W E R O N I N P U T – V O L + P O W E R / INPUT SURROUND VOL NR PICTURE SOUND SET UP ASPECT PICTURE POS. /SIZE OFF TIMER PC INPUT SURROUND VOL NR PICTURE SOUND SET UP ASPECT PICTURE POS.
2 W ARNING: T o reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel.
3 Important Safety Instructions 1) Read these instructions. All the safety and operating instructions should be read before the appliance is operated. 2) Keep these instructions. The safety and operating instructions should be retained for future reference.
4 Note: Do not allow a still picture to be displayed for an extended period, as this can cause a permanent after- image to remain on the plasma display . Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.
5 CANADIAN NOTICE: This Class B digital apparatus complies with Canadian ICES-003. COMPLIANCE INFORMA TION ST A TEMENT (DECLARA TION OF CONFORMITY PROCEDURE) Responsible Party: Y amaha Electronics Cor.
6 Safety Precautions W ARNING Set up Do not place the plasma display on sloped or unstable surfaces. • The plasma display may fall off or tip over . Do not place any objects on top of the plasma display .
7 CAUTION This plasma display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury . • Speakers (main speaker) ................
8 INPUT SURROUND VOL NR PICTURE SOUND SET UP ASPECT PICTURE POS. /SIZE OFF TIMER PC Accessories Accessories Supplied Check that you have the Accessories and items shown Remote Control T ransmitter EUR.
9 Remote Control Batteries Requires two AA batteries. 1. T urn the transmitter face down. Press and slide off the battery cover . 2. Install the batteries as shown in the battery compartment. (Polarity + or – must match the markings in the compartment.
10 Basic Controls R - ST ANDBY G POWER ON INPUT — VOL + Main POWER ON/OFF Switch VOLUME Adjustment Push the V olume Up “ + ” or Down “–” button to increase or decrease the sound volume level.
11 Connections SPEAKER T erminals (R) – Cable fixing bands Secure any excess cables with bands, as required. SPEAKER T erminals (L) From EXIT monitor T erminal on Computer (see page 15) Pass the attached cable fixing band through the clip as shown in the figure.
12 Connections Basic connection Luminance earth Luminance in Chrominance earth Chrominance in S VIDEO 4 pin socket Component Video cable COMPONENT VIDEO AV amplifer Video cable VIDEO S VIDEO S Video c.
13 Notes: (1) Change the “ COMPONENT/RGB-IN ” setting in the “ SET UP ” menu to “ COMPONENT ” . (see page 34) (2) Any equipment and cables other than the display illustrated above are not included. (3) Choose one connecting cable from Video, S V ideo or Component V ideo, that is suitable for the equipment being used.
14 3 2 1 Remov e the tubes from the ends of the speaker cab les. P R /C R /R P B /C B /B Y/G COMPONENT/RGB IN A V IN VD HD S VIDEO VIDEO RL AUDIO RL A UDIO 1 2 Audio OUT Video OUT RL Audio OUT S Video.
15 Connections PC Input T erminals connection Notes: (1) Computer signals which can be input are those with a horizontal scanning frequency of 15.6 to 1 10 kHz and vertical scanning frequency of 48 to 120 Hz. (However , the image will not be displayed properly if the signals exceed 1,200 lines.
16 Signal Names for D-sub 15P Connector Pin layout for PC input terminal 1 678 3 9 45 10 15 14 13 12 11 2 Pin No. 1 2 3 4 5 Pin No. 6 7 8 9 10 Pin No. 11 12 13 14 15 Signal Name R G B GND (Ground) GND.
17 Connections SERIAL T erminals connection Notes: (1) Use the RS-232C cable to connect the computer to the plasma display . (2) The computer shown is for example purposes only . (3) Additional equipment and cables shown are not supplied with this set.
18 Power ON/OFF Connecting the plug to the W all Outlet Push the switch on the plasma display to turn the set on POWER-ON. Power Indicator: Green Example: The screen below is displayed for a while after the plasma display is turned on. (setting condition is an example.
19 Select the Input Signal Press the INPUT button to select the input video signal desired from equipment such as a VCR which has been connected to the plasma display .
20 INPUT SURROUND VOL NR PICTURE SOUND SET UP ASPECT PICTURE POS. /SIZE OFF TIMER PC On-Screen Menu Display from Remote Control PICTURE NORMALIZE PICTURE MENU BRIGHTNESS COLOR ST ANDARD 0 0 TINT COLOR.
21 On-Screen Menu Display from Remote Control Note: “ SIGNAL ” setup menu displays a different setting condition for each input signal. (see page 19) T o SIGNAL screen for RGB (see page 36) T o SI.
22 ASPECT Controls The plasma display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. INPUT SURROUND VOL NR PICTURE SOUND SET UP ASPECT PICTURE POS. /SIZE OFF TIMER PC ASPECT ASPECT button The aspect mode changes each time the ASPECT button is pressed.
23 ASPECT Controls Mode NORMAL ZOOM FULL JUST AUTO Explanation NORMAL will display a 4:3 picture at its standard 4:3 size. ZOOM mode magnifies the central section of the picture. FULL will display the picture at its maximum size but with sight elongation.
24 Adjusting PICTURE POSITION/SIZE INPUT SURROUND VOL NR PICTURE SOUND SET UP ASPECT PICTURE POS. /SIZE OFF TIMER PC R PICTURE POS. /SIZE Adjusting screen PICTURE POS. /SIZE Press to display the PICTURE POS./ SIZE menu. NORMAL PICTURE POS./SIZE NORMALIZE H-POS H-SIZE V -POS V -SIZE Press to adjust POS.
25 Helpful Hint ( / NORMALIZE Normalization) Adjusting PICTURE POS./SIZE H-POS H-SIZE V -POS V -SIZE CLOCK PHASE (RGB/PC in Mode) When the Position Right “ ” button is pressed When the Position Ri.
26 MUTE Helpful Hint ( / NORMALIZE Normalization) SOUND Adjustment 1 2 Select to adjust each item. Press to select the desired adjustment menu. Select the desired level by listening to the sound.
27 SURROUND Controls SURROUND Button The benefits of surround sound are enormous. Y ou can be completely enveloped in sound; just as if you were at a concert hall or cinema. The surround setting switches on and off each time the SURROUND button is pressed.
28 PICTURE NORMALIZE PICTURE MENU BRIGHTNESS COLOR ST ANDARD 0 0 TINT COLOR TEMP NORMAL ADV ANCED SETTINGS ON PICTURE 20 0 0 SHARPNESS NORMAL Helpful Hint ( / NORMALIZE Normalization) PICTURE NORMALIZ.
29 Note: In PICTURE, there is nor a noticeable change even when contrast is increased with a bright picture or reduced with a dark picture. PICTURE Adjustments Item PICTURE BRIGHTNESS COLOR TINT (NTSC only) SHARPNESS Effect Adjustments Less More Darker Brighter Reddish Greenish Adjusts the proper picture contrast.
30 PRESENT TIME OF DA Y Set SET UP TIMER The timer can switch the Plasma Display ON or OFF . Before attempting T imer Set, confirm the PRESENT TIME OF DA Y and adjust if necessary . Then set POWER ON TIME/POWER OFF TIME. Display the SET UP TIMER screen T o set up PRESENT TIME, follow the procedure described below .
31 SET UP TIMER PRESENT TIME OF DA Y POWER ON FUNCTION 0:52 OFF POWER ON TIME POWER OFF FUNCTION POWER OFF TIME 0:00 0:00 OFF TIMER Set Press to display the POWER ON SET UP / POWER OFF SET UP screen. Press to select POWER ON TIME/ POWER OFF TIME. 1 Press to select HOURS ADJUSTMENT/ MINUTES ADJUSTMENT .
32 SCREENSA VER (For preventing after-images) 2 3 1 4 SET UP SIGNAL SCREENSA VER COMPONENT/RGB-IN SELECT RGB OSD LANGUAGE ENGLISH ( US ) SET UP TIMER 0:00 0:00 SCREENSA VER FUNCTION MODE WHITE BAR SCROLL INTERV AL SHOW DURA TION SIDE BAR ADJUST BRIGHT SA VER DURA TION Press to display the SETUP menu screen.
33 2 Press to select the SIDE BAR ADJUST . Press to select OFF , DARK, MID, BRIGHT . OFF DARK MID BRIGHT R Press to exit from SCREENSA VER. 3 1 Do not display a picture in 4:3 mode for an extended period, as this can cause an after-image to remain on the side bars on either side of the display field.
34 SET UP for Input Signals COMPONENT/RGB IN SELECT Select to match the signals from the source connected to the COMPONENT/RGB input terminals. Y, P B , P R signals “ COMPONENT ” R, G, B, HD, VD signals “ RGB ” INPUT SURROUND VOL NR PICTURE SOUND SET UP ASPECT PICTURE POS.
35 SET UP for Input Signals COLOR SYSTEM / AUT O Select SIGNAL from the “ SET UP ” menu during VIDEO (S VIDEO) input signal mode. ( “ SIGNAL [VIDEO] ” menu is displayed.) Press to select the “ COLOR SYSTEM ” or “ AUTO ” . Press to select each function.
36 Select SIGNAL from the “ SET UP ” menu during RGB or PC input signal mode. Press to adjust. SIGNAL [ PC ] SYNC H - FREQ. kHz V - FREQ. Hz H & V 31.5 60.0 SYNC SYNC H & V SYNC ON VIDEO SYNC ON G Setting RGB sync signal Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT).
37 Check The plasma display panel is manufactured using an extremely high level of precision technology , however , sometimes some parts of the screen may be missing picture elements or have luminous spots.
38 PDM-1 120 V AC, 50/60 Hz 5.5 A 2.4 W 0.9 W Drive method AC type 50-inch, 16:9 aspect ratio 3000:1 1,106 mm (W) × 622 mm (H) × 1,269 mm (diagonal) No.
39 Accessories Supplied Remote Control T ransmitter Batteries Ferrite core Fixing bands Speaker Wire Optional Supplied Speakers(main speaker) Speakers(center speaker) Pedestal W all-mounting unit Dime.
Y AMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE A VE., BUENA P ARK, CALIF . 90620, U.S.A. Y AMAHA CANADA MUSIC L TD. 135 MILNER AVE., SCARBOROUGH, ONT ARIO M1S 3R1, CANADA Y AMAHA ELECTRONIK EUROP A G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F .
Een belangrijk punt na aankoop van elk apparaat Yamaha PDM-1 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Yamaha PDM-1 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Yamaha PDM-1 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Yamaha PDM-1 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Yamaha PDM-1 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Yamaha PDM-1 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Yamaha PDM-1 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Yamaha PDM-1 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
