Gebruiksaanwijzing /service van het product ZWF 91483 WR LINDO 300 van de fabrikant Zanussi
Ga naar pagina of 20
EN ZWF 91483WH ZWF 91483WR User Manual Washing Machine.
Contents Safety information 2 Safety instructions 3 Product description 4 Control panel 5 Programme Chart 6 Consumption values 7 Options 8 Settings 9 Before first use 9 Daily use 9 Hints and tips 12 Care and cleaning 13 Troubleshooting 15 Technical Data 17 Subject to change without notice.
• The ventilation openings in the base (if applicable) must not be obstructed by a carpet. • The appliance is to be connected to the water mains using the new supplied hose-sets.
• The first time you use the appliance, make sure that there is no leakage. Use WARNING! Risk of injury, electrical shock, fire, burns or damage to the appliance. • Use this appliance in a household only. • Obey the safety instructions on the detergent packaging.
Control panel Control panel description Quick 1400 90° 60° 40° 30° 1200 800 Intensive Easy Iron Rinse Only Drain & Spin Cottons Synthetics Delicates Wool/Handwash Duvets Mix 20° Cotton ECO P .
Programme Chart Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) 30' @ 30° 30 °C 3 kg 800 rpm A short cycle for synthetics and delicate items with light soil level or for items to freshen up.
Pro- gramme Quick 1) In- ten- sive Easy Iron Rinse Only Drain & Spin Delicates ■ ■ ■ ■ ■ ■ ■ ■ ■ Wool/Hand- wash ■ ■ ■ ■ ■ ■ Duvets ■ ■ ■ ■ ■ ■ Mix 20° ■ ■ ■ ■ ■ ■ ■ 1) When you set this option, we recommend that you decrease the quantity of the laundry.
Off Mode (W) Left On Mode (W) 0,48 0,48 The information given in the chart above are in compliance with the EU Commission regulation 1015/2010 implementing directive 2009/125/EC. Options Temperature With this option you can change the default temperature.
The display shows the number of hours and the indicator above the button is on. Extra Rinse With this option you can add some rinses to a washing programme. Use this option for persons allergic to detergents and in areas where the water is soft. The related indicator comes on.
Make sure not to put too much laundry in the drum. Refer to max. loads indicated in "Programme chart". 4. Close the door. CAUTION! Make sure that no laundry stays between the seal and the door. There is a risk of water leakage or damage to the laundry.
A tune sounds when the appliance is activated. The appliance performs a start up animation. The animation quickly shows each washing programme and the default temperature and spin settings. The display shows the word On. Setting a programme 1. Touch the programme button and set the programme: • The indicator of the button flashes.
CAUTION! If the temperature and level of the water in the drum are too high, you cannot open the door. To open the door during the first minutes of the cycle (or when the operates) : 1. Touch the button to pause the appliance. 2. Wait until the indicator goes off.
• Remove hard stains. • Wash with a special detergent heavy soil stains. • Be careful with the curtains. Remove the hooks or put the curtains in a washing bag or pillowcase. • Do not wash in the appliance laundry without hems or with cuts. Use a washing bag to wash small and/or delicate items (e.
Maintenance wash With the low temperature programmes it is possible that some detergent stays in the drum. Make regularly a maintenance wash. To do this: • Remove the laundry from the drum. • Set the cotton programme with the highest temperature with a small quantity of detergent.
WARNING! Make sure that the temperature is more than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. Troubleshooting WARNING! Refer to Safety chapters. Introduction The start of the appliance does not occur or it stops during operation.
Problem Possible solution The appliance does not drain the water. • Make sure that the sink spigot is not clogged. • Make sure that the drain hose has no kinks or bends. • Make sure that the connection of the drain hose is correct. • Set the drain option if you set a programme without drain phase.
If the display shows other alarm codes. Deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. Service We recommend the use of original spare parts. When contacting the Authorised Service Centre, make sure that these data are available.
18 www.zanussi.com.
www.zanussi.com 19.
www .zanussi.com/shop 192974980-B-242014.
Een belangrijk punt na aankoop van elk apparaat Zanussi ZWF 91483 WR LINDO 300 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Zanussi ZWF 91483 WR LINDO 300 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Zanussi ZWF 91483 WR LINDO 300 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Zanussi ZWF 91483 WR LINDO 300 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Zanussi ZWF 91483 WR LINDO 300 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Zanussi ZWF 91483 WR LINDO 300 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Zanussi ZWF 91483 WR LINDO 300 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Zanussi ZWF 91483 WR LINDO 300 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
