Gebruiksaanwijzing /service van het product SC121H van de fabrikant Billy Goat
Ga naar pagina of 41
1 370406 F103104A MODEL SC121H OPERA TING AND SAFETY INSTRUCTIONS.
2 370406 F103104A.
3 370406 F103104A 1. USE OF THE MANUAL......................................................................... p age 4 2. NOTICES ON THE MACHINE............................................................... p age 5 3. TECHNICAL DA T A...............
4 370406 F103104A OPERA TING AND SAFETY INSTRUCTIONS SOD CUTTER MODEL SC121H FOREWORD This machine may only be utilized for the purpose for which it was designed, i.e. to cut 30cm-wide strips of turf. Any other use other than that stated, not covered or deducible from this Ma-nual and the enclosed Engine Manual is “PROHIBITED”.
5 370406 F103104A 2. NOTICES ON THE MACHINE W ARNING The Engine Exhaust from this product contains chemicals known to the S tate of California to cause cancer , birth defects or other reproductive harm. The symbols affixed to the machine serve to warn of danger during its use and maintenance.
6 370406 F103104A 370300 - Label Instructions, Qty . 1 370405 - Label Controls Instuction, Qty . 1.
7 370406 F103104A 3. TECHNICAL DA T A FOR THE SOD CUTTER SC121H ENGINE : Gasoline, HONDA GX 160 K1 ENGINE CAP ACITY : 5.5 Hp (4.0 kW) CUTTING WIDTH : 12” (30 cm) CUTTING HEIGHT : adjustable up to 35.
8 370406 F103104A 4. LIFTING AND TRANSPORT A TION All material is carefully checked by the manufacturer before shipping. The turf cutter is delivered in a cardboard box with the handlebars and end part of the cutting height adjustment lever disassembled.
9 370406 F103104A 5. MAIN P ARTS OF THE MACHINE The machine consists of the following main parts: A - BLADE CLUTCH CONTROL LEVER B - ACCELERA T OR CONTROL LEVER C - FORW ARD CLUTCH CONTROL LEVER D - C.
10 370406 F103104A 6. CONTROL AND ADJUSTMENTS A) BLADE CLUTCH CONTROL LEVER This is used to engage and disengage the blade movement. Lowering the lever engages the clutch and releasing it disengages the clutch.
11 370406 F103104A I) ON SWITCH T wo-position switch: (1) for starting the engine (0) for switching off the engine L) FORW ARD-NEUTRAL GEAR SELECTOR LEVER This lever selects the gear forward (1st, 2nd) or neutral. W ARNING Select the required gear only after disengaging the forward clutch by releasing the relative lever (Fig.
12 370406 F103104A 8. SAFETY INFORMA TION Before using the turf cutter it is essential that the operator has understood the warnings, do’s and don’t s and precautionary measures given in this manu.
13 370406 F103104A T ake care when handling fuel. Fuel is highly flammable and it s vapours explosive : - Only use an approved container - T ake care not to remove fuel caps or top up the t ank with the engine running. - Allow the engine to cool before proceeding with fuel-filling operations.
14 370406 F103104A W ARNING During operation the lawn and turf are cut into strips. Should the cutter's wheels skid during use it is advisable to adjust the cutting height using the special lever (Fig. 3, ref.A). If this operation does not prevent this occurence check the state of the terrain.
15 370406 F103104A 9. TRANSPORT A TION OF THE MACHINE LOADING AND UNLOADING FROM A VEHICLE For transportation it is preferable to use a vehicle with an open bed.
16 370406 F103104A 10. DESCRIPTION OF THE SAFETY AND GUARD SYSTEMS W ARNING The safety devices must never be tampered with. It is necessary to understand how they work and safeguard their efficiency and correct operation. In the instance of doubt, problems or malfunction contact your dealer .
17 370406 F103104A 12. S T ARTING AND DRIVING THE TURF CUTTER The machine can be switched on once all the aforementioned preliminary operations have been carried out. Place the feed cock in the OPEN position (direction shown by the arrow , Fig. 4). Bring the choke to the CLOSED position for a cold start (direction shown by the arrow , Fig.
18 370406 F103104A After switching on the engine following the instructions given in the previous paragraph: 1. Move the gear lever ( fig. 2) to the 1st speed position. W ARNING If the gear engages with difficulty , partially engage the clutch for an inst ant before trying to engage the gear again.
19 370406 F103104A 13. CUTTING TIPS 1. Before commencing cutting operations, read the safety instructions given in the previous sections. 2. At first the setting of a relatively high cutting height is recommended (using the relative lever in figure 2, ref.
20 370406 F103104A B2) FOR WARD CONTROL CABLE Make sure that there is no play between the upper end of the cable and the adjustment screw . If there is, or if the cable has stretched, restore to ideal position using the relative adjustment screw ( Fig.
21 370406 F103104A C2)FORW ARD CONTROL BEL T Remove the blade control belt following the instructions given in the preceding p aragraph. - Remove the blade (Fig.1 Ref. G) following the instructions provided in the section entitled “Blade removal and replacement”.
22 370406 F103104A Figure 6 Figure 7.
23 370406 F103104A Figure 8 Figure 9.
24 370406 F103104A Figure 10 E) CHECKING AND REPLACING THE BLADE Always check the state of the blade before commencing work. Do not forget to switch the engine off! - During work operations if the blade (Fig. 10, ref. A ) strikes stones or stumps stop straightaway and make sure that it has not become bent or broken.
25 370406 F103104A 15. MAINTENACE AND ST ORAGE All operations on the machine must be carried out exclusively by authorized personnel. Always switch off the engine when checking, adjusting or servicing the machine. Allow the machine to cool down before inspection.
26 370406 F103104A Figure 1 1 16. CLEANING THE MACHINE Proceed in the following order: - Switch off the engine and disconnect the sp ark plug wire; - Clean the engine and the outside of the machine with a cloth soaked in a little oil. - Clean all p arts of the machine, particularly the starting unit, air filter , exhaust and carburetor .
27 370406 F103104A 18. DECOMMISSIONING AND SCRAPPING After the working life of the turf cutter the user must have it dismantled and its component s removed as per EEC directives or in accordance with .
28 370406 F103104A 21. TROUBLESHOOTING The following table illustrates some problems which may arise during operation. ENGINE FAULT CAUSE MEASURES T O BE T A KEN Engi ne s l uggish at switc h on 1. accel erator not in start -up po s itio n 2. Choke not cl os ed 3.
29 370406 F103104A NOTES _________________________________________________________________________ _________________________________________________________________________ ___________________________.
30 370406 F103104A.
31 370406 F103104A 1/6 PART LIST LEVER CONTROL ( righthand ) 1 001 370252 GRIP 2 002 370257 LEVER TIGHTENER (LEFTHAND) 1 003 370253 SCREW M6X55 UNI 5931 2 004 370178 NUT LOCK M6 H6 2 005 370107 LEVER .
32 370406 F103104A.
33 370406 F103104A 2/6 PART LIST NUT LOCK M6 H6 1 005 370107 LEVER 1 016 370243 SCREWCAP M6X45 P.F. 1 017 370282 WASHER FLAT M8 2 021 370110 FORK 03216055 2 023 370259 CLIP FORK 1 024 370260 NUT M10 1 028 370146 SCREWCAP M10X50 P.
34 370406 F103104A.
35 370406 F103104A 3/6 PART LIST NUT LOCK M6 H6 1 005 370107 WASHER FLAT M6 1 007 370112 NUT M8 H5 4 025 370136 WASHER GROWER U 1751 8 4 026 370407 A RM CONTROL BLADE (RIGHT) 1 027 370501 KEY 8X7X25 1.
36 370406 F103104A.
37 370406 F103104A 4/6 PART LIST SCREWCAP M8X16 6 001 370126 WASHER FLAT M8 6 002 370110 REAR WHEEL 3.00-4 TRACTOR 2 003 370194 TIBE INNER REAR WHEEL 2 004 370277 TIRE 3.
38 370406 F103104A.
39 370406 F103104A 5/6 PART LIST PLASTIC KNOB Ø 12 1 018 370182 CAP PLASTIC 1 019 370162 WASHER FIBER 1 020 370163 SCREW ALLEN M 8 X 16 4 021 370159 LEVER ENGAGE-DISENGAGE 1 022 370226 SPRING GEAR FO.
40 370406 F103104A.
41 370406 F103104A 6/6 PART LIST SHIM ENGINE 20X6 2 001 370193 WASHER FLAT M8 8 002 370110 SUPPORT ENGINE 1 003 370234 SCREW TTQST 8X40 4 004 370172 WASHER TOROIDAL M24 4 005 370175 NUT LOCK M8 2 006 370125 SCREWCAP M8X16 2 007 370126 GUIDE BELT No.
Een belangrijk punt na aankoop van elk apparaat Billy Goat SC121H (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Billy Goat SC121H heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Billy Goat SC121H vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Billy Goat SC121H leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Billy Goat SC121H krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Billy Goat SC121H bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Billy Goat SC121H kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Billy Goat SC121H . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
