Gebruiksaanwijzing /service van het product port unmanaged fast ethernet switch van de fabrikant ZyXEL Communications
Ga naar pagina of 24
www .zyxel.com www .zyxel.com ES1 100 Series 8/16/24 Port Unmanaged Fast Ethernet Switch With PoE/GbE Option IMPORT ANT! READ CAREFULL Y BEFORE USE. Copyright © 2012 ZyXEL Communications Corporation V ersion 1.
ES1100 Series User’s Gui de 2 IMPORT ANT! READ CAREFULL Y BEFORE USE. KEEP THIS GUIDE FOR FUTURE REFERENCE. Graphics in this book ma y differ slightly from the product due to difference s in oper ating systems, operating system versions, or if y ou installed updated firmware/software fo r your device.
Table of Contents ES1100 Series User’s Guide 3 Table of Contents Table of Contents ................................................. ..................................................... ........... ................ 3 Chapter 1 Getting to Know Y our Switch.
Table of Contents ES1100 Series User’s Gui de 4.
ES1100 Series User’s Guide 5 C HAPTER 1 Getting to Know Your Switch 1.1 Overview This User’s Guide covers the following models: ES1100-8P , ES1100-16, ES110 0-16P , ES1100-24, ES1100-24E, and ES1100-24G. The Switch can be used to build high-performance switched workgroup networks.
Chapter 1 Getting to Know Your Switch ES1100 Series User’s Gui de 6 Figure 1 Front P anel The Switch has a built -in algorithm that automatically assigns priority to received packets. 1.2 Features The following are the essential features of the Switch.
Chapter 1 Getting to Know Your Switch ES1100 Series User’s Guide 7 • Auto-sensing crossover for all RJ-45 ports. • Supports N-W ay protocol for speed (10 /100 /1000 Mbps) and duplex mode (Half/Full) auto- detection. • Supports store-and-forward switching.
Chapter 1 Getting to Know Your Switch ES1100 Series User’s Gui de 8 The following figure depicts a typical segment brid ge application of the Switch in an enterprise environment. The two networks ( RD and Sales ), the standalone server and the computers can all communicate with each other and share all network resources.
ES1100 Series User’s Guide 9 C HAPTER 2 Hardware Description and Connection 2.1 Rear Panel The three-pronged powe r receptacle is located on the rear pan el of the Switch.
Chapter 2 Hardware Descripti on and Connection ES1100 Series User’s Gui de 10 2.1.1 Rear Panel Power Connection Connect one end of the supplied power cord to the power receptacle on the back of the Switch and the other end to the appropriate power source.
Chapter 2 Hardware Description an d Connection ES1100 Series User’s Guide 11 2.2.3 Front Panel Connections Y o u can use unshielded twisted pair (UTP) or shield ed twisted-pair (STP ) Ethernet cables for RJ-45 ports. The following table describes the types of network cable used for the differ ent connection speeds.
Chapter 2 Hardware Descripti on and Connection ES1100 Series User’s Gui de 12 Figure 7 LEDs for ES1100-8P/16 P The follow ing table descr ibes the LEDs .
Chapter 2 Hardware Description an d Connection ES1100 Series User’s Guide 13 2.3 Hardware Inst allation See the following table for a comparison of the hardware installation methods of each ES1100 model: T able 6 ES1100 Se ries Installation Comparison Table Note: Ask an authorized technician to att ach the Switch to the r ack/w all.
Chapter 2 Hardware Descripti on and Connection ES1100 Series User’s Gui de 14 See T able 7 on page 14 for how far apart to place the screws. 1 Screw the two screws provided with your S witch in to the wall (see the figure in step 2). Use screws with 6 mm ~ 8 mm (0.
Chapter 2 Hardware Description an d Connection ES1100 Series User’s Guide 15 • Eight M3 flat head screws and a #2 Philips screwdriver . • Four M5 flat head screws and a #2 Philips screwdriver . Failure to use the proper sc rews may damage the unit.
Chapter 2 Hardware Descripti on and Connection ES1100 Series User’s Gui de 16 2.3.3 Mounting the Switch on a Rack 1 Po sition a mounting bracket (that is already attach ed to the Switch) on one side of the r ack, lining up the two screw holes on the brack et with the screw holes on the side of the r ack.
ES1100 Series User’s Guide 17 C HAPTER 3 Troubleshooting This section describes common problems you may encounter with the S witch and possible solutions. T roubleshoot the Switch using the LEDs to detect problems. The PWR LED on the front panel does not light up.
Chapter 3 Troubl eshooting ES1100 Series User’s Gui de 18 3.1 Improper Network Cabling and T opology Improper network cabling or topology setup is a common cause of poor network performance or even network failure.
ES1100 Series User’s Guide 19 A PPENDIX A Legal Information Copyright Copyright © 2012 by Z yXEL Communications Corporation. The contents of this publication may not be repr oduced in any part or a.
Appendix A Legal Information ES1100 Series User’s Gui de 20 T aiwanese BSMI (Bureau of St andards, Metrology and Inspection) A W arning: 警告使用者 這是甲類的資訊產品，在居住的環.
Appendix A Legal Info rmation ES1100 Series User’s Guide 21 • Do NOT stor e things on the device. • Do NOT i nstall, use, or service this device during a thunderst orm. There is a remote risk of electric shock from lightning. • Do not obstruc t t he device ventillation slots as insufficient airflow may harm your device.
Appendix A Legal Information ES1100 Series User’s Gui de 22.
Index ES1100 Series User’s Guide 23 Index A Applications 7 Segment Bridge 7 auto-negotiating ports 10 C Cabling Length 18 certifications 19 notices 20 viewing 20 copyright 19 D Data path loop 18 dis.
Index ES1100 Series User’s Gui de 24 product registration 20 R rack mo unting 14 Re ar P an e l 9 Rea r Pan el Po we r Co n ne c ti o n 10 registration product 20 S Standalone W orkgroup 7 T Tr o u .
Een belangrijk punt na aankoop van elk apparaat ZyXEL Communications port unmanaged fast ethernet switch (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen ZyXEL Communications port unmanaged fast ethernet switch heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens ZyXEL Communications port unmanaged fast ethernet switch vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding ZyXEL Communications port unmanaged fast ethernet switch leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over ZyXEL Communications port unmanaged fast ethernet switch krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van ZyXEL Communications port unmanaged fast ethernet switch bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de ZyXEL Communications port unmanaged fast ethernet switch kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met ZyXEL Communications port unmanaged fast ethernet switch . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
