
Thank you for choosing our product. We hope you enjoy using the device.
Symbols in these Instructions for Use Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the machine:
Children and Frail Individuals In order to ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.
Safety instructions
Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.
1 button (select / turn off light intensity) 2 – button (reduce volume / previous music fi le) 3 Indicator light (rechargeable battery) 4 button (play / pause) 5 Indicator light (bluetooth) 6 + button (Increase volume / next music fi le) 7 / button (on / off / accept or end incoming call / pairing) 8 Carrying handle 9 Rubberized cover 10 Built-in microphone 11 Lamp shade 12 Reset button 13 USB port (type A) 14 Micro B USB charging socket 15 Memory card slot 16 AUX jack
Supplied Parts (not shown) 1 Charger cable (type A USB to Micro B USB) 1 Audio cable (3.5 mm jack plug)

Before First Use Charge the battery before fi rst use. See details in chapter “Charge Integrated Battery”.
Sound Settings If necessary, change the EQ setting in your playback unit to create the best sound.
Lighting During operation, you can illuminate the lower part of the device. To select the intensity of the light or to turn it off, press the button repeatedly.
The player is powered by the integrated rechargeable lithium battery. Charge the battery as follows:
Reset the Device (Resetting) Any malfunction during operation can be resolved by pressing the reset button. Press the button (12) with a wire or similar to reset the electronics.
The USB port can be also used to charge mobile devices (Smartphone or Tablet PC). Follow the operating instructions of your mobile device.
Regarding the charging status, please refer to the mobile device.
General Operation
You have four options to play back your own music fi les: via cable, wireless via Bluetooth, via USB port, or via card slot.
By Cable 1. Switch on the device. 2. Flip the rubberized cover (9) open. 3. Connect the 3.5 mm stereo cable to an external audio source. If required, use a suitable adapter (not included). 4. Insert the other end of the cable into the AUX-IN jack on the unit. The device switches automatically to the AUX-IN mode. 5. Start the playback of your audio source. Listen to the sound playback via the speaker. 6. For the further procedure, please refer to the user manual of the external audio source.
Volume Press and hold the – button or the + button in order to adjust the volume as desired.

Keep the rubberized cover closed when not in use.
Cordless via Bluetooth Bluetooth involves a technology for wireless radio connection of devices over a short distance. Devices with Bluetooth standard are transmitting between 2.402 and 2.480 GHz in the ISM band (Industrial, Scientific and Medical). Interference can be caused for example by WLAN-networks, DAB radios, cordless phones, or microwave ovens which work on the same frequency band.
button to receive the call. The sound will be played back through the radio. Speak towards the microphone or transfer the call to your mobile phone. When doing this, please refer to the fade-in on the display of your mobile phone. After you have terminated the phone call, the playback will resume. • Automatic connection If supported by your player (e.g. mobile phone), the devices will be connected automatically. The prerequi- site for this is:
This device offers you the possibility to use a Bluetooth-en- abled device. The functional radius is limited to approx. 15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced Audio Distribution Profile) and has a music-player function, then you can also wirelessly transfer music to the device. The A2DP profile involves a multi-vendor Bluetooth profile. By streaming, stereo-audio signals are wirelessly transferred between the playing device (source) and the receiving device. To be able to remotely control the source, the play- back device must support the AVRCP profile (Audio Video Remote Control Profile.
-- The devices were already connected with each other. -- Bluetooth is activated in your player.
Playing Music via USB This device has been developed in line with the latest tech- nical advances in the USB field. The wide range of different USB storage devices of all types which are currently on the market, unfortunately do not allow us to guarantee full com- patibility with all USB storage devices. For this reason, in rare cases there may be problems in playing back files from USB storage devices. This is not a malfunction of the device. Only use commercially available USB sticks.
Due to the different device manufacturers, models, and software versions, a full functionality cannot be guaranteed.
Logging on Devices (Pairing) Before you listen to music via the unit, you must pair the devices.
1. Ensure, that the Bluetooth function is activated in your player (e. g. mobile phone). For this, refer to the operation manual of your player. 2. Switch on the device. The device will beep several times and the BT indicator lamp (5) will flash blue. This indicates that the unit is in pairing mode. 3. Choose the Bluetooth menu in your player and register the device in your player. For this, refer to the operation manual of your player. The device “AEG BSS 4841” will show in your player as a selection.
For operation, please refer to the section “Description of the Control Buttons”. Keep the rubberized cover closed when not in use.
Memory Card Slot 1. Switch on the device. 2. Flip the rubberized cover (9) open. 3. Insert the memory card into the designated opening until it engages with a "click". The contacts must face down. The device switches automatically to the SD mode. Playback will automatically start after a few seconds.

For operation, please refer to the section “Description of the Control Buttons”. Keep the rubberized cover closed when not in use.
No audio signal during Bluetooth connection.
Speaker is switched off.
Switch the speaker on.
Speaker is not paired to the audio source.
Check whether the connection exists. If necessary, pair the speaker to the audio source again.
Volume too low. Press and hold the + button on the speaker to increase the volume.
Increase the volume on the audio source.
The device is equipped with multi functional buttons. For different functions press the respective button briefly or press and hold.
Cannot con- nect speaker.
Pairing does not work.
Check, whether the audio source supports the A2DP protocol.
Audio source is turned off.
Turn the audio source on.
Bluetooth is turned off on the audio source.
Turn the Bluetooth function on in the audio source.
Bluetooth version is not supported.
Use another playback unit.
Model: BSS 4841 Audio connection: 3,5 mm stereo jack plug Protection rating: IPX 4 Net weight: approx. 0.6 kg Power supply: DC 5 V Battery: 3,7 V 2200 mAh lithium-Ions
Charging time: approx. 5 hours Operating time: approx. 20 hours
Bluetooth Bluetooth support: V3.0 + EDR Range: approx. 15 meters Transmitting frequency: 2,402 − 2,480 GHz Protocols: A2DP / AVRCP
The right to make technical and design modifications in the course of continuous product development remains reserved.
The unit cannot be operated.
The unit is blocked and “hangs”.
Press the button (12) with a wire or similar to reset the electronics.
This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.
Cannot switch the speaker on.
Battery empty. Charge the battery ( Page 31)
Problem Cause Solution · Problem Cause Solution

Meaning of the “Dustbin” Symbol
Protect our environment: do not dispose of electrical equipment in the domestic waste.
Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on the environment and human health.
This will contribute to the recycling and other forms of re-utili- sation of electrical and electronic equipment.
Information concerning where the equipment can be dis- posed of can be obtained from your local authority.
The unit includes a rechargeable battery. Used batteries do not belong in household waste.
The battery must be removed before the product is disposed of. Contact qualified specialists to do so.
Information on where the battery must be disposed of can be found via your local authorities or municipalities.
Disposal of batteries
Veelvoorkomende problemen, mogelijke oorzaken en oplossingen.
| Probleem | Mogelijke oorzaak | Oplossing | |
|---|---|---|---|
| No audio signal during Bluetooth connection. | Speaker is switched off. | Switch the speaker on. | p.4 |
| No audio signal during Bluetooth connection. | Speaker is not paired to the audio source. | Check whether the connection exists. If necessary, pair the speaker to the audio source again. | p.4 |
| No audio signal during Bluetooth connection. | Volume too low. | Press and hold the + button on the speaker to increase the volume. | p.4 |
| No audio signal during Bluetooth connection. | Increase the volume on the audio source. | p.4 | |
| Cannot con- nect speaker. | Pairing does not work. | Check, whether the audio source supports the A2DP protocol. | p.4 |
| Cannot con- nect speaker. | Audio source is turned off. | Turn the audio source on. | p.4 |
| Cannot con- nect speaker. | Bluetooth is turned off on the audio source. | Turn the Bluetooth function on in the audio source. | p.4 |
| Cannot con- nect speaker. | Bluetooth version is not supported. | Use another playback unit. | p.4 |
| The unit cannot be operated. | The unit is blocked and “hangs”. | Press the button (12) with a wire or similar to reset the electronics. | p.4 |
| Cannot switch the speaker on. | Battery empty. | Charge the battery ( Page 31) | p.4 |
Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.
Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.