

N
NL
F
K
G

D
A
Components
A. Soleplate B. Maximum water level
indicator C. Filling aperture with cover D. Spray nozzle E. Spray button F. Steam jet button G. Steam selector/Self-
cleaning H. Power indicator light I. Mains cable J. Safety auto-off light K. Temperature selector L. Water tank M. Cable wrap facility N. Rubber-napped heel

Ironing chart
Fabric Temperature setting Ironing recommendation
Acrylic Dry iron on wrong side.
Acetate Dry iron on wrong side while still damp or use spray to dampen.
Nylon & Polyester Iron on wrong side while still damp or use spray to dampen.
Rayon Iron on wrong side of fabric.
Viscose Mainly dry iron. Steam can be used under manufacturer’s instructions.
Silk Iron on wrong side. Use an ironing cloth to prevent shine marks.
Cotton blends Check label and follow manufacturer’s instructions. Use setting fo the fi bre requiring lowest setting.
Wool & wool blends Steam iron on wrong side or use ironing cloth.
Cotton Dry iron while still damp or use spray to dampen. Use steam medium to high.
Corduroy Steam iron on wrong side or use ironing cloth.
Iron on wrong side or use ironing cloth to prevent shine marks, especially with dark colours. Dry iron while still damp or use spray to dampen. Use steam medium to high.
Denim to “max” Use maximum steam.
Varied ironing speed and fabric dampness might cause optimal setting to diff er from that recommended in the table!
Linen to “max”




GR
NL
F



8 min · 30 sec · 30 sec




Disposal Packaging materials The packaging materials are environ- mentally friendly and can be recycled. The plastic components are identifi ed by markings, e.g. >PEPS
which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city offi ce, your household waste disposal service or the shop where you purchased the product.
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health,
Old appliance

Problem Possible cause Solution
Soleplate is not heating even though iron is turned on.
Connection problem Check main power supply cable, plug and outlet.
Temperature control is in MIN position. Select adequate temperature.
Iron does not produce steam. Not enough water in tank. Fill water tank (see “Getting started”, no 2).
Steam control is selected in non-steam position. Set steam control between positions of minimum steam and maximum steam (see “Ironing chart”).
Increase temperature to at least .
Selected temperature is lower than that specified to use with steam.
Spray function does not work. Not enough water in tank. Fill water tank (see “Getting started”, no 2).
Steam jet and vertical steam jet function does not work.
Steam jet function was used very frequently within a short period.
Put iron on horizontal position and wait before using steam jet function.
Iron is not hot enough. Adjust the proper temperature to steam ironing (up to ). Put iron in vertical position and wait until temperature indicator light turns off .

Electrolux Hausgeräte Vertriebs GmbH Fürther Strasse 246 D-90429 Nürnberg Germany
Share more of our thinking at www.electrolux.com
Veelvoorkomende problemen, mogelijke oorzaken en oplossingen.
| Probleem | Mogelijke oorzaak | Oplossing | |
|---|---|---|---|
| Soleplate is not heating even though iron is turned on. | Connection problem | Check main power supply cable, plug and outlet. | p.5 |
| Soleplate is not heating even though iron is turned on. | Temperature control is in MIN position. | Select adequate temperature. | p.5 |
| Iron does not produce steam. | Not enough water in tank. | Fill water tank (see “Getting started”, no 2). | p.5 |
| Iron does not produce steam. | Steam control is selected in non-steam position. | Set steam control between positions of minimum steam and maximum steam (see “Ironing chart”). | p.5 |
| Iron does not produce steam. | Selected temperature is lower than that specified to use with steam. | Increase temperature to at least . | p.5 |
| Spray function does not work. | Not enough water in tank. | Fill water tank (see “Getting started”, no 2). | p.5 |
| Steam jet and vertical steam jet function does not work. | Steam jet function was used very frequently within a short period. | Put iron on horizontal position and wait before using steam jet function. | p.5 |
| Steam jet and vertical steam jet function does not work. | Iron is not hot enough. | Adjust the proper temperature to steam ironing (up to ). Put iron in vertical position and wait until temperature indicator light turns of .f | p.5 |
Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.
Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.