NL
AEG logo
Officiële handleiding

AEG DB8050-U

20 pagina's·3.6 MB·Stoomstrijkijzer·PDF·ENDEFRITJA
AEG DB8050-U
Inhoudsopgave 16 secties EL · NL · H/I · B C · … TonenVerbergen
Page 1 of the AEG DB8050-U user manual — D
Pagina 1 · klik om te vergroten
Pagina 1
AEG DB8050-U — EL diagram (page 1)
Afb. 1

K

D

EL

NL

F

H/I

O

F

E

B

G

M

B C

N

D

A

Components

A. Soleplate B. Maximum water level

indicator C. Filling aperture with cover D. Spray nozzle E. Spray button F. Steam jet button G. Steam knob H. Power indicator light I. Safety auto-off light K Mains cable L. Temperature selector M. Water tank N. Cable wrap facility O. Rubber-napped heel

Page 2 of the AEG DB8050-U user manual — G
Pagina 2 · klik om te vergroten
Pagina 2

Safety advice

  • Read the following instruction carefully before using machine for the fi rst time.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Children should be supervised to ensure that they do not play with the appliance.
  • The appliance may only be connected to a power supply whose voltage and frequency comply with the specifi cations on the rating plate!
  • The iron is not to be used if it has been dropped, if there are visible signs of damage on the iron or its cord or if it is leaking.
  • The appliance must only be connected to an earthed socket.
  • If the appliance or the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
  • similarly qualifi ed person, in order to avoid hazard.
  • The iron must be used and rested on a stable surface. When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
  • Never leave the appliance unattended while connected to the supply mains.
  • The appliance must be switched off and the mains plug withdrawn each time after use, before cleaning and maintenance.
  • The plug must be removed from the socket outlet before the water reservoir is fi lled with water.
  • The mains cable must not come into contact with any hot parts of the appliance.
  • Do not immerse the appliance in water or any other liquid.
  • Do not exceed the maximum fi lling volume as indicated on the appliances.
  • If there are limitations please defi ne water quality / type of water that can be used with appliance.
  • This appliance is intended for domestic use only. The manufacturer cannot accept any liability for possible damage caused by improper or incorrect use.

G

Ironing chart

Fabric Temperature setting Ironing recommendation

Acrylic Dry iron on wrong side.

Acetate Dry iron on wrong side while still damp or use spray to dampen.

Nylon & Polyester Iron on wrong side while still damp or use spray to dampen.

Rayon Iron on wrong side of fabric.

Viscose Mainly dry iron. Steam can be used under manufacturer’s instructions.

Silk Iron on wrong side. Use an ironing cloth to prevent shine marks.

Cotton blends Check label and follow manufacturer’s instructions. Use setting fo the fi bre requiring lowest setting.

Wool & wool blends Steam iron on wrong side or use ironing cloth.

Cotton Dry iron while still damp or use spray to dampen. Use steam medium to high.

Corduroy Steam iron on wrong side or use ironing cloth.

Iron on wrong side or use ironing cloth to prevent shine marks, especially with dark colours. Dry iron while still damp or use spray to dampen. Use steam medium to high.

Denim to “max” Use maximum steam.

Varied ironing speed and fabric dampness might cause optimal setting to diff er from that recommended in the table!

Linen to “max”

Page 3 of the AEG DB8050-U user manual — B A
Pagina 3 · klik om te vergroten
Pagina 3

Getting started

AEG DB8050-U — Getting started diagram (page 3)
Afb. 2 · Getting started
AEG DB8050-U — Getting started diagram (page 3)
Afb. 3 · Getting started
AEG DB8050-U — Getting started diagram (page 3)
Afb. 4 · Getting started

D

EL

NL

F

1. Before fi rst use. Remove all adhesive remains and gently rub with a dampened cloth. Rinse water tank to remove foreign particles. When turned on for the fi rst time, temporary vapours/odours may occur.
2. Filling steam iron with water. Make sure plug is removed from power outlet. Turn steam selector to Dry setting and open fi lling aperture cover. Using beaker provided, pour water up to maximum level. Close cover.
3. Plug power cable into a power outlet . Power indicator light turns on. Set temperature by turning temperature selector to adequate choice. When the light turns off , iron is ready to be used.
AEG DB8050-U — D diagram (page 3)
Afb. 5
AEG DB8050-U — D diagram (page 3)
Afb. 6

auto clean

B A

4. Using the steam function (for models without auto steam). Turn the steam knob to select the desired steam output for each garment, if selecting the off position, it indicates ironing without steam, the iron can be used as a dry-iron.
5. For models with auto steam control system the steam regulation is done by the temperature selector. When turning it to set temperature, it will automatically adjust steam position, as indicated on the knob. To stop the steam and use as a dry-iron, press down . To come back to steam function, press again.
6. Using the spray mist and steam jet function. Ensure that water tank is at least 1/4 full. Use spray mist to pre-dampen fabrics by pressing spray button several times to release a fi ne mist ( A ). To use the steam jet function, ensure that tank is at least 1/2 full. Press steam jet button several times to prime pump ( B ).
Page 4 of the AEG DB8050-U user manual — G
Pagina 4 · klik om te vergroten
Pagina 4

Getting started

AEG DB8050-U — Getting started diagram (page 4)
Afb. 7 · Getting started
AEG DB8050-U — Getting started diagram (page 4)
Afb. 8 · Getting started

G

7. Steaming hanging items. Vertical steam jet function is ideal for steaming curtains, suits and delicate fabrics. Hang item on a hanger, hold iron at a distance of 10–20 cm and press steam jet button.
8. 3-way Auto-OFF. If iron is left unattended on soleplate or on the side, it turns off after 30 seconds. If left unattended on the heel, it turns off after 8 minutes. To turn on, just begin to iron again.

Cleaning (do not use any detergent)

AEG DB8050-U — Cleaning (do not use any detergent) diagram (page 4)
Afb. 9 · Cleaning (do not use any detergent)
AEG DB8050-U — Cleaning (do not use any detergent) diagram (page 4)
Afb. 10 · Cleaning (do not use any detergent)
AEG DB8050-U — Cleaning (do not use any detergent) diagram (page 4)
Afb. 11 · Cleaning (do not use any detergent)
AEG DB8050-U — Cleaning (do not use any detergent) diagram (page 4)
Afb. 12 · Cleaning (do not use any detergent)

G

1. Always store iron on its heel rest. Unplug the iron. To clean exterior surfaces, use a damp soft cloth and wipe dry. Do not use any chemical solvents, as these will damage the surface.

2. Auto clean function. Fill water up to 100ml. Plug the iron and set the temperature to MAX. When the light turns green, unplug, hold it over a sink and pull the steam knob out (for EDB8040 set the steam knob to auto-clean). Gently shake until all water is gone. Insert the steam knob back and press until the click. Turn the iron on to dry the soleplate. ⚠ If the temperature knob is not on MAX position, it will not be possible to pull out or place back the steam knob.

3. Cleaning the soleplate. Do not use scouring pads or harsh cleaners on the soleplate as these will damage the surface. To remove burnt residue, iron over a damp cloth while iron is still hot. To clean the Glissium™ soleplate (enamelled), simply wipe with soft damp cloth and wipe dry.
Page 5 of the AEG DB8050-U user manual — EL
Pagina 5 · klik om te vergroten
Pagina 5

Disposal

Disposal Packaging materials The packaging materials are environ- mentally friendly and can be recycled. The plastic components are identifi ed by markings, e.g. >PEPS

for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city offi ce, your household waste disposal service or the shop where you purchased the product.

D

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences

EL

NL

F

Troubleshooting

Problem Possible cause Solution

Soleplate is not heating even though iron is turned on.

Connection problem Check main power supply cable, plug and outlet.

Temperature control is in MIN position. Select adequate temperature.

Iron does not produce steam. Not enough water in tank. Fill water tank (see “Getting started”, no 2).

Steam control is selected in non-steam position. Set steam control between positions of minimum steam and maximum steam (see “Ironing chart”).

Spray function does not work. Not enough water in tank. Fill water tank (see “Getting started”, no 2).

Steam jet and vertical steam jet function does not work.

Steam jet function was used very frequently within a short period.

Put iron on horizontal position and wait before using steam jet function.

Iron is not hot enough. Adjust the proper temperature to steam ironing (up to ). Put iron in vertical position and wait until temperature indicator light turns off .

Water leaks from the soleplate during ironing. The iron is not hot enough. Set the temperature dial to a temperature ( to maximum) suitable for steam ironing. Put the iron on its heel and wait until the light has gone out before you start ironing.

Flakes and impurities come out of the soleplate during ironing.

You have used hard water, which has caused scale fl akes to develop in the water tank.

Use the self-clean function one or more times.

Water leaks from the soleplate while the iron is cooling down or after it has been stored.

The iron has been put in horizontal position while there is still water in the water tank.

Empty the water tank and set the steam control to position off before storing the iron.

Old appliance

Page 6 of the AEG DB8050-U user manual — 3485 A DB80xx 02020711
Pagina 6 · klik om te vergroten
Pagina 6

www.aeg-home.com

♻ Printed on recycled paper

Electrolux Hausgeräte Vertriebs GmbH

3485 A DB80xx 02020711

Fürther Strasse 246 · D-90429 Nürnberg · Germany

Probleemoplossing

Probleemoplossing

Veelvoorkomende problemen, mogelijke oorzaken en oplossingen.

ProbleemMogelijke oorzaakOplossing
Soleplate is not heating even though iron is turned on.Connection problemCheck main power supply cable, plug and outlet. p.5
Soleplate is not heating even though iron is turned on.Temperature control is in MIN position.Select adequate temperature. p.5
Iron does not produce steam.Not enough water in tank.Fill water tank (see “Getting started”, no 2). p.5
Iron does not produce steam.Steam control is selected in non-steam position.Set steam control between positions of minimum steam and maximum steam (see “Ironing chart”). p.5
Spray function does not work.Not enough water in tank.Fill water tank (see “Getting started”, no 2). p.5
Steam jet and vertical steam jet function does not work.Steam jet function was used very frequently within a short period.Put iron on horizontal position and wait before using steam jet function. p.5
Steam jet and vertical steam jet function does not work.Iron is not hot enough.Adjust the proper temperature to steam ironing (up to ). Put iron in vertical position and wait until temperature indicator light turns of .f p.5
Water leaks from the soleplate during ironing.The iron is not hot enough.Set the temperature dial to a temperature ( to maximum) suitable for steam ironing. Put the iron on its heel and wait until the light has gone out before you start ironing. p.5
Flakes and impurities come out of the soleplate during ironing.You have used hard water, which has caused scale f lakes to develop in the water tank.Use the self-clean function one or more times. p.5
Water leaks from the soleplate while the iron is cooling down or after it has been stored.The iron has been put in horizontal position while there is still water in the water tank.Empty the water tank and set the steam control to position of fbefore storing the iron. p.5

Vraag stellen over de AEG DB8050-U

Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Nog geen vragen over de AEG DB8050-U

Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.

Origineel document

AEG DB8050-U handleiding-pdf

20 pagina's·3.6 MB·Stoomstrijkijzer·PDF
Klik op een bovenstaande pagina om deze hier te openen
Pagina 1 / …
100%
Pagina's laden…