
EN User Manual Warming Drawer
FR Mode d'emploi Chauffe Vaisselle
ES Manual de instrucciones Cajón calientaplatos
PT Manual de Instruções Gaveta de Aquecimento

DE Gebrauchsanweisung Wärmeschublade · NL Gebruiksaanwijzing Servieswarmer


Carefully read the instructions before installing and using the equipment. The manufacturer is not liable for improper installation and use of the equipment that may cause injuries and damage. Always keep the instructions at hand, so they can be easily referred to during use. This appliance complies with current safety standards. Improper use of the appliance may put the user at risk.
and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are given supervision or instructions concerning how to use the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Keep packaging materials away from children. Keep children and pets away from the appliance during
children without supervision. WARNING: Accessible parts may become hot during
use. Young children should be kept away.
become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised. During use the appliance becomes hot. Care should be
taken to avoid touching heating elements inside the oven. Depending on the temperature selected and the
operating time, the temperature inside the appliance may reach 80 ºC. To take crockery out of the crockery

warmer protect your hands by using oven gloves or an oven cloth. Do not sit or hang on the drawer. The telescopic
runners will be damaged. The maximum load capacity of the drawer is 25 kg. Do not store synthetic containers or easily inflammable
objects inside the crockery warmer. When you switch on the appliance such containers and objects may melt or catch fire. Fire danger. Do not use the appliance to heat up the air temperature
in the kitchen. The high temperatures reached may cause easily inflammable objects close to the appliance to catch fire. When you stop using the appliance at the end of its
working life, disconnect it from the power supply and render the electrical cable unusable so that the appliance is not a danger if, for example, children use it for playing.
replace the cable. The electric system must be equipped with a means for
disconnection, with a contact separation in all poles that provides full disconnection under overvoltage category III. If a plug is used for the electric connection, then it must
compliance with current norms. WARNING! Before connecting the appliance compare
the power data (voltage and frequency) indicated on the characteristics plate with those of the power supply in question. If these data do not match there may be problems. In case of doubt, contact an electrician. WARNING! If the electrical wire plug is removed, the
appliance must be installed and connected by a technician. Contact a qualified electrician who knows and respects current safety standards. The

manufacturer cannot be held responsible for damage resulting from fitting or connecting errors. WARNING! The electrical safety of the appliance can
only be guaranteed if it is earthed. The manufacturer cannot be held responsible for damage resulting from the absence of or defects in the installation’s protection system (e.g. electrical shock). WARNING! Only use the appliance once it has been
fitted into its built-in position. Only in this manner can it be guaranteed that users cannot access the electrical components. WARNING! Never open up the appliance’s frame.
Possible contacts with electrical conducting parts or changes to electrical or mechanical components may represent a danger to users’ safety and prejudice the correct working of the appliance.
scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass. Do not use steam cleaners to clean the appliance. Do not use high pressure or steam jet cleaning devices.
The steam may affect electrical components and cause a short circuit. The steam pressure may also cause damage to the appliance’s surface and components in the long term.
the electrical current when installation and repair work is being done. To disconnect the appliance from the current, one of the following conditions must apply: - The switchboard fuses / circuit breakers must be disconnected. - The plug should be removed from the socket. To remove the plug from the socket do not pull on the electric cable but rather pull out the plug itself directly.

parts carrying electrical current, must only be done by technicians authorised by the manufacturer. The manufacturer and retailers do not accept responsibility for any damaged caused to people, animals or property as a result of repairs and maintenance carried out by non-authorised personnel. WARNING! Repairs undertaken during the guarantee
period must only be done by technicians authorised by the manufacturer. If this is not the case then any damage resulting from the repair in question is excluded from the guarantee.

Handle
On/Off switch Anti-Slip mat
Control Lamp Drawer Grid *



*Drawer Grid only available with the model KD92903E/KD92923E
This appliance is equipped with a warm air circulation system. A fan distributes the heat generated by an electrical heating element throughout the interior of the appliance. The thermostat allows the user to define and control the temperature wanted for the crockery.
The circulating hot air that is generated heats up the crockery quickly and evenly. A metal grille protects both the heating element and the fan. The base of the drawer is fitted with a non-slip mat to prevent plates and dishes sliding around when the drawer is opened and closed.

3.3. Using the crockery warmer
To use the crockery warmer, proceed as follows: Put the crockery in the drawer. Select the function you want by turning
Before using the appliance for the first time you should clean the interior and the exterior, following the cleaning instructions given in the section “Cleaning and Maintenance”. Then heat the crockery warmer for at least 2 hours. For this, turn the temperature control to the maximum position (see section ‘Selecting temperature”). Make sure the kitchen is well-ventilated when you are doing this. The appliance’s parts are protected by a special product. For this reason, during the first heating an odour will be released. Both the odour and any smoke that may form will disappear after a short time and neither signifies that there is anything wrong with the connection or the appliance.
the thermostat control to the desired position. Switch on the appliance by pressing
the switch, which will light up. Close the drawer. Be careful not to use too much force when closing the drawer since it may open up again. Before taking out the warm crockery you must switch off the crockery warmer by pressing the switch again
By turning the thermostat control you can select temperatures between 30 and 80 °C. Do not force the thermostat control to the left of the “0” position or to the right of the maximum position since this may damage the appliance. As soon as the selected temperature is reached, the heating is turned off. When the temperature drops to a value below than the one selected, the heating is turned back on. The temperature scale is marked with absolute temperatures in ºC and also has symbols which correspond to the optimum temperatures for groups of crockery:


The control panel has a function and the on/off switch. The control panel is only visible when the drawer is open.

40ºC Proving dough Cups / glasses warming
80ºC Food Warming Low temperature cooking (only available with the model KD92903E)
However, as a guide, the following times are given for the thermostat setting and for uniform heating of the crockery:
Various factors affect heating times: Material and thickness of the crockery; Load quantity; How the crockery is arranged; Temperature setting. It is therefore not possible to give any precise heating times. As you use the crockery warmer more and more you will learn the best settings for your crockery.
temperatures over a longer period of cooking time. The cooking time is dependent on the piece of meat’s size. Use dishes made of glass, china or ceramics.
3.6. Suggestions for the function Keep Food Warm and Food Warming: Preheat the Warming Drawer 15 minutes to ensure the interior space has the required temperature.
Preheat the device with the dishes at
3.7. Low temperature cooking (only available with the model KD92903E) With the low temperature cooking meat can be gently prepared at low
80°C for 10 minutes. Sear the meat in a pan using fat and
place it into the heat drawer on the preheated dishes. Keep the setting at 80° C.


Roast beef in one piece 1kg on all sides, on each
Loin, in one piece 1kg on all 4 sides, on
Filet, whole 500-600 g on all sides, on each
Loin 600 -1000g all around 10-15min. 2 - 3hrs
Gigot with haunch 2kg on all sides, on each
Gigot steak of the haunch 2kg on all sides, on each

Load capacity depends on the size of the crockery items:
KD 91403 / KD 91404 KD 92903 / KD 92923
6 persons servings 12 persons servings
6 x 24cm Dinner Plates 12 x 24cm Dinner Plates
6 x 10cm Soup Bowls 12 x 10cm Soup Bowls
1 x 19cm Serving Dish 1 x 19cm Serving Dish
1 x 17cm Serving Dish 1 x 17cm Serving Dish
1 x 32cm Meat Plates 2 x 32cm Meat Plates
20 dishes with 28 cm 40 dishes with 28 cm
80 espresso coffee cups 160 espresso coffee cups
40 tea cups 80 tea cups

Cleaning is the only maintenance action that is required normally. Warning! Cleaning must be done with the crockery warmer disconnected from the electrical power supply. Remove the plug from the power socket or disconnect the crockery warmer power supply circuit. Do not use aggressive or abrasive cleaning products, abrasive sponges or pointed objects since stains or abrasion marks may appear.
Do not use high pressure or steam jet cleaning appliances. 5.1. Appliance front and control panel The crockery warmer can be cleaned using just a damp cloth. If it is very dirty, add a few drops of washing-up liquid to the washing water. Wipe the surfaces dry using a dry cloth. For stainless steel fronted crockery warmers, special products for treatment of

If it is very dirty add a few drops of washing-up liquid to the washing water. Wipe the surfaces dry using a dry cloth. Avoid water entering through the air circulation opening. Only use the crockery warmer again when it is completely dry. 5.3. Mat with non-slip surface The non-slip surface mat can be removed to facilitate cleaning of the drawer. The mat can be cleaned by hand using hot water with a few drops of washing-up liquid. Dry thoroughly. The non-slip mat should only be replaced when it is completely dry.
stainless steel surfaces can be used. These products prevent the surfaces becoming dirty again for some time. Apply a thin layer of such a product on the surface using a soft cloth
On aluminium fronted crockery warmers use a gentle glass cleaning product and a soft cloth that does not release fluff. Wipe horizontally without pressing on the surface since aluminium is sensitive to scratches and cuts. 5.2. Interior of the crockery warmer Clean the inside of the crockery warmer regularly using a damp cloth.
Heating time depends on several
factors, such as, for example: Crockery material type and thickness. Quantity of crockery. How the crockery is arranged. The crockery doesn’t heat up at all.
Before contacting Technical Assistance, check on the following:
the fan is operating then the heating element is broken; if the fan is not operating then the fan is broken. The switchboard fuses / circuit
The crockery doesn’t heat up enough.
breakers have fused / tripped out. The crockery is heating up too much: The temperature selector is broken. The on/off switch does not light up:
been selected. The air circulation orifices are
covered by the crockery. The crockery was left to heat up for
The switch’s pilot light has blown.
sufficient time.
Recycle the materials with the
Do not dispose appliances marked
Symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances.
with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.

8.1. Before installation Check that the input voltage indicated on the characteristics plate is the same as the voltage of the power outlet you are going to use. Open the drawer and take out all the accessories and remove the packing material.


8.3. Electrical Connection Electrical installation must be performed by an electrician qualified in accordance with the legislation in force. Before connecting the crockery warmer to the electric mains, check that the voltage and frequency of the mains matches that which is shown on the rating plate located in the heating block inside. The electric connection is made via an omnipolar switch, which is suitable for the intensity to be tolerated and which has a minimum gap of 3mm between its contacts, which will ensure disconnection in case of emergency or when cleaning the crockery warmer. If a plug is used for the electric connection, then it must be accessible after installation. The connection should include correct earthing, in compliance with current norms.
8.2. Installation To build-in the crockery warmer in combination with another appliance there must be a fixed, interim shelf in the housing unit to support the weight of both appliances. The appliance to be combined with the crockery warmer will be placed directly on the latter without any need to have a separating shelf. To build-in the appliance which is combined with the crockery warmer, follow the instructions set out in the respective instructions and fitting booklet. The relevant installation dimensions are indicated in mm in the diagrams shown at the end of this booklet. Proceed as follows: 1. Place the crockery warmer on the shelf and slide it towards the interior of the niche in such a way that it is centred and completely lined up with the front of the unit.
WARMER MUST BE EARTHED. If the flexible supply cable fitted to the crockery warmer ever needs to be changed, it should be replaced by an official After Sales Service, because it requires special tools. The manufacturer and retailers do not accept responsibility for any damage that may be caused to people, animals or property if these installation instructions are not observed.


Pagina's waarnaar wordt verwezen in deze handleiding — fabrikant, ondersteuning en downloads.
Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.
Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.