
Thank you for choosing our product. We hope you enjoy using the device.
Symbols in these Instructions for Use Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the machine:
These symbols may be found on the machine and are intended to indicate the following:
The lightning symbol should advise the user of parts in the inside of the device which carry dangerously high voltage levels.
The symbol with an exclamation mark should advise the user of important operation or maintenance instructions in the accompany- ing documentation. Devices bearing this symbol work with a “class 1 laser” for tracing the CD. The built-in safety switches should prevent the user being exposed to dangerous laser light, which is invisible to the human eye, when the CD compartment is opened.
Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the in- ternal packing. If you give this device to other people, please also pass on the operating instructions.
Children and Frail Individuals • In order to ensure your children‘s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.
This device works with a class 1 laser.

1 Handle 2 Telescopic antenna 3 CD compartment 4 Band selector switch (FM ST / AM) 5 Radio scale 6 TUNING control 7 PUSH OPEN CD tray (open/close) 8 / button (Play/Pause / deactivate standby) 9 NEXT button (forward search) 10 FOLD+/+10 button (Skip track/ album up) 11 LCD display 12 PROG/P-MODE button (Memory/Repeat/random play- back) 13 FM ST. control lamp 14 FOLD-/-10 button (Skip track/ album down) 15 BACK button (reverse search) 16 STOP button 17 POWER control lamp 18 VOLUME (volume control) 19 FUNCTION Function selector switch (RADIO / OFF / CD/MP3/AUX)
Reverse (not shown) AC Mains connection AUX IN jack (3.5 mm jack plug)
Underside (not shown) Battery compartment
This device is used for:
It is intended exclusively for this purpose and may only be used as such. It may only be used in the manner described in these instruc- tions for use. The device must not be used for commercial purposes.
Any other use of this device is considered to be contrary to the intended use and may result in damage to materials or even personal injury.
The firm ETV – Elektro-Technische Vertriebsgesellschaft mbH does not accept any liability for damage caused as a result of the use of this device contrary to its intended use.
Volume The desired volume can be sent using the VOLUME regula- tor (18).
Switch-off The machine is switched off when the function selector switch (19) is turned to the OFF position. The POWER (17) control lamp goes off. Unplug the device.

AUX IN jack 1. Connect the 3.5 mm stereo RCA cable to an external audio source. If required, use a suitable adapter (not included). 2. Insert the other end of the cable into the AUX-IN jack (Back Side) on the unit. 3. Set the function selector switch (19) to the “CD/MP3/ AUX” position. 4. Start the playback of your audio source. Listen to the sound playback via the speaker. 5. For the further procedure, please refer to the user manual of the external audio source.
“ or “MP3 “ message are shown on the display.
Always keep the CD deck closed.
Description of the CD buttons
/ (8) You can briefly interrupt and resume playback using this button. The symbol“ “ flashes on the display. Pressing again continues playback.
VHF (Stereo) = FM.ST, Medium wave = AM (Mono)
2. Tune in the desired station with the station adjustment knob TUNING (6). 3. The FM ST. indicator lamp (13) will only be lit, when the station is received in stereo quality. If reception is too weak and there is noise on the station being received, this lamp will flicker. 4. For FM mode pull out the telescopic antenna (2) and turn it to improve reception. 5. An aerial is integrated into the device for the reception of AM stations. The machine can be aligned to the station by turning it. In this frequency band programs are trans- mitted in “mono” only.
NEXT/ BACK (9/15) When playing an audio CD or a CD in MP3 format: With NEXT you can jump to the next or previous track etc. • If the button is kept pressed down, the machine starts to search through the tracks.
The BACK button can be used as follows: Press once = This jumps back to the previous track. Press twice = This plays the song before etc. If the button is kept pressed down, the machine starts to search through the tracks.
STOP (16) The CD stops.
This is how you play a CD 1. Turn the function selector switch (19) to the “CD/MP3/ AUX”. 2. Open the CD tray (3) by pressing the PUSH OPEN button (7). 3. Insert an audio CD with the printed side facing upwards on to the central cone so that the CD clicks into place and then close the lid of the CD compartment. 4. After a few seconds the total number of songs/tracks is shown in the display.
When playing an audio CD: Press once = (The symbol flashes) the current track is repeated continuously.

Press twice = (The symbol is lit) the whole CD is played continuously. Press three times = (RDM appears in the display) all titles are
The device stops automatically after all the programmed titles have been played back. The PROG display will go out and the programmed sequence will be deleted from the memory.
replayed successively in random order. Press four times = (INTRO appears in the display) every title
of the CD is played for 10 seconds each. Press five times = All functions are cancelled. The normal
play mode is resumed.
Only when playing CD’s in MP3 format: Press once = (The symbol flashes) the current track is repeated continuously. Press twice = The selected folder of the MP3 CD is repeated continuously ( FOLDER appears in the display). Press three times = (The symbol is lit) the whole CD is played continuously. Press four times = (RDM appears in the display) All titles are
With this device it is possible to play back pieces of music in MP3 format. The device also supports all standard CD types: CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks can be compressed and stored on these CDs. Your machine detects an MP3 CD automatically (the total number of tracks and MP3s appears in the display). If you would like to play one of these CDs, proceed as described under “Playing CDs/MP3”. Tracks can be programmed as described under “Playing Back Programmed Tracks”.
replayed successively in random order. Press five times = The function is deactivated and the CD is
played in the normal mode.
Please note: There are a number of different recording and compression methods, as well as quality differences between CDs and self- recorded CDs.
Furthermore, the music industry does not adhere to fixed standards (copy protection).
For these reasons it is possible that in rare cases there are problems with the playback of CDs and MP3 CDs. This is not a malfunction of the device.
This can be used to program any desired sequence of tracks. 1. Press the STOP button (16). 2. Press the “PROG./P-MODE” button (12). “P01” (preset location) appears on the display and PROG flashes on the display. Use the NEXT/ BACK buttons (9/15) to select the desired track and then press the “PROG./ P-MODE” button again. The display changes to memory slot P02. 3. Select the next track with the NEXT/ BACK button and press the “PROG./P-MODE” button again. Repeat the procedure until all the desired tracks are selected.
Symptoms Course Solution CD can not be played back.
CD is not inserted or inserted incor- rectly.
Ensure that the disc is inserted with the label facing upwards. Batteries too weak. Insert new batteries
or operate the device with the mains lead. CD jumps dur- ing playback.
Check the disc for fingerprints, dirt or scratches. Device cannot be operated.
Check the disc for fingerprints, dirt or scratches.
Device crashes and “hangs”.
Disconnect the power supply for 5 sec. Then switch the device on again.

Meaning of the “Dustbin” Symbol Protect our environment: do not dispose of electrical equip- ment in the domestic waste.
Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.
Model: SR 4352 CD/MP3 Power supply: AC 230 V~ 50 Hz Battery operation: 6 x 1.5 V Type C/R14 Power consumption: 13 W Protection class: II Net weight: 1.39 kg Radio section:
This helps avoid the potential effects of incorrect disposal on the environment and human health.
This will contribute to the recycling and other forms of reutili- sation of electrical and electronic equipment.
Frequency ranges: FM 88 ~ 108.0 MHz
Information concerning where the equipment can be dis- posed of can be obtained from your local authority.
AM 540 ~ 1600 KHz
The right to make technical and design modifications in the course of continuous product development remains reserved.
This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.
Veelvoorkomende problemen, mogelijke oorzaken en oplossingen.
| Probleem | Mogelijke oorzaak | Oplossing | |
|---|---|---|---|
| CD can not be played back. | Ensure that the disc is inserted with the label facing upwards. | p.4 | |
| CD can not be played back. | Insert new batteries or operate the device with the mains lead. | p.4 | |
| CD jumps dur- ing playback. | Check the disc for fni gerprints, dirt or scratches. | p.4 | |
| Device cannot be operated. | Disconnect the power supply for 5 sec. Then switch the device on again. | p.4 |
Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.
Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.