NL
Ferm logo
Officiële handleiding

Ferm JSM1025P

128 pagina's·4.6 MB·Zaagmachine·PDF·ENJA
Ferm JSM1025P
Inhoudsopgave 21 secties Fig. A · Fig. B · Fig. C · Fig. D · … TonenVerbergen
Page 2 of the Ferm JSM1025P user manual — Fig. A
Pagina 2 · klik om te vergroten
Pagina 2
Ferm JSM1025P — Fig. A diagram (page 2)
Afb. 1 · Fig. A
Ferm JSM1025P — Fig. A diagram (page 2)
Afb. 2 · Fig. A
Ferm JSM1025P — Fig. A diagram (page 2)
Afb. 3 · Fig. A
Ferm JSM1025P — Fig. A diagram (page 2)
Afb. 4 · Fig. A
Ferm JSM1025P — Fig. A diagram (page 2)
Afb. 5 · Fig. A
Ferm JSM1025P — Fig. A diagram (page 2)
Afb. 6 · Fig. A
Ferm JSM1025P — Fig. A diagram (page 2)
Afb. 7 · Fig. A
Ferm JSM1025P — Fig. A diagram (page 2)
Afb. 8 · Fig. A
Ferm JSM1025P — Fig. A diagram (page 2)
Afb. 9 · Fig. A

Fig. A

Page 3 of the Ferm JSM1025P user manual — Fig. C
Pagina 3 · klik om te vergroten
Pagina 3
Ferm JSM1025P — Fig. B diagram (page 3)
Afb. 10 · Fig. B
Ferm JSM1025P — Fig. B diagram (page 3)
Afb. 11 · Fig. B
Ferm JSM1025P — Fig. B diagram (page 3)
Afb. 12 · Fig. B
Ferm JSM1025P — Fig. B diagram (page 3)
Afb. 13 · Fig. B
Ferm JSM1025P — Fig. B diagram (page 3)
Afb. 14 · Fig. B

Fig. B

Ferm JSM1025P — Fig. B diagram (page 3)
Afb. 15 · Fig. B

Fig. C

Page 4 of the Ferm JSM1025P user manual — Fig. E
Pagina 4 · klik om te vergroten
Pagina 4
Ferm JSM1025P — Fig. D diagram (page 4)
Afb. 16 · Fig. D

7 17 11

Fig. D

Ferm JSM1025P — 7 17 11 diagram (page 4)
Afb. 17

Fig. E

Page 5 of the Ferm JSM1025P user manual — A
Pagina 5 · klik om te vergroten
Pagina 5

9 The product is in accordance with the applicable safety standards in the European directives.

JIG SAW 750W

Thank you for buying this Ferm product. By doing so you now have an excellent product, delivered by one of Europe‘s leading suppliers. All products delivered to you by Ferm are manufactured according to the highest standards of performance and safety. As part of our philosophy we also provide an excellent customer service, backed by our comprehensive warranty. We hope you will enjoy using this product for many years to come.

  • ADDITIONAL SAFETY WARNINGS FOR JIGSAWS
  • Do not work materials containing asbestos. Asbestos is considered carcinogenic.
  • Wear safety goggles, hearing protection and if necessary other protective means, such as safety gloves, safety shoes, etc.
  • Before use, remove all nails and other metal objects from the workpiece.
  • Make sure that the workpiece is properly supported or fixed.
  • Do not use the machine without the guard.
  • Inspect the saw blade before each use. Do not use saw blades which are bent, cracked, or otherwise damaged.
  • Make sure that the saw blade is properly mounted.
  • Only use saw blades that are suitable for use with the machine.
  • Only use saw blades with the correct dimensions.
  • Do not use other accessories than saw blades.
  • Do not use saw blades made of HSS steel.
  • Do not use the machine on workpieces requiring a maximum sawing depth that exceeds the maximum sawing depth of the saw blade.
  • Hold the machine by the insulated gripping surfaces where the saw blade may contact hidden wiring or the mains cable. If the saw blade contacts a ‘live‘ wire, the exposed metal parts of the machine can also become ‘live‘. Risk of electric shock.
  • Let the machine run at no load in a safe area after mounting the saw blade. If the machine vibrates strongly, immediately switch off the machine, remove the mains plug from the mains, and try to solve the problem.
  • Beware that the saw blade continues to rotate for a short period after switching off the machine. Do not attempt to bring the saw blade to a standstill yourself.

SAFETY WARNINGS

1 WARNING Read the enclosed safety warnings, the additional safety warnings and the instructions. Failure to follow the safety warnings and the instructions may result in electric shock, fire and/or serious injury. Keep the safety warnings and the instructions for future reference.

The following symbols are used in the user manual or on the product:

1 Read the user manual.

2 Risk of personal injury.

3 Risk of electric shock.

4 Immediately remove the mains plug from the mains if the mains cable becomes damaged and during cleaning and maintenance.

5 Wear safety goggles. Wear hearing protection.

A

Wear a dust mask.

7 Double insulated.

Kickback Kickback is the upward and backward movement of the saw blade when the saw blade unexpectedly touches an object. Securely hold the machine during use. Keep your attention focused on the operation.

Do not dispose of the product in unsuitable containers.

Page 6 of the Ferm JSM1025P user manual — ASSEMBLY
Pagina 6 · klik om te vergroten
Pagina 6

Kickback is usually caused by: - unintentionally touching hard objects or materials with the rotating saw blade; - a blunt saw blade; - a saw blade that is not properly mounted; - sawing into a previous cut; - a lack of attention to the operation; - an instable stance.

may significantly increase the exposure level - the times when the tool is switched off or when

it is running but not actually doing the job, may signifi cantly reduce the exposure level

Protect yourself against the effects of vibration by maintaining the tool and its accessories, keeping your hands warm, and organizing your work patterns

ELECTRICAL SAFETY

3 Always check that the voltage of the power supply corresponds to the voltage on the rating plate.

DESCRIPTION (FIG. A)

Your pendulum action jigsaw has been designed for sawing wood, metal, plastics, ceramics, rubber, etc. to any required size and in any required shape. 1. On/off switch 2. Lock-on button 3. Speed adjustment wheel 4. Pendulum action switch 5. Guard 6. Saw blade holder 7. Saw shoe 8. Locking bolt for parallel guide 9. Dust extraction connection 10. Grip 11. Allen key

  • Do not use the machine if the mains cable or the mains plug is damaged.
  • Only use extension cables that are suitable for the power rating of the machine with a minimum thickness of 1.5 mm 2 . If you use a extension cable reel, always fully unroll the cable.

TECHNICAL DATA Mains voltage V~ 230-240

Mains frequency Hz 50

Power input W 750

No-load speed min-1 600 - 2,800

Max. sawing depth (wood) mm 110

Max. sawing stroke mm 20

ASSEMBLY

Mitre angle ° +45 - -45

Number of pendulum positions 3+1

3 Before assembly, always switch off the machine and remove the mains plug from the mains.

Weight kg 3.25

NOISE AND VIBRATION Sound pressure (Lpa) dB(A) 89

Mounting and removing the saw blade (fig. B) Refer to the table below to select the required saw blade.

Acoustic power (Lwa) dB(A) 100

Uncertainty (K) dB(A) 3

Vibration (wood) m/s2 8.87

Vibration (metal) m/s2 5.51

Uncertainty (K) m/s2 1.5

2 Wear hearing protection.

Fine Steel, aluminium, plastic

Very fine Wood (curves)

Vibration level The vibration emission level stated in this instruction manual has been measured in accordance with a standardised test given in EN 60745; it may be used to compare one tool with another and as a preliminary assessment of exposure to vibration when using the tool for the applications mentioned

2 Do not attempt to remove the guard from the machine.

Fitting a saw blade Fig. B The machine is equipped with a quick fit system. • Turn the clamping ring (13) of the saw blade holder as far to the left as possible and hold it there.

- using the tool for different applications, or with

different or poorly maintainted accessories,

Saw blade Material · Coarse Wood · Medium Wood

Page 7 of the Ferm JSM1025P user manual — USE
Pagina 7 · klik om te vergroten
Pagina 7

2 Do not set the sawing speed during use.

  • Place the saw blade in the blade holder.
  • Let go of the clamping ring.
  • Make sure when changing the saw blade that the blade holder is free of material debris (such as splinters of wood or metal).
  • Before use, always check that the saw blade is securely fixed.
  • Turn the speed adjustment wheel (3) to the required position.
  • For hard materials, use a saw blade with fine teeth and select a lower speed.
  • For soft materials, use a saw blade with coarse teeth and select a higher speed.
  • Removing the saw blade
  • Turn the clamping ring of the saw blade holder as far to the left as possible and hold it there.
  • Remove the saw blade from its holder.
  • Let go of the clamping ring.

Setting the mitre angle (fig. D) The mitre angle is variable between -45° and +45°.

2 Do not set the mitre angle during use.

Mounting and removing the parallel guide (fig. C) The parallel guide is used for sawing along edges at a maximum distance of 16 cm.

  • Slacken the Allen screws (17) using the Allen key (11).
  • Tilt the saw shoe (7) to the required position.
  • Tighten the Allen screws (17) using the Allen key (11).
  • Mounting
  • Slacken the Allen screws (8) using the Allen key (11).
  • Insert the parallel guide (16) into the saw shoe (7).
  • Set the parallel guide (16) to the required position.
  • Tighten the Allen screws (8) using the Allen key (11).

Using the pendulum action switch (fig. A) The pendulum action switch is used to set the way in which the teeth of the saw blade grip the material. The pendulum action switch can be set to 4 positions.

2 Do not set the pendulum position during use.

  • Removing
  • Slacken the Allen screws (8) using the Allen key (11).
  • Remove the parallel guide (16) from the saw shoe (7).
  • Tighten the Allen screws (8) using the Allen key (11).
  • Turn the pendulum action switch (4) to required position according to the material to be worked. Refer to the table below to select the required position.

USE

  • Switching on and off (fig. A)
  • To switch on the machine, press the on/off switch (1).
  • To switch the machine to continuous mode, keep the on/off switch (1) pressed and simultaneously press the lock-on button (2).
  • To switch off the machine, release the on/off switch (1).
  • Dust extraction (fig. E)
  • Insert the dust extraction adapter (18) into the dust extraction connection (9).
  • Connect the hose of a vacuum cleaner to the dust extraction adapter (18).

Setting the sawing speed (fig. A) The speed adjustment wheel is used for setting the sawing speed. The speed adjustment wheel can be set to 6 positions. The ideal sawing speed depends on the profile and the teeth of the saw blade and on the material to be worked.

Show 7 more labels / short text on this page
Material Pendulum position · Wood 1-3 · Plastics 1 · Aluminium 0-1 · Steel 0 · Ceramics 0 · Rubber 0
Page 8 of the Ferm JSM1025P user manual — WARRANTY
Pagina 8 · klik om te vergroten
Pagina 8
  • Draw a line to define the direction in which to guide the saw blade.
  • Firmly hold the machine by the grip.
  • Set the sawing speed.
  • Set the mitre angle.
  • Set the pendulum position.
  • Switch on the machine.
  • Wait until the machine has reached full speed.
  • Place the saw shoe on the workpiece.
  • Slowly move the machine along the pre-drawn line, firmly pressing the saw shoe against the workpiece.
  • Do not apply too much pressure on the machine. Let the machine do the work.
  • Switch off the machine and wait for the machine to come to a complete standstill before putting the machine down.

ENVIRONMENT

The product, the accessories, and the packaging must be sorted for environmentally friendly recycling.

Only for EC countries Do not dispose of power tools into domestic waste. According to the European Guideline 2012/19/EU for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly way.

CLEANING AND MAINTENANCE

3 Before cleaning and maintenance, always switch off the machine and remove the mains plug from the mains.

  • Regularly clean the housing with a soft cloth.
  • Keep the ventilation slots free from dust and dirt. If necessary, use a soft, moist cloth to remove dust and dirt from the ventilation slots.
  • Regularly clean the saw blade to avoid inaccuracies during use.
  • Regularly lubricate the guide roller.

Replacing the saw blade (fig. B) Worn or damaged saw blades must be replaced immediately.

2 Only use sharp and undamaged saw blades.

  • To remove the old saw blade (14), proceed as described in the section „Mounting and removing the saw blade“.
  • To mount the new saw blade (14), proceed as described in the section „Mounting and removing the saw blade“.

WARRANTY

Consult the enclosed warranty terms.

Disposal

Page 9 of the Ferm JSM1025P user manual — Spare parts list
Pagina 9 · klik om te vergroten
Pagina 9

Spare parts list

JSM1025P

No. Description Position 409050 Safety cover 1 409051 Needle bearing HK0608 8 409052 Big gear set 7|9..12|14|15|17|19 409053 Needle bearing HK0810 13 409054 Gear box seal 20 409055 Bearing seal 28 409056 Bearing 609.2RZ 29 409057 Rotor 30|31 409058 Bearing 608.2RZ 32 409059 Bearing cover 608.RZ 33 409060 Stator 36 409061 Carbon brush set 40 409062 Bush holder + brush spring 39|41|42 409063 Pendulum system 44...48 409064 Dust blow switch 49 409065 Switch 50 409066 Speed switch 53 409067 Blade guide wheel arm set 58...62 409068 Slide bushing gear shaft 2pc 63 409069 Splinter plate 78 409070 Base plate set 80|81|85 409071 Scratch guard 82 409072 Vacuum adapter 91

Page 10 of the Ferm JSM1025P user manual — Spare parts list
Pagina 10 · klik om te vergroten
Pagina 10
Ferm JSM1025P — Spare parts list diagram (page 10)
Afb. 18 · Spare parts list
Page 11 of the Ferm JSM1025P user manual — Spare parts list
Pagina 11 · klik om te vergroten
Pagina 11
Page 11 of the Ferm JSM1025P user manual — Spare parts list
Page 12 of the Ferm JSM1025P user manual — EN55014-1, EN55014-2, EN60745-1, EN60745-2-11
Pagina 12 · klik om te vergroten
Pagina 12

DECLARATION OF CONFORMITY

JSM1025P JIG SAW

(EN) We declare under our sole responsibility that this product is in conformity with

(SK) Vyhlasujeme na našu výhradnú zodpovednosť, že tento výrobok je v zhode a súlade

directive 2011/65/EU of the European parliament and of the council of 8 June on the restriction of the use of certain hazardous substances in electrical and electronic equipment is in conformity and accordance with the following standards and regulations: (DE) Der Hersteller erklärt eigenverantwortlich, dass dieses Produkt der Direktive

s nasledujúcimi normami a predpismi: Je v súlade s normou 2011/65/EÚ Európske- ho parlamentu a Rady z 8. júna 2011 týkajúcej sa obmedzenia používania určitých nebezpečných látok v elektrickom a elektronickom vybavení. (SL) S polno odgovornostjo izjavljamo, da je ta izdelek v skladu in da odgovarja nasledn-

jim standardom terpredpisom: je v skladu z direktivo 2011/65/EU Evropskega parla- menta in Sveta z dne 8. junij 2011 o omejevanju uporabe določenih nevarnih snovi v električni in elektronski opremi. (PL) Deklarujemy na własną odpowiedzialność, że ten produkt spełnia wymogi zawarte w

2011/65/EU des Europäischen Parlaments und des Rats vom 8. Juni 2011 über die Einschränkung der Anwendung von bestimmten gefährlichen Stoffen in elektrischen und elektronischen Geräten entspricht. den folgenden Standards und Vorschriften entspricht: (NL) Wij verklaren onder onze volledige verantwoordelijkheid dat dit product voldoet aan

następujących normach i przepisach: jest zgodny z Dyrektywą 2011/65/UE Parla- mentu Europejskiego i Rady z dnia 8 czerwca 2011 r. w sprawie ograniczenia stoso- wania niektórych niebezpiecznych substancji w sprzęcie elektrycznym i elektronic- znym. (LT) Prisiimdami visą atsakomybę deklaruojame, kad šis gaminys atitinka žemiau

de conform Richtlijn 2011/65/EU van het Europees Parlement en de Raad van 8 juni 2011 betreffende beperking van het gebruik van bepaalde gevaarlijke stoffen in elektrische en elektronische apparatuur en in overeenstemming is met de volgende standaarden en reguleringen: (FR) Nous déclarons sous notre seule responsabilité que ce produit est conforme aux

paminėtus standartus arba nuostatus: atitinka 2011 m. birželio 8 d. Europos Parlamento ir Tarybos direktyvą 2011/65/EB dėl tam tikrų pavojingų medžiagų naudojimo elektros ir elektroninėje įrangoje apribojimo. (LV) Ir atbilstoša Eiropas Parlamenta un Padomes 2011. gada 8. jūnija Direktīvai

standards et directives suivants: est conforme à la Directive 2011/65/EU du Parlement Européen et du Conseil du 8 juin 2011 concernant la limitation d’usage de certaines substances dangereuses dans l’équipement électrique et électronique. (ES) Declaramos bajo nuestra exclusiva responsabilidad que este producto cumple con

2011/65/ES par dažu bīstamu vielu izmantošanas ierobežošanu elektriskās un elektroniskās iekārtās. (ET) Apgalvojam ar visu atbildību, ka šis produkts ir saskaņā un atbilst sekojošiem stand-

las siguientes normas y estándares de funcionamiento: se encuentra conforme con la Directiva 2011/65/UE del Parlamento Europeo y del Consejo de 8 de junio de 2011 sobre la restricción del uso de determinadas sustancias peligrosas en los equipos eléctricos y electrónicos. (PT) Declaramos por nossa total responsabilida-de que este produto está em

artiem un nolikumiem: ir atbilstoša Eiropas Parlamenta un Padomes 2011. gada 8. jūnija Direktīvai 2011/65/ES par dažu bīstamu vielu izmantošanas ierobežošanu elektriskās un elektroniskās iekārtās. (RO) Declarăm prin aceasta cu răspunderea deplină că produsul acesta este în

conformidade e cumpre as normas e regulamentações que se seguem: está em conformidade com a Directiva 2011/65/EU do Parlamento Europeu e com o Conselho de 8 de Junho de 2011 no que respeita à restrição de utilização de determinadas substâncias perigosas existentes em equipamento eléctrico e electrónico. (IT) Dichiariamo, sotto la nostra responsabilità, che questo prodotto è conforme alle

conformitate cu următoarele standarde sau directive: este în conformitate cu Directiva 2011/65/UE a Parlamentului European şi a Consiliului din 8 iunie 2011 cu privire la interzicerea utilizării anumitor substanţe periculoase la echipamentele electrice şi electronice. (HR) Izjavljujemo pod vlastitom odgovornoĻśu da je strojem ukladan sa slijedeśim

standardima ili standardiziranim dokumentima i u skladu sa odredbama: usklađeno s Direktivom 2011/65/EU europskog parlamenta i vijeća izdanom 8. lipnja 2011. o ograničenju korištenja određenih opasnih tvari u električnoj i elektroničkoj opremi. (SRL)Pod punom odgovornošću izjavljujemo da je usaglašen sa sledećim standardima ili

normative e ai regolamenti seguenti: è conforme alla Direttiva 2011/65/UE del Parlamento Europeo e del Consiglio dell’8 giugno 2011 sulla limitazione dell’uso di determinate sostanze pericolose nelle apparecchiature elettriche ed elettroniche. (SV) Vi garanterar på eget ansvar att denna produkt uppfyller och följer följande

normama: usaglašen sa direktivom 2011/65/EU Evropskog parlamenta i Saveta od 8.juna.2011. godine za restrikciju upotrebe određenih opasnih materija u električnoj i elektronskoj opremi. (RU) Под свою ответственность заявляем, что данное изделие соответствует

standarder och bestämmelser: uppfyller direktiv 2011/65/EU från Europeiska parlamentet och EG-rådet från den 8 juni 2011 om begränsningen av användning av farliga substanser i elektrisk och elektronisk utrustning. (FI) Vakuutamme yksinomaan omalla vastuullamme, että tämä tuote täyttää seuraavat

следующим стандартам и нормам: соответствует требованиям Директивы 2011/65/EU Европейского парламента и совета от 8 июня 2011 г. по ограничению использования определенных опасных веществ в электрическом и электронном оборудовании (UK) На свою власну відповідальність заявляємо, що дане обладнання відповідає

standardit ja säädökset: täyttää Euroopan parlamentin ja neuvoston 8. kesäkuuta 2011 päivätyn direktiivin 2011/65/EU vaatimukset koskien vaarallisten aineiden käytön rajoitusta sähkö- ja elektronisissa laitteissa. (NO) Vi erklærer under vårt eget ansvar at dette produktet er i samsvar med følgende

standarder og regler: er i samsvar med EU-direktivet 2011/65/EU fra Europa- parlamentet og Europa-rådet, pr. 8 juni 2011, om begrensning i bruken av visse farlige stoffer i elektrisk og elektronisk utstyr. (DA) Vi erklærer under eget ansvar, at dette produkt er i overensstemmelse med følgende

наступним стандартам і нормативам: задовольняє вимоги Директиви 2011/65/ ЄС Європейського Парламенту та Ради від 8 червня 2011 року на обмеження використання деяких небезпечних речовин в електричному та електронному обладнанні. (EL) Δηλώνουμε υπεύθυνα ότι το προϊόν αυτό συμφωνεί και τηρεί τους παρακάτω

standarder og bestemmelser: er i overensstemmelse med direktiv 2011/65/EU fra Europa-Parlamentet og Rådet af 8. juni 2011 om begrænsning af anvendelsen af visse farlige stoffer i elektrisk og elektronisk udstyr. (HU) Felelősségünk teljes tudatában kijelentjük, hogy ez a termék teljes mértékben

κανονισμούς και πρότυπα: συμμορφώνεται με την Οδηγία 2011/65/ΕΕ του Ευρωπαϊκού Κοινοβουλίου και του Συμβουλίου της 8ης Ιουνίου 2011 για τον περιορισμό της χρήσης ορισμένων επικίνδυνων ουσιών σε ηλεκτρικό και ηλεκτρονικό εξοπλισμό. (AR) :ةيلاتلا تاهيجوتلاو ريياعملا عم قفاوتي جتنملا اذه نأ اندحو انتيلوئسم ىلع نلعن (TR) Tek sorumlusu biz olarak bu ürünün aşağıdaki standart ve yönergelere uygun olduğunu

megfelel az alábbi szabványoknak és előírásoknak: je v souladu se směrnicí 2011/65/EU Evropského parlamentu a Rady EU ze dne 8. června 2011, která se týká omezení použití určitých nebezpečných látek v elektrických a elektronických zařízeních. (CS) Na naši vlastní zodpovědnost prohlašujeme, že je tento výrobek v souladu s

beyan ederiz. (МК) Изјавуваме со наша целосна одговорност дека производот е во согласност со

Смерницата 2011/65/EU на Европскиот парламент и е во согласност според Советот од 9 јуни за ограничување на користење на одредени опасни супстанции во електричната и електронската опрема и дека е според следните стандарди и регулативи:

následujícími standardy a normami: Je v súlade s normou 2011/65/EÚ Európskeho parlamentu a Rady z 8. júna 2011 týkajúcej sa obmedzenia používania určitých nebezpečných látok v elektrickom a elektronickom vybavení.

EN55014-1, EN55014-2, EN60745-1, EN60745-2-11

EN61000-3-2, EN61000-3-3

2006/42/EC, 2014/30/EU, 2011/65/EU, 2012/19/EU

Zwolle, 01-10-2019 H.G.F Rosberg CEO FERM

FERM - Lingenstraat 6 - 8028 PM - Zwolle - The Netherlands

Page 13 of the Ferm JSM1025P user manual — WWW.FERM.COM ©2019 FERM
Pagina 13 · klik om te vergroten
Pagina 13

WWW.FERM.COM ©2019 FERM

1910-02

Vraag stellen over de Ferm JSM1025P

Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Nog geen vragen over de Ferm JSM1025P

Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.

Origineel document

Ferm JSM1025P handleiding-pdf

128 pagina's·4.6 MB·Zaagmachine·PDF
Klik op een bovenstaande pagina om deze hier te openen
Pagina 1 / …
100%
Pagina's laden…