

Q u i c k S t a r t G u i d e
it types!



Español
Italiano Português
Русский
for Windows®

This Quick Start Guide provides general guidelines for installing and using IRISNotesTM
Express 2. For detailed instructions on IRISNotesTM' full range of functionalities, please refer to the user guide and help file provided with the installation CD-ROM.
IRISNotesTM is a pen and mobile note taker that can capture handwritten notes and drawings, as well as edit, save and export them. Your handwritten notes can be instantly converted into editable text in a wide range of languages.
TM installation CD-ROM This CD-ROM contains the Easy Note Taker Application and MyScript
! Do not dismantle the pen.
This may damage it.
Unscrew the battery compartment cover and
insert 2 batteries (GPSR41 or GP392) with positive polarity
Slide an ink refill into the pen tip (standard M21 refill of 67.0mm long X 2.35mm) and press it gently until it is correctly lodged.

To replace the ink refill (the pen cap serves as an ink refill extractor): - Firmly press the top of the cap against the tip of the pen and pull the used ink refill out. - Slide the new ink refill in.

ON/OFF button Press for 5 seconds to turn on

Charge the receiver unit at least 30 minutes before using the product (full charge time is 3.5 hours): plug the USB cable to the unit and connect it to your USB port.
The LCD screen displays the following status indications:
The receiver unit · LCD screen

Position the receiver unit at the top center of your A4 paper sheets. Press the power button for about 5 seconds to power it on.
Fix the receiver onto the edge of the
Use the paper clip at the back of the receiver unit
Hold the pen firmly and write normally. Try to avoid line skew. When you are done writing a note, press the power button once. This saves to the note to the receiver memory. The device is now ready to start a new note. You can store up to 100 notes of A4 size.
! Hold the pen properly: ! Do not place your hand between the pen and the receiver unit ! Keep your fingers away from the pen tip crystal cone
In order to transfer your notes to your Windows PC or Mac OS computer you must first install the corresponding software.
TM CD-ROM in your CD-ROM drive and follow the on-screen instructions. When the installation is complete, click on Finish. The Easy Note Taker icon appears on your desktop.
TM CD-ROM with Windows Explorer. Open the Notes 2.2 Lite folder, then double-click on setup.exe to start the installation. When the installation is complete, click on Finish, then remove the CD-ROM from the CD-ROM drive.
Writing notes · paper, face up

- Connect the receiver unit to your PC (using the USB cable) and launch Easy Note Taker. - In the Note Manager, click on Upload on the main toolbar. All the notes get uploaded from the receiver to your PC and can be viewed on screen.
You can select other preferences for the upload. Select Preferences from the Configuration menu and get to the Mobile tab:
- The uploaded notes are available in the Mobile Notes folder. They can further be edited using the Note Editor, sorted, saved, exported and e-mailed as JPEG files.

- In the Note Manager, click on Convert to text
on the main toolbar. - Choose the conversion settings in MyScript Notes Lite. The conversion is performed instantly. - The resulting text can further be sent to other applications or sent by e-mail.

Uploading notes · Managing notes · Converting notes

TM CD-ROM in your CD-ROM drive, then double-click the CD-ROM icon on the Desktop. 2. Double-click NoteTaker.pkg, and then follow the on-screen instructions.
Set the upload preferences
When you use your digital pen to write text, everything you write is saved as a series of TIFF (Tagged Image File Format) images in the Mobile NoteTaker memory. From there, they must be uploaded to your Mac’s hard drive.
But before you do, first determine the upload settings in the NoteTaker Preference Tool: - Click on the NoteTaker Preferences icon. The NoteTaker Preferences window opens:

- Click the browse icon (...) to determine where on your Mac you want to save the notes. - Select the option Clear device’s memory if you want to erase the notes from memory each time you transfer them. - Then click Save to save the settings.
Power on the receiver unit and connect it to your Mac. The notes are uploaded automatically. They are saved in TIFF format. Double click on the desired TIFF file, in order to view the note.


Uploading notes

Using the pen in mouse mode (PC and Mac) You can also use the IRISNotes
TM pen as mouse. To switch to mouse mode:
PC - Connect the receiver to your PC. - Hold the pen right in front of the receiver, then press the power button once.
Mac - Connect the receiver to your Mac. - IRISNotes
TM switches automatically to mouse mode.
- Tap the pen on a piece of paper. The cursor is now being controlled by the pen. - Hover the pen above a page to move the cursor. - To click an object, point with the cursor to the object, then tap with the pen to click it. - To right-click an object, point to it, then tap and hold the pen for an instant.
TM pen to write directly in Microsoft Office 2007 applications and higher. This also works on Mac OS 10.5 in iWork® ’08 applications and higher. See www.irislink.com/support/userguides for more information.
For detailed instructions on IRISNotesTM, refer to: - Easy Note Taker manual: available from Windows’ Start menu. - MyScript Notes Lite help file: available from the software Help menu.
Should you experience issues when using your IRISNotesTM, consult the Frequently Asked question on our website www.irislink.com/support/faq or contact Technical Support at www.irislink.com/support
Pagina's waarnaar wordt verwezen in deze handleiding — fabrikant, ondersteuning en downloads.
Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.
Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.