
PORTUGUÊS
KD-X352BT / KD-X351BT
DIGITAL MEDIA RECEIVER INSTRUCTION MANUAL
RECEPTOR DE MEDIOS DIGITALES MANUAL DE INSTRUCCIONES
DIGITALE MEDIAONTVANGER GEBRUIKSAANWIJZING
RECEPTOR MÉDIA DIGITAL MANUAL DE INSTRUÇÕES
B5A-2133-00 [E]


For Israel

English Hereby, JVCKENWOOD declares that the radio equipment “KD-X352BT/KD-X351BT” is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.jvc.net/cs/car/eudoc/
Español Por la presente, JVCKENWOOD declara que el equipo de radio “KD-X352BT/KD-X351BT” cumple la Directiva 2014/53/EU. El texto completo de la declaración de conformidad con la UE está disponible en la siguiente dirección de internet: http://www.jvc.net/cs/car/eudoc/
Declaration of Conformity with regard to the RE Directive 2014/53/EU Declaration of Conformity with regard to the RoHS Directive 2011/65/EU Manufacturer: JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN EU Representative: JVCKENWOOD Deutschland GmbH Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, GERMANY
Português Deste modo, a JVCKENWOOD declara que o equipamento de rádio “KD-X352BT/KD-X351BT” está em conformidade com a Diretiva 2014/53/UE. O texto integral da declaração de conformidade da UE está disponível no seguinte endereço de internet: http://www.jvc.net/cs/car/eudoc/
Français Par la présente, JVCKENWOOD déclare que l’équipement radio « KD-X352BT/KD-X351BT » est conforme à la directive 2014/53/UE. L’intégralité de la déclaration de conformité UE est disponible à l’adresse Internet suivante : http://www.jvc.net/cs/car/eudoc/
Declaración de conformidad con respecto a la Directiva RE 2014/53/EU Declaración de conformidad con respecto a la Directiva RoHS 2011/65/EU Fabricante: JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN Representante en la UE: JVCKENWOOD Deutschland GmbH Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, GERMANY
Polska Niniejszym, JVCKENWOOD deklaruje, że sprzęt radiowy “KD-X352BT/KD-X351BT” jest zgodny z dyrektywą 2014/53/UE. Pełny tekst deklaracji zgodności EU jest dostępny pod adresem: http://www.jvc.net/cs/car/eudoc/
Deutsch Hiermit erklärt JVCKENWOOD, dass das Funkgerät “KD-X352BT/KD-X351BT” der Richtlinie 2014/53/EU entspricht. Der volle Text der EU-Konformitätserklärung steht unter der folgenden Internetadresse zur Verfügung: http://www.jvc.net/cs/car/eudoc/
Conformiteitsverklaring met betrekking tot de RE-richtlijn van de Europese Unie (2014/53/EU) Conformiteitsverklaring met betrekking tot de RoHS richtlijn van de Europese Unie (2011/65/EU) Fabrikant: JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN EU-vertegenwoordiger: JVCKENWOOD Deutschland GmbH Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, GERMANY
Český Společnost JVCKENWOOD tímto prohlašuje, že rádiové zařízení “KD-X352BT/KD-X351BT” splňuje podmínky směrnice 2014/53/EU. Plný text EU prohlášení o shodě je dostupný na následující internetové adrese: http://www.jvc.net/cs/car/eudoc/
Nederlands Hierbij verklaart JVCKENWOOD dat de radioapparatuur “KD-X352BT/KD-X351BT” in overeenstemming is met Richtlijn 2014/53/EU. De volledige tekst van de EU-verklaring van overeenstemming is te vinden op het volgende internetadres: http://www.jvc.net/cs/car/eudoc/
Magyar JVCKENWOOD ezennel kijelenti, hogy a „KD-X352BT/KD-X351BT“ rádióberendezés megfelel a 2014/53/EU irányelvnek. Az EU konformitási nyilatkozat teljes szövege az alábbi weboldalon érhető el: http://www.jvc.net/cs/car/eudoc/
Italiano Con la presente, JVCKENWOOD dichiara che l΄apparecchio radio “KD-X352BT/KD-X351BT” è conforme alla Direttiva 2014/53/UE. Il testo integrale della dichiarazione di conformità UE è disponibile al seguente indirizzo internet: http://www.jvc.net/cs/car/eudoc/
Declaração de conformidade relativa à Directiva RE 2014/53/EU Declaração de conformidade relativa à Directiva RoHS 2011/65/EU Fabricante: JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN Representante na UE: JVCKENWOOD Deutschland GmbH Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, GERMANY



Reset the unit within 5 seconds after detaching the faceplate.
Turn on the power Press . • Press and hold to turn off the power.
Press the volume knob to mute the sound or pause playback. • Press again to cancel. The volume level returns to the previous level before muting or pause.
Change the display information Press repeatedly. ( 25)

1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press to exit.
To return to the previous setting item, press .
When you turn on the power for the first time (or [FACTORY RESET] is set to [YES]), the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB” 1 Press the volume knob. [YES] is selected for the initial setup. 2 Press the volume knob again. “DEMO OFF” appears.
KEY BEEP (Not applicable when 3-way crossover is selected.) ON: Activates the keypress tone. ; OFF: Deactivates.
1 Press and hold . 2 Turn the volume knob to select [CLOCK], then press the knob.
To adjust the clock 3 Turn the volume knob to select [CLOCK ADJUST], then press the knob. 4 Turn the volume knob to make the settings, then press the knob. Hour Minute 5 Turn the volume knob to select [CLOCK FORMAT], then press the knob. 6 Turn the volume knob to select [12H] or [24H], then press the knob.
UPDATE SYSTEM
F/W UP xxxx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated). For details on how to update the firmware, visit
To set the date 7 Turn the volume knob to select [DATE SET], then press the knob. 8 Turn the volume knob to make the settings, then press the knob. Day Month Year 9 Press to exit.
FACTORY RESET YES: Resets the settings to default (except the stored station). ; NO: Cancels.
* Not displayed when the corresponding source is selected.
To return to the previous setting item, press .


TIME SYNC ON: The clock time is automatically set using the Clock Time (CT) data in FM Radio Data System signal. ; OFF: Cancels.
ON: The clock time is shown on the display even when the unit is turned off. ; OFF: Cancels.
“STEREO” lights up when receiving an FM stereo broadcast with sufficient signal strength.
Select the display language for menu and music information if applicable. By default, ENGLISH is selected. РУССКИЙ
ESPANOL
1 Press repeatedly to select FM or AM. 2 Press to search for a station automatically. (or) Press and hold until “M” flashes, then press repeatedly to search for a station manually.
You can store up to 18 stations for FM and 6 stations for AM.
While listening to a station Press and hold one of the number buttons (1 to 6). (or) 1 Press and hold the volume knob until “PRESET MODE” flashes. 2 Turn the volume knob to select a preset number, then press the knob. The preset number flashes and “MEMORY” appears.
Press one of the number buttons (1 to 6). (or) 1 Press . 2 Turn the volume knob to select a preset number, then press the knob.

IF BAND AUTO: Increases the tuner selectivity to reduce interference noises from adjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to interference noises from adjacent FM stations, but sound quality will not be degraded and the stereo effect will remain.
1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. 4 Press to exit.
MONO SET ON: Improves the FM reception, but the stereo effect will be lost. ; OFF: Cancels.
NEWS SET*2 ON: The unit will temporarily switch to News Programme if available. ; OFF: Cancels.
To return to the previous setting item, press .
REGIONAL*2 ON: Switches to another station only in the specific region using the “AF” control. ; OFF: Cancels.
AF SET*2 ON: Automatically searches for another station broadcasting the same program in the same Radio Data System network with better reception when the current reception is poor. ; OFF: Cancels.
TI ON: Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up) while listening to all sources except in AM. ; OFF: Cancels.
PTY SEARCH*2 Select a PTY code (see below).
If there is a station broadcasting a program of the same PTY code as you have selected, that station is tuned in.
*1 Selectable only when [ONCE] or [WEEKLY] is selected in step 1. *2 Only for FM source.
SSM SSM 01–06/SSM 07–12/SSM 13–18: Automatically presets up to 18 stations for FM. “SSM” stops flashing when the first 6 stations are stored. Select SSM 07–12/SSM 13–18 to store the following 12 stations.
PTY code NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music), DOCUMENT
LOCAL SEEK ON: Searches only FM stations with good reception. ; OFF: Cancels. • Settings made are applicable only to the selected source/station. Once you change the source/station, you need to make the settings again.

The source changes automatically and playback starts.
To On the faceplate
Reverse/Fast-forward*3 Press and hold .
USB 2.0 cable*1 (commercially available)
Select a file Press .
Select a folder*4 Press .
Repeat play*5 Press repeatedly. TRACK REPEAT/FOLDER REPEAT/ALL REPEAT: MP3/WMA/AAC/WAV/
FLAC file ONE REPEAT/ALL REPEAT/REPEAT OFF: iPod or ANDROID
Accessory of the iPod/iPhone*1
Random play*5 Press repeatedly. FOLDER RANDOM/ALL RANDOM/RANDOM OFF: MP3/WMA/AAC/WAV/
FLAC file SONG RANDOM/ALL RANDOM/RANDOM OFF: iPod or ANDROID
*1 Do not leave the cable inside the car when not using. *2 When connecting an Android device, “Press [VIEW] to install JVC MUSIC PLAY APP” is shown. Follow the instructions to install the application. You can also install the latest version of JVC MUSIC PLAY application on your Android device before connecting. For more information, visit
USB cable*1 (commercially available)
USB input terminal


For iPod/ANDROID, applicable only when [HEAD MODE]/[AUTO MODE] is selected. 1 Press . 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob.
While in iPod USB source, press repeatedly. HEAD MODE: Control iPod from this unit. IPHONE MODE: Control iPod using the iPod itself. However, you can still
play/pause or file skip from this unit.
While in ANDROID source, press repeatedly. AUTO MODE: Control Android device from this unit via JVC MUSIC PLAY application installed in the Android device. AUDIO MODE: Control Android device using the Android device itself via
Quick search (applicable only for USB and ANDROID source) If you have many files, you can search through them quickly.
other media player applications installed in the Android device. However, you can still play/pause or file skip from this unit.
Turn the volume knob quickly to browse through the list quickly.
Alphabet search (applicable only for iPod USB and ANDROID source) You can search for a file according to the first character.
For iPod USB source Press or turn the volume knob quickly to select the desired character (A to Z, 0 to 9, OTHERS). • Select “OTHERS” if the first character is other than A to Z, 0 to 9.
While in USB source, press repeatedly.
For ANDROID source 1 Press to enter character search. 2 Turn the volume knob to select the desired character. ^A^: Upper case letters (A to Z) _A_: Lower case letters (a to z) -0-: Numbers (0 to 9) -OTHERS-: Character other than A to Z, 0 to 9 3 Press the volume knob to start searching.
JVC Remote application is designed to control the JVC car receiver’s operations from the iPhone/iPod (via USB input terminal).
Preparation: Install the latest version of JVC Remote application on your device before connecting. For more information, visit
You can make the settings in the same way as connection via Bluetooth. ( 16)


Preparation: Install the latest version of the Spotify application on your device (iPhone/ iPod touch), then create an account and log in to Spotify. • Select [ON] for [SPOTIFY SRC] in [SOURCE SELECT]. ( 4)
Repeat play *3 Press repeatedly. ALL REPEAT, ONE REPEAT *1, REPEAT OFF
1 Open the Spotify application on your device. 2 Connect your device to the USB input terminal.
*1 Available for premium account users only. *2 This feature is available for tracks in Radio only. If thumbs down is selected, the current track is skipped. *3 Available for tracks in Playlists only.

While listening to the Radio on Spotify...
3 Press repeatedly to select SPOTIFY. Broadcast starts automatically * Do not leave the cable inside the car when not using.
Press and hold the volume knob. “SAVED” appears and the information is stored to “Your Music” or “Your Library” on your Spotify account.
To unsave, repeat the same procedure. “REMOVED” appears and the information is removed from “Your Music” or “Your Library” on your Spotify account.

Skip a track Press S*1 / T.
1 Press . 2 Turn the volume knob to select a list type, then press the knob. The list types displayed differ depending on the information sent
from Spotify. 3 Turn the volume knob to select the desired song or station, then press the knob. You can browse through the list quickly by turning the volume knob
quickly.
To cancel, press and hold .

Pair and connect a Bluetooth device for the first time
Supported Bluetooth profiles – Hands-Free Profile (HFP) – Advanced Audio Distribution Profile (A2DP) – Audio/Video Remote Control Profile (AVRCP) – Serial Port Profile (SPP) – Phonebook Access Profile (PBAP)
Supported Bluetooth codecs – Sub Band Codec (SBC) – Advanced Audio Coding (AAC)

Bluetooth device. You can change to a desired PIN code before pairing. ( 14) • If only “PAIRING” appears, operate the Bluetooth device to confirm pairing.
“PAIRING COMPLETED” appears when pairing is completed and “ ” will light up when the Bluetooth connection is established.
Adjust the microphone angle Secure using cord clamps (not supplied) if necessary.


When you connect the iPhone/iPod touch/ Android device to the USB input terminal, pairing request (via Bluetooth) is automatically activated.
Press the volume knob to pair once you have confirmed the device name.
Automatic pairing request is activated only if: – Bluetooth function of the connected device is
turned on. – [AUTO PAIRING] is set to [ON]. ( 14) – JVC MUSIC PLAY application is installed on
the Android device ( 7) and [AUTO MODE] is selected ( 8).
The following operations may differ or not available depending on the connected phone.

Reject a call Press and hold or the volume knob.
End a call Press and hold or the volume knob.
Answer another incoming call and hold the current call
Reject another incoming call Press and hold or the volume knob.


MIC GAIN LEVEL –10 to LEVEL +10 (LEVEL –04): The sensitivity of the microphone increases as the number increased.
NR LEVEL LEVEL –05 to LEVEL+05 (LEVEL 00): Adjust the noise reduction level until the least noise is being heard during a phone conversation.
ECHO CANCEL LEVEL –05 to LEVEL +05 (LEVEL 00): Adjust the echo cancellation delay time until the least echo is being heard during a phone conversation.
Adjust the phone volume*1 [00] to [35] (Default: [15])
Switch between hands-free and private talk modes*2
Make the settings for receiving a call 1 Press to enter Bluetooth mode. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated.
*1 This adjustment will not affect the volume of the other sources. *2 Operations may vary according to the connected Bluetooth device.
To return to the previous setting item, press .
While talking on the phone 1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press to exit.

AUTO ANSWER 01 SEC to 30 SEC: The unit answers incoming call automatically in the selected time (in seconds). ; OFF: Cancels.
RING ILLUMI BLINK 01 to BLINK 05 (BLINK 02): Selects the blinking pattern for the buttons as notification when there is an incoming call. ; OFF: Cancels.
To return to the previous setting item, press .

Make a call using voice recognition 1 Press and hold to activate the connected phone. 2 Speak the name of the contact you want to call or the voice command to control the phone functions.
You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature. 1 Press to enter Bluetooth mode. “(First device name)” appears. • If two Bluetooth phones are connected, press again to switch to another phone. “(Second device name)” appears. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item.
To return to the previous setting item, press .
You can store up to 6 contacts into the number buttons (1 to 6). 1 Press to enter Bluetooth mode. 2 Turn the volume knob to select [RECENT CALL], [PHONEBOOK] or [DIAL NUMBER], then press the knob. 3 Turn the volume knob to select a contact or enter a phone number. If a contact is selected, press the volume knob to show
the phone number. 4 Press and hold one of the number buttons (1 to 6). “MEMORY P(selected preset number)” appears when
the contact is stored.
To erase a contact from the preset memory, select [DIAL NUMBER] in step 2 and store a blank number.
DIAL NUMBER 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +). 2 Press to move the entry position. Repeat steps 1 and 2 until you finish entering the phone number. 3 Press the volume knob to call.
Make a call from memory 1 Press to enter Bluetooth mode. 2 Press one of the number buttons (1 to 6). 3 Press the volume knob to call. “NO PRESET” appears if there is no contact stored.
VOICE Speak the name of the contact you want to call or the voice command to control the phone functions. ( Make a call using voice recognition)

Bluetooth compatibility check mode
1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. 4 Press to exit.
You can check the connectivity of the supported profile between the Bluetooth device and the unit. • Make sure there is no Bluetooth device paired. 1 Press and hold . “BLUETOOTH” “CHECK MODE” appears. “SEARCH NOW USING PHONE” “PIN IS 0000” scrolls on the display. 2 Search and select “KD-X3 BT”on the Bluetooth device within 3 minutes. 3 Perform (A), (B) or (C) depending on what appears on the display. (A) “PAIRING” “XXXXXX” (6-digit passkey):
To return to the previous setting item, press .
PHONE SELECT* Selects the phone or audio device to connect or disconnect. “ ” appears in front of the device name when connected. “ ” appears in front of the current playback audio device. AUDIO SELECT*
Ensure that the same passkey appears on the unit and Bluetooth device, then operate the Bluetooth device to confirm the passkey. (B) “PAIRING” “PIN IS 0000”: Enter “0000” on
DEVICE DELETE 1 Turn the volume knob to select a device to delete, then press the knob. 2 Turn the volume knob to select [YES] or [NO], then press the knob.
Changes the PIN code (up to 6 digits). 1 Turn the volume knob to select a number. 2 Press to move the entry position. Repeat steps 1 and 2 until you finish entering the PIN code. 3 Press the volume knob to confirm.
confirm pairing.
After pairing is successful, “PAIRING OK” “[Device Name]” appears and Bluetooth compatibility check starts. If “CONNECT NOW USING PHONE” appears, operate the Bluetooth device to allow phonebook access to continue. “TESTING” flashes on the display.
RECONNECT ON: The unit automatically reconnect when the last connected Bluetooth device is within range. ; OFF: Cancels.
AUTO PAIRING ON: The unit automatically pair supported Bluetooth device (iPhone/iPod touch/Android device) when it is connected through USB input terminal. Depending on the operating system of the connected device, this function may not work. ; OFF: Cancels.
INITIALIZE YES: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ; NO: Cancels.
INFORMATION MY BT NAME: Displays the unit name (“KD-X3 BT”). ; MY ADDRESS: Shows address of this unit.
* You can only connect a maximum of two Bluetooth phones and one Bluetooth audio device at any time.

The connectivity result flashes on the display. “PAIRING OK” and/or “HANDS-FREE OK”*1 and/ or “AUD.STREAM OK”*2 and/or “PBAP OK”*3 : Compatible *1 Compatible with Hands-Free Profile (HFP) *2 Compatible with Advanced Audio Distribution Profile (A2DP) *3 Compatible with Phonebook Access profile (PBAP)
While in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices.

After 30 seconds, “PAIRING DELETED” appears to indicate that pairing has been deleted, and the unit exits check mode.
1 Press repeatedly to select BT AUDIO. • Pressing enters BT AUDIO directly. 2 Operate the Bluetooth audio player to start playback.

Repeat play Press repeatedly. TRACK REPEAT, ALL REPEAT, REPEAT OFF
Random play Press repeatedly. GROUP RANDOM, ALL RANDOM, RANDOM OFF
Select a file from a folder/list Refer to “Select a file from a folder/list” on page 8.
* Pressing the “Play” key on the connected device itself also causes switching of sound output from the device.
Operations and display indications may differ according to their availability on the connected device.

STATUS Shows the status of the selected device. IOS CONNECTED: You are able to use the application using the iPhone/ iPod connected via Bluetooth or USB input terminal. IOS NOT CONNECTED: No IOS device is connected to use the application. ANDROID CONNECTED: You are able to use the application using the Android smartphone connected via Bluetooth. ANDROID NOT CONNECTED: No Android device is connected to use the application.
JVC Remote application is designed to control the JVC car receiver’s operations from the iPhone/iPod (via Bluetooth or via USB input terminal) or Android smartphone (via Bluetooth).
Preparation: Install the latest version of JVC Remote application on your device before connecting. For more information, visit
1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press to exit.
You can listen to the songs on the iPhone/iPod via Bluetooth on this unit.
To return to the previous setting item, press .
to select iPod BT if the device is still connected via Bluetooth.
SELECT Select the device (IOS or ANDROID) to use the application.
IOS YES: Selects iPhone/iPod to use the application via Bluetooth or connected via USB input terminal. ; NO: Cancels. If IOS is selected, select iPod BT source (or iPod USB if your iPhone/iPod is connected via USB input terminal) to activate the application. • The connectivity of the application will be interrupted or disconnected if: – You change from iPod BT source to any playback source connected via
the USB input terminal. – You change from iPod USB source to iPod BT source.
ANDROID YES: Selects Android smartphone to use the application via Bluetooth. ; NO: Cancels.
ANDROID LIST* Selects the Android smartphone to use from the list.
* Displayed only when [ANDROID] of [SELECT] is set to [YES].

Use a portable audio player
1 Connect a portable audio player (commercially available).
You can listen to Spotify on the iPhone/iPod touch/Android device via Bluetooth on this unit. • Make sure the USB input terminal is not connected to any device.
3.5 mm stereo mini plug with “L” shaped connector (commercially available)

Preparation: Select [ON] for [SPOTIFY SRC] in [SOURCE SELECT]. ( 4) 1 Open the Spotify application on your device. 2 Connect your device via Bluetooth connection. ( 10) 3 Press repeatedly to select SPOTIFY (for iPhone/iPod) or SPOTIFY BT (for Android device). The source switches and broadcast starts automatically.
2 Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. ( 4) 3 Press repeatedly to select AUX. 4 Turn on the portable audio player and start playback.
Use a 3-core plug head stereo mini plug for optimum audio output.
Portable audio player

LEVEL –09 to LEVEL +09 (LEVEL 00): Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.)
1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. 4 Press to exit.
ON: Turns on the extended bass. ; OFF: Cancels.
100HZ/160HZ/250HZ/400HZ/630HZ/1KHZ/1.6KHZ/2.5KHZ/4KHZ/6.3KHZ/10KHZ/ 16kHZ
LEVEL –09 to LEVEL +09 (LEVEL 00): Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.)
To return to the previous setting item, press .
Q FACTOR 1.35/1.50/2.00: Adjust the quality factor.
BASS BOOST LEVEL +01 to LEVEL +05: Selects your preferred bass boost level. ; OFF: Cancels.
PRESET EQ Select a preset equalizer suitable to the music genre. • Select [USER] to use the settings made in [EASY EQ] or [PRO EQ]. FLAT/DRVN 3/DRVN 2/DRVN 1/HARD ROCK/HIP HOP/JAZZ/POP/ R&B/USER/CLASSICAL Drive equalizer (DRVN 3/DRVN 2/DRVN 1) boosts specific frequencies in the audio signal to reduce the noise heard from outside the car or running noise of the tyres.
LOUDNESS LEVEL 01/LEVEL 02: Boosts low or high frequencies to produce a well- balanced sound at low volume. ; OFF: Cancels
SUB.W LEVEL*1 SPK-OUT*2 (Not applicable when 3-way crossover is selected.) SUB.W 00 to SUB.W +06 (SUB.W +03): Adjusts the output level of the subwoofer connected via speaker lead. ( 31)
PRE-OUT*3 SUB.W –50 to SUB.W +10 (SUB.W 00): Adjusts the output level of the subwoofer connected to the lineout terminals (REAR/SW) through an external amplifier. ( 31)
ON: Turns on the subwoofer output. ; OFF: Cancels.
*1, *2, *3: ( 19)

FADER (Not applicable when 3-way crossover is selected.) POSITION R15 to POSITION F15 (POSITION 00): Adjusts the front and rear speaker output balance.
SPACE ENHANCE (Not applicable for TUNER source.) SMALL/MEDIUM/LARGE: Virtually enhances the sound space. ; OFF: Cancels.
BALANCE*4 POSITION L15 to POSITION R15 (POSITION 00): Adjusts the left and right speaker output balance.
SND RESPONSE LEVEL1/LEVEL2/LEVEL3: Virtually makes the sound more realistic. ; OFF: Cancels.
VOLUME ADJUST LEVEL –15 to LEVEL +06 (LEVEL 00): Preset the initial volume level of each source (compared to the FM volume level). Before adjustment, select the source you want to adjust.
SOUND LIFT LOW/MIDDLE/HIGH: Virtually adjust the sound position heard from the speakers. ; OFF: Cancels.
AMP GAIN LOW POWER: Limits the maximum volume level to 25. (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speakers.) ; HIGH POWER: The maximum volume level is 35.
VOL LINK EQ ON: Boosts the frequency to reduce the noise heard from outside the car or running noise of the tyres. ; OFF: Cancels.
K2 TECHNOLOGY (Not applicable for TUNER source and AUX source.) ON: Improve the sound quality of compressed music. ; OFF: Cancels.
SPK/PRE OUT (Not applicable when 3-way crossover is selected.) Depending on the speaker connection method, select the appropriate setting to get the desired output. ( 20, Speaker output settings)
*1 Displayed only when [SUBWOOFER SET] is set to [ON]. ( 18) *2 For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W]. ( 20) *3 For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or [SUB.W/SUB.W]. ( 20) *4 This adjustment will not affect the subwoofer output.
SPEAKER SIZE Depending on the crossover type you have selected ( [X ' OVER TYPE]), 2-way crossover or 3-way crossover setting items will be shown. ( 20, Crossover settings) By default, 2-way crossover type is selected. X ' OVER
For settings, 22, Digital Time Alignment settings. CAR SETTINGS
X ' OVER TYPE Caution: Adjust the volume before changing the [X ' OVER TYPE] to avoid the sudden increase or decrease of the output level.
2-WAY (Displayed only when [3-WAY] is selected) YES: Selects two way crossover type. ; NO: Cancels.
3-WAY (Displayed only when [2-WAY] is selected) YES: Selects three way crossover type. ; NO: Cancels.

Crossover settings
(Applicable only if [X ' OVER TYPE ] is set to [2-WAY]) ( 19)
Below are the available setting items for 2-way crossover and 3-way crossover.
Select the output setting for the speakers [SPK/PRE OUT], based on the speaker connection method.

For connections without using an external amplifier. However, with this settings you can also enjoy the subwoofer output. ( 31)

If [SUB.W/SUB.W] is selected: – [120HZ] is selected in [SUBWOOFER LPF] and [THROUGH] is not available.
( 21) – [POSITION R02] is selected in [FADER] and selectable range is
[POSITION R15] to [POSITION 00]. ( 19)

3-way crossover setting items
SPEAKER SIZE
SPEAKER SIZE
FRONT SIZE 8CM/10CM/12CM/13CM/16CM/17CM/18CM/ 4×6/5×7/6×8/6×9/7×10 TWEETER SMALL/MIDDLE/LARGE/NONE (not connected) REAR*1 8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/ 6×9/7×10/NONE (not connected) SUBWOOFER*2*3 16CM/20CM/25CM/30CM/38CM OVER/NONE (not connected) X ' OVER
TWEETER SMALL/MIDDLE/LARGE MID RANGE 8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/6×9 WOOFER*3 16CM/20CM/25CM/30CM/38CM OVER/NONE (not connected) X ' OVER
TWEETER HPF FRQ 1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/ 10KHZ/12.5KHZ SLOPE –06DB/–12DB PHASE REVERSE (180°)/NORMAL (0°) GAIN –08DB to 00DB MID RANGE HPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/ 120HZ/150HZ/180HZ/220HZ/250HZ/THROUGH HPF SLOPE –06DB/–12DB LPF FRQ 1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/ 10KHZ/12.5KHZ/THROUGH LPF SLOPE –06DB/–12DB PHASE REVERSE (180°)/NORMAL (0°) GAIN –08DB to 00DB WOOFER*3 LPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/ 120HZ/150HZ/180HZ/220HZ/250HZ/THROUGH SLOPE –06DB/–12DB PHASE REVERSE (180°)/NORMAL (0°) GAIN –08DB to 00DB
TWEETER FRQ 1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/ 8KHZ/10KHZ/12.5KHZ GAIN LEFT –08DB to 00DB GAIN RIGHT –08DB to 00DB FRONT HPF F-HPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/ 100HZ/120HZ/150HZ/180HZ/220HZ/250HZ/ THROUGH F-HPF SLOPE –06DB/–12DB/–18DB/–24DB F-HPF GAIN –08DB to 00DB REAR HPF*1 R-HPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/ 100HZ/120HZ/150HZ/180HZ/220HZ/250HZ/ THROUGH R-HPF SLOPE –06DB/–12DB/–18DB/–24DB R-HPF GAIN –08DB to 00DB SUBWOOFER LPF*2*3
SW LPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/ 100HZ/120HZ/150HZ/180HZ/220HZ/250HZ/ THROUGH SW LPF SLOPE –06DB/–12DB/–18DB/–24DB SW LPF PHASE REVERSE (180°)/ NORMAL (0°) SW LPF GAIN –08DB to 00DB
*1 Displayed only when [SPK/PRE OUT] is set to [REAR/REAR] or [REAR/SUB.W]. ( 20) *2 Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or [SUB.W/SUB.W]. ( 20) *3 Displayed only when [SUBWOOFER SET] is set to [ON]. ( 18)

Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]
If you specify the distance from the center of the currently set listening position to every speaker, the delay time will be automatically computed and set. 1 Determine the center of the currently set listening position as the reference point. 2 Measure the distances from the reference point to the speakers. 3 Calculate the differences between the distance of the furthest speaker (rear speaker) and other speakers. 4 Set the [DISTANCE] calculated in step 3 for individual speakers. 5 Adjust [GAIN] for individual speakers. Example: When [FRONT ALL] is selected as the listening position
Digital Time Alignment sets the delay time of the speaker output to create a more suitable environment for your vehicle. • For more information, Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS].
POSITION Selects your listening position (reference point). ALL: Not compensating ; FRONT RIGHT: Front right seat ; FRONT LEFT: Front left seat ; FRONT ALL: Front seat • [FRONT ALL] is displayed only when [X ' OVER TYPE] is set to [2-WAY]. ( 19)
DISTANCE *1 0CM to 610CM: Fine adjust the distance to compensate.
GAIN*1 –8DB to 0DB: Fine adjust the output volume of the selected speaker.
DTA RESET YES: Resets the settings ([DISTANCE] and [GAIN]) of the selected [POSITION] to default. ; NO: Cancels.
*1 Before making an adjustment, select the speaker: When 2-way crossover is selected: FRONT LEFT/FRONT RIGHT/REAR LEFT/REAR RIGHT/SUBWOOFER: – [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] is selectable only if a setting other than
CAR SETTINGS Identify your car type and rear speaker location in order to make the adjustment for [DTA SETTINGS].
CAR TYPE COMPACT/FULL SIZE CAR/WAGON/MINIVAN/SUV/ MINIVAN(LONG): Selects the type of vehicle. ; OFF: Not compensating.
[NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE]. ( 21) When 3-way crossover is selected: TWEETER LEFT/TWEETER RIGHT/MID LEFT/MID RIGHT/WOOFER: – [WOOFER] is selectable only if a setting other than [NONE] is selected for [WOOFER] of
[SPEAKER SIZE]. ( 21) *2 Displayed only when [X ' OVER TYPE ] is set to [2-WAY] ( 19) and if a setting other than [NONE] is selected for [REAR] of [SPEAKER SIZE]. ( 21)


BRIGHTNESS Set the brightness for day and night separately. 1 DAY/NIGHT: Select day or night. 2 Select a zone. (See the illustration.) 3 LEVEL 00 to LEVEL 31: Set the brightness level.
TEXT SCROLL*2 SCROLL ONCE: Scrolls the display information once. ; SCROLL AUTO: Repeats scrolling at 5-second intervals. ; SCROLL OFF: Cancels.
1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. 4 Press to exit.
*1 The illumination control wire connection is required. ( 31) *2 Some characters or symbols will not be shown correctly (or will be blanked).
To return to the previous setting item, press .

DIMMER Dim the illumination. OFF: Dimmer is turned off. Brightness changes to [DAY] setting. ON: Dimmer is turned on. Brightness changes to [NIGHT] setting. ( [BRIGHTNESS]) DIMMER TIME: Set the dimmer on and off time. 1 Turn the volume knob to adjust the [ON] time, then press the knob. 2 Turn the volume knob to adjust the [OFF] time, then press the knob. (Default: [ON]: 18:00; [OFF]: 6:00) DIMMER AUTO: Dimmer turns on and off automatically when you turn off or on the car headlights.*1

Maintenance Cleaning the unit Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector Detach the faceplate and clean the connector gently with a cotton swab, being careful not to damage the connector.
Connector (on the reverse side of the faceplate)
More information For: – Latest firmware updates and latest compatible item list – JVC original application – Any other latest information Visit


BT AUDIO Song title/Artist Album name/Artist Playing time Clock
Song title/Artist with music synchronisation* (back to the beginning)
AUX AUX Clock AUX with music synchronisation* (back to the beginning)
Change the display information Each time you press , the display information changes. • If the information is unavailable or not recorded, “NO TEXT”, “NO NAME”, or other information (eg. station name) appears or display will be blank.
* The brightness of the button illumination changes and synchronises with the music.
Source name Display information
FM or AM Frequency Clock Frequency with music synchronisation* (back to the beginning)
(For FM Radio Data System stations only) Station name (PS)/Program type (PTY) Radio text Radio text+
Available characters Display indications
Radio text+ title/Radio text+ artist Frequency Clock Station name (PS)/Program type (PTY) with music synchronisation*
(back to the beginning)
USB (For MP3/WMA/AAC/WAV/FLAC files) Song title/Artist Album name/Artist Folder name File name Playing time Clock Song title/Artist with music synchronisation* (back to the beginning)
iPod USB/iPod BT or ANDROID
When [HEAD MODE]/[AUTO MODE] is selected ( 8): Song title/Artist Album name/Artist Playing time Clock Song title/Artist with music synchronisation* (back to the beginning)
SPOTIFY/SPOTIFY BT Context title Song title Artist name Album name Playing Time Clock Context title with music synchronisation* (back to the beginning)
Available Cyrillic letters

The USB port is drawing more power than the design
limit. Turn the power off and unplug the USB device. Then, turn on the power and reattach the USB device. If this does not solve the problem, turn the power off and
“MISWIRING CHECK WIRING THEN PWR ON” appears.
Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the power on again.
on (or reset the unit) before replacing with another USB device.
“PROTECTING SEND SERVICE” appears.
Send the unit to the nearest service center.
The iPod/iPhone does not turn on or does not work
Source cannot be selected. Check the [SOURCE SELECT] setting. ( 4)
“LOADING” appears when you enter search mode by pressing .
This unit is still preparing the iPod/iPhone music list. It
Connect the antenna firmly.
may take some time to load, try again later.
Correct characters are not displayed.
Playback order is not as intended.
The playback order is determined by the file name.
Elapsed playing time is not correct.
This depends on the recording process earlier.
“NOT SUPPORT” appears and file skips.
Check whether the file is a playable format. ( 24)
“UNSUPPORTED DEVICE” appears.
“UNRESPONSIVE DEVICE” appears.
Make sure the device is not malfunction and reattach
Cannot playback at [AUTO MODE].
the device.
“USB HUB IS NOT SUPPORTED” appears.
This unit cannot support a USB device connected via a
USB hub.
“CANNOT PLAY” appears. Connect a USB device that contains playable audio files.

“NO DEVICE” or “READING” keeps flashing.
Phone sound quality is poor.
Sound is being interrupted or skipped during playback of a Bluetooth audio player.
Playback is intermittent or sound skips.
Turn off the power saving mode on the Android device.
The connected Bluetooth audio player cannot be controlled.
“DISCONNECTED” USB is disconnected from the head unit. Please make
sure the device is connected properly through USB.
“PLEASE WAIT” The unit is preparing to use the Bluetooth function. If the
message does not disappear, turn off and turn on the unit, then connect the device again.
“NOT SUPPORT” The connected phone does not support Voice Recognition
feature.
“CHECK APP” The Spotify application is not connected properly, or
user is not login. End the Spotify application and restart, then log in to your Spotify account.
“ERROR” Try the operation again. If “ERROR” appears again, check
if the device supports the function you have tried.
No Bluetooth device is detected.
“H/W ERROR” Reset the unit and try the operation again. If “H/W
ERROR” appears again, consult your nearest service center.
“SWITCHING NG” The connected phones might not support phone
switching feature.
If you still have troubles, reset the unit. ( 3)
Symptom Remedy · Symptom Remedy · Spotify


FM Frequency Range 87.5 MHz — 108.0 MHz (50 kHz step)
Usable Sensitivity (S/N = 26 dB) 0.71 μV/75 Ω (8.2 dBf)
FLAC Decode FLAC file, up to 24 bit/96 kHz
Frequency Response (±3 dB) 30 Hz — 15 kHz
Frequency Response (±3 dB) 20 Hz — 20 kHz
Frequency Range 531 kHz — 1 611 kHz (9 kHz step)
Usable Sensitivity (S/N = 20 dB) 28.2 μV (29 dBμ)
Frequency Range 153 kHz — 279 kHz (9 kHz step)
Usable Sensitivity (S/N = 20 dB) 50 μV (33.9 dBμ)
Output Power +4 dBm (MAX), 0 dBm (AVE) Power Class 2
Maximum Communication Range Line of sight approx. 10 m (32.8 ft)
Profile HFP1.6 (Hands-Free Profile) A2DP (Advanced Audio Distribution Profile) AVRCP1.5 (Audio/Video Remote Control Profile) PBAP (Phonebook Access Profile) SPP (Serial Port Profile)
Frequency Response (±1 dB) 20 Hz — 20 kHz
Maximum Output Power 50 W × 4 or 50 W × 2 + 50 W × 1 (Subwoofer = 4 Ω)
Full Bandwidth Power (at less than 1 % THD)

Operating Voltage (10.5 V — 16 V allowable)
Maximum Current Consumption 10 A
Operating Temperature Range –10°C — +60°C
Installation Size (W × H × D) 182 mm × 53 mm × 100 mm
Net Weight (includes Trimplate, Mounting Sleeve)
0.6 kg
contact with metal parts to protect the wires.
Subject to change without notice.
General

Installing the unit (in-dash mounting)
Do the required wiring. ( 31)
Hook on the top side
Orientate the trim plate as illustrated before fitting.
Dashboard of your car
Bend the appropriate tabs to hold the sleeve firmly in place.
Basic procedure 1 Remove the key from the ignition switch, then disconnect the terminal of the car battery. 2 Connect the wires properly. See Wiring connection. ( 31) 3 Install the unit to your car. See Installing the unit (in-dash mounting). 4 Connect the terminal of the car battery. 5 Press to turn on the power. 6 Detach the faceplate and reset the unit within 5 seconds. ( 3)
How to remove the unit When installing without the mounting sleeve 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (commercially available).
Use only the specified screws. Using wrong screws might damage the unit.

When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit.
Microphone input jack ( 10)
Connecting the ISO connectors on some VW/ Audi or Opel (Vauxhall) automobiles You may need to modify the wiring of the supplied wiring harness as illustrated below.
Light blue/yellow (Steering remote control wire)
To the steering wheel remote control adapter
Pin Color and function A4 Yellow : Battery A5 Blue/White : Power control (12 V 350 mA) A6 Orange/white : Car light control switch A7 Red : Ignition (ACC) A8 Black : Earth (ground) connection B1 Purple ] : Rear speaker (right) For 3-way crossover: Tweeter (right) B2 Purple/black [ B3 Gray ] : Front speaker (right) For 3-way crossover: Mid range speaker (right) B4 Gray/black [ B5 White ] : Front speaker (left) For 3-way crossover: Mid range speaker (left) B6 White/black [ B7 Green ] : Rear speaker (left)* For 3-way crossover: Tweeter (left) B8 Green/black [
If your car does not have an ISO terminal We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer.
* You can also connect a subwoofer speaker directly without an external subwoofer amplifier. For setting, 20.
Pagina's waarnaar wordt verwezen in deze handleiding — fabrikant, ondersteuning en downloads.
Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.
Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.