Gebruiksaanwijzing /service van het product DVR-16K van de fabrikant Bosch Appliances
Ga naar pagina of 140
Divar MR Digital V ideo Recorder T ype numbers D VR-8K, DVR-16K, D VR-8L, D VR-16L en Operation Manual_en.
.
Digital Video Recorder T able of contents | en 1 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 T able of cont ents 1 Safety 3 1.1 Important safety instructions 3 1.2 Safe ty precautions 4 1.3 Important N otices 4 2 Introduction 9 2.1 Featur es 9 2.
2 en | T able of contents Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 5.4 EXPORT 80 6 Control Center 83 6.1 PC minimum Requirements 83 6.2 Control Cent er installation 83 6.3 Connecting to t he DVR 83 6.4 Main screen of DVR Contr ol Center Pr ogram 86 6.
Digital Video Recorder Safe ty | en 3 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 1 Saf ety 1.1 Impor tant safety instructions Read, follo w , and retain f or future r eference all of t he follo wing safe ty instructions. Heed all warnings on the unit and in the operating instructions before operating the unit.
4 en | Safe ty Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems – unit does not operat e normally when the user correctly f ollow s the operating instruc- tions.
Digital Video Recorder Safe ty | en 5 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 All-pole power switch - Incorporate an all-pole po wer switch, with a contact separation of at least 3 mm in each pole, int o the electrical installation of the building.
6 en | Safe ty Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Moving - Disconnect the pow er befor e moving the unit. Mov e the unit with care.
Digital Video Recorder Safe ty | en 7 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Trademarks All hardwar e and software product names used in this document ar e likely t o be registered trade- marks and must be treat ed accordingly .
8 en | Safe ty Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems.
Digital Video Recorder Introduction | en 9 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 2 Introduction 2.1 F eatures • Stable embedded operating system. • Small fi le sizes with MPEG-4 compression. • Internal storage capacity to 2TB.
10 en | Introduction Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems • Covert camera protection. • User management (User level control). • PTZ Control: - For more details see "8.2.4 Supported PTZ camera list".
Digital Video Recorder Introduction | en 11 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 2.3 F ront panel DVR-16K / D VR-16L ab c d e f gh i j k l DVR-8K / D VR-8L ab c d e f gh i j k l Figure 2.2 Front panel a Arrow Buttons ( b B v V ): Select or move between the menu options.
12 en | Introduction Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems c Disc Tray (DVR-8L and DVR-16L only) Insert a disc here.
Digital Video Recorder Introduction | en 13 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 2.4 Back panel DVR-16K / D VR-16L ab c de f g h i j k f l m n o DVR-8K / DVR-8L ab c de f g h i j k l m n o Figure 2.3 Back panel a VIDEO INPUT: Connect the camera’s video output to these BNC connectors.
14 en | Introduction Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems m MON A (BNC Type Connector): Connect to main monitor or display device. n VGA: Connect a VGA monitor. o USB Ports: Connect optional extension USB devices (e.
Digital Video Recorder Introduction | en 15 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 • ENTER: Confi rms menu selections or go to full screen of a selected camera in multiscreen. Pressing this key again to return from full screen to multiscreen.
16 en | Introduction Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems.
Digital Video Recorder Connections and settings | en 17 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3 Connections and settings Precautions • There are various ways to connect the unit, depending on the camera and other equipment.
18 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems a Connect the cameras to the BNC loop-through camera inputs (automatically terminated). b Connect the Monitor, DVR, VCR, or others to the video out BNC.
Digital Video Recorder Connections and settings | en 19 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.5 CCT V ke yboard connections The ke yboard input connect or is used t o connect an ext ernal CCT V ke yboard t o the unit. Connect the k eyboard t o the KBD IN connect or .
20 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.8 Connecting a RS-422/485 device Use this por t t o connect PTZ cameras. Connect the PTZ serial communication lines to t he RS-422/485 terminal.
Digital Video Recorder Connections and settings | en 21 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.9 Connecting the BIPHASE por t The Biphase por t is used for connecting cameras that use Bosc h Biphase communications to control camera positioning.
22 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.10 Connecting the ALARM I/O por t Alarm inputs and outputs are supplied via a 25-pole D-type sock et. The screw t erminal input/output connection board supplied with the unit sim plifies all alarm connections to the unit.
Digital Video Recorder Connections and settings | en 23 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Alarm_in_11 11 Alar m input 11 Alarm_in_12 12 Alar m input 12 Alarm_in_13 13 Alar m inp.
24 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems • It is not possible to connect the VGA monitor and the composite monitor simultaneously. Consequently, the user is obliged to choose either the composite monitor or the VGA monitor.
Digital Video Recorder Connections and settings | en 25 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Figure 3.7 The B button on t he front panel Not e: You can select the monitor type by using the A ( ) or B ( ) button at any time. If you change the monitor type, the system will be rebooted automatically.
26 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems a Channel Number: Displays the channel number. b Camera Name: Displays the edited camera name. c Recording status icon: Displays the recording status.
Digital Video Recorder Connections and settings | en 27 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.14 Selecting live scr een mode 3.14.1 Monitor A Y ou can select the live screen mode t o display a full, 4-vie w , 6-view , 8-view , 9-view or 16-view screens on the main monit or .
28 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.14.2 Monitor B You can select the live screen mode to full or 4-view screens on the monitor B. 1. Press B ( ) button or click the icon in the system control bar.
Digital Video Recorder Connections and settings | en 29 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 a b c d e f g h i j k l m n o Figure 3.11 The PTZ vir tual remot e control. Button F unction a Remove t he PTZ vir tual remot e control. b Use to pan/tilt the camera.
30 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems m Register pr eset positions. n Move t he camera to the pr eset position. o Sends the Aux ON command. (Used only f or BOSCH Aut o Dome camera).
Digital Video Recorder Connections and settings | en 31 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Not e: This function may no t be available depending on PTZ cameras. 3.15.5 To tour the preset positions You can tour all preset positions.
32 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.16 Viewing Syst em Information To view system information: 1. Press INFO or click the INFO icon in the system control bar. The system information window is displayed on the main monitor.
Digital Video Recorder Connections and settings | en 33 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3. Press LOG or click the [Exit(LOG)]button to exit the window.
34 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.18 Configuration Menu The featur es and options of the DVR ar e configured through the menu. The operations of this unit can be set via a menu displa yed on the main monit or .
Digital Video Recorder Connections and settings | en 35 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.18.1 Using a mouse to set a menu Use the left and right mouse buttons t o set the menu. • Left button: Use to select a required item or decrease the options value.
36 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.19 Camera settings 3.19.1 Camera The camera name, covert and input audio channel settings are configured. Figure 3.15 Camera setup menu • Ch: Displays the channel number.
Digital Video Recorder Connections and settings | en 37 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.19.2 Video adjustment Adjust the brightness, contrast and color settings of eac h camera channel. Y ou can see the settings screen from t he previe w window s.
38 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.19.3 PTZ Settings f or the PTZ cameras connected via t he data por t of the biphase connecter or RS-422/485 terminal. Figure 3.17 PTZ setup menu.
Digital Video Recorder Connections and settings | en 39 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.19.4 Continuous recording Settings concerning continues recording. Figure 3.18 Continuous recording setup menu • Ch: Displays the channel number.
40 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.19.5 Instant recording Settings concerning instant recording. Figure 3.19 Instant recording setup menu • Ch: Displays the channel number.
Digital Video Recorder Connections and settings | en 41 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.19.6 Input recording Settings concerning input recor ding. Figure 3.20 Input recording setup menu • Ch: Displays the channel number. • Resolution: Selects the recording resolution.
42 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.19.7 Motion recording Settings concerning motion r ecording. Figure 3.21 Motion recording setup menu • Ch: Displays the channel number.
Digital Video Recorder Connections and settings | en 43 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.19.8 Video format Selects the video format t o NTSC or P AL according to y our video syst em format. 1. Select the video format. The confi rmation message is displayed.
44 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Figure 3.23 Schedule setup menu 3.20.1 To set the Recording Schedule for a typical day of the week 1. Select a day of the week. (Sun, Mon, Tue, Wed, Thu, Fri or Sat) 2.
Digital Video Recorder Connections and settings | en 45 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 - Green (Input+Motion recording): Recording starts automatically when the input is activated or motion has been detected. - Blue+Red (Continuous+Input event recording) : Recording starts automatically from the preset time.
46 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.20.2 To set a recording schedule for an Exception days In addition to t he weekly schedule, up t o 10 specif ic date/time periods can be defined.
Digital Video Recorder Connections and settings | en 47 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Figure 3.29 Exception days setup menu 4. Enter the necessary information for year, month and date. • b/B/v/V : Press to move the columns, [OK] or [Cancel] buttons.
48 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.20.3 Checking the Exception days schedule list 1. Press INFO when the “Exception days” option is selected. The exception days scheduled list appears.
Digital Video Recorder Connections and settings | en 49 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Figure 3.32 Channel copy menu 4. Use b/B to move to the left or right column then press ENTER to select the target channel(s). You can cancel the selected channel by pressing ENTER.
50 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.21 Display settings 3.21.1 OSD Figure 3.34 OSD setup menu • Language: Select a language for the setup menu and information display. • Camera name - On: Displays the title of the camera.
Digital Video Recorder Connections and settings | en 51 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.21.2 Monitor A Figure 3.35 Monitor A setup menu • Seq. dwell time: You can set the camera sequence time to 2 sec, 5 sec, 10 sec, 20 sec, 30 sec, 40 sec, 50 sec, 60 sec, 70 sec, 80 sec or 90 sec.
52 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems • Seq. dwell time: You can set the camera sequence time to 2 sec, 5 sec, 10 sec, 20 sec, 30 sec, 40 sec, 50 sec, 60 sec, 70 sec, 80 sec or 90 sec.
Digital Video Recorder Connections and settings | en 53 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.22.2 Motion Figure 3.38 Motion setup menu • Camera: Select the camera to set motion detection. • Sensitivity: Set the level of sensitivity for the created motion detection area.
54 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.22.3 Alarm acknowledgement Figure 3.39 Alarm acknowledgement setup menu • Alarm ackn. - Manual: Use the ACK button on the remote control or button on the front panel to stop alarm.
Digital Video Recorder Connections and settings | en 55 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.23 Network settings 3.23.1 TCP/IP Figure 3.40 TCP/IP setup menu • DHCP: DHCP stands for Dynamic Host Confi guration Protocol. - On: Network settings of this unit are confi gured automatically by the DHCP server.
56 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.23.2 DDNS (Dynamic Domain Name System) Figure 3.41 DDNS setup menu • User name: Enter the DDNS registered user name using the virtual keyboard.
Digital Video Recorder Connections and settings | en 57 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.23.3 Notification Figure 3.42 Notification setup menu • Alarm on: - On: Sends an e-mail when an input has been activated. - Off: Not used.
58 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.23.4 Mail Figure 3.43 Mail setup menu • Notifi cation - On: Notifi es the user by e-mail of unit operating information, according to notifi cation settings.
Digital Video Recorder Connections and settings | en 59 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.23.5 Emergency Figure 3.44 Emergency setup menu • Notifi cation: - On: Notifi es the Alarm notifi er program about unit operating information according to your notifi cation settings.
60 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.24 Syst em settings 3.24.1 Date/Time Figure 3.45 Date/Time setup menu • Date: Enter the current date. • Time: Enter the current time.
Digital Video Recorder Connections and settings | en 61 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.24.2 NTP Figure 3.46 NTP setup menu • NTP: Set to On when using the NTP (Network Time Protocol) server for time adjustment.
62 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.24.3 Beeper Figure 3.47 Beeper setup menu • Button beeper - On: Makes a sound when using the buttons. - Off: Turns off the button beep.
Digital Video Recorder Connections and settings | en 63 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.24.4 User Y ou can register a ne w user with various access rights t o the DVR or Control Cent er . Figure 3.48 User setup menu • No.: Displays the user number.
64 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.24.5 Update The update f eature allo ws y ou to upgrade D VR software and add/upgrade PTZ prot ocols. In this case, the current DVR se ttings are not dele ted or r eplaced during the updat e process.
Digital Video Recorder Connections and settings | en 65 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.24.6 Configuration Figure 3.50 Configuration setup menu • Import confi guration: Import the DVRs confi guration data from the USB memory stick.
66 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.24.7 Hard disk Figure 3.51 Hard disk setup menu • Overwrite: - All: Overwrite recording is possible when the normal partition and event partition of HDD have fully recorded.
Digital Video Recorder Connections and settings | en 67 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.24.8 Backup Figure 3.52 Backup setup menu • Partition selection: Select a backup partition. • Schedule: You can set the backup schedule.
68 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Not es: • The backup function is no t suppor ted on t he ext ernal USB CD-ROM drive. • Backup t o external USB HDD is supported with maximum 250 GB.
Digital Video Recorder Connections and settings | en 69 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 - 1st. Status of making ISO image - 2nd. Status of writing Daily/W eekly backup 1. Connect the USB device for backup. You cannot use the CD or DVD writer for daily or weekly backup.
70 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.24.9 System Figure 3.53 System setup menu • IR remote controller: Select the IR remote ID for this unit (01~09). If you use multi systems set the IR remote ID for each DVR unit.
Digital Video Recorder Recording | en 71 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 4 Recording Images from a camera will be recor ded on the built-in hard disk. Not e: External recording devices can be used as copy areas for images recorded on the hard disk.
72 en | Recording Digital V ideo Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Not es: • Y ou can not record the Instant and Continuous r ecording under the f ol- lowing conditions. - A HDD is not f ormatted. - The channel has no video input f or display .
Digital Video Recorder Search and pla yback | en 73 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 5 Search and pla yback 5.1 Playback It is possible to pla y a recor ded image without stopping r ecording. 1. Select a channel you want to playback.
74 en | Search and pla yback Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Figure 5.2 Search menu tab 3. Use b/B to select [INTERNAL HDD] then press ENTER. Figure 5.3 Source device select menu 4. Use b/B to select the desired source device.
Digital Video Recorder Search and pla yback | en 75 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Figure 5.4 Date/time search menu 1. Select the [Date/time search] menu. 2. Use v/V/b/B to select the year, month, date, hour or minute column, then press ENTER.
76 en | Search and pla yback Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Not es: • Recorded data shown on t he time graph will be displayed in differ ent colors depending on the recor ding type. - Blue : Continuous/Instant recor ding.
Digital Video Recorder Search and pla yback | en 77 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 6. Select the recording data on the event list then press bB , click [Play ( B )] or double click the selected data to start playback. The picture is displayed on the monitor A.
78 en | Search and pla yback Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Figure 5.9 Motion detect list 7. Select the recording data on the motion detect list then press bB , click [Play ( B )] or double click the selected data to start playback.
Digital Video Recorder Search and pla yback | en 79 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Not es: • If you want t o delete the bookmark on the list, pr ess the CLEAR button. • Backup data can no t be play ed back by a bookmark sear ch.
80 en | Search and pla yback Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 5.4 EXPORT This unit can manually copy r ecorded images and audio from built-in HDD t o the e xternal r ecording devices. 1. Press COPY or click .
Digital Video Recorder Search and pla yback | en 81 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Not es: • Y ou can also use the COPY button on the fr ont panel for e xpor t function. - DVR-16K/DVR-16L: Pr ess AL T and then COPY butt on.
82 en | Search and pla yback Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems.
Digital Video Recorder Control Cent er | en 83 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 6 Control Cent er Control Cent er is the netw ork program of the DVR-8K/D VR-8L and DVR-16K/DVR-16L. This manual is written based on D VR-16L (16 channels).
84 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems The connection list menu is displayed. Figure 6.1 Connection list window 3. Select [Add] and the connection setup menu is displayed. Figure 6.2 Connection setup window 4.
Digital Video Recorder Control Cent er | en 85 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Not e: In the case of entering the server name instead of the IP Address, set up the DDNS confi guration properly in the server. 6.3.2 User log on 1.
86 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 6.4 Main screen of DVR Contr ol Center Pr ogram Figure 6.5 Main screen of DVR Control Center Program 1. Program Menu • File - Exit: Exit the program.
Digital Video Recorder Control Cent er | en 87 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 You can search the recorded data as shown below. - Date/Time Search (See "6.6.1 Using the Date/Time Search function") - Event Search (See " 6.
88 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 6.5 L ive Mode 6.5.1 Using the Camera View 1. Select the [Camera View] tab in the live mode. 2. Select the registered site name and double click the left mouse button or click the plus mark of the registered site name.
Digital Video Recorder Control Cent er | en 89 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 6.5.2 Using the live window Playback of Recorded Data A B C D E Figure 6.9 Camera View window 1. Select the camera’s display window. 2. Select the date.
90 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 1. Select the PTZ camera channel window in the camera view mode. 2. Select Pan/Tilt/Zoom tab. 3. Use virtual remote control buttons to control the PTZ camera.
Digital Video Recorder Control Cent er | en 91 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Not e: The preset range is a vailable from 0 t o 255 on this unit.
92 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 6.5.4 Using the Log View function Y ou can see the syst em log list of selected sit e names in the remo te se tup tab via the netw ork. 1. Select the log view tab.
Digital Video Recorder Control Cent er | en 93 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Figure 6.13 The system log list window 6.6 Search mode Y ou can search the data of a select ed site name in t he remot e setup tab via t he network.
94 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Check this bo x when you w ant to vie w from all camera c hannel window s. Display s selected camera number . Figure 6.15 Camera channel select window 4.
Digital Video Recorder Control Cent er | en 95 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 The event list is displayed. 6. Select the event from the event list.
96 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 1. Select the Smart Search tab. 2. Click the date icon and select the day. (The selectable days are displayed in blue color.) 3. Select the camera channel.
Digital Video Recorder Control Cent er | en 97 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Figure 6.24 The searched data list 8. Select the channel from the list.
98 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Camera Setting Figure 6.26 The Camera setting window 1. Select a channel for settings. If you want to block a channel from other users, mark up the convert option.
Digital Video Recorder Control Cent er | en 99 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Continuous recording settings 1. Click the [Continuous Rec] button. The continuous recording setting window appears. Figure 6.27 The Continuous recording se tting window 2.
100 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Input recording settings 1. Click the [Input Rec] button. The instant recording setting window appears. Figure 6.29 The Input recor ding setting window 2.
Digital Video Recorder Control Cent er | en 101 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Display settings Figure 6.31 The Display se tting window 1. Set the OSD options. 2. Set the monitor A option. 3. Set the monitor B options. 6.7.2 Schedule setup Figure 6.
102 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 4. Click the start time cell block and drag & drop to select a time period cell block.
Digital Video Recorder Control Cent er | en 103 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 6. Enter the name of the exception day. 7. Click the add button to add the special day settings.
104 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 6.7.4 Network setup Figure 6.36 The Network setup windo w TCP/IP settings The [DHCP], [IP address], [Subnet mask], [Gat ew ay], [Primary DNS], [Secondar y DNS] and [Remo te client por t no.
Digital Video Recorder Control Cent er | en 105 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 • Video loss: Sends an e-mail when a video signal from the camera has stopped because of a cable disconnection or malfunction of a camera. • Motion detect: Sends an e-mail when motion detection has occurred.
106 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems • NTP: Mark up when using the NTP (Network Time Protocol) server for time adjustment. • Date format: Select the date display format. • Time zone: This option setting is not available in the Control Center program.
Digital Video Recorder Control Cent er | en 107 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 User settings Add User You can add user. 1. Click the “Add” button. User Setting window is displayed. 2. Enter the User ID and Password. 3. Enter the password again to verify.
108 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems • Site Name: Displays the selected site name. • Channel: Select a channel(s) to export the data. You can select more than one channel. Click on the icon to select or de-select all cameras.
Digital Video Recorder Additional programs | en 109 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 7 Additional programs 7.1 Alarm Notifier program If you se t the notification in the emergency option t o On, the sy stem sends a message accor ding to the settings of the no tification options in the setup menu.
110 en | Additional programs Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 7.2 Main Screen of Alarm Notifier program ab c de f g h i Figure 7.3 Main Screen of Emergency Agent a Displays message type. b Displays IP Address.
Digital Video Recorder Additional programs | en 111 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 7.2.1 Port setting Figure 7.4 Port setting window 1. Click the button. The option window is displayed. 2. Enter the port number of the emergency agent listening port.
112 en | Additional programs Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 7.2.4 Delete the message from the list 1. Select the message(s) you want to delete. 2. Click the button. The confi rmation window is displayed.
Digital Video Recorder Additional programs | en 113 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 > Exit: Exit the program. - Lang(L): Select the language for Arc hive Play er program. - Help(H) > About Archiv e Player : Displays Archive Pla yer information.
114 en | Additional programs Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Figure 7.9 The Archiv e Player window 5. Click the button to stop playback.
Digital Video Recorder Additional programs | en 115 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 7.4 Web View er program 7.4.1 Logging into the Web Viewer 1. Start the web browser. 2. In the Address Box, enter “HTTP://” and the IP Address of the DVR.
116 en | Additional programs Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 7.4.2 Using the Web Viewer Y ou can control the live image using the W eb Viewer . Figure 7.11 The Web View er window Mode select icon. Click to change the PTZ View mode or Live View mode.
Digital Video Recorder Additional programs | en 117 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 7.4.4 PTZ View control • Click the icon to change the PTZ view mode. The PTZ virtual remote control is displayed. Figure 7.12 The PTZ vir tual remot e control window • Use virtual remote control buttons to control the PTZ camera.
118 en | Additional programs Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems.
Digital Video Recorder Refer ence | en 119 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 8 REFERENCE 8.1 T roubleshooting Check the f ollowing guide f or the possible cause of a problem bef ore contacting service. Symptoms Resolutions The syst em pow er does not turn on.
120 en | Refer ence Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Symptoms Resolutions Audio data recorded with video data is not playing. Check that the audio r ecording option is correctl y set f or the camera you wish t o record audio.
Digital Video Recorder Refer ence | en 121 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Symptoms Resolutions An e-mail sent from this pr oduct was not r eceived. E-mail reception failed wit hout SMTP ser ver setting. • Make sur e the netw ork is correctly set.
122 en | Refer ence Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 8.2 Recommended devices 8.2.1 Supported USB Memory list No. Maker Model Name Capacity USB V ersion 1 Sandisk Cruzer Micro 256MB / 512MB / 1GB Ver 2.0 2 Sony Ultra Mini USM 256MB / 512MB / 1GB Ver 2.
Digital Video Recorder Refer ence | en 123 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 8.2.4 Supported PTZ camera list Prot ocol Name Mak er Pan/ Tilt Zoom F ocus Iris Preset T our Setup .
124 en | Refer ence Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 8.3 Time zones Timezone name Timezone Abbreviation Timezone DST Eniwet ok , Kwajalein EK -12:00 Midw.
Digital Video Recorder Refer ence | en 125 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 8.4 F actor y default conf iguration settings Classification Detailed It ems Default Se tting F acto.
126 en | Refer ence Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Classification De tailed Items Default Setting F actory Default 1st level 2nd level 3rd le vel DVR-16K/ DVR-16L DVR-8K/ DVR-8L Display OSD Language English Y es Camera name On Y es Camera status On Y es Monitor A Seq.
Digital Video Recorder Refer ence | en 127 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Classification Detailed It ems Default Setting F actor y Default 1st level 2nd level 3rd lev el DVR-16K/ DVR-16L DVR-8K/ DVR-8L Syst em Date/Time Date 2007.
128 en | Refer ence Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 8.5 Recording Time T able (500GB HDD) Resolution (NTSC/P AL) Quality IPS (NTSC/P AL) Recording Time .
Digital Video Recorder Refer ence | en 129 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Resolution (NTSC/P AL) Quality IPS (NTSC/P AL) Recording Time (Hr) Video (NTSC/P AL) Video+Audio (NTSC/P AL) DVR-8K/ DVR-8L DVR-16K/ DVR-16L DVR-8K/ DVR-8L DVR-16K/ DVR-16L 704x240/ 704x288 Lowest 15/15 642/514 321/257 576/461 288/231 7.
130 en | Refer ence Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Resolution (NTSC/P AL) Quality IPS (NTSC/P AL) Recording Time (Hr) Video (NTSC/P AL) Video+Audio (NTSC/P AL) DVR-8K/ DVR-8L DVR-16K/ DVR-16L DVR-8K/ DVR-8L DVR-16K/ DVR-16L 704x480/ 704x576 High 7.
Digital Video Recorder Refer ence | en 131 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Resolution (NTSC/P AL) Quality IPS (NTSC/P AL) Recording Time (Hr) Video (NTSC/P AL) Video+Audio (NT.
132 en | Refer ence Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Resolution (NTSC/P AL) Quality IPS (NTSC/P AL) Recording Time (Hr) Video (NTSC/P AL) Video+Audio (NTSC/P AL) DVR-8K/ DVR-8L DVR-16K/ DVR-16L DVR-8K/ DVR-8L DVR-16K/ DVR-16L 704x480/ 704x576 Lowest 7.
Digital Video Recorder Refer ence | en 133 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 8.7 Specifications Model DVR-8K/D VR-8L DVR-16K/DVR-16L Video Input 81 6 Composit e video 0.5-2Vpp, 75 ohm, automatic t ermination. Output Loop Through 81 6 Mon A (CVBS) 11 1.
134 en | Refer ence Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Model DVR-8K/D VR-8L DVR-16K/DVR-16L Po wer 100~240V AC, 50/60Hz Po wer consumption Max. 80 W (with 1x HDD) / Max. 120 W (with 4x HDD) Dimension (WxDxH) 430 x 425 x 88 mm / 16.
Digital Video Recorder Refer ence | en 135 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12.
136 en | Refer ence Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems.
.
Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 2008 F01U | 2.0 | 2008.12 P/N: MFL????????.
Een belangrijk punt na aankoop van elk apparaat Bosch Appliances DVR-16K (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Bosch Appliances DVR-16K heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Bosch Appliances DVR-16K vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Bosch Appliances DVR-16K leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Bosch Appliances DVR-16K krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Bosch Appliances DVR-16K bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Bosch Appliances DVR-16K kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Bosch Appliances DVR-16K . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.