


PowerMaxx BS PowerMaxx BS Basic PowerMaxx BS Quick Basic PowerMaxx BS Quick Pro PowerMaxx SB PowerMaxx SB Basic
de Originalbetriebsanleitung 5 en Original instructions 9 fr Notice originale 13 nl Oorspronkelijke gebruiksaanwijzing 17 it Istruzioni originali 21 es Manual original 25 pt Manual original 29 sv Originalbruksanvisning 33
fi Alkuperäinen käyttöopas 37 no Original bruksanvisning 41 da Original brugsanvisning 45 pl Oryginalna instrukcja obsługi 49 el Πρωτότυπες οδηγίες λειτουργίας 53 hu Eredeti használati utasítás 57 ru Оригинальное руководство по эксплуатации 61







PowerMaxx BS Quick...


b
b
A
PowerMaxx BS

= 100 % · = 66% · = 33%

*2) 2004/108/EC (-> 19.04.2016) / 2014/30/EU (20.04.2016 ->), 2006/42/EC, 2011/65/EU *3) EN 60745-1:2009+A11:2010, EN 60745-2-1:2010, EN 60745-2-2:2010
2015-09-16, Volker Siegle Direktor Produktentstehung & Qualität (Vice President Product Engineering & Quality) *4) Metabowerke GmbH - Metabo-Allee 1 - 72622 Nuertingen, Germany

Mögliches Zubehör - Possible accessories - Accessoires possibles - Mogelijke toebehoren - Accessori possibili - Accesorios disponibles - Acessórios possíveis - Tillgängliga tillbehör - Mahdolliset lisätarvikkeet - Mulig tilbehør - Muligt tilbehør - Dopuszczalne akcesoria - Διαθέσιμα εξαρτήματα - Lehetséges tartozék - Возможные принадлежности
6.27240 1,5 - 13 mm (PowerMaxx BS Quick...)
6.27261 6.27259 1 - 10 mm
(PowerMaxx BS Quick...)
(PowerMaxx BS Quick...)
6.36219 1 - 10 mm
6.36623 0,8 - 6,5 mm
6.31281
(PowerMaxx BS) (PowerMaxx BS)
10,8 V 1,5 Ah 6.25439
10,8 V 2,0 Ah 6.25438
6.27241
10,8 V 4,0 Ah 6.25585
10,8 V 5,2 Ah 6.25597
(PowerMaxx BS Quick...)

6.25390 0,8 x 5,5 mm 1,0 x 5,5 mm 1,2 x 6,5 mm PH1, PH2, PH3, PZ1, PZ2, PZ3

6.25391 PZ1, PZ2, PZ3, TX10, TX15, TX20, TX25, TX30, TX40

6.25392 TX8, TX9, TX10, TX15, TX20, TX25, TX27, TX30, TX40
6.25393 2 x PZ1, 3 x PZ2, 1 x PZ3
Zubehör nicht im Lieferumfang enthalten - Accessories not included in scope of delivery - Accessoires non fournis - Toebehoren niet bij de levering inbegrepen - Accessori non compresi in dotazione - Accesorios no incluidos en el suministro de serie - Acessórios não incluídos no volume de fornecimento - Tillbehör ingår inte - Lisätarvikkeet eivät kuulu toimitussisältöön - Tilbehør er ikke inkludert - Tilbehør er ikke inkluderet i leveringsomfanget - Akcesoria nie objête zakresem dostawy - Τα εξαρτήματα δε συμπεριλαμβάνονται στα υλικά παράδοσης - A tartozék nem képezi a szállítmány részét - Принадлежности не входят в комплект поставки
(PowerMaxx BS)

with plenty of water. If battery fluid leaks out and comes into contact with your eyes, wash them with clean water and seek medical attention immediately!
We, being solely responsible: Hereby declare that these cordless drills/screwdrivers and impact drills, identified by type and serial number *1), meet all relevant requirements of directives *2) and standards *3). Technical documents for *4) - see page 3.
Protect battery packs from water and moisture!
Do not use faulty or deformed battery packs!
Do not expose battery packs to fire!
The drills and impact drills are suitable for drilling in metal, wood, plastic and similar materials, and also for screw driving and thread tapping. The impact drills are also suited for drilling in masonry, brickwork and stone. The user bears sole responsibility for any damage caused by improper use. Generally accepted accident prevention regulations and the enclosed safety information must be observed.
Do not open battery packs! Do not touch contacts or short-circuit battery packs! Remove the battery pack from the machine before any adjustment or maintenance is carried out. Before fitting the battery pack, make sure that the machine is switched off. Keep hands away from the rotating tool! Remove chips and similar material only with the machine at a standstill. Secure the workpiece to prevent slipping or rotation (e.g. by securing with screw clamps). LED lights (2): Do not observe the LED radiation directly with optical instruments. Reducing dust exposure:
For your own protection and for the protection of your electrical tool, pay attention to all parts of the text that are marked with this symbol! WARNING – Reading the operating instruc- tions will reduce the risk of injury.
Some of the particles generated using this power tool may contain substances known to cause cancer, allergic reactions, respiratory diseases, birth defects or other reproductive harm. Some examples of these substances are: lead (from lead-based paints), crystalline silica (from bricks cement, etc.), additives for wood treatment (chromate, wood preservative), some types of wood (like oak and beech dust), metals, asbestos. The risk from exposure to such substances will depend on how long the user or nearby persons are being exposed. Do not let particles enter the body. To reduce exposure to these substances: work in a well ventilated area and wear protective equipment, such as dust masks that are specially designed to filter out microscopic particles. Observe the relevant guidelines for your material, staff, application and place of application (e.g. occupational health and safety regulations, disposal). Collect the generated particles at the source, avoid deposits in the surrounding area. Use suitable accessories for special work. In this way, fewer particles enter the environment in an uncontrolled manner. Use a suitable extraction unit. Reduce dust exposure with the following measures: - Do not direct the escaping particles and the
Wear ear protectors with impact drills (machines with the designation SB). Exposure to noise can cause hearing loss. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. A cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. Ensure that the place where you wish to work is free of power cables, gas lines or water pipes (e.g. check using a metal detector).
A slightly acidic, flammable fluid may leak from defective Li-ion battery packs!
exhaust air stream at yourself or nearby persons or on dust deposits. - Use an extraction unit and/or air purifiers.
If battery fluid leaks out and comes into contact with your skin, rinse immediately

- Ensure good ventilation of the workplace and
Switch off the machine at the trigger (10). Then continue working as normal. Try to prevent the machine from seizing.
keep it clean using a vacuum cleaner. Sweeping or blowing stirs up dust. - Vacuum or wash protective clothing. Do not blow,
beat or brush.
6.2 Battery pack Charge the battery pack before use.
If performance diminishes, recharge the battery pack.
See page 2.
1 Chuck * 2 LED lights 3 Adjusting sleeve (torque control, maximum torque) * 4 Adjusting sleeve (torque limitation) * 5 Adjusting sleeve (screw driving, drilling, impact drilling) * 6 Slide-switch (1st/2nd gear) 7 Battery indicator to check the battery's charge level 8 Belt hook 9 Rotation selector switch (direction of rotation setting, transporting safety device) 10 Trigger 11 Battery pack release button 12 Battery pack 13 Protective cap * * depending on model
The ideal storage temperature is between 10°C and 30°C.
Removing the battery pack Press the battery pack release (11) button and remove the battery pack (12).
To fit Slide in the battery back (12) until it engages .
6.3 Setting the direction of rotation, engaging the transporting safety device (switch-on lock) Do not activate rotation selector switch (9) unless the motor has completely stopped! Actuate the rotation selector switch (direction of rotation setting, transporting safety device) (9). See page 2. R = Clockwise setting L = Counter-clockwise setting 0 = Middle position: transportation safety device (Switch-on lock) set
6.4 Selecting gear stage
1st gear (low speed, particularly high torque, preferable for screwing)
6.1 The machine's multifunctional monitoring system
If the machine switches off automatically, the machine electronics have activated automatic protection mode. A warning signal sounds (continuous beeping). The beeping stops after a maximum of 30 seconds or when the trigger is released (10).
2nd gear (high speed, preferable for drilling)
6.5 Set torque limitation, screw driving, drilling, impact drill Machines with the designation BS... 1...20 = Set torque (with torque limitation) by turning the sleeve (3) - intermediate settings are also possible. = Set drilling by turning the sleeve (3) (max.
In spite of this protective function, overloading is still possible with certain applications and can result in damage to the machine.
Causes and remedies:
torque, without torque limitation) To avoid overloading the motor, do not jam the spindle. Machines with the designation SB...:
= Set screw driving by turning the sleeve
(5) AND set the torque (with torque limitation) by turning the sleeve (4) - intermediate settings are also possible. = Set drilling by turning the sleeve (5) (max.
torque, without torque limitation) To avoid overloading the motor, do not jam the spindle. = Set impact drilling by turning the sleeve
(5) (max. torque, without torque limitation) To avoid overloading the motor, do not jam the spindle.

6.6 Change accessory Opening the drill chuck: Turn the drill chuck sleeve (1) clockwise. Clamping the tool: Open the drill chuck and insert the tool as far as possible. Turn the drill chuck sleeve (1) in clockwise direction until the tool is clamped securely. With a soft tool shank, retightening may be required after a short drilling period.
If you have Metabo electrical tools that require repairs, please contact your Metabo service centre. For addresses see www.metabo.com
You can download spare parts lists from www.metabo.com
Observe national regulations on environmentally compatible disposal and on the recycling of disused machines, packaging and accessories. Battery packs must not be disposed of with regular waste. Return faulty or used battery packs to your Metabo dealer! Do not allow battery packs to come into contact with water!
6.7 Switching power tool on/off, setting
speed To start the machine, press the trigger (10). The speed can be changed by pressing in the trigger.
6.8 Chuck with Quick replacement system (for PowerMaxx BS Quick...) To remove: See page 2, fig. A. Push the interlock ring forward (a), advance and pull off the chuck (b). To mount: Push the interlock ring forward and move the chuck as far as the limit stop on the drill spindle.
To protect the environment, do not dispose of power tools or battery packs in household waste. Observe national regulations on separated collection and recycling of disused machines, packaging and accessories. Before disposal, discharge the battery pack in the power tool. Prevent the contacts from short- circuiting (e. g. by protecting them with adhesive tape).
6.9 Chuck (for PowerMaxx BS) See page 2, fig. B. To mount: unscrew protective cap (13). Screw the quick-clamping chuck onto the spindle thread. The quick-clamping chuck can be tightened (and released again) with an open-jawed spanner.
Explanatory notes on the specifications on page 3. Changes due to technological progress reserved. U =Voltage of battery pack n =No-load speed
When working with long screw bits or bit holders, we recommend the use of the bit clamping bush 6.31281 (see Accessories chapter).
Tightening torque for screwing: MA =soft screwing application (wood) MB =hard screwing application (metal) MC = adjustable torque (with torque control)
Use only genuine Metabo accessories. See page 4. Only use accessories which fulfil the requirements and specifications listed in these operating instructions.
Max. drill diameter: D 1 max =in steel D 2 max =in softwood D3 max= in masonry
s = max. impact rate m = weight (with battery pack) G = spindle thread
A Quick-clamping chuck.
Fitting, PowerMaxx BS: unscrew protective cap (13). Screw the quick-clamping chuck onto the spindle thread. The quick-clamping chuck can be tightened (and released again) with an open-jawed spanner. B Battery pack C Angle screwdriver attachment. D Battery charger
Measured values determined in conformity with EN 60745.
Direct current The technical specifications quoted are subject to tolerances (in compliance with the relevant valid standards).
E Bit clamping bush F Bit holder with Quick replacement system G Bit box For a complete range of accessories, see www.metabo.com or the catalogue.
Emission values Using these values, you can estimate the emissions from this power tool and compare these with the values emitted by other power tools. The actual values may be higher or lower, depending on the particular application and the condition of the tool or power tool. In estimating the values, you should also include work breaks and periods of low use. Based on the estimated emission values, specify protective measures for the user - for
Repairs to electrical tools must be carried out by qualified electricians ONLY!

example, any organisational steps that must be put in place. Vibration total value (vector sum of three directions) determined in accordance with EN 60745: ah, ID = Vibration emission value (impact drilling into concrete) ah, D = Vibration emission value (drilling into metal) ah, S = Vibration emission level (screwing without impact) Kh, ... = Uncertainty (vibration) Typical A-effective perceived sound levels:: LpA = Sound pressure level LWA = Acoustic power level KpA, KWA= Uncertainty (noise level) During operation the noise level can exceed 80 dB(A). Wear ear protectors!
Pagina's waarnaar wordt verwezen in deze handleiding — fabrikant, ondersteuning en downloads.
Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.
Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.