Gebruiksaanwijzing /service van het product WZ45NV312-0-P van de fabrikant Bosch
Ga naar pagina of 35
INSTRUCTION MANUAL Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference. WZ45N Integrated Day/Night IR Dome.
Important Safety Instructions 1. Read these instructions. 2. Keep this instruction. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean inside only with dry cloth. 7. Do not block any ventilation openings.
FCC Note NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CE Note NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to EU Standard EN55022. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures Precautions • Do not modify • Do not put objects inside the unit.
TROUBLESHOOTING Before sending the camera out for repair, check the items below. If the problem persists after checking these items, contact your service center.
If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. Service Centers USA – Repair Center – Telephone: 800-366-2283 – Fax: 800-366-1329 – E-mail: repair@us.
DIMENSIONS (mm).
*UTP OUTPUT.
INSTALLATION A B D C E F.
*UTP OUTPUT E D C A B.
INSTALLATION 1 Use the supplied security tool to remove the four fixing screws (B) of dome ring (A). 2 Align the supplied mounting template with the surface to be mounted to, make marks on the surface in the places where the screw holes and cable hole are to be located.
*UTP OUTPUT CONNECTIONS AND CAMERA SETTINGS ■ CONNECTIONS D C12V / AC24V CAUTION : Check for polarity when using a DC 12V power supply..
■ LENS ADJUSTMENTS 1. Adjust the pan (360 ˚ ) and tilt (70 ˚ ) position. 2. Adjust the twist position by loosening setscrews with supplied allen key and twist the camera module. 3. Set the zoom position by using the zoom thumb screw. 4. Set the focus by using the focus thumb screw.
■ CAMERA OPERATION LENS ALRAM MANUAL/DC E. SHUTT ER AUTO~1/100000 BLC AGC OFF ~36dB W B MODE MASK 1 AW C MASK 2 ATW MASK 3 MANUAL MASK 4 PUSH LOCK COLOR SET D&N MODE CAMERA ID AUTO TIT LE EDIT COLOR TIT LE RESET B/W TIT LE POSIT ION EX-CON T DPC SET LANGUAGE PC CONT.
*UTP OUTPUT A ccessibility ■ CAMERA OPERATION Joystick (JOY KEY) To access the OSD menu system press the joystick in, to navigate through the menus push the joystick to the appropriate side.
■ CAMERA OPERATION EXPOSURE - LENS Select the type of lens ( MANUAL / DC) DC : Select for automatic iris control. The offset brightness of the screen is adjustable by DC level. MANUAL : Select for manual iris control. The brightness of the screen is adjustable by ELC level.
EXPOSURE - E.SHUTTER This mode is selectable to either Auto or Fixed control for the electronic shutter. A UTO : Set for complete automatic operation of the electronic shutter, only available when lens iris control is set to Manual. FIXED : Set to desired minimum shutter speed, 10 levels available.
EXPOSURE - BLC (Back Light Compensation) When there is a strong backlight in the scene, change BLC in order to get a uniform image. ■ CAMERA OPERATION By selecting "BLC ON", BLC activity area and level are adjustable in 5 sections (TOP / DOWN / CENTER / RIGHT / LEFT).
■ CAMERA OPERATION COLOR - WHITE BALANCE CONTROL Screen color is adjustable in accordance with the type of ambient light on scene. A WC : Use this for color temperatures below 2500 ° C and over 9500 ° C (indoors) A TW : Use this for color temperatures between 2500 ° C and 9500 ° C (outdoors) Manual : The white balance is manually controlled.
■ CAMERA OPERATION Manual : Adjust RED or BLUE in accordance with the type of ambient light on scene..
■ CAMERA OPERATION COLOR - GAIN CONTROL Select the desired gain value. The higher the gain level, the more the scene displays that color. R-Y GAIN : Adjustment of RED color B-Y GAIN : Adjustment of Blue color ■ CAMERA OPERATION DAY & NIGHT (AUTO / COLOR / B/W) This function determines how day and night modes are handled.
■ CAMERA OPERATION FUNCTION - MIRROR If ON is selected, the horizontal image on the screen is reversed. FUNCTION - SHARPNESS The image sharpness is adjustable.
■ CAMERA OPERATION FUNCTION - GAMMA GAMMA LEVEL is selectable in 3 levels. 0.45, 0.6, 1.0. FUNCTION - SLC (SIDE LIGHT COMPENSATION) Select this mode when the corner of the screen is darker than the center.
■ CAMERA OPERATION FUNCTION - HME (High Light Masking Exposure) This function masks the bright areas on the screen. The brightness of HME is adjustable. A s the level of HME is increased, the masking area increases. FUNCTION - DRC (Dynamic Range Compensation) This function is to compensate darker images when different exposures are in one scene.
■ CAMERA OPERATION MOTION DETECTION This camera feature allows you to detect the movement of an object in 64 different areas of the screen, and display an alarm on the screen. Select or deselect blue areas with the joystick, only the blue areas are monitored for movement.
■ CAMERA OPERATION SHOW INDI : The motion detected indicator can be selected as icon, trace or off. Sensitivity level : As the sensitivity level increases, smaller movements are detected.
DELAY OUT : The alarm signal display on the screen is delayed from 1sec to 15 sec. ■ CAMERA OPERATION.
■ CAMERA OPERATION PRIVACY (PRIVACY MASKING ZONE) This function sets certain areas of the screen to be hidden. 4 masking zones are available. MASK 1 : Adjust the masking area by using the joystick. MASK 2 : Adjust the masking area by using the joystick.
■ CAMERA OPERATION ■ CAMERA OPERATION PRIVACY - COLOR SET This function is to select the color of the masking cells. SET UP - CAMERA ID Enter a camera ID as a unique identifier.
■ CAMERA OPERATION SET UP - TITLE DISPLAY Camera title is displayed on the screen when a value is entered. TITLE EDIT : Select the value TITLE RESET : Clears the title. TITLE POSITION SELECTION : Set area to display title. If editing the title, this image is displayed, select desired characters by using the joystick.
■ CAMERA OPERATION SET UP - DPC SET (Defect Pixel Cancellation) This function automatically removes dead pixels in real time. WHITE THR. : For cancelling the white defective pixels. BLACK THR. : For cancelling the black defective pixels. The cancellation sensitivity of defect pixels is adjustable.
SET UP - LANGUAGE The language of the OSD menu is selectable to either English or Chinese. ■ CAMERA OPERATION ■ CAMERA OPERATION SET UP - PC CONT. PC communication is available by setting PC CONT.
■ CAMERA OPERATION EXIT EXIT : Exit the OSD menu. SAVE & EXIT : Exit the OSD menu after saving the current setting. FACTORY SET : Change setting to the factory default. (make sure to SAVE & EXIT after) NOTE : Lens, Day & Night and ID/Title settings stay the same even after a FACTORY SET.
SPECIFICATIONS MO D E L Ge n e r a l Sp e c NT SC PA L CCD Type 1/3" 410K P ixels C ol or 1/3" 470k P ix el s C ol or T o t al n u m be r of pixe ls 811(H ) X 508 ( V ) 795(H ) X 596 ( V ) M.
Americas Bosch Security Systems, Inc. 850 Greenfield Road Lancaster, Pennsylvania 17601 USA Telephone+1 888-289-0096 Fax +1 585-223-9180 Email: security.sales@us.bosch.com www.boschsecurity.u s Europe, Middle East, Africa: Bosch Security Systems B.V. P.
Een belangrijk punt na aankoop van elk apparaat Bosch WZ45NV312-0-P (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Bosch WZ45NV312-0-P heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Bosch WZ45NV312-0-P vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Bosch WZ45NV312-0-P leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Bosch WZ45NV312-0-P krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Bosch WZ45NV312-0-P bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Bosch WZ45NV312-0-P kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Bosch WZ45NV312-0-P . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
