
REFRIGERATOR-FREEZER OPERATION MANUAL 4
FRIGORIFICO-CONGELADOR MANUAL DE MANEJO 20
FRIGORIFERO-FREEZER MANUALE DI ISTRUZIONI 36
REFRIGERATEUR-CONGELATEUR MODE D’EMPLOI 52
FRIGORÍFICO-CONGELADOR FUNCIONAMENTO MANUAL 68
ΨΥΓΕΙΟ - ΚΑΤΑΨΥΚΤΗΣ ΕΓΧΕΙΡΙΔΙΟ ΛΕΙΤΟΥΡΓΙΑΣ 84

KÜHLSCHRANK MIT TIEFKÜHLFACH BEDIENUNGSANLEITUNG 100
KOELKAST-VRIEZER GEBRUIKSAANWIJZING 116
CHŁODZIARKO - ZAMRAŻARKA INSTRUKCJA OBSŁUGI 132
HŰTŐSZEKRÉNY-FAGYASZTÓ HASZNÁLATI UTASÍTÁS 148
FRIGIDER-CONGELATOR MANUAL DE UTILIZARE 164
CHLADNIČKA-MRAZÁK NÁVOD K OBSLUZE 180
CHLADNIČKA-MRAZNIČKA NÁVOD NA OBSLUHU 196
ŠALDYTUVAS - ŠALDIKLIS EKSPLOATAVIMO INSTRUKCIJA 212
LEDUSSKAPIS – SALDĒTĀJKAMERA ROKASGRĀMATA 228
KÜLMIK-SÜGAVKÜLMIK KASUTUSJUHEND 244
Device of this mark is a trademark of Sharp Corporation. Plasmacluster is a registered trademark or a trademark of Sharp Corporation.
ХОЛОДИЛЬНИК-МОРОЗИЛЬНИК ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ 276
Un appareil de cette marque est une marque déposée de Sharp Corporation. Plasmacluster est une marque déposée inscrite ou une marque déposée de Sharp Corporation.
ХЛАДИЛНИК – ФРИЗЕР РЪКОВОДСТВО ЗА РАБОТА 292


SISUKORD
СЪДЪРЖАНИЕ

Household use only Thank you very much for buying this SHARP product. Before using your SHARP refrigerator, please read this operation manual to ensure that you gain the maximum benefi t from it.
This refrigerator is for household only, with ambient temperature between +5°C and +43°C. • The refrigerator should not be subjected to temperatures of -10°C or below for a long period of time.
This refrigerator contains fl ammable refrigerant (R600a: ■
Do not touch the compressor unit or its peripheral parts, as ■
isobutane) and insulation blowing gas (cyclopentane). Observe the following rules to prevent ignition and explosion.
they become extremely hot during operation and the metal edges may cause injury. Do not touch foods or metal containers in the freezer ■
compartment with your wet hands. This may cause frostbite. Do not use an extension cord or adapter plug. ■
Do not place bottled and canned drinks in the freezer as they ■
may crack when frozen. Make sure that the power cord has not been damaged during ■
installation or moving. If the power plug or cord is loose, do not insert the power plug. There is a risk of electric shock or fi re. Disconnect from the mains electricity supply by removing the ■
mains plug from the electricity supply socket. Do not remove by pulling the mains lead. This may cause electric shock or fi re. Should the fl exible supply cord be damaged, it must be ■
replaced by service agent approved by SHARP as a special cord is required. In case of gas leak, ventilate the area by opening a window, ■
etc. Do not touch the refrigerator or the power outlet. Do not place objects containing liquid or unsteady objects on ■
top of refrigerator. This appliance can be used by children aged from 8 years ■
ether, petrol, propane gas, aerosol cans, adhesive agents and pure alcohol etc. These materials are liable to explode. Dust deposited on the power plug may cause fi re. Wipe it off ■
and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
carefully. Do not attempt to change or modify this refrigerator. This may ■
result in fi re, electric shock or injury. Ensure that the refrigerator presents no danger to children ■
while being stored for disposal. (e.g. remove the magnetic door seals to prevent child entrapment.)

1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. Following the implementation by member states private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one. *) Please contact your local authority for further details. If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand according to local requirements. By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.

3 When right and left doors are not properly aligned, adjust
using the adjustable feet.
Do not install the refrigerator in a damp or wet location as ■
this may cause damage to the insulation and a leakage. Condensation may also build on the outer cabinet and cause rust. 1 Keep adequate ventilation space around the refrigerator.

(Until the adjustable foot on the other side is slightly off-ground.)
4 Remove the 4 screws of the cabinet lower part, and then set
the foot cover (supplied inside the refrigerator compartment) with removed 4 screws.

Screw (4 screws) Screw
refrigerator is positioned fi rmly and fl at on the fl oor.
Clean the inside parts with a cloth soaked in warm water. If soapy water is used, wipe it off thoroughly with water.
This refrigerator is provided with an indicator of temperature in the refrigerator compartment to allow you to control the average temperature in the coldest zone.
Coldest zone
The symbol indicates the coldest zone in the refrigerator compartment. (The door pocket positioned at the same height isn't the coldest zone.) Checking the temperature in the coldest zone
You can carry out regular checks to ensure the temperature in the coldest zone is correct and, if necessary, adjust the refrigerator temp. control. To maintain a correct temperature inside the appliance, check that the indicator of temperature is always BLUE. If the indicator of temperature turns WHITE, the temperature is too high; in this case, increase the refrigerator temp. control setting and wait for 6 hours before checking the indicator of temperature again.
Correct setting Temperature too high, adjust the refrigerator temp. control.



Door pockets 1. (3 pcs.) Refrigerator shelves 2. (2 pcs.) Shelf 3. Bottle pocket (left) 4. Highly sealed vegetable crisper 5. The cover of the Vegetable crisper opens as the case is pulled. Freezer cases (small) 6. (3 pcs.) Freezer cases (large) 7. (2 pcs.) Casters 8. (4 pcs.) Adjustable feet 9. (2 pcs.)
Magnetic door seals 22. (4 pcs.) Eco sign 23. When the refrigerator door is left open, the lamp will slowly change its color from blue to orange. This shows the temperature in the refrigerator is rising. Touch control panel 24. Handle indicator 25. When Plasmacluster, Energy saving and Temperature increase sign start the operation, the indicator will fl ash. Plasmacluster : Blue Energy saving : Green Temperature increase sign : Orange
Foot cover 10. Aluminum panel 11. The panel is cooled from the rear, thus indirectly cools the refrigerator compartment. In this way, food is refrigerated gently, without exposing to the cold air fl ow. Light 12. Utility pocket cover 13. Utility pocket 14. Egg holder 15. Egg pocket 16. Fruit case 17. Bottle pocket (right) 18. To store large-size bottles, move the partition all the way back. Water tank 19. Fresh case 20. Ice storage box 21. To prevent damage to the Ice storage box, do not make ice in the Ice storage box or pour oil into it.
Deodorizing unit Deodorizing catalyst is installed on the routes of cold air. No operation and cleaning are required.
More food can be stored by taking out the internal accessories with duly cooling.
11 12 12 · 1 15 16 · Partition

To operate, touch the keys with your bare hand.

Press (Enter) key. Normally, only the (Enter) key is displayed.

Sound OFF indication This indication shows sound “OFF”.
/ key Press to select feature ON/OFF or temperature setting.
Door alarm indication This indication shows door alarm “ON”.
Select key Press to select feature icon and door alarm signal.

Every time you open the door The control panel will light up to show the current setting.
At the time of re-power distribution
Operation is not accepted while the refrigerator door is open. •

Plasmacluster
The ionizer inside your refrigerator releases clusters of ions, which are collective masses of positive and negative ions, into the refrigerator compartment. These ion clusters inactivate airborne mold fungus.
It is the same method as starting operation. Select “OFF” in step 2.
1 Select “Plasmacluster icon”.
There may be a slight odor in the refrigerator. This is the smell of • ozone generated by the ionizer. The amount of ozone is minimal, and quickly decomposes in the refrigerator.
Additionally the handle indicator (Blue) will blink 3 times.
mold fungus


Use this feature when you want to switch the appliance to energy-saving operation.
Keep the ventilation space as much as possible around ■
the refrigerator. Keep your refrigerator out of direct sunlight, and do not ■
place next to heat generating appliance. Open your refrigerator door as briefl y as possible. ■
Place the food evenly on the shelves to allow the cooling ■
The amount of power consumption of this model is measured according to the international standard of the refrigerator performance under the following conditions.
All accessories in the freezer • compartment are taken out as indicated on the fi gure.
Additionally the handle indicator (Green) will blink 3 times.
It is the same method as starting operation. Select “OFF” in step 2.

Express Freezing
Use this feature when going on a trip or leaving the house for a long time.
High-quality frozen foods can be made using this feature and is convenient for home-freezing.
1 Select “Vacation mode” icon.
1 Select “Express freezing” icon.
It is the same method as starting operation. Select “OFF” in step 2.
It is the same method as starting operation. Select “OFF” in step 2.

Temperature Increase sign
Key operation of the control panel will be locked. Use this feature to prevent the panel from being used unintentionally by children or someone.
While this feature is operating, it will indicate the rise of inside temperature caused by power failure or some other malfunction.
1 Select “Child lock” icon.
Additionally the handle indicator (Orange) will blink 3 times.
It is the same method as starting operation. Select “OFF” in step 2.
Icons will blink. •
Handle indicator (orange) will blink every 30 seconds. •
How to cancel the indicator blink Press the key while the icons are blinking.
It is the same method as starting operation. Select “OFF” in step 2.

Flashing Flashing · Blink slowly

The refrigerator controls its temperature automatically. However, if needed, adjust the temperature as follows.
Freezer compartment
Adjustable between 0°C and 6°C in steps of 1°C.
Adjustable between -13°C and -21°C in steps of 1°C.
1 Select icon. The display shows the current preset temperature.
1 Select icon. The display shows the current preset temperature.
2 Set the temperature. [ : increase, : decrease ]
![Sharp SJ-FS820V — 2 Set the temperature. [ : increase, : decrease ] diagram (page 12)](/cdn/reader/17/17a770dc1622919c652d54546d06bb6776c6700d8cfe9b1d9bc80cd58c5ab36f/images/fig-12-1.webp)
![Sharp SJ-FS820V — 2 Set the temperature. [ : increase, : decrease ] diagram (page 12)](/cdn/reader/17/17a770dc1622919c652d54546d06bb6776c6700d8cfe9b1d9bc80cd58c5ab36f/images/fig-12-2.webp)
The temperature of freezer compartment and refrigerator compartment can be adjusted in steps of 0.5 °C by following steps 1 to 3 below.
Select 1. icon.
Press 2. key continuously for 3 seconds or more.
The current preset temperature on the display will be changed to 3.0 °C. (The display will be indicated like right fi gure.)
Adjust the temperature in the same way as steps 3. 2 to 3 above.
Follow steps 1 to 2 again if you want to adjust the temperature in steps of 1°C.
Select 1. icon.
Press 2. key continuously for 3 seconds or more.
The current preset temperature on the display will be changed to -18.0 °C. (The display will be indicated alternately like right fi gure.)
Adjust the temperature in the same way as steps 3. 2 to 3 above.
Follow steps 1 to 2 again if you want to adjust the temperature in steps of 1°C.

Sound ON/OFF
1 Select the door alarm indication like the below fi gure.
Press the key and key simultaneously and continuously for 3 seconds or more.

2 Select “OFF”.
Press the key and key simultaneously and continuously for 3 seconds or more again.


Use this feature when you want to switch the lighting of • control panel and handle indicator when opening the door to “ON” or “OFF”.
It is the same method as canceling operation. Select “ON” in step 2.
Press the key and key simultaneously and continuously for 3 seconds or more.

The display will be turned off.
Press the key and key simultaneously and continuously for 3 seconds or more again.
Beep beep beep · Beep beep beep · Beep

Water tank (Approx. 1.8 L)
Water is sent from the water ● tank to the ice tray.
Ice storage box
Ice tray Ice tray is located at the upper section in the back. (Unremovable)
Noise-prevention sheet To turn down the dropping sound of ice cubes. Do not throw away this sheet.
Detection lever The volume of ice cubes are checked periodically by the detection lever.
Food area Store the small frozen food.
Ice storage area Stored ice cube volume (Maximum) Normal size ice : Approx. 232 pcs. Large size ice : Approx. 112 pcs.
Ice cube volume will decrease when the ice cubes are not smoothed.
There are 5 modes you can choose as shown below. The size or the clarity of ice cube differs according to the selected mode.

Mode Icon Ice size Clarity of ice Required time for each ice making
2 types of ice cube are made at the same time. • Cube Multifaceted shape
The fi rst batch of ice cubes made right after changing the • operating mode does not refl ect the change in size or clarity. This is because there are still half-made ice cubes left in the ice tray when switching to the changed mode. Ice cubes of the 2nd batch or later will refl ect the mode change.

Ice making process indication
Ice cube process indication will change according to the completion of the ice making as follows.
Ice making is started.
At fi rst, all the ice making mode are set “OFF”. 1 Select one of the four modes.
Ice making is fi nished. The ice cubes are dropped to the ice storage box. (Control panel will light up to show the completion.) Water tank is out of water. Pour water into the water tank.

Even if the water tank is empty, the • fl ashing will be turned off by opening and closing the refrigerator doors. However, the fl ashing will restart after a short time.

4 Pull out the water tank and pour water into it.
Do not tilt the water tank ● when carrying as the water may spill.
5 Set the water tank. Securely insert the water tank. Ice ● cubes will not be made unless the tank is inserted fully.

Ice tray cleaning
You can clean the ice tray and the pipe. Use this feature at the beginning or when the refrigerator has not been used for a long time.
1 Select ice making mode which is in operation.
To start operation 1 Select ice tray cleaning icon.
2 Select “OFF”.
4 Empty the water tank. Dry it thoroughly and set into the original position.
During ice tray cleaning operation It takes about 40 sec. Do not pull out the ice storage box.
The process indication will toggle like in the above picture.
Do not put any food until the ice making process indication • turns off. Otherwise, it may break the detection lever.
4 Follow steps 2 to 3 again.
5 Finally push button. Empty the water of the ice storage box. Dry it thoroughly and set it into the original position.
Refer to “Ice making”.
Empty · ♪♪


Vegetables are improper ● in this case. They may be frozen.
Refrigeration reduces the rate of food spoilage. To maximize the shelf life of perishable food products, ensure that the food is of the freshest possible quality. The following is a general guide to help promote longer food storage.
To minimize moisture loss, fruit and vegetables should be loosely enclosed in a plastic material e.g. wrap, bags (do not seal) and place in the vegetable crisper or the fruit case. If you store a lot of vegetables, dew may form. This has no effect on the operation or the performance. Use a dry cloth to remove the dew.
Do not place food directly in front of cold air outlet. This may lead to the food freezing.
For best freezing

Defrosting
Unplug the refrigerator fi rst to prevent electric shock. ■
Defrosting is fully automatic due to a unique energy saving system.
Do not splash water directly on the outer cabinet or the ■
interior. This may lead to rusting and deterioration of the electrical insulation. IMPORTANT To prevent cracking on inside surfaces and plastic components, follow these tips.
Contact the service agent approved by SHARP to request a replacement compartment light. The compartment light is not to be removed other than by qualifi ed service personnel.
Before transporting, empty the ice tray by the following • procedure.
Empty the water tank and the ice storage box. 1 Set Ice tray cleaning mode “ON”. 2 (Refer to “Ice tray cleaning”.) About 40sec. later, empty water or ice of ice storage box 3 when you hear the ending sound.
prevent water stain or bacteria from being attached. (Once a week) 2 Remove the accessories e.g. shelves from the cabinet and
door. Wash them in warm soapy dishwashing water; rinse in clean water and dry. 3 Clean the inside with a cloth soaked in warm soapy
dishwashing water. Then, use cold water to wipe off soapy water. 4 Wipe the exterior with a soft cloth each time it is soiled. 5 Clean the Magnetic door seal with a toothbrush and warm
Wipe up water in the evaporating pan. Before wiping up the • water, wait more than 1 hour after pulling out the plug because refrigeration cycle equipment is extremely hot. (The evaporating pan is located on the rear of the product.)
soapy dishwashing water. 6 Wipe the control panel with the dry cloth.
The casters allow the refrigerator to • move back and forth.
Carry the refrigerator by holding the handles located on the • rear and bottom.

If you switch your refrigerator off when you are going away for an extended period, remove all food, clean the interior thoroughly. Remove the power cord plug from the power socket and leave all doors open.
Evaporating pan · Casters

Before you call for service, check the following points.
The outside of the cabinet is hot when touched.
It is normal. The hot pipe is in the cabinet in order to prevent dew generation.
When there is refrigerator noise. It is normal for the refrigerator to produce the following sounds.
Frosting or dew generation occurs inside or outside the refrigerator.
This may occur in one of the following cases. Use a wet cloth for wiping frost and a dry cloth for wiping dew.
Foods in the refrigerator compartment freeze.
The control panel does not work.
This may occur in one of the following cases.
Detection of full volume
Ice cubes are small, rounded or connected. There are protrusions or holes in ice cubes.
No water or ice cubes drop even when performing “Ice tray cleaning”.
Refer to your nearest service agent approved by SHARP.
Detection lever
Veelvoorkomende problemen, mogelijke oorzaken en oplossingen.
| Probleem | Mogelijke oorzaak | Oplossing | |
|---|---|---|---|
| The outside of the cabinet is hot when touched. | It is normal. The hot pipe is in the cabinet in order to prevent dew generation. | p.19 | |
| When there is refrigerator noise. | It is normal for the refrigerator to produce the following sounds. • Loud noise produced by the compressor when operation starts --- Sound becomes quieter after a while. • Loud noise produced once a day by the compressor --- Operating sound produced immediately after automatic defrost operation. • Sound of fl owing fl uid (gurgling sound, fi zzing sound) --- Sound of refrigerant fl owing in pipes (sound may become louder from time to time). • Cracking or crunching sound, squeaking sound --- Sound produced by expansion and contraction of inner walls and internal parts during cooling. | p.19 | |
| Frosting or dew generation occurs inside or outside the refrigerator. | This may occur in one of the following cases. Use a wet cloth for wiping frost and a dry cloth for wiping dew. • When the ambient humidity is high. • When the door is frequently opened and closed. • When foods containing plenty of moisture is stored. (Wrapping is required.) | p.19 | |
| Foods in the refrigerator compartment freeze. | • Is the refrigerator operated for a long time with refrigerator temp. control set at 0°C? • Is the refrigerator operated for a long time with freezer temp. control set at -21°C? • Low ambient temperatures may cause placed foods to freeze even if the refrigerator temp. control is set to 6°C. | p.19 | |
| It smells in the compartment. | • Wrapping is required for the foods with strong smell. • Deodorizing unit cannot remove all of the smell. | p.19 | |
| The control panel does not work. | This may occur in one of the following cases. • The panel or your fi nger is soiled with dripping, oil and etc. • When you touch the panel with gloved hand, adhesive bandage on your fi nger, nail or objects. • Sticker or tape is affi xed on the keys. • Touch position is slightly off from the keys. • Operate time is not enough for the keys to work. | p.19 | |
| Ice maker is not producing ice. | • Is there water in the water tank? (If there isn’t, ice making process indication will fl ash.) • Is the water tank securely set? • Have you left the shovel or other food products in the ice storage box? • Isn’t all the ice making mode set at “OFF”? Detection • Are the ice cubes piled up at the back of the lever ice storage box? (Spread out the ice cubes evenly.) • Try the ice tray cleaning. If the ice tray cleaning works properly, leave for a day. You Detection of full volume may get ice again. | p.19 | |
| Ice cubes are made slow | • Has the ice making operation just been restarted? • Is it just after refi lling the tank with potable water? | p.19 | |
| Ice cubes are small, rounded or connected. There are protrusions or holes in ice cubes. | • Ice cubes may become small or connected to each other, especially just before or after changing or refi lling the tank. • If you store ice cubes for a long time, they may become smaller, rounded, lumped together. • The protrusions you see may come from the slits in the ice tray. • The holes come from air bubbles in ice cubes which may be lumped together and form bigger holes. | p.19 | |
| Ice cubes have some odor. | • Is the water in the water tank old or with some odor? • Is there remaining detergent or bleach in the water tank used for cleaning the water tank? • If ice cubes has been left unused for a long time, odors may transfer to the ice cubes. | p.19 | |
| No water or ice cubes drop even when performing “Ice tray cleaning”. | • Is the ice storage box full with ice cubes? Have you left the shovel or other food products in the ice storage box? (Empty the ice storage box.) • Is there water in the water tank? | p.19 |
Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.
Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.