Gebruiksaanwijzing /service van het product Matinee 1HD van de fabrikant BOXLIGHT
Ga naar pagina of 52
Matinee 1HD HOME THEA TER PR OJECT OR USER'S GUIDE.
2 T able of Contents T able of Contents 2 P ar t Names and Functions 9 Video Input 24 Computer Input / (RGB Scart 21-Pin Video Input) 31 Setting 42 Appendix 44 T o the Owner 3 Feature and Design 8 Fro.
3 C AU TI O N : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
4 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners.
5 Safety Instructions CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR ● Do not drop or bump a projector, otherwise damages or malfunctions may result. ● When carrying a projector, use a suitable carrying case. ● Do not transport a projector by using a courier or transport service in an unsuitable transport case.
6 Compliance The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. A C P ower Cor d for the United States and Canada : AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).
7 Compliance This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system.
8 Feature and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
9 Part Names and Functions Front PROJECTION LENS FRONT COVER INFRARED REMOTE RECEIVER TOP CONTROLS AND INDICATORS AIR INTAKE VENTS EXHAUST VENTS FOCUS RING ZOOM LEVER LENS SHIFT RING (LEFT/RIGHT) LENS SHIFT RING (UP/DOWN) CA UTION This projector is equipped with Cooling Fans for protection from overheating.
10 Part Names and Functions Bottom Back CAUTION Hot air is exhausted from the exhaust vents. When using or installing the projector, the following precautions should be taken. ● Do not put any flammable objects near these vents. ● Keep front grills at least 3’(1m) away from any objects, especially heat-sensitive objects.
11 Part Names and Functions Connect the S-VIDEO output from video equipment to this jack. (Refer to page 17.) S-VIDEO INPUT JACK Connect the computer output to this jack. (Refer to page 18.) COMPUTER INPUT TERMINAL * SERVICE PORT JACK This jack is used to service the projector.
12 W ARNING TEMP . LAMP REPLACE READ Y LAMP MENU INPUT ON-OFF SELECT Part Names and Functions Used to open or close the on-screen menu. (p22) MENU BUTTON READY INDICATOR SELECT BUTTON POWER ON–OFF BUTTON INPUT BUTTON WARNING TEMP.
13 ON-OFF KEYSTONE MENU SCREEN AUT O PC ADJ. AU TO NO SHOW IMA GE INPUT LIGHT SELECT 1 2 3 4 IMA GE AUT O VIDEO S-VIDEO COMPO COMPONENT VIDEO Part Names and Functions AUTO PC ADJ. BUTTON Used to operate Auto PC Adjustment function. (p34) IMAGE BUTTON Used to select image level.
14 Part Names and Functions To insure safe operation, please observe the following precautions: ● Use (2) AA, UM3 or R06 type alkaline batteries. ● Replace two batteries at the same time. ● Do not use a new battery with a used battery. ● Avoid contact with water or liquid.
15 Installation P ositioning the Projector Tilting the Pr ojector Picture tilt and projection angle can be adjusted by rotating the Adjustable feet. Projection angle can be adjusted up to 11.8 degrees with the Adjustable feet. Lift the front of the projector and pull the Feet lock latches on both sides of the projector.
16 Installation The Projection lens can be moved up and down with manual lens shift function. This function makes it easy to provide a projected image where you want.
17 Installation Video Source (example) Video Cassette Recorder Video Disc Player Video Cable (RCA x 1) S-VIDEO Cable Terminals of the Projector NOTE When selecting the video input with the "AUTO&.
18 Installation ON 1 DIP ON OFF 2 3 4 5 6 13" MODE (640 x 480) 16" MODE (832 x 624) 19" MODE (1024 x 768) OFF ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 12 3 4 5 6 OF.
19 T urning On the Projector Connect the projector's AC Power Cord into an AC outlet, and open the front cover. Turn the MAIN ON/OFF switch on. The LAMP indicator lights red, and the READY indicator lights green. The READY indicator does not light green with the front cover closed.
20 Basic Operation Zoom Adjustment Focus Adjustment Move the ZOOM LEVER upward to make the image larger. Move the ZOOM LEVER downward to make the image smaller.
21 Basic Operation Ke ystone Adjustment 1 Press the KEYSTONE ▲ / ▼ button on the remote control or select the Keystone in the Setting menu. (Refer to page 42.) The Keystone dialog box appears. 2 Correct keystone distortion by pressing the KEYSTONE ▲ / ▼ button or the POINT UP/DOWN button.
22 Basic Operation On-Screen Menu MENU POINT RIGHT BUTTON ITEM Display the on-screen menu by pressing the MENU button on the top control or the remote control. A main menu appears. 1 Main menu Select an item by pressing the POINT UP/DOWN button, and activate the item that you have selected by the , , or button.
23 Basic Operation Contents of Menus VIDEO MENUS COMPUTER MENUS INPUT SOURCE SELECTION: select input source either Video [Auto, Video, S-Video, (Y-Pb/Cb-Pr/Cr)] or Computer. (Refer to page 24, 25.) VIDEO SYSTEM SELECTION: select Video system from AUTO, PAL, SECAM, NTSC, NTSC4.
24 V ideo Input Input Sour ce Selection (Direct Operation) You can select Video input or Computer input with the INPUT button. (The input source that was selected last is selected when the projector is turned on.) If the projector cannot reproduce proper video source, select correct input source through menu operation on the next page.
25 Video Input Input Sour ce Selection (Menu Operation) Press the MENU button, and the main menu appears. Select the Input Source Selection menu with the POINT UP/DOWN button, and then press the POINT RIGHT button to enter the sub-menu. Choose Video with the POINT UP/DOWN button and press the POINT RIGHT button.
26 Video input Video System Selection menu (VIDEO / S-VIDEO) Press the MENU button, and the main menu appears. Select the Video System Selection menu with the POINT UP/DOWN button, and then press the POINT RIGHT button to enter the sub-menu.
27 Video Input Image Level Selection (Men u Operation) Press the MENU button, and the main menu appears. Select the Image Level Selection menu with the POINT UP/DOWN button, and then press the POINT RIGHT button to enter the sub-menu.
28 Video Input Press the MENU button, and the main menu appears. Select the Image Level Adjustment menu with the POINT UP/DOWN button, and then press the POINT RIGHT button to enter the sub-menu. 1 2 Choose the item that you want to adjust with the POINT UP/DOWN button, and then press the POINT LEFT/RIGHT button to adjust each item.
29 Video Input Press the POINT LEFT button to decrease contrast and the POINT RIGHT button to increase contrast. (From 0 to 63.) Press the POINT LEFT button to adjust image darker and the POINT RIGHT button to adjust image brighter.
30 Video Input This projector has a picture screen resize function, which enables you to display the desirable image size. NOTE : The Screen Size Adjustment cannot be operated when “ 720p, ” “ 1035i, ” or “ 1080i ” is selected in the Video System Selection menu (p26).
31 Computer Input / (RGB Scart 21-Pin Video Input) Input Sour ce Selection (Menu Operation) Press the MENU button, and the main menu appears. Select the Input Source Selection menu with the POINT UP/DOWN button, and then press the POINT RIGHT button to enter the sub-menu.
32 Computer Input This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, or SXGA in most cases (refer to “ Compatible Computer System ” on the next page). When selecting Computer, this projector automatically tunes to incoming signal and projects proper image without any special settings.
33 Computer Input Compatible Computer System Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 100 MHz of Dot Clock. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.
34 Computer Input Computer Adjustment (A uto) (Menu Operation) The Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to your computer. The Auto PC Adjustment function can be operated as follows.
35 Computer Input Computer Adjustment (Manual) This projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be tuned by Multi- Scan system of this projector.
36 Computer Input To store adjustment data. To clear adjustment data. Choose one of the positions from the Mode 1 to 5 where you want to store with the POINT UP/DOWN button, and press the SELECT button. Select "Yes" with the SELECT button and close the menu by pressing the SELECT button at the Quit.
37 Computer Input Adjustment of horizontal area displayed by the projector. Press the POINT LEFT/RIGHT button to decrease/increase value to match the resolution of image. Display area H Adjustment of vertical area displayed by the projector. Press the POINT LEFT/RIGHT button to decrease/increase value to match the resolution of image.
38 Computer Input Image Level Selection (Men u Operation) Press the MENU button, and the main menu appears. Select the Image Level Selection menu with the POINT UP/DOWN button, and then press the POINT RIGHT button to enter the sub-menu.
39 Computer Input Press the MENU button, and the main menu appears. Select the Image Level Adjustment menu with the POINT UP/DOWN button, and then press the POINT RIGHT button to enter the sub-menu. 1 2 Choose the item that you want to adjust with the POINT UP/DOWN button, and then press the POINT LEFT/RIGHT button to adjust each item.
40 Computer Input Press the POINT LEFT button to decrease contrast and the POINT RIGHT button to increase contrast. (From 0 to 63.) Press the POINT LEFT button to adjust image darker and the POINT RIGHT button to adjust image brighter.
41 Computer Input This projector has a picture screen resize function, which enables you to display the desirable image size. When Digital zoom is selected, the on-screen menu disappears and the message “ D.Zoom ” is displayed. Press the SELECT button to expand the image.
42 SETTING Keystone When the image is distorted vertically, select the Keystone. The on- screen menu disappears and the Keystone dialog box is displayed. Correct keystone distortion by pressing the POINT UP/DOWN button. Refer to Keystone Adjustment on page 21.
43 Setting This function turns the Projection lamp off when this projector detects signal interruption and is not used for a certain period in order to reduce power consumption and maintain the lamp lifetime. (This projector is shipped with this function ON.
44 Appendix Lamp Replacement When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. ORDER REPLA CEMENT LAMP Replacement Lamp can be ordered through Boxlight at 1-800-762-5757 or 360-779-7901.
45 Appendix Lamp Replace Counter Be sure to reset the Lamp Replace Counter after the Lamp assembly is replaced. After the Lamp Replace Counter is reset, the LAMP REPLACE indicator stops lighting. NOTE : Do not reset the Lamp Replace Counter before the Projection lamp is replaced.
46 Appendix Cleaning the Pr ojection Lens Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch a surface. When the projector is not in use, close the front cover.
47 Appendix Before calling your dealer or service center for assistance, check the following: • Make sure you have connected the projector to video equipment or your computer as described on page 17 and 18. • Check cable connection. Verify that all video, computer, and power cord are properly connected.
48 Appendix If the problem still persists after following all operating instructions, contact the dealer where you purchased the projector or the service center. Give the model number and explain the difficulty. We will advise you how to obtain service.
49 Appendix 0.7" Wide TFT Active Matrix type, 3 panels Multi-media Projector 7.5lbs (3.4 kg) 13.11" x 4.27" x 9.70" (333mm x 108.5mm x 246.5mm) (not including Adjustable Feet) 964 x 544 dots 1,573,248 (964 x 544 x 3 panels) PAL, SECAM, NTSC, NTSC4.
50 Appendix WARNING TEMP . LAMP LAMP REPLACE READ Y LAMP LAMP MENU INPUT ON-OFF SELECT Unit : inch (mm) 13.11 (333) 9.70 (246.5) 4.27 (108.5) 11.8 ˚ (Max.
51 Appendix Configuration of T erminals COMPUTER INPUT TERMINAL (ANALOG) Terminal : HDB15-PIN 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 No Connect Horiz.
Printed in Japan Part No. 610 304 4927 (1AA6P1P3782-- M4JE) LIMITED W ARRANTY BOXLIGHT Corporation ( “ BOXLIGHT ” ) warrants that each Matinee 1HD ( “ the Product ” ) sold hereunder will conform to and function in accordance with the written specifications of BOXLIGHT.
Een belangrijk punt na aankoop van elk apparaat BOXLIGHT Matinee 1HD (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen BOXLIGHT Matinee 1HD heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens BOXLIGHT Matinee 1HD vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding BOXLIGHT Matinee 1HD leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over BOXLIGHT Matinee 1HD krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van BOXLIGHT Matinee 1HD bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de BOXLIGHT Matinee 1HD kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met BOXLIGHT Matinee 1HD . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
