

EN ES DE FR IT PL NL RU
Product images are for illustration purposes only. Actual product may vary.



Important safety instructions
DO NOT OPEN
Please, read these safety instructions and respect the following warnings before the appliance is operated:
The lightning fl ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi cient magnitude as to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
This symbol means that the product should be disposed of in an environmentally friendly manner and not with general household waste.
In order to prevent fi re always keep candles and other open fl ames away from this product.
Batteries
AC voltage · DC voltage · Class II equipment

CE Statement:
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,. Inc.


1 x Main unit 2 x Speaker 1 x Remote control 2 x AAA battery 1 x User guide 1 x Quick start guide 1 x Power cord
STANDBY: press to turn on or enter standby. 2. FM: Press this to enter FM mode. 3. AUX: Press this to enter Aux mode. 4. USB: Press this to enter USB mode. 5. MUTE: Press this to mute the sound, press again or press + or - button to resume. 6. FAST FORWARD: Press this to fast forward the track that is currently playing. 7. PREVIOUS: Press this to skip to the previous track/saved station. 8. FAST REWIND: Press this to fast-rewind the track that is currently playing. 9. STOP: In CD/USB mode, press to stop playback. 10. BASS +: Press this button increase the bass. 11. BASS -: Press this button decrease the bass. 12. REPEAT: Press to repeat song in CD mode. 13. RANDOM: Press this to play music in a random order. 14. EQ: Press this to select the sound equalizer pre-set. 15. FREQ: Frequency: in FM mode, press to enter a frequency manually. 16. CD: Press this to enter CD mode. 17. BLUETOOTH: Press this to enter Bluetooth mode. 18. BLUETOOTH disconect: Press to disconnect a paired Bluetooth device. 19. BLANK: no function 20. NEXT: Jump to next track/saved station. 21. PLAY/PAUSE: Start or pause the playback 22. EJECT: Press to open/close CD drawer (in CD mode). 23. VOLUME +: Press this to increase volume. 24. TREBLE +: Press this button to increase the treble. 25. TREBLE -: Press this button to decrease the treble. 26. VOLUME -:Press this to decrease volume. 27. PROGRAM: Used this to program the playback order. 28. MO/ST: In FM mode, press to switch stereo on/off . 29. LOUD: Press "delete" to increase the level of bass at low volume levels.


Fitting or replacing the remote control batteries 1. To open the battery compartment, push your thumb down on to the circle on the battery compartment cover and slide it down.
Preparation for use
Switching modes To switch between the modes: CD, FM, Bluetooth, USB and AUX IN, press SOURCE button on the unit or the corresponding button (FM, CD, , AUX, USB) on the remote control.
Volume control 1. Increase: Rotate the VOLUME control on the main unit clockwise or press the VOL+ button on the remote.
EQ eff ects Press the EQ button on the remote repeatedly to cycle through a set of equaliser presets to adjust the sound. Choose from CLASSIC, ROCK, POP, JAZZ, DANCE, LIVE and Off .
Loudness function This function will increase the level of bass at low volume levels. Press the LOUD button on remote to enable the eff ect. Press again to disable the eff ect.
Mute function Press the button at any time to mute the sound output. Press again to unmute.
AUDIO IN
Tone controls To adjust the bass, use the BAS+ or BAS- buttons on the remote control. To adjust the treble, use the TRE+ or TRE- buttons on the remote control.
Standby mode Press the STANDBY button on the unit or the remote to put the system into standby mode. To resume normal operation, press this button again.
Place a speaker on either side of the main unit, preferably at the same height and with at least 150mm space between each speaker to the main unit. Connect the speaker plugs to the rear of the unit. Take care to match the speaker placed to the LEFT to the LEFT output on the rear of the unit. Repeat for the RIGHT speaker.

– Press the FREQ button and then, using the number
buttons enter the frequency that you want to store. – Press the SAVE button, it will show " P01" on the display.

– Press the / button to select the station preset number you want to save the frequency under. – Press the SAVE button again to confi rm. 6. Recall the preset stations:
It is possible to listen to music via the USB device interface of the unit. Connecting a USB device: 1. Switch the unit on and select USB mode by pressing the SOURCE button.
– If the track number consists of two digits, for example 25, press
button “2“, and then button “5“ to select the 25th track. – If the track number is a one digit number, for example
9, press “0“ fi rst, then “9“ to skip to the 9th track. 7. REPEAT button: While in playing mode, press the button to set repeat mode.
– For CD and CD-R discs, press the button to repeat playing songs. – Press once to repeat current song. Press again to repeat all tracks. – Press a third time to cancel. 8. Press the button on the remote control to play the tracks in a random order. Press again to resume.
– MP3 format is supported. – Unsupported fi le formats are skipped. For example, Word documents
(.doc) or MP3 fi les with extension .dlf are ignored and not played – Even when the fi les are in a supported format (MP3), some
may not play or display depending on the compatibility. – In some case, reading may be as long as 60
– Press the button on remote control to stop playing. – Press the PROGRAM button on remote
seconds, this is not a malfunction. – Depending on the amount of data and media speed, it
may take longer for the unit to read the USB device. – The maximum USB memory size is 32GB. – USB memory device must be formatted in FAT, FAT16 or FAT32
to select the tracks to program. – Press the / buttons on remote control to skip between the program tracks. – Press the PROGRAM button on the remote control to confi rm. – To begin the programmed order, press the button. – To cancel the program sequence, press the button twice.
– MP3 format is supported. – Unsupported fi le formats are skipped. For example, Word documents
(.doc) or MP3 fi les with extension .dlf are ignored and not played.
The Micro system has Bluetooth capability and is able to receive a signal within a range of 7 metres. To pair the Micro system with a Bluetooth device: 1. Press the source button on the unit, or button on the remote control button repeatedly to enter the Bluetooth mode, the“bt“ message appear and fl ash on the display.


Pagina's waarnaar wordt verwezen in deze handleiding — fabrikant, ondersteuning en downloads.
Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.
Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.