NL
Aeotec logo
Officiële handleiding

Aeotec Multipurpose Sensor

4 pagina's·126 KB·Sensor·PDF·EN
Aeotec Multipurpose Sensor
Inhoudsopgave 5 secties Familiarize yourself with Aeotec Multipurpose Sensor · Connect the Aeotec Multipurpose Sensor · Using Aeotec Multipurpose Sensor · How to remove Aeotec Multipurpose Sensor from Aeotec Smart Home Hub · … TonenVerbergen
Page 1 of the Aeotec Multipurpose Sensor user manual
Pagina 1 · klik om te vergroten
Pagina 1

Aeotec Multipurpose Sensor user guide Modified on: Tue, 24 Nov, 2020 at 2:41 AM

Aeotec Multipurpose Sensor diagram (page 1)
Afb. 1

Aeotec Multipurpose Sensor was developed to detect open/close of door/windows, temperature, and vibration while it is connected to Aeotec Smart Home Hub. It is powered by Aeotec Zigbee technology. Aeotec Multipurpose Sensor must be used with a compatible ZigBee Gateway, like Aeotec Smart Home Hub, in order to work.

Page 2 of the Aeotec Multipurpose Sensor user manual — Using Aeotec Multipurpose Sensor
Pagina 2 · klik om te vergroten
Pagina 2

Familiarize yourself with Aeotec Multipurpose Sensor

Package contents:

1. Aeotec Multipurpose Sensor 2. User manual 3. Health and safety guide 4. Magnetic ball mount 5. 3M adhesive strips 6. 1x CR2032 battery
  • Read, keep, and follow these instructions. Heed all warnings.
  • Clean only with a dry cloth.
  • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce hear.
  • Only use attachments and accessories specified by the Manufacturer.

Connect the Aeotec Multipurpose Sensor

Video link: https://youtu.be/-EY_XxvfUDU Steps in SmartThings Connect.

  • 1. From the Home screen, tap the Plus (+) icon and select Device. 2. Select Aeotec and then Multipurpose Sensor (IM6001-MPP) . 3. Tap Start. 4. Choose a Hub for the device. 5. Choose a Room for the device and tap Next. 6. While the Hub searches:
  • Pull the “ Remove when Connecting ” tab found in the sensor.
  • Scan the code on the back of the device.

Using Aeotec Multipurpose Sensor

Aeotec Multipurpose Sensor is now a part of your Aeotec Smart Home Hub network. It will appear as an Open/Close widget that can display open/close status or temperature sensor readings.

Page 3 of the Aeotec Multipurpose Sensor user manual — Factory reset your Aeotec Multipurpose Sensor
Pagina 3 · klik om te vergroten
Pagina 3

This section will go over how to display all information in your SmartThings Connect app.

Steps in SmartThings Connect.

  • 1. Open SmartThings Connect 2. Scroll down to your Aeotec Multipurpose Sensor 3. Then tap Aeotec Multipurpose Sensor widget . 4. On this screen, it should display:
  • Open/Close
  • Temperature

You may use Open/Close and Temperature sensor in an Automation to control your Aeotec Smart Home Hub home automation network.

How to remove Aeotec Multipurpose Sensor from Aeotec Smart Home Hub

If your Aeotec Multipurpose Sensor is not performing as you expected, you'll likely need to reset your Multipurpose Sensor and remove it from Aeotec Smart Home Hub to begin a fresh start. Steps

1. From the Home screen, select Menu 2. Select More Options (3 dot icon) 3. Tap Edit 4. Tap Delete to confirm

Factory reset your Aeotec Multipurpose Sensor

Aeotec Multipurpose Sensor can be factory reset at any time if you come across any issues, or if you need to re-pair Aeotec Multipurpose Sensor to another hub.

Video link: https://youtu.be/yT3iVHuO7Qk Steps in SmartThings Connect.

1. Press and Hold the recessed connect button for five (5) seconds. 2. Release the button when the LED starts blinking red. 3. The LED will blink red and green while attempting to connect. 4. Use the SmartThings app and steps detailed in "Connect the Aeotec Multipurpose Sensor" above.
Page 4 of the Aeotec Multipurpose Sensor user manual — How to remove Aeotec Multipurpose Sensor from Aeotec Smart Home Hub
Pagina 4 · klik om te vergroten
Pagina 4

Aeotec Multipurpose Sensor technical specifications Modified on: Wed, 17 Feb, 2021 at 9:41 PM

This page lists Aeotec product technical specifications for Aeotec Multipurpose Sensor. Name: Aeotec Multipurpose Sensor Model number: EU: GP-AEOMPSEU US: GP-AEOMPSUS AU: GP-AEOMPSAU Hardware required: Aeotec Smart Home Hub Software required: SmartThings Connect (iOS or Android) Radio protocol: Zigbee3 Power supply: No Battery charger input: No Battery type: 1 * CR2450 Radio frequency: 2.4 GHz Sensor:

Open/Close Temperature Vibration Indoor/Outdoor use: Indoor only Operating distance:

50. 100 ft 15.2 - 40 m

Dimension of Button:

1.72 x 2.04 x 0.54 in 43,8 x 51,9 x 13,7 mm Weight:

39 g 1.44 oz

Bronnen

Referenties en links

Pagina's waarnaar wordt verwezen in deze handleiding — fabrikant, ondersteuning en downloads.

Vraag stellen over de Aeotec Multipurpose Sensor

Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Nog geen vragen over de Aeotec Multipurpose Sensor

Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.

Origineel document

Aeotec Multipurpose Sensor handleiding-pdf

4 pagina's·126 KB·Sensor·PDF
Klik op een bovenstaande pagina om deze hier te openen
Pagina 1 / …
100%
Pagina's laden…