


Features & Specifi cations
< 6 lbs. (2.7 kg) 0.85" - 2.3" (22-58 mm)
IMPORTANT! This product adds an additional 2 lbs. (1 kg) to your mounting solution. When mounting between a monitor and VESA plate, the mounting solution's monitor weight capacity must be reduced by 2 lbs. (1 kg) when using standard monitors and thin clients which when combined are less than or equal to 2.5" (64 mm) thick. Additional reduction will be required if the combined monitors and thin client are greater than 2.5" (64 mm) thick.
For the latest User Installation Guide please visit: www.ergotron.com
User's Guide - English Guía del usuario - Español Manuel de l’utilisateur - Français Gebruikersgids - Deutsch Benutzerhandbuch - Nederlands Guida per l’utente - Italiano Användarhandbok - svenska ユーザーガイド : 日本語 用户指南 : 汉语





Install Portrait/Landscape rotation stop screw. Insert the provided washer and one of the three provided rotation stop screws : M3x10 mm, M3.5x8mm, or M4x10mm depending on the diameter of the hole in your VESA plate.

M3 x 10mm M4 x 10mm M3.5 x 8mm

Attach bracket shown to VESA mount.





Attach Thin Client.
Secure Thin Client. a. Loosen knobs. b. Push brackets together. c. Tighten knobs with pliers as needed.

If you are using the strap and buckle, clip buckle together and tighten strap.



Attach bracket shown to Wall Track bracket. NOTE: Leave enough space between brackets to allow sliding onto Wall Track.

Attach brackets to Wall Track.
Tighten screws to secure brackets to Wall Track at desired height.



a. Attach Thin Client to brackets. Secure Thin Client. b. Loosen knobs. c. Push brackets together. d. Tighten knobs with pliers as needed.
If you want to use the optional strap and buckle: a. Wrap the strap around the brackets and Thin Client then clip buckle together. b. Tighten strap.



a. Attach bracket shown to pole and pole clamp. b. Attach brackets.



a. Attach Thin Client to brackets. Secure Thin Client. b. Loosen knobs. c. Push brackets together. d. Tighten knobs with pliers as needed.

If you want to use the optional strap and buckle: a. Wrap the strap around the brackets and Thin Client then clip buckle together. b. Tighten strap.




Mark mounting holes in desired location using bracket shown.
Drill holes. TIP: To ensure proper depth, place a piece of tape on the drill bit 0.75" (19 mm) from the tip.



Attach bracket shown.


Attach brackets.




Attach Thin Client.

Secure Thin Client. a. Loosen knobs. b. Push brackets together. c. Tighten knobs with pliers as needed.


If you are using the optional strap and buckle: a. Wrap the strap around the brackets and Thin Client then clip buckle together. b. Tighten strap.

Set Your Workstation to Work For YOU!

Learn more about ergonomic computer use at: www.computingcomfort.org
Height Position top of screen slightly below eye level. Position keyboard at about elbow height with wrists fl at. Distance Position screen an arm's length from face—at least 20” (508mm). Position keyboard close enough to create a 90˚ angle in elbow. Angle Tilt screen to eliminate glare. Tilt the keyboard back 10° so that your wrists remain fl at.
For local customer care phone numbers visit: http://contact.ergotron.com

Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.
Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.