

HyperX Cloud Orbit Software
Find the language and latest documentation for your HyperX Cloud Orbit Software here.
For instructions in English
Para instrucciones en Español
Für Anleitungen in Deutsch
Pour des instructions en Français
Per le istruzioni in Italiano
Por as instruções em Português
Instrukcje w jezyku Polskim
Для инструкции на Pусском
Turkce talimatlar icin
日本語マニュアル用
한국어 안내
ค ำ௭แนะน ำ௭ภ௭ษ௭ไทย
Để xem hướng dẫn bằng tiếng Việt
Simplified Chinese 简体中文说明书
Traditional Chinese 繁體中文說明

HX-HSCOS-GM/WW
Document No. 480HX-HSCOS.A01 HyperX Cloud Orbit Software Page 1 of 13




Headset on/off, battery level, microphone level, USB connection
*Available only on Orbit S
Document No. 480HX-HSCOS.A01 HyperX Cloud Orbit Software Page 3 of 13
gesture controls


This page allows you to adjust the HRTF settings to fine tune the 3D sound to your personal
preferences.
Adjust slider to match the circumference of your head in inches.
Adjust slider to match the circumference of one ear canal to the other, measured around
the back of your head, in inches.
Adjust slider to control the amount of reverb in the 3D audio.
Document No. 480HX-HSCOS.A01 HyperX Cloud Orbit Software Page 4 of 13


This page allows you to configure head gesture controls and profiles for the headset*. Headset must be
set to 3D Manual mode for correct behavior.
a. Look down, look up, nod up/down
a. Turn left, turn right, shake left/right
a. Tilt left, tilt right, nod left/right
*Available only on Orbit S
Document No. 480HX-HSCOS.A01 HyperX Cloud Orbit Software Page 5 of 13

Adding a Gesture Profile



Deleting a Gesture Profile
Document No. 480HX-HSCOS.A01 HyperX Cloud Orbit Software Page 6 of 13

Binding a Press and Hold Key Function to a Head Gesture

a. Alphanumeric characters, Shift, Alt, Ctrl, F1-F12, and top row numbers are supported
key functions. Numpad keys are not supported.
while the head gesture motion is held.
a. Example: Move headset pitch up -8 degrees to press and hold “R” key.

Document No. 480HX-HSCOS.A01 HyperX Cloud Orbit Software Page 7 of 13

Binding a Press and Release Key Function to a Head Gesture
border will appear around the key function box.
a. Alphanumeric characters, Shift, Alt, Ctrl, F1-F12, and top row numbers are supported
key functions. Numpad is not supported.
pressed and released when performing the head gesture.
a. Example: Move headset pitch up -8 degrees to press and release “R” key.

Document No. 480HX-HSCOS.A01 HyperX Cloud Orbit Software Page 8 of 13

Changing the Head Gesture Sensitivity

degrees.

Document No. 480HX-HSCOS.A01 HyperX Cloud Orbit Software Page 9 of 13

Binding a Key Function to a Twitch Mode Head Gesture
gesture.
a. Enabling “Twitch Mode” will disable the independent gesture actions from the gesture
category (i.e. Enabling nod left/right twitch gesture will disable tilt left and tilt right).

follow the binding type (press and hold, press and release).
a. Example: Tilt headset to the left above +30 degrees, then tilt headset to the right below
+30 degrees to press and hold “M” key.

Document No. 480HX-HSCOS.A01 HyperX Cloud Orbit Software Page 10 of 13


This page allows you to select your desired EQ preset to change the sound profile of the headset.
Flat No EQ applied.
Default Tuned to the Audeze House curve.
Foot Steps Enhances sounds of foot steps.
Ballistics Enhances gunshots and other ballistic sounds in FPS games.
Music Optimized for listening to music.
Racing Optimized for racing games.
RPG Optimized for RPGs and immersive games.
Warm Treble is cut and bass is boosted slightly.
Document No. 480HX-HSCOS.A01 HyperX Cloud Orbit Software Page 11 of 13
EQ Preset Description


This page provides general information on the Orbit / Orbit S headset.
Document No. 480HX-HSCOS.A01 HyperX Cloud Orbit Software Page 12 of 13


This page provides the firmware versions on Orbit / Orbit S and the ability to update the headset
firmware.
Document No. 480HX-HSCOS.A01 HyperX Cloud Orbit Software Page 13 of 13

HX-HSCOS-GM/WW
Documento n.º 480HX-HSCOS.A01 Software HyperX Cloud Orbit Página 1 de 13


Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.
Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.