







30mm
35mm
20mm 7.5mm 5.5mm 20mm
13mm



Use any end of the 8-pin JST cable to connect the FC to the ESC.



/ /+ /

( ) ( )

( )
( ) ( )

( )
RED LED - Solid Red after powering up.
GREEN LED - Blinking Green indicates Bluetooth is open and waiting forconnection; Solid Green indicates Bluetooth is connected.
BLUE LED - Flight controller status light which is controlled by the flight controller firmware.
Only if the flight controller gets bricked and can’t power up, please follow these steps to re-flash firmware for it:
① Insert a USB A to TYPE-C cable to your PC.
② Press and hold the BOOT button, insert the USB cable into the flight controller, then release the BOOT button.
③ Open Betaflight/Emuflight/INAV configurator on the PC, go to the ‘Firmware Flashing’ page, choose the target ‘SPEEDYBEEF7MINI’ and flash.



Get the SpeedyBee App Search ‘SpeedyBee’ on Google Play or App Store. Or download the Android .apk file on our website: https://www.speedybee.com/download Connect the App




SpeedyBee F7 Mini does not support wireless firmware flashing, so please flash firmware for it on your PC following the steps below:
② Open Betafight/Emuflight/INAV configurator on your PC. Take Betaflight configurator as an example, go to the ‘Firmware Flashing’ page, choose the target ‘SPEEDYBEEF7MINI’ and flash.




+
-
+
-
( )












You could flash both BLHeli_S and Blue Jay firmware for this ESC via Bluetooth.Note: ESC Type should be set as ‘J-H-40’.

J_H_40

( )
/
( ==)
( )*( )*()
Pagina's waarnaar wordt verwezen in deze handleiding — fabrikant, ondersteuning en downloads.
Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.
Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.