

EN FR DE ES IT RU PL NL
Product images are for illustration purposes only. Actual product may vary.



DO NOT OPEN
Please, read these safety instructions and respect the following warnings before the appliance is operated:
The lightning fl ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi cient magnitude as to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
This symbol means that the product should be disposed of in an environmentally friendly manner and not with general household waste.
In order to prevent fi re always keep candles and other open fl ames away from this product.
Batteries
AC voltage · DC voltage · Class II equipment

CE and UKCA statement:
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,. Inc.


1 x Main unit 2 x Speaker 1 x Remote control 2 x AAA battery 1 x User guide 1 x Quick start guide 1 x Power cord
STANDBY: Press to turn on the unit or enter Standby mode. 2. DAB/FM: Press to select DAB mode, press again to select FM mode. 3. AUX/USB: Press to select AUX mode, press again to select USB mode. 4. MENU: Press to enter or exit Menu. 5. MUTE: Press to mute the sound, press again or press VOL+ or VOL- to resume. 6. FAST FORWARD: Press to fast forward the track that is currently playing. 7. PREVIOUS: Press to skip to the previous song/saved station. 8. FAST REWIND: Press to fast-rewind the song that is currently playing. 9. STOP: In CD/USB mode, press to stop playback. 10. BASS +: Press to increase the bass. 11. BASS -: Press to decrease the bass. 12. REPEAT: Press to repeat song in CD mode. 13. RANDOM: Press to play music in a random order. 14. EQ: Press repeatedly to select the sound equaliser pre-set. 15. FREQ: Frequency: in FM mode, press to enter a frequency manually. 16. CD: Press to enter CD mode. 17. BLUETOOTH: Press to enter Bluetooth mode. 18. BLUETOOTH disconect: Press to disconnect a paired Bluetooth device. 19. INFORMATION: Press repeatedly to cycle through information displays relating to the audio source/mode. When in the MENU, press the button to return the previous MENU level. 20. NEXT: Press to skip to next song/station. 21. PLAY/PAUSE: Start or pause the playback 22. EJECT: Press to open/close CD drawer (in CD mode). 23. VOLUME +: Press to increase volume. 24. TREBLE +: Press to increase the treble. 25. TREBLE -: Press to decrease the treble. 26. VOLUME -: Press to decrease volume. 27. PROGRAM: Press to program the playback order. 28. DIM: Press to select the display brightness level Low/Medium/High.


your audio device to the AUX IN socket via a 3.5mm aux in cable. Control playback via your connected audio device.
Fitting or replacing the remote control batteries 1. To open the battery compartment, push your thumb down on to the circle on the battery compartment cover and slide it down.
Preparation for use
Setting the time/date 1. To set the time/date manually, long press the MENU button when the unit is in standby. Use the / keys to change the values and press to confi rm.
Switching modes To switch between the modes: DAB+, FM, CD, Bluetooth, USB and AUX IN, press SOURCE button on the unit or the corresponding button (DAB/FM, CD, , AUX/USB) on the remote control.
Volume control 1. Increase: Rotate the VOLUME control on the main unit clockwise or press the VOL+ button on the remote.
EQ eff ects Press the EQ button on the remote repeatedly to cycle through a set of equaliser presets to adjust the sound. Choose from CLASSIC, ROCK, POP, JAZZ, DANCE, LIVE and Off .
AUDIO IN
Loudness function This function will increase the level of bass at low volume levels. Press the LOUD button on remote to enable the eff ect. Press again to disable the eff ect.
Mute function Press the button at any time to mute the sound output. Press again to unmute.
Place a speaker on either side of the main unit, preferably at the same height and with at least 150mm space between each speaker to the main unit. Connect the speaker plugs to the rear of the unit. Take care to match the speaker placed to the LEFT to the LEFT output on the rear of the unit. Repeat for the RIGHT speaker.
Tone controls To adjust the bass, use the BAS+ or BAS- buttons on the remote control. To adjust the treble, use the TRE+ or TRE- buttons on the remote control.
Standby mode Press the STANDBY button on the unit or the remote to put the system into standby mode. To resume normal operation, press this button again.
button on the unit, or DAB/FM button on the remote control to enter the DAB/FM mode. To use the radio in DAB/FM mode, follow the instructions in the FM or DAB RADIO OPERATION chapter of the User Manual.

– Press the FREQ button and then, using the number
buttons enter the frequency that you want to store. – Press the SAVE button, it will show "P01" on the display. – Press the / button to select the station preset number you want to save the frequency under. – Press the SAVE button again to confi rm. 6. Recall the preset stations:
– Press the / button to recall your stored stations.
– RDS is aviable on stations that support this service
FM only** 7. Scan setting** - Strong station only/All stations
– Time - Time set up – Language - language set up – Factory Reset - To reset the unit to the original settings, enter the
factory reset interface, follow the directions to <Press ENTER to prune station> and press the button. Then the unit will restart. – Software upgrade – SW version - Information about the software version of the system.
– Full scan – In MENU select <Full scan>, and press
button to enable full scanning. Alternatively, press and hold >|| when in DAB mode. – Manual tune - In MENU select <Manual tune> and press / button to select station from 5A:174.928MHz to 13F:239.200MHz. Then press button to activate the selected station. 4. Store Stations: It is possible to store up to 30 of your favorite stations. This will enable you to access your favorites quickly & easily.
– To store a preset, you must fi rst be listening
to the station you would like to save. – Press and hold one of the number buttons 0-9
to store the station under that number. – Alternatively, press SAVE, use / to select the preset number and press SAVE again. – To recall a stored station preset press the
corresponding number on the number keypad.
– If the track number consists of two digits, for example 25, press
button “2“, and then button “5“ to select the 25th track. – You can just press the number 9 - a single digit works.
Press the MENU button to enter the menu settings. Use the / button to select the menu contents. Press the button to confi rm the selection or to enter the next setting interface. Press the button to go back to the previous setting interface. Press the MENU button to exit the menu.
– For CD and CD-R discs, press the button to repeat playing songs. – Press once to repeat current song. Press again to repeat all tracks. – Press a third time to cancel. 8. Press the button on the remote control to play the tracks in a random order. Press again to resume.
*DAB only 1. Full scan* – Select the <Full scan>, and press
button to enable full scanning.
2. Manual tune* - Select the <Manual tune> and press / button to select station from 5A:174.928MHz to 13F:239.200MHz. Then press button to activate the selected station. 3. DRC (Dynamic range control)* This function will analyse the audio signal to reduce loud noises and amplify more quiet ones. This will enable a more clear and consistent sound delivery, particularly at lower volumes. Enter the menu and fi nd <<DRC>>, use the / button to select either DRC OFF, DRC HIGH or DRC LOW, press the button to confi rm.
– Press the button on remote control to stop playing. – Press the PROGRAM button on remote
or / to select the song. – Press the PROG button again to confi rm the selection
and the screen will then display P02. Repeat the process for your second selection and so on... – Press the PROGRAM button on the remote control to confi rm.

– To begin the programmed order, press the button. – To cancel the program sequence, press the button twice.
– MP3 fi les are supported. – Unsupported fi le formats are skipped. For example, Word documents
(.doc) or MP3 fi les with extension .dlf are ignored and not played.
The Micro system has Bluetooth capability and is able to receive a signal within a range of 7 metres. To pair the Micro system with a Bluetooth device: 1. Press the source button on the unit, or button on the remote control to enter Bluetooth mode. The unit will display "Bluetooth Not Connected".
Audio (AUX IN) allows your unit quickly and easily to connect to an MP3 player or other external sources. 1. Use a 3.5mm audio cable to connect your external audio device to the AUX IN socket on the front panel.
It is possible to listen to music stored on a USB fl ash drive via the USB device interface of the unit.
Connecting a USB fl ash drive: 1. Switch the unit on and select USB mode by pressing the SOURCE button or pressing the AUX/USB button on the remote control twice.
– MP3 fi les are supported. – Unsupported fi le formats are skipped. For example, Word documents
(.doc) or MP3 fi les with extension .dlf are ignored and not played – Even when the fi les are in a supported format (MP3), some
may not play or display depending on the compatibility. – In some cases, reading may be as long as 60
seconds, this is not a malfunction. – Depending on the amount of data and media speed, it
may take longer for the unit to read the USB device. – The maximum USB memory size is 32GB. – USB memory device must be formatted in FAT, FAT16 or FAT32


Pagina's waarnaar wordt verwezen in deze handleiding — fabrikant, ondersteuning en downloads.
Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.
Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.