Gebruiksaanwijzing /service van het product GT541 van de fabrikant Brother
Ga naar pagina of 126
GT -541 US support homepage http://www .brother-usa.com/G armentprinters/ GT -541 Please read this manual before using the printer . Please keep this manual within easy reach for quick reference.
GT -541 This product contains a CR Coin Lithium Battery which contains Perchlorate Material – s pecial handling may apply . See http://www .d tsc.ca.
GT-541 i Thank you very much for buying a BROTHER printer. Before usi ng your new printer, please read the safety instructions b elow and the explanations given in the instruction manual.
GT-541 ii WARNING Installation Do not set up the printer in a dusty environment. If dust collects inside the printer, it may cause fire or electric shocks or problems with correct operation.
GT-541 iii CAUTION Installation Setting up and moving of the printer should onl y be carried out by a qualified technician. The printer machine weighs approximately 100 kg. Transporting and setting up of the printer should be carried out by four or more people.
GT-541 iv [3] Warning labels The following warning labels appear on the printer. Please follow the instructions on the labels at all times wh en using the printer. If the labels have been removed or are difficult to read, please cont act your nearest Brother dealer.
GT-541 v Wash Liquid Ink Cartr idge 3932M.
T able of Contents 1. R ead This Firs t............................................................................................................. ............................................... 1 1-1. Prec au tions .................................
4-3. Set ting the Printe r Dri ver Con ditio n ...................................................................................... ........................... 43 4-3-1 . Enterin g the Job Comm ent ...................................................
GT-541.
1. Read This First GT -541 1 1. Read This First 1-1. Precautions Please observe the followi ng precautions before using you r printer . Please advise the following to customers. Printed colors may transfer when a printed surf ace rubs on a white or light-colored synthetic leather made of PVC (polyvinyl chloride).
1. Read This First GT -541 2 Never refill ink, never reconstruct ink cartri dges; ink may cohere inside the cartridge bag, tube or even Print Head and may cause serious da mage to your printer . We assume no responsibility for any problem caused by usin g them.
1. Read This First GT -541 3 1-2. Unp acking Y our Printer <Note> Y our printer must be unpacked by a Brother represen tative or a Brother authorized shipping comp any . After unpacking, check that the following parts are included. Contact Brother Customer Service Hot Line if any of these is missing.
1. Read This First GT -541 4 1-3. Required Condition Please use your printer under th e cond itions described in this section. 1-3-1. Environment T emperature Humidity Keeping your print er 32 °F to .
1. Read This First GT -541 5 1-3-4. Other Requirements When purchasing option al tools, choose one that me ets the following requirements. USB cable: USB 2.0-compliant device cable (A/B) <Note> Using other USB 2.0-compliant device cabl e may result in improper connection.
2. Identifying Y our Printer ’ s Parts GT -541 6 2. Identifying Your Printer’s Parts 2-1. Front No. Name Description 1 Platen Holds the T -shirt to be p rinted. 2 Platen Sheet Prevents a T -shirt from sli pping so that an image is printed on your desired position.
2. Identifying Y our Printer ’s Parts GT -541 7 2-2. Lef t 6 7 1234 5 No. Name Description 1 Black Ink Cartridge Slot 2 Magenta Ink Cartridge Slot 3 Cyan Ink Cartridge Slot 4 Y ellow Ink Cartridge Slot Load an Ink Cartridge of the a ppropriate color .
2. Identifying Y our Printer ’ s Parts GT -541 8 2-4. Rear Rear Cove r.
2. Identifying Y our Printer ’s Parts GT -541 9 2-5. Inside of the Front Cover Cancel any ope ration and turn off your printer b efore opening the Front C over . Open the Front Cover by pushing up the Cover Locks with both hands. <Note> If you open the Front Cover while operat ing, the power automatically turns off.
2. Identifying Y our Printer ’ s Parts GT -541 10 2-6. Under the Platen No. Name Description 1 Platen Height Adjustment Lever Adjusts the Platen height. Leftmost "A" is the normal T -shi rt position. Check the exact height with Platen Butto n on Control Panel when you print on thicker mat erial.
2. Identifying Y our Printer ’s Parts GT -541 11 2-7. Control Panel No. Name Description 1 Error Lamp Indicates errors or warnin gs. See “2-7-1. Indication Lamps” for the details. 2 Platen Button Loads / Ejects the Platen. 3 Head Cleaning Button Cleans the Print Heads.
2. Identifying Y our Printer ’ s Parts GT -541 12 2-7-1. Indication Lamp s The lamps on the control panel indicate the status of your printer as shown below . Lamp Printer S tatus Off: No print data has been received. Flashing: Receiving a print data.
2. Identifying Y our Printer ’s Parts GT -541 13 2-7-2. Display Menu Display: This display is used to select an operation fo r maintenance or setting up. Job/ St atus Display When your printer has recei ved a print data, it shows the Job/ S tatus Display: it displays the information neede d for printing operations.
3. Getting S tarted GT -541 14 3. Getting Started Before using your printer , it needs to be correctly setup as described in this chapter . WARNING Do not handle the power cord with wet hands, otherwise it may cause electric shocks. Do not set up the printer in a dusty environment .
3. Getting S tarted GT -541 15 3-1. Placing Y our Printer Locate your printer taking the followi ng into account Environmental conditions are suitable. Avoid direct sunlight, dust and extremes of humidity . Never use an extension cable. A working space must be left around the printer .
3. Getting S tarted GT -541 16 3-2. T urning On/Off Y our Printer <Note> Before you connect the power cord, make sure: The Ink Cartridges, Waste Ca rtridge T ray , and Wiper Cleaner Cassette are installed. The Rear Cover is mounted. Keep the front space as the Platen slides out approximately 30 cm (12 inches) when operating.
3. Getting S tarted GT -541 17 3-3. Prep aring Y our PC This section describes how to install the GT -541 Printer Dri ver (File Output), ma nuals (Basic Operation Manual/ Instruction Manual ), Brother GT File Viewer , and ot her tools. Make sure the steps because there are some different dialogs shown by Windows OS.
3. Getting S tarted GT -541 18 (5) During the installation, the following warning appears. Click "Continue Anyway" and continue. Windows XP Windows 2000 (6) After installation, your PC will need to rest art. Remove your Install CD and restart your PC.
3. Getting S tarted GT -541 19 (3) Turn on your GT -541 printer . The following window appears. Select "No, not this time”, and then click “Next”. (4) Insert the Install CD. The following window appears. (5) Select “Install the software aut omatic ally (Recommended)”, and the click “Next”.
3. Getting S tarted GT -541 20 (1) Confirm that the Install CD is inserted properly , and then click “OK”. The following window appears. (2) If install CD is not in drive [D:], the follo wing window appears. Click “Browse…” to select the CD drive, and then click “OK”.
3. Getting S tarted GT -541 21 3-3-3. Connection with USB 2. 0 Cable: for Windows 2000 (1) Connect the USB 2.0 cable to your printer (power OFF). <Note> We do not recommend conne ction via a USB hub to the printer . (2) Connect the other end of the USB 2.
3. Getting S tarted GT -541 22 (5) Click either "Brother GT -541" or Brother GT -541 F ileOutput icon and select "Set as Default Printer" on “File” menu. “Brother GT -541” icon is checked and Brother GT -541 is set as the default printer .
3. Getting S tarted GT -541 23 3-3-5. Inst alling Useful T ools We provide Color Palettes for Adobe Ph otoshop (GT -541_Col ors.aco) / CorelDRAW (GT -541_Colors.cpl) t o help you with printing. The colors are the same i n ColorChart which is available in "T est Pri nt" menu of Printer Dri ver .
3. Getting S tarted GT -541 24 (3) Insert the Install CD (included) to your PC. Select either [ 32bit_OS ] or [ 64bit_OS ] (depends on your PC) and execute "Setup.exe". (4) The monitor turns dark and the following dialog appears when User Account Control is ON.
3. Getting S tarted GT -541 25 Connection with USB 2.0 Cable (1) Connect the USB 2.0 cable to your printer (power OFF). (2) Connect the other end of the USB 2.0 Cable to your PC. (3) T urn on your GT -541 printer . Installation starts automatically . The information appears at the right bottom of the PC monitor .
3. Getting S tarted GT -541 26 3-4. Setting Up Y our Printer Adjust the display contrast and the speaker vol ume as required. 3-4-1. Adjusting th e Display Contrast (1) Press the OK Button on your printer ’s Control Panel. The following display appears.
3. Getting S tarted GT -541 27 3-4-3. Language (1) Press the OK Button on your printer ’ s Control Panel. (2) Use the Up/Down Button to select “Language”, and then press the OK Button. (3) Use the Up/Down Button to select your desir ed language from English / Español / Français / Deutsch / Italiano and then press the OK button.
4. Printing Directly from a Graphic A pplications GT -541 28 4. Printing Directly from Applications WARNING If a foreign object gets inside the printer , immediately turn of f the power switch and disconnect the power cord, and arrange for a service call to resolve.
4. Printing Directly from Applications GT -541 29 4-1. Basic Printing Procedure (1) Set the proper color settings and print conditions of the application. For precise editing and output, applications such as Adobe Photoshop, Illustrato r , CorelDRA W , Paint Shop Pro are reco mmended.
4. Printing Directly from Applicati ons GT -541 30 4-2. Setting the Applications’ Print Condition This section describes the settings for correct printing of garments. 4-2-1. Common Notice for All Applications Color Mode / Color S p ace: GT -541 Printer is RGB (Red Green Blue) printer .
4. Printing Directly from Applications GT -541 31 4-2-2. Settings for CorelDRA W 10/1 1/12/X3 Color settings: (1) Select [ T ools ] > [ Color Management ] (2) CorelDRA W 10/1 1/12: Select “Color Management off” as the style. CorelDRA W X3: Select RGB radio button.
4. Printing Directly from Applicati ons GT -541 32 Print Area (CorelDRA W 10/1 1/12/X3) : (1) Select [ File ] > [ Print Setup ] menu. (2) Select “Brother GT -541” or "Brother GT -541 FileOutput" for the printer to be used. Y our PC's default printer is recommended.
4. Printing Directly from Applications GT -541 33 Convert to Bitmap: (1) Select [ Bitmaps ] > [ Convert to Bitmap... ] menu. (2) CorelDRA W 10/1 1/12: Make sure that "Color" is RG B and "Apply ICC Profile" is OFF .
4. Printing Directly from Applicati ons GT -541 34 4-2-3. Settings for Ado be Photoshop 6/7/CS/CS2 Color settings: (1) Select [ Edit ] > [ Color Settings ] menu. The Color Settings window appe ars. (2) Make Color settings as follows, and then click “OK".
4. Printing Directly from Applications GT -541 35 Print: (1) Select [ File ] > [ Print with Preview Alt + Ctrl + P ] menu (depends on versions). When the default printer of the PC used is set "Bro ther GT -541”, the layout is set in this window .
4. Printing Directly from Applicati ons GT -541 36 Color Palette (Swatch) in Install CD: (1) See "3-3-5. Installing the Useful T ools" and download Photoshop Color Palette (called swatch in Photoshop) GT -541_Colors.aco. (2) Select [ Window ] and check [ Swatches ] to show .
4. Printing Directly from Applications GT -541 37 4-2-4. Settings for Adob e Illustrator 10/CS/CS2 <Important!> Set Brother GT -541 as the default printer before you go on to the following steps, otherwise, an image may be printed incorrectly .
4. Printing Directly from Applicati ons GT -541 38 Opening the new file: Set the New Document se ttings as follows: Width: 14 in Height: 16 in Orientation: Portrait Color Mode : RGB Color Printing: (1) Click [ File ] > [ Print ] menu. (2) Illustrator 10/CS: Make sure the following settings.
4. Printing Directly from Applications GT -541 39 llustrator CS2: Make sure the following settings. Make sure Document Profile and Printer Profile are either "sRGB IEC61966-2.1" or "Unt agged RGB". Color Handling: Let Illustrator determine Colors Click "Setup" to do Printer Driver Settings.
4. Printing Directly from Applicati ons GT -541 40 An image that is smaller than 14 x 16 inches (e.g . a letter-si ze image) may not be printed on proper positions, or may result in errors. If this happens follow the steps below to correct. (1) Open "Document Setup" on "File" m enu.
4. Printing Directly from Applications GT -541 41 4-2-5. Settings for Ado be Photoshop Elements Color settings and pri nt settings are require d before pr inti ng. After the printer driver is installed, set the Colors before editing the document. Color settings: (1) Select "Color Sett ings.
4. Printing Directly from Applicati ons GT -541 42 4-2-6. Setting Paint Shop Pro Print Condition Color settings: (1) Select [ File ] > [ Preferences ] menu. (2) Select "Color Management". The Color Management window appears. (3) Uncheck "Enable Color Management", and then click “OK”.
4. Printing Directly from Applications GT -541 43 4-3. Setting the Printer Driver Condition Set the printer driver conditi on following the procedure below . (1) Select [ File ] > [ Print ] menu of the graphic application. The Print window appears.
4. Printing Directly from Applicati ons GT -541 44 4-3-1. Entering the Job Comment Y ou can enter a comment (max 17 characters) to disp lay on your printer ’ s Control Pa nel. It is used to advise the operator . 4-3-2. Selecting the Platen Size Select the appropriate Platen size from the pull-down menu.
4. Printing Directly from Applications GT -541 45 4-3-6. Selecting the Ink V olume T o get the best print result, you may ne ed to adjust the amount of ink de pending on the fabric of the T -shirt to pr event blurring Print “Ink volume check pattern” first and select the best ink volume by sliding the Ink V olume tab.
4. Printing Directly from Applicati ons GT -541 46 Example 1 (50% cotton 50% polyester thin T -shirt) Select Ink V olume 10 Example 2 (100% polyester synthetic leather fabric) Select Ink V olume 2 4-3-7. Setting Y ellow / Black Printing Y ellow/black printing can sometimes show t he problem below .
4. Printing Directly from Applications GT -541 47 (2) Select "Color Chart" form the pull down menu, and then click “Print” to send the data to your printer . (3) Print on the T -shirt and set ink with Heat Press. <Note> Use our Color Palette for Photoshop and CorelDRAW , which is in Inst all CD.
4. Printing Directly from Applicati ons GT -541 48 4-4. Uninst alling / Inst alling the Platen Replace the Platen for your p rint material. When Y outh Platen 10 x 12 i nches is used, be sure to set "Platen Size" in Printer Dri ver menu (see "4-3-2.
4. Printing Directly from Applications GT -541 49 4-4-2. Installing the Platen (1) Place the Platen. (2) Tighten the Platen Fixing Lever securely . <Note> Adjust the Platen Height (see "4-5.
4. Printing Directly from Applicati ons GT -541 50 4-5. Placing the T -shirt on the Platen CAUTION Ensure there is adequate space lef t for safe working. The Platen moves forward while operating. Do not handle the platen while printing. If your hand gets caught between the platen or the T -shirt tray and the covers, it may be injured.
4. Printing Directly from Applications GT -541 51 (4) Place the T -shirt, with its print side on the t op of Platen and the other si de underneath the Platen, as shown below . <Note> Pay attention to the hems; neck, arm holes, tags, and the bottom.
4. Printing Directly from Applicati ons GT -541 52 (9) Press the Pla ten Button to insert the Platen, and check the gap between the Obstruction Sensor and the T -shirt.
4. Printing Directly from Applications GT -541 53 4-6. Printing CAUTION Ensure there is adequate space lef t for safe working. The Platen moves forward while operating. Do not handle the platen while printing. If your hand gets caught between the platen or the T -shirt tray and the covers, injury may result.
4. Printing Directly from Applicati ons GT -541 54 4-6-2. Printing More than One Print Using the Same Print Dat a After ma king one print following the pr ocedure in “4-6 -1. Making On e Print”, you can continue making more prints using the same print data.
5. Printing ARP Files GT -541 55 5. Printing ARP Files When saving a pri nt data in ARP format file, you c an select the printing procedure by either of these two methods Print an ARP file with GT File Viewer . Y ou can check the detailed print conditions and ink cost before sending a print data to your printer .
5. Printing ARP Files GT -541 56 5-1. Making Print Dat a in ARP Format <Note> Y ou cannot edit ARP files; we recommend you save the data in the original format as well. (1) Create the artwork using a g r aphic application. See “4-2. Setting the Applications’ Print Condition” for proper settings.
5. Printing ARP Files GT -541 57 (4) Follow the procedures in “4-2. Setting the App lications’ Print Condition”, as selecting “Brother GT -541 FileOutput” for the printer , and then click “Print” or “OK” on the application’s print window .
5. Printing ARP Files GT -541 58 5-2. Reading ARP Files Saved in a Comp actFlash <Note> Use a CompactFlash that meet s the requirements (see “1-3-4. Other Requirement s”). Y our printer can only read ARP files from a Comp actFlash. Save ARP files directly in a Comp actFlash without making folder beneath it.
5. Printing ARP Files GT -541 59 5-3. Sending ARP Files from GT File Viewer to your Printer (1) Double-click the shortcut of GT File Viewer on the PC desktop. GT File V iewer opens. (2) Click “File” and select the ARP file you want to open, and then click “OK”.
6. Maintenance GT -541 60 6. Maintenance For optimum product performa nce regular maintenance is requi red. DANGER W ait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet before opening the cover o f the control unit.
6. Maintenance GT -541 61 6-1. Replacing Consumables This section describes how to replace th e consumables: Ink Cartridge, Wiper Clean er , W aste Ink Cartridg e, and Platen Sheet. 6-1-1. Replacing the Ink Cartridge The ink indicator on the Display flashes when the Ink Cartridge is getting low .
6. Maintenance GT -541 62 (3) Insert the new Ink Cartridge securely ( ens ure the direction and the color are correct. <Note> Confirm the color of the ink cartridge. Loading a wrong color causes serious damage to print quality , and could damage to the Print Heads.
6. Maintenance GT -541 63 (3) Press the Up/Down Button to select the “C ap/Wiper Clean”, and then press the OK Button. The Wiper Blade will be at the cleaning position. Follow the message and turn off the printer . (4) Open the Front Cover by unlocking the Cover Locks with both hands.
6. Maintenance GT -541 64 (7) Push both sides of the Wiper Cleaner Cassette to open it. (8) Carefully drop off the used Wiper Cleaner And di spose of in accordance with local regulations. <Note> Dispose the used Wiper Cleaner in compliance with your local regulations.
6. Maintenance GT -541 65 (10) Close the Wiper Cleaner Cassette. Make sure that the bottom of the Wiper Cleaner is set within the two projections on the Wiper Cleaner Cassette. Push in the Wiper Cleaner after closing. (1 1) Open the Wiper Cleaning Kit which co mes with the new Black Ink Cartridge.
6. Maintenance GT -541 66 (13) Use the one side of wet Clean Applicator to clean the front side of the Wiper Blade. (14) Use the other side of the wet Clean Applic ator to clean the rear of the Wiper Blade. (15) Wet other two Clean Applicators and use them to remove ink or dust from the Print Head Caps.
6. Maintenance GT -541 67 (16) Insert the Wiper Cleaner Casset te straight into your printer . <Note> Do not touch the Clearance Sensor (the bar above the Wiper Cleaner Cassette).
6. Maintenance GT -541 68 (1) Pull out the Wa ste Cartridge T ray . The message “ERROR NO W ASTE INK TRA Y” is displayed. (2) Remove the sticker on the used Waste Ink Cartridge, and use it to seal the hole on it. (3) Remove the new Wa ste Ink Cartridge from its p ackage.
6. Maintenance GT -541 69 (6) Install the W aste Cartridge T ray . When the error display" ERROR NO WASTE INK TRA Y " disappears, the replacement of the W aste Ink Cartridge has been completed. <Note> Dispose the used W aste Ink Cartridge in accordance with your local regulations.
6. Maintenance GT -541 70 6-1-5. Required Maintenance for the Lon g Storage If you are not going to use your printer for mo re than two weeks, clean the Pri nt Head Caps before storage to prevent ink drying o n the print heads <Note> The Wash Liquid is used for this cleaning.
6. Maintenance GT -541 71 (6) Fill the Print Head Caps with W ash Liquid to prevent from ink clogging inside. <Note> Be careful not to spill the Wash Liquid around the Print Head Caps. If the Wiper Cleaner and the surroundings are dirt y , refer to "6-1-2.
7. T roubleshooting GT -541 72 7. Troubleshooting WARNING Do not put your hands in the ink cartridge sl ot, o therwise the needle inside the slot may cause injury . CAUTION Ensure there is adequate space lef t for safe working. The Platen moves forward while operating and it may be injured.
7. T roubleshooting GT -541 73 7-1. Solving Printer Problems Use the table below to help solve printer problems. Problem Cause Solution Cannot send print data from the PC. Y ou have selected the wrong printer . Confirm the selected printer , and select the correct one.
7. T roubleshooting GT -541 74 Problem Cause Solution Pressing the Print Button does not start printing. GT -541 is indicating an error Solve the cause of the error, and try again. Auto Head Cleaning is in process. Wait until the Head Cleaning finishes.
7. T roubleshooting GT -541 75 7-2. Solving Print Quality Problems Use the table below to solve print quality problems. Problem Cause Solution The graphic application’ s settings are not appropriate. Maybe CYMK mode is being used for data. See “4-2 Setting the Application’s Print Condition" and modify the artwork.
7. T roubleshooting GT -541 76 7-2-1. Procedure for Solving the Print Quality Problems Follow the procedur e (S tep 1 to 7) below u n til the print quality pr oblem is solved. Step 1: Clean the Print Heads by pressing the Head Cleaning Button. Head Cleaning with flushing fresh ink can so lve mo st print quality problems.
7. T roubleshooting GT -541 77 (4) Check the Wiper Cleaner , and if it is heavily soiled, replace it us ing the Cap Cleaning Kit (see “6-1-2. Replacing the Wiper Cleaner”). If the Wiper Cleaner is not heavily soiled, go on to the next step. (5) Check the Wiper Blade, and if it is damaged or worn , replace it using the Wiper ASSY (see “7-2-10.
7. T roubleshooting GT -541 78 Step 5: Clean the Print Head Nozzles. (1) Clean the Print Head Nozzle using the Nozzle Cleaning Kit (see “7-2-6. Cleaning the Print Head Nozzles”).
7. T roubleshooting GT -541 79 7-2-2. Cleaning the Print Heads Y our printer aut omatically cleans its Print Heads every 24 pri nts (you can change the freque ncy; see “7-2-5. Changin g the Auto Head Cleanin g Setting”), or when your pri nter has not been used for more than two hours.
7. T roubleshooting GT -541 80 7-2-3. Checking Print Qua lity with Nozzle Check Pattern Y ou can identify which Print Head has the pro blem by using the Nozzle Check Pattern. (1) Install the Platen 14 x 16 (see “4-4. Uninstalling / Installing the Platen”).
7. T roubleshooting GT -541 81 (8) Check the printed pattern to ident ify which Print Head has the problem. If there is stripes (arrow 1) or line breaks (arro w 2), the Print Head of the color (in th e following example: Black) has the problem. The Prin t Heads need to be cleaned (see “7-2-2.
7. T roubleshooting GT -541 82 7-2-5. Changing the Au to Head Clea ning Setting Y our printer aut omatically cleans its Print Heads every 24 prints. However more fre quent Print Heads cleaning needs to be done dependi ng on the environment. In this case, change the Auto Head Cleaning freq uency as follows.
7. T roubleshooting GT -541 83 7-2-6. Cleaning the Print Head Nozzles Use the Nozzle Cleani ng Kit to clean the Head Nozzle. See the “Maintenance Video” in the Install CD (English only). <Note> Pay careful attention in cleaning the clean Print H ead Nozzles, which are tboth delicate and expensive.
7. T roubleshooting GT -541 84 (7) Pull out the Wiper Cleaner Cassette. <Note> Do not tilt the Wiper Cleaner Cassette; ink may get on your hands or clothing. Do not touch the Clearance Sensor (t he bar above the Wiper Cleaner Cassette). (8) Open the Nozzle cleaning Kit.
7. T roubleshooting GT -541 85 (9) Wet the surface (nozzle plate) of the Print Head with W ash Liquid. Then r ub sof tly the nozzle plate to remove ink and debris from the nozzle plate until the nozzle plate is clean.
7. T roubleshooting GT -541 86 7-2-7. Replacing the Print Head The print heads can be replaced followin g the "Replacing the print head procedu re".
7. T roubleshooting GT -541 87 (7) Insert the Filter Cartridge to the Ink Cartridge Slot, and then press the OK Button. The ink draining of the head begins. W ait until the message “T urn Off & Please Change [X] Head” appears (8) Turn of f your printer .
7. T roubleshooting GT -541 88 (10) T urn up the appropriate flat cable connector tab, and then disconnect the flat cable. Flat cable C onnector tab Flat cabl e C onnecto r tab (1 1) Wear the gloves included with the new Print Head, and then remove the tube fitting from the new Print Head.
7. T roubleshooting GT -541 89 (12) Rotate the tube connector 90 degree s as shown below . (13) Disconnect the tube and put the tube fitting removed from the new Print Head to prevent the ink from coming out. (14) T urn the lever to the direction of the arrow to unlock the Print Head.
7. T roubleshooting GT -541 90 (15) T ake off your gloves and remove the used Print Head by lifting up the knob. Knob (16) Remove the Protective Tube from the new Print Head, and then install the new Print Head by holding the knob, and holding the flat cable with the other hand.
7. T roubleshooting GT -541 91 (17) Press down the Print Head knob securely and push in the Print Head b ackward to align the Print Head properly . (18) T urn the lever to the direction of the arrow to lock the Print Head. (19) Remove the Nozzle Protection Seal by pulling it up.
7. T roubleshooting GT -541 92 (20) T ake off the gloves, insert the flat cable into the connector , and then turn down the connector tab to lock the cable. <Note> Make sure the flat cable is inserted straight against the connector. If not , reconnect it correctly .
7. T roubleshooting GT -541 93 (27) Press the OK Button to open the Menu Display . (28) Press the Up/Down Button to select “Head Cleaning”, and then press the OK Button. (29) Press the Up/Down Button to select “Ini tial” Cleaning mode, and then press the OK Button.
7. T roubleshooting GT -541 94 7-2-8. Adjustment after the Print Head has been replaced. If the printed image is unclear then the print h ead timing may need to be adjusted. (1) Make sure your printer is connected to your PC. (2) Turn on your PC. (3) Prepare some sheets of pape r and tapes to fix on the Platen.
7. T roubleshooting GT -541 95 7-2-9. Cleaning the Carriage Shaft s If the error message “Fail: C RG S peed” or “Fail: CRG S top 1 ” is displayed, the Carri age Shafts might be smudged with inks and dusts. Clean and oil the Carriage Shafts following the procedure below .
7. T roubleshooting GT -541 96 7-2-10. Replacing the Wiper Blade The Wiper Blade n eeds to be replaced periodicall y , to solve the ink jetting problem. Use the Wip er ASSY (sold sep a rately) for the replacement. (1) Turn on your printer if it is of f.
7. T roubleshooting GT -541 97 (6) Open the Front Cover by unlocking the Cover Locks with both hands. (7) Pull out the Wiper Cleaner Cassette. <Note> Do not tilt the Wiper Cleaner Cassette; ink may get on your hands or clothing. Do not touch the Clearance Sensor (the bar abov e the Wiper Cleaner Cassette); it may cause a malfunction.
7. T roubleshooting GT -541 98 (9) Push the right Operation Arm about 5 mm (0.2 in ches) to the right and pul l out the Wiper Blade as holding its left.
7. T roubleshooting GT -541 99 (10) Remove the Wiper Blade by pulling it to the left. (1 1) Insert the left projection of the new Wiper Blade to the slit of the left Operation Arm.
7. T roubleshooting GT -541 100 (12) Insert the right projection of the new Wiper Blade to the slit of the right Operation Arm by pushing the right Operation Arm about 5 mm (0.2 inches) to the right. <Note> Do not push the Operation Arm by force.
7. T roubleshooting GT -541 101 (14) Insert the Wiper Cleaner Casset te straight into your printer . <Note> Do not touch the Clearance Sensor (the bar above the Wiper Cleaner Cassette); (15) Close the Front Cover , and then turn on your printer .
7. T roubleshooting GT -541 102 7-3. Solving Application Problems Problem Cause Solution The image sent from Adobe Illustrator 10 is printed 90 degree rotated.
7. T roubleshooting GT -541 103 Problem Cause Solution The Platen Size setting changes to Platen 10 x 12 (this happens especially when printing the image smaller than 14 x 16 inches). ―― Check the Platen Size in the Printer Driver window before you send the print data to your printer.
7. T roubleshooting GT -541 104 7-4. Error Messages Here is a complete list of error messages that GT -541 shows. When mark ** is in Solution, write down the error code number a nd the message, and then make contact to your dealer or Brot her. Error codes of W arnings (#1xxx) are onl y written in Log file.
7. T roubleshooting GT -541 105 Error code Messag e Meaning Solution 2022 EMPTY Cy an The Cyan Ink C artridge ran out of ink. Replace to a n ew Cyan Cartrid ge. 2023 EMPTY Y ellow The Y ellow Ink Cartri dge ran out of ink. Replace t o a new Y ellow Cartridge.
7. T roubleshooting GT -541 106 Error code Messag e Meaning Solution 3000 PC Comm. Error Send data agai n GT -541 fail ed to receive t he print data (time out). This error occurs when the USB cable is disconnect ed during data transmission, or data transmission is canceled on the PC.
7. T roubleshooting GT -541 107 Error code Messag e Meaning Solution 4005 PC Dat a Error 4006 PC Dat a Error 4007 Blank Da ta GT -541 r eceived blank print data from the PC.
7. T roubleshooting GT -541 108 Error code Messag e Meaning Solution 5000 Machi ne Er ror or SHBY : Send MSG TO Communicatio n error insi de the firmware.
7. T roubleshooting GT -541 109 Error code Messag e Meaning Solution 5100 BYSH:ILGL SIZE Y Defect in the Platen information from SH (y) 5101 BYSH:ILGL OFFSET Defect in the scan print area from SH 5102.
7. T roubleshooting GT -541 1 10 Error code Messag e Meaning Solution 6003 Fail: PL TN Put in Plat en moving err or ** 6004 Fail: CLRNS SNS R Clearanc e sensor error 6010 Fail: SH EEP WR T Failure in .
7. T roubleshooting GT -541 111 Error code Messag e Meaning Solution 61 10 Fail: BY EEP WRT Failur e in writing to EEPROM of BY ** 61 1 1 Fail: BY FLSH ERS Fail ure in clear ing FLASH ROM of BY 61 12 .
7. T roubleshooting GT -541 1 12 Error code Messag e Meaning Solution 7101 PRG: BY Exception Error inside the program (Exceptionally occurs in C PU of BY) 71 10 PRG: BY ILGL Arg Error ins ide the prog.
7. T roubleshooting GT -541 1 13 Error Messages of Maintenance Unit Error code Message Meaning Solution CA Cap Driver Overheat The operati on stopped b ecause the Cap Driver ha s overheate d. ** CC Wiper Cleaner Cassette error Wiper Clea ner Cassette is c oming off.
8. Specifications GT -541 1 14 8. Specifications 8-1. Mechanical Specification Dimensions 1 170 (W) × 935 (D) × 610 (H) mm Weight (GT -541 including Platen) Approx.
GT-541.
INSTRUCTION MANUAL 1-5, Kitajizoyama, Noda-cho, Kariya 44 8-0803, Japan. Phone: 81-566-9 5-0088 © 2005-2007, 2010 Broth er Industries, Ltd. All Rig hts Reserved. This is the original instructions. GT -541 SA6124-801 E 2010.0 . B (1) http://www .brother .
Een belangrijk punt na aankoop van elk apparaat Brother GT541 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Brother GT541 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Brother GT541 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Brother GT541 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Brother GT541 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Brother GT541 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Brother GT541 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Brother GT541 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.