

INSTRUCTION MANUAL GEBRUIKSAANWIJZING BEDIENUNGSANLEITUNG MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI

Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features. Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference. - Prior to using the unit, please ask advice from a
- Do not repeatedly switch the fixture on and off. This
specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while. - The unit contains voltage carrying parts. Therefore, do
shortens the lifetime. - Keep the unit out of the reach of children. Do not leave
the unit unattended. - Do not use cleaning sprays to clean switches. The
NOT open the housing. - Do not place metal objects or pour liquids into the unit
residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist. - Do not force the controls. - This unit is with speaker inside which can cause
This may cause electrical shock and malfunction. - Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes. - The unit is not suitable for continuous use. - Be careful with the mains lead and do not damage it. A
magnetic field. Keep this unit at least 60cm away from computer or TV. - If this product has a built-in lead-acid rechargeable
faulty or damaged mains lead can cause electrical shock and malfunction. - When unplugging the unit from a mains outlet, always
battery: Please recharge the battery every 3 months if you are not going to use the product for a long period of time. Otherwise, the battery may be permanently damaged. - If the battery is damaged, please replace with same
pull the plug, never the lead. - Do not plug or unplug the unit with wet hands. - If the plug and/or the mains lead are damaged, they
specifications battery. And dispose the damaged battery environment friendly. - If the unit has fallen, always have it checked by a
need to be replaced by a qualified technician. - If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the unit to a rheostat or dimmer. - To avoid fire and shock hazard, do not expose the unit to
qualified technician before you switch the unit on again. - Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth. - Keep away from electronic equipment that may cause
rain and moisture. - All repairs should be carried out by a qualified technician
interference. - Only use original spares for repairs, otherwise serious
only. - Connect the unit to an earthed mains outlet (220-
damage and/or dangerous radiation may occur. - Switch the unit off prior to unplugging it from the mains
240Vac/50Hz) protected by a 10-16A fuse. - During a thunderstorm or if the unit will not be used for a
and/or other equipment. Unplug all leads and cables prior to moving the unit. - Make sure that the mains lead cannot be damaged when
longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use. - If the unit has not been used for a longer period of time,
people walk on it. Check the mains lead before every use for damages and faults! - The mains voltage is 220-240Vac/50Hz. Check if power
condensation may occur. Let the unit reach room temperature before you switch it on. - For use in humid rooms or outdoors: refer to the
outlet match. If you travel, make sure that the mains voltage of the country is suitable for this unit. - Keep the original packing material so that you can
installation guidelines for safe assembly. - To prevent accidents in companies, you must follow the
transport the unit in safe conditions.
applicable guidelines and follow the instructions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to. The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee! NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.


Press for previous track, press and hold to lower volume level. 3. PLAY/PAUSE 4. VOLUME UP – NEXT TRACK
Press for next track, press and hold to increase volume level. 5. MODE
Switch between USB, AUX, BT or internet modes. 6. PRESET CHANNEL BUTTONS 1-4
Choose from the preset selection (which is programmable in the app). 7. PRESET CHANNEL SWITCH UP OR DOWN
Toggle within the pre-programmed selection (which is programmable in the app). 8. RJ-45 LAN-CONNECTOR 9. USB INPUT 10. AUX INPUT 11. DC INPUT 12. WPS/RESET Press to connect with a router using WPS. Press and hold for a factory reset 13. POWER INDICATOR 14. LINE OUT 15. SPEAKER OUTPUT



Power ON / OFF
Short press for join the speaker group (only working in combination with the app) Long press for exit the speaker group (only working in combination with the app)
Switch UP for the predefined channel (only working in combination with the app)
Switch Down for the predefined channel (only working in combination with the app)
BT Short press for switch to the BT play mode Long press for switch to the BT pair mode
Short press for connect the speaker to the WIFI Long press for restore to the factory settings
Switch between BT , WIFI, Line-in, USB,
Connecting your BT-device to the amplifier , follow below steps:
If you want to change BT-device, follow below steps:
For the best user experience, please download the latest version of the LEGACY Player app via Apple store or Google play. Here you will also find the latest features and explanations on how to use them.


Legacy Player Apple Store Legacy Player Google Play
Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.
Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.