Gebruiksaanwijzing /service van het product NB30 van de fabrikant Cabletron Systems
Ga naar pagina of 64
Title Page NB30 User’ s Guide.
.
i Notice Cabletron Systems r eserves the right to make changes in speciÞcations and other information contained in this document without prior notice. The reader should in all cases consult Cabletr on Systems to determine whether any such changes have been made.
ii AppleT alk, Apple, Macintosh, and T okenT alk are r egistered trademarks; and Apple Remote Access and EtherT alk are trademarks of Apple Computer , Inc. SmartBoost is a trademark of American Power Conversion ST is a register ed trademark and C++ is a trademark of A T&T Banyan and VINES are r egistered trademarks of Banyan Systems, Inc.
iii ANNEX, ANNEX-II, ANNEX-IIe, ANNEX-3, ANNEX-802.5, MICRO-ANNEX-XL, and MICRO- ANNEX-ELS are trademarks of Xylogics, Inc. MAXserver and Xyplex are trademarks of Xyplex, Inc. Restricted Rights Notice (Applicable to licenses to the United States Government only .
iv.
v Contents Chapter 1 Intr oduction Using the NB-30 Bridge User Õs Guide ....................................................................... 1-1 Related Manuals ......................................................................................
Contents vi Ethernet and Remote Port Packet Discarded Statistics ........................... 3-17 Bridge Spanning T ree.................................................................................................. 3-17 Bridge Level Parameters ....
1-1 Chapter 1 Intr oduction How to use this guide; related guides; software con ventions; getting help; NB-30 Br idge firmware v ersion W elcome to the SPECTRUM Element Manager for the NB-30 User Õs Guide. We have designed this guide to serve as a simple refer ence for using SPECTRUM Element Manager for the NB-30 Bridge.
Introduction 1-2 Related Manuals Chapter 1, Introduction , provides a list of r elated documentation, describes certain software conventions, and shows you how to contact Cabletr on Systems T echnical Support.
Software Con v entions 1-3 Introduction Software Con ventions SPECTRUM Element Manager Õs device user interface contains a number of elements which are common to most windows and which operate the same regar dless of which window they appear in.
Introduction 1-4 Softw are Conv entions ¥ Double-clicking means to position the mouse pointer over the indicated target, then pr ess and release the mouse button two times in rapid succession. This is commonly used to activate an objectÕs default operation, such as opening a window from an icon.
Software Con v entions 1-5 Introduction IP Address Displays the deviceÕs IP (Internet Pr otocol) Address; this will be the IP address used to deÞne the device icon. IP addr esses are assigned via Local Management for the NB-30; they cannot be changed via SPECTRUM Element Manager .
Introduction 1-6 Getting Help Getting Help This section describes differ ent methods of getting help for questions or concerns you may have while using SPECTRUM Element Manager . Using On-line Help Y ou can use the NB-30 Bridge window Help buttons to obtain information speciÞc to the device.
NB-30 Bridge Fir mware 1-7 Introduction Getting Help fr om the Cabletr on Systems Global Call Center If you need technical support related to SPECTRUM Element Manager , or if you have any questions, c.
Introduction 1-8 NB-30 Br idge Firmware.
2-1 Chapter 2 The NB-30 Bridg e Chassis Vie w Inf or mation displa yed in the Chassis View window; the logical chassis view; the Chassis Manager window; bridge management functions The NB-30 Bridge Ch.
The NB-30 Bridge Chassis View 2-2 Viewing Chassis Inf or mation Vie wing Chassis Inf ormation The NB-30 Bridge Chassis V iew window ( Figure 2-2 ) pr ovides a graphic repr esentation of the NB-30 Bridge, including a color-coded port display which immediately informs you of the current status of bridging at each port.
Viewing Chassis Inf or mation 2-3 The NB-30 Bridge Chassis View Fr ont P anel Inf ormation The areas surr ounding the main port display area pr ovide the following device information: IP The Internet .
The NB-30 Bridge Chassis View 2-4 Viewing Chassis Inf or mation Date The current date, in an mm/dd/yyyy format, set in the NB-30 BridgeÕs internal clock.
Viewing Chassis Inf or mation 2-5 The NB-30 Bridge Chassis View The Device Men u From the Device Menu at the Chassis V iew window menu bar , you can access the following selections: ¥ Device T ype... , which displays a window containing a description of the device being modeled: NB-30 - Remote Bridge.
The NB-30 Bridge Chassis View 2-6 Viewing Chassis Inf or mation The NB-30 Bridge P or t Status Display Each port display on the NB-30 will indicate that portÕs current bridging state: FWD (Forwarding) (Green) The port is on line and forwar ding packets across the NB-30 from one network segment to another .
Managing the Bridge 2-7 The NB-30 Bridge Chassis View Figure 2-4. Chassis Manager W indow Viewing Har dware T ypes In addition to the graphical displays described above, choosing the Device T ype option on the Device menu brings up a window that describes the management device being modeled: Figure 2-5.
The NB-30 Bridge Chassis View 2-8 Managing the Bridge Setting the Device Date and Time The Device menu pr ovides access to two methods for changing the date and time stored in the deviceÕs internal c.
Managing the Bridge 2-9 The NB-30 Bridge Chassis View 2. Enter the new date in an mm/dd/yyyy f or mat, either by highlighting the field you wish to change and using the up and do wn arrow b uttons, or b y simply entering the new v alue in the appropriate field.
The NB-30 Bridge Chassis View 2-10 Managing the Bridge.
3-1 Chapter 3 NB-30 Bridging Bridge management ov er view; viewing and managing bridging interf aces; using the Bridge Status window; viewing bridge statistics; using Spanning T ree; using the Filtering Database; Restoring br idge def aults; Resetting br idge def aults; Restar ting the br idge.
NB-30 Bridging 3-2 Bridging Basics About T ransparent Bridging T ransparent bridges ar e most common in Ethernet networks. Individual T ransparent bridges monitor packet traf Þc on attached network s.
Bridge Status 3-3 NB-30 Bridging ¥ The Spanning T ree window shows bridge port information and pr otocol parameters relating to the Spanning T r ee AlgorithmÑthe method of determining the controlling bridge when a series of bridges ar e placed in parallel (see Bridge Spanning T ree , page 3-17 ).
NB-30 Bridging 3-4 Bridge Status Figure 3-1. The NB-30 Bridge Status W indow The following information is provided by the Bridge Status window for the NB-30 and for each individual bridging interface.
Bridge Status 3-5 NB-30 Bridging Bridge State on Interface This color-coded text box indicates the state of bridging over the port interface. Note that this state (and its corresponding color code) will also be r eßected on the NB-20E/25E Port display in the Chassis V iew window .
NB-30 Bridging 3-6 Bridge Status Bridge Status on Remote P or t Interface This color-coded text box indicates the operating status of the r emote port.
Bridge Status 3-7 NB-30 Bridging ¥ NO EXT CLOCK (blue) Ñ Indicates that the remote port is not r eceiving a clock signal from the DCE. Interface Name This settable information Þeld allows you to enter a name for the bridgeÕs active local port and its remote port.
NB-30 Bridging 3-8 Enabling and Disab ling Br idging Accessing Bridge Status Windo w Options At the top of the Bridge Status window , you can click on Bridge to access a menu that provides other bridg.
Bridge Statistics 3-9 NB-30 Bridging Y ou can also disable bridging across all ports or on your NB-30 fr om the Chassis V iew window . T o disable bridging at the device level from the Chassis V iew window: 1. Click on the Boar d Index (1) in the front panel display .
NB-30 Bridging 3-10 Bridge Statistics To access the NB-30 port Bridge Performance Graph window: 1. F rom the Br idge Status window , click on the appropriate port button ( Ethernet or Remote ). The P or t menu will appear . 2. Click on P erformance Graph.
Bridge Statistics 3-11 NB-30 Bridging Device Err ors The total number of frames (either inbound or outbound) containing errors which prevented them fr om being processed by the bridgeÕs interfaces. Nothing The selected scale is not currently in use. For the port level window , you can choose from among the following display options.
NB-30 Bridging 3-12 Bridge Statistics Out of Window Coll. (Ethernet Port Only) The number of collisions at this port that were out of the standar d collision window (51.
Bridge Statistics 3-13 NB-30 Bridging 2. Click on the desired fr ames mode: F or the Bridge P erformance Graph, the options are Frames Forwar ded , Frames Received , Frames Filtered , Device Err ors , or Nothing .
NB-30 Bridging 3-14 Bridge Statistics The following color-coded Þelds appear in the Bridge Summary Statistics window . The Þrst four statistics Þelds are also r epresented visually by a color-coded pie chart (gr een = forwarded packets, blue = Þlter ed packets, red = err or packets, magenta = other packets).
Bridge Statistics 3-15 NB-30 Bridging Figure 3-4. Ethernet Port Statistics W indow T o access the remote port Statistics window: 1. Click on Remote to re veal the P or t menu. 2. Choose Statistics... . The follo wing window , Figure 3-5 , will appear .
NB-30 Bridging 3-16 Bridge Statistics P or t Pac ket Statistics The following statistics Þelds appear in the Ethernet and Remote Port Statistics windows under the heading ÒPackets.Ó These are also graphically displayed in the pie chart (with the exception of Packets Received).
Bridge Spanning T ree 3-17 NB-30 Bridging CRC The total number of frames received by the port that had Cyclical Redundancy Check (CRC) errors. Framing The number of frames received by the port fr om the network that were misaligned Ñ that is, in which a byte of data in the packet contained less than 8 bits.
NB-30 Bridging 3-18 Bridge Spanning T ree In T ransparent bridging, Spanning T r ee must be used to prevent data loops (since in an Ethernet environment, a packet pr opagated down multiple paths would cause higher volumes of trafÞc and collisions that would cripple a network that relied on carrier sense and collision detection).
Bridge Spanning T ree 3-19 NB-30 Bridging Bridge Level P arameters Bridge Priority This Þeld displays the ÒpriorityÓ component of the NB-30Õs unique bridge identiÞer . The Spanning T ree Algorithm assigns each bridge a unique identiÞer , which is derived from the bridgeÕs MAC addr ess and the Priority .
NB-30 Bridging 3-20 Bridge Spanning T ree Protocol Displays the Spanning T ree Algorithm Protocol type the NB-30 is currently using. The choices are: ¥ 802.1 ¥ DEC (DEC Lanbridge 100) ¥ None The following four Þelds display values used for various Spanning T ree timers that are set at the Root Bridge and this bridge.
Bridge Spanning T ree 3-21 NB-30 Bridging Bridge P or t Level P arameters The following Þelds are applicable to each bridge port on the NB-30. Priority If two or more ports on the same bridge ar e connected to the same LAN segment, they will receive the same Root ID/Root Cost/Bridge ID information in ConÞguration BPDUs received at each port.
NB-30 Bridging 3-22 Bridge Spanning T ree T opology This indicates how many times the bridgeÕs T opology Change ßag has been changed since the NB-30 was last powered-up or initialized. The T opology Change ßag increments each time a bridge enters or leaves the network, or when the Root Bridge ID changes.
Bridge Spanning T ree 3-23 NB-30 Bridging Changing Hello Time If the bridge is the Root Bridge, or is attempting to become the Root, and you want to change the length of time the bridge waits between sending conÞguration BPDUs: 1. Highlight the Hello Time field, and type in a new v alue.
NB-30 Bridging 3-24 Filtering Database Changing P or t Priority T o change the part of the Port Priority used in priority comparisons: 1. Highlight the por t Priority field f or the desired por t, and enter the new priority identifier . Only valid he xadecimal numbers (0 to FF) are allo wed in this field.
Filtering Database 3-25 NB-30 Bridging Entries to the Source Address T able are one of four types: Permanent , Static , Dynamic , or Learned . ¥ Permanent entries are addr esses that you add to the Static Database (via the Filtering Database window) that are stor ed in the deviceÕs battery-backed RAM.
NB-30 Bridging 3-26 Filtering Database Figure 3-7. The Filtering Database W indow The following Þelds are listed in the top portion of the Filtering Database window . T ype Indicates the type of entry in the database: Static, Dynamic, or Permanent. Number Displays the current number of Static, Dynamic, and Permanent addr ess entries.
Filtering Database 3-27 NB-30 Bridging The following Þelds are applicable to the scr ollable Address Entry panel of Filtering Database entries. List The List checkboxes at the bottom of the window indicate whether the associated entry type (Dynamic, Static, or Permanent) will be displayed in the scrollable table of address entries.
NB-30 Bridging 3-28 Filtering Database Changing the T ype of Entry Y ou can change the type of any entry in the Þltering database to be a Static or Permanent entry . T o do so: 1. Click on the shado wed T ype button. A menu will appear with the three possible types to which the entry can be changed.
DSX-1 Summar y 3-29 NB-30 Bridging T o delete an address: 1. Click to highlight the address entry in the Address Entr y panel that you wish to delete from the filtering database.
NB-30 Bridging 3-30 DSX-1 Summar y Figure 3-9. Bridge DSX-1 Summary W indow Configuring, Running, and Checking the Loopbac k T est T o conÞgure and run the loopback test: 1.
Restoring Br idge Def aults 3-31 NB-30 Bridging T o halt a test in progr ess and return to the Bridge Status window , click on Cancel . The results of the test will be displayed in the status Þeld ne.
NB-30 Bridging 3-32 Resetting Bridge Counters ¥ All Spanning T ree Algorithm information screens back to their default values. Y ou must also restart the bridge for the new Spanning T r ee information to take effect.
Restar ting the Bridge 3-33 NB-30 Bridging.
NB-30 Bridging 3-34 Restarting the Br idge.
Inde x-1 Index A Acquired Database erasing 3-29 Address 3-27 Ageing T ime 3-26, 3-27 B BLK (Blocking) 2-6, 3-5 Board Menus 2-5 Boot Prom, r evision 2-3 Bridge Location 3-4 Port Address - Local Etherne.
Inde x Inde x-2 Frame Alignments 3-12 Frames Filtered 3-10 Forwarded 3-10 Received 3-10, 3-11 FWD (Forwarding) 2-6, 3-5 G Getting Help 1-6 Giant Packets 3-12 Global Call Center 1-7 H Hello T ime 3-20,.
Inde x-3 Inde x Protocol 3-20 R related documents 1-2 REM LOOP/LINK LOST 3-6 REM LOOP/LINK OK 3-6 REM LOOP/RED ALARM 3-6 REM LOOP/YELLOW ALARM 3-6 Reset Counters 3-32 Restart Bridge 3-32 Restore Defau.
Inde x Inde x-4.
Een belangrijk punt na aankoop van elk apparaat Cabletron Systems NB30 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Cabletron Systems NB30 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Cabletron Systems NB30 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Cabletron Systems NB30 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Cabletron Systems NB30 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Cabletron Systems NB30 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Cabletron Systems NB30 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Cabletron Systems NB30 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
